1 ## <a name="3 AFS administration"></a> 3 AFS administration
3 The Administration Section of the [[AFSFrequentlyAskedQuestions]].
11 <li><a href="#3 AFS administration"> 3 AFS administration</a><ul>
12 <li><a href="#3.01 Is there a version of xdm"> 3.01 Is there a version of xdm available with AFS authentication?</a></li>
13 <li><a href="#3.02 Is there a version of xloc"> 3.02 Is there a version of xlock available with AFS authentication?</a></li>
14 <li><a href="#3.03 What is /afs/@cell?"> 3.03 What is /afs/@cell?</a></li>
15 <li><a href="#3.04 Given that AFS data is loc"> 3.04 Given that AFS data is location independent, how does an AFS client determine which server houses the data its user is attempting to access?</a></li>
16 <li><a href="#3.05 How does AFS maintain cons"> 3.05 How does AFS maintain consistency on read-write files?</a></li>
17 <li><a href="#3.06 Which protocols does AFS u"> 3.06 Which protocols does AFS use?</a></li>
18 <li><a href="#3.07 Which TCP/IP ports and pro"> 3.07 Which TCP/IP ports and protocols do I need to enable in order to operate AFS through my Internet firewall?</a></li>
19 <li><a href="#3.08 Are setuid programs execut"> 3.08 Are setuid programs executable across AFS cell boundaries?</a></li>
20 <li><a href="#3.09 How can I run daemons with"> 3.09 How can I run daemons with tokens that do not expire?</a></li>
21 <li><a href="#3.10 Can I check my user's pass"> 3.10 Can I check my user's passwords for security purposes?</a></li>
22 <li><a href="#3.11 Is there a way to automati"> 3.11 Is there a way to automatically balance disk usage across fileservers?</a></li>
23 <li><a href="#3.12 Can I shutdown an AFS file"> 3.12 Can I shutdown an AFS fileserver without affecting users?</a></li>
24 <li><a href="#3.13 How can I set up mail deli"> 3.13 How can I set up mail delivery to users with $HOMEs in AFS?</a></li>
25 <li><a href="#3.14 Should I replicate a _Read"> 3.14 Should I replicate a ReadOnly volume on the same partition and server as the ReadWrite volume?</a></li>
26 <li><a href="#3.15 Should I start AFS before"> 3.15 Should I start AFS before NFS in /etc/inittab?</a></li>
27 <li><a href="#3.16 Will AFS run on a multi-ho"> 3.16 Will AFS run on a multi-homed fileserver?</a></li>
28 <li><a href="#3.17 Can I replicate my user's"> 3.17 Can I replicate my user's home directory AFS volumes?</a></li>
29 <li><a href="#3.18 What is the Andrew Benchma"> 3.18 What is the Andrew Benchmark?</a></li>
30 <li><a href="#3.19 Where can I find the Andre"> 3.19 Where can I find the Andrew Benchmark?</a></li>
31 <li><a href="#3.20 Is there a version of HP V"> 3.20 Is there a version of HP VUE login with AFS authentication?</a></li>
32 <li><a href="#3.21 How can I list which clien"> 3.21 How can I list which clients have cached files from a server?</a></li>
33 <li><a href="#3.22 Do Backup volumes require"> 3.22 Do Backup volumes require as much space as ReadWrite volumes?</a></li>
34 <li><a href="#3.23 Should I run timed on my A"> 3.23 Should I run timed on my AFS client?</a></li>
35 <li><a href="#3.24 Why should I keep /usr/vic"> 3.24 Why should I keep /usr/vice/etc/CellServDB current?</a></li>
36 <li><a href="#3.25 How can I keep /usr/vice/e"> 3.25 How can I keep /usr/vice/etc/CellServDB current?</a></li>
37 <li><a href="#3.26 How can I compute a list o"> 3.26 How can I compute a list of AFS fileservers?</a></li>
38 <li><a href="#3.27 How can I set up anonymous"> 3.27 How can I set up anonymous FTP login to access /afs?</a></li>
39 <li><a href="#3.28 Is the data sent over the n"> 3.28 Is the data sent over the network encrypted in AFS ?</a></li>
40 <li><a href="#3.29 What underlying filesystems"> 3.29 What underlying filesystems can I use for AFS ?</a></li>
41 <li><a href="#3.30 Compiling _OpenAFS"> 3.30 Compiling OpenAFS</a></li>
42 <li><a href="#3.31 Upgrading _OpenAFS"> 3.31 Upgrading OpenAFS</a></li>
43 <li><a href="#3.32 Debugging _OpenAFS"> 3.32 Debugging OpenAFS</a></li>
44 <li><a href="#3.33 Tuning client cache for hug"> 3.33 Tuning client cache for huge data</a></li>
45 <li><a href="#3.34 Settting up PAM with AFS"> 3.34 Settting up PAM with AFS</a></li>
46 <li><a href="#3.35 Setting up AFS key in KDC a"> 3.35 Setting up AFS key in KDC and KeyFile</a></li>
47 <li><a href="#3.36 Obtaining and getting asetk"> 3.36 Obtaining and getting asetkey compiled</a></li>
48 <li><a href="#3.37 afs_krb_get_lrealm() using"> 3.37 afs_krb_get_lrealm() using /usr/afs/etc/krb.conf</a></li>
49 <li><a href="#3.38 Moving from kaserver to Hei"> 3.38 Moving from kaserver to Heimdal KDC</a></li>
50 <li><a href="#3.39 Moving from KTH-KRB4 to Hei"> 3.39 Moving from KTH-KRB4 to Heimdal KDC</a></li>
51 <li><a href="#3.40 What are those bos(1) -type"> 3.40 What are those bos(1) -type values simple and cron?</a></li>
52 <li><a href="#3.41 KDC listens on port 88 inst"> 3.41 KDC listens on port 88 instead of 750</a></li>
53 <li><a href="#3.42 afsd gives me "Error -1 in"> 3.42 afsd gives me "Error -1 in basic initialization." on startup</a></li>
54 <li><a href="#3.43 Although I get krb tickets,"> 3.43 Although I get krb tickets, afslog doesn't give me tokens, I see UDP packets to port 4444</a></li>
55 <li><a href="#3.44 I get error message trhough"> 3.44 I get error message trhough syslogd: "afs: Tokens for user of AFS id 0 for cell foo.bar.baz are discarded (rxkad error=19270407)"</a></li>
56 <li><a href="#3.45 I get tickets and tokens, b"> 3.45 I get tickets and tokens, but still get Permission denied.</a></li>
57 <li><a href="#3.46 Recovering broken afs cache"> 3.46 Recovering broken afs cache on clients</a></li>
58 <li><a href="#3.47 What does it mean for a vol"> 3.47 What does it mean for a volume to not be in the VLDB?</a></li>
59 <li><a href="#3.48 What is a Volume Group?"> 3.48 What is a Volume Group?</a></li>
60 <li><a href="#3.49 What is a Clone?"> 3.49 What is a Clone?</a></li>
61 <li><a href="#3.50 What is a Shadow?"> 3.50 What is a Shadow?</a></li>
62 <li><a href="#3.51 Can I authenticate to my af"> 3.51 Can I authenticate to my afs cell using multiple kerberos Realms?</a></li>
63 <li><a href="#3.52 Is it a good idea to store"> 3.52 Is it a good idea to store mail in AFS?</a></li>
64 <li><a href="#3.53 How can I ensure that the"> 3.53 How can I ensure that the userids on client machines match the users' pts ids?</a></li>
65 <li><a href="#3.54 What is Fast Restart?"> 3.54 What is Fast Restart?</a></li>
66 <li><a href="#3.55 Reboot ?"> 3.55 Why does AFS reboot itself spontaneously at 4:00am every Sunday?</a></li>
67 <li><a href="#3.56 weak crypto">3.56 Why do I get an error -1765328370 when authenticating?</a></li>
78 ### <a name="3.01 Is there a version of xdm"></a><a name="3.01 Is there a version of xdm "></a> 3.01 Is there a version of xdm available with AFS authentication?
80 Yes, xdm can be found in:
82 <file:///afs/transarc.com/public/afs-contrib/tools/xdm> <ftp://ftp.transarc.com/pub/afs-contrib/tools/xdm/MANIFEST>
84 ### <a name="3.02 Is there a version of xloc"></a> 3.02 Is there a version of xlock available with AFS authentication?
86 Yes, xlock can be found in:
88 <file:///afs/transarc.com/public/afs-contrib/tools/xlock> <ftp://ftp.transarc.com/pub/afs-contrib/tools/xlock/MANIFEST>
90 ### <a name="3.03 What is /afs/@cell?"></a> 3.03 What is /afs/@cell?
92 It is a symbolic link pointing at /afs/$your\_cell\_name.
94 NB, @cell is not something that is provided by AFS. You may decide it is useful in your cell and wish to create it yourself.
96 /afs/@cell is useful because:
98 - If you look after more than one AFS cell, you could create the link in each cell then set your PATH as:
99 - PATH=$PATH:/afs/@cell/@sys/local/bin
101 - For most cells, it shortens the path names to be typed in thus reducing typos and saving time.
103 A disadvantage of using this convention is that when you cd into /afs/@cell then type "pwd" you see "/afs/@cell" instead of the full name of your cell. This may appear confusing if a user wants to tell a user in another cell the pathname to a file.
105 You could create your own /afs/@cell with the following:
109 [ -L /afs/@cell ] && echo We already have @cell! && exit
110 cell=$(cat /usr/vice/etc/ThisCell)
111 cd /afs/.${cell} && fs mkm temp root.afs
113 ln -s /afs/${cell} @cell
114 ln -s /afs/.${cell} .@cell # .@cell for RW path
115 cd /afs/.${cell} && fs rmm temp
116 vos release root.afs; fs checkv
118 <http://www-archive.stanford.edu/lists/info-afs/hyper95/0298.html>
120 ### <a name="3.04 Given that AFS data is loc"></a> 3.04 Given that AFS data is location independent, how does an AFS client determine which server houses the data its user is attempting to access?
122 The Volume Location Database (VLDB) is stored on AFS Database Servers and is ideally replicated across 3 or more Database Server machines. Replication of the Database ensures high availability and load balances the requests for the data. The VLDB maintains information regarding the current physical location of all volume data (files and directories) in the cell, including the IP address of the [[FileServer]], and the name of the disk partition the data is stored on.
124 A list of a cell's Database Servers is stored on the local disk of each AFS Client machine as: /usr/vice/etc/CellServDB
126 The Database Servers also house the Kerberos Authentication Database (encrypted user and server passwords), the Protection Database (user UID and protection group information) and the Backup Database (used by System Administrators to backup AFS file data to tape).
128 ### <a name="3.05 How does AFS maintain cons"></a> 3.05 How does AFS maintain consistency on read-write files?
130 AFS uses a mechanism called "callback".
132 Callback is a promise from the fileserver that the cache version of a file/directory is up-to-date. It is established by the fileserver with the caching of a file.
134 When a file is modified the fileserver breaks the callback. When the user accesses the file again the Cache Manager fetches a new copy if the callback has been broken.
136 The following paragraphs describe AFS callback mechanism in more detail:
138 If I open() fileA and start reading, and you then open() fileA, write() a change **\*\*and close() or fsync()\*\*** the file to get your changes back to the server - at the time the server accepts and writes your changes to the appropriate location on the server disk, the server also breaks callbacks to all clients to which it issued a copy of fileA.
140 So my client receives a message to break the callback on fileA, which it dutifully does. But my application (editor, spreadsheet, whatever I'm using to read fileA) is still running, and doesn't really care that the callback has been broken.
142 When something causes the application to read() more of the file the read() system call executes AFS cache manager code via the VFS switch, which does check the callback and therefore gets new copies of the data.
144 Of course, the application may not re-read data that it has already read, but that would also be the case if you were both using the same host. So, for both AFS and local files, I may not see your changes.
146 Now if I exit the application and start it again, or if the application does another open() on the file, then I will see the changes you've made.
148 This information tends to cause tremendous heartache and discontent - but unnecessarily so. People imagine rampant synchronization problems. In practice this rarely happens and in those rare instances, the data in question is typically not critical enough to cause real problems or crashing and burning of applications. Since 1985, we've found that the synchronization algorithm has been more than adequate in practice - but people still like to worry!
150 The source of worry is that, if I make changes to a file from my workstation, your workstation is not guaranteed to be notified until I close or fsync the file, at which point AFS guarantees that your workstation will be notified. This is a significant departure from NFS, in which no guarantees are provided.
152 Partially because of the worry factor and largely because of Posix, this will change in DFS. DFS synchronization semantics are identical to local file system synchronization.
154 [ DFS is the Distributed File System which is part of the Distributed ] [ Computing Environment (DCE). ]
156 ### <a name="3.06 Which protocols does AFS u"></a> 3.06 Which protocols does AFS use?
158 AFS may be thought of as a collection of protocols and software processes, nested one on top of the other. The constant interaction between and within these levels makes AFS a very sophisticated software system.
160 At the lowest level is the UDP protocol, which is part of TCP/IP. UDP is the connection to the actual network wire. The next protocol level is the remote procedure call (RPC). In general, RPCs allow the developer to build applications using the client/server model, hiding the underlying networking mechanisms. AFS uses Rx, an RPC protocol developed specifically for AFS during its development phase at Carnegie Mellon University.
162 Above the RPC is a series of server processes and interfaces that all use Rx for communication between machines. Fileserver, volserver, upserver, upclient, and bosserver are server processes that export RPC interfaces to allow their user interface commands to request actions and get information. For example, a bos status command will examine the bos server process on the indicated file server machine.
164 Database servers use ubik, a replicated database mechanism which is implemented using RPC. Ubik guarantees that the copies of AFS databases of multiple server machines remain consistent. It provides an application programming interface (API) for database reads and writes, and uses RPCs to keep the database synchronized. The database server processes, vlserver, kaserver, and ptserver, reside above ubik. These processes export an RPC interface which allows user commands to control their operation. For instance, the pts command is used to communicate with the ptserver, while the command klog uses the kaserver's RPC interface.
166 Some application programs are quite complex, and draw on RPC interfaces for communication with an assortment of processes. Scout utilizes the RPC interface to file server processes to display and monitor the status of file servers. The uss command interfaces with kaserver, ptserver, volserver and vlserver to create new user accounts.
168 The Cache Manager also exports an RPC interface. This interface is used principally by file server machines to break callbacks. It can also be used to obtain Cache Manager status information. The program cmdebug shows the status of a Cache Manager using this interface.
170 For additional information, Section 1.5 of the AFS System Administrator's Guide and the April 1990 Cache Update contain more information on ubik. Udebug information and short descriptions of all debugging tools were included in the January 1991 Cache Update. Future issues will discuss other debugging tools in more detail.
172 [ source: <ftp://ftp.transarc.com/pub/afsug/newsletter/apr91> ] [ Copyright 1991 Transarc Corporation ]
174 ### <a name="3.07 Which TCP/IP ports and pro"></a> 3.07 Which TCP/IP ports and protocols do I need to enable in order to operate AFS through my Internet firewall?
176 Assuming you have already taken care of nameserving, you may wish to use an Internet timeserver for Network Time Protocol [[[NTP|Main/FurtherReading#NTP]]] and the question about [[timed|Main/WebHome#NTP]]:
180 A list of NTP servers is available via anonymous FTP from:
182 - <http://www.eecis.udel.edu/~mills/ntp/servers.html>
184 For further details on NTP see: <http://www.eecis.udel.edu/~ntp/>
186 For a "minimal" AFS service which does not allow inbound or outbound klog:
188 cachemanager 4711/udp (only if you use the arla-client instead of OpenAFS)
190 cachemanager 7001/udp
198 (Ports in the 7020-7029 range are used by the AFS backup system, and won't be needed by external clients performing simple file accesses.)
200 Additionally, for "klog" to work through the firewall you need to allow inbound and outbound UDP on ports >1024 (probably 1024<port<2048 would suffice depending on the number of simultaneous klogs).
202 See also: <http://www-archive.stanford.edu/lists/info-afs/hyper95/0874.html>
204 ### <a name="3.08 Are setuid programs execut"></a> 3.08 Are setuid programs executable across AFS cell boundaries?
206 By default, the setuid bit is ignored but the program may be run (without setuid privilege).
208 It is possible to configure an AFS client to honour the setuid bit. This is achieved by root running:
210 root@toontown # fs setcell -cell $cellname -suid
212 (where $cellname is the name of the foreign cell. Use with care!).
214 NB: making a program setuid (or setgid) in AFS does **not** mean that the program will get AFS permissions of a user or group. To become AFS authenticated, you have to klog. If you are not authenticated, AFS treats you as "system:anyuser".
216 ### <a name="3.09 How can I run daemons with"></a> 3.09 How can I run daemons with tokens that do not expire?
218 It is not a good idea to run with tokens that do not expire because this would weaken one of the security features of Kerberos.
220 A better approach is to re-authenticate just before the token expires.
222 There are two examples of this that have been contributed to afs-contrib. The first is "reauth":
224 - <file:///afs/transarc.com/public/afs-contrib/tools/reauth/>
225 - <ftp://ftp.transarc.com/pub/afs-contrib/tools/reauth/MANIFEST>
226 - <ftp://ftp.andrew.cmu.edu/pub/AFS-Tools/reauth-0.0.5.tar.gz>
230 <file:///afs/transarc.com/public/afs-contrib/pointers/UMich-lat-authenticated-batch-jobs> <ftp://ftp.transarc.com/pub/afs-contrib/pointers/UMich-lat-authenticated-batch-jobs>
232 Another collection of tools was [mentioned](https://lists.openafs.org/pipermail/openafs-info/2002-October/006353.html) by [[DanielClark]]:
234 Another option is [OpenPBS](http://www.openpbs.org/) and [Password Storage and Retrieval](http://www.lam-mpi.org/software/psr/) (PSR), where you encrypt your AFS password with a public key and put it in your home directory, and trusted machine(s) which have the private key on local disk then decrypt your password and run your job. MIT uses a variant of this (e.g. [a](http://web.mit.edu/longjobs/www/) & [b](http://mit.edu/longjobs-dev/notebook/)) that uses their own code (see [longjobs documentation](http://web.mit.edu/longjobs-dev/doc/netsec.txt) sections III and IV) instead of PSR.
236 ### <a name="3.10 Can I check my user's pass"></a> 3.10 Can I check my user's passwords for security purposes?
238 Yes. Alec Muffett's Crack tool (at version 4.1f) has been converted to work on the Transarc kaserver database. This modified Crack (AFS Crack) is available via anonymous ftp from:
240 - <ftp://export.acs.cmu.edu/pub/crack.tar.Z>
241 - <ftp://ftp.andrew.cmu.edu/pub/AFS-Tools/crack.tar.Z>
243 and is known to work on: pmax\_\* sun4\*\_\* hp700\_\* rs\_aix\* next\_\*
245 It uses the file /usr/afs/db/kaserver.DB0, which is the database on the kaserver machine that contains the encrypted passwords. As a bonus, AFS Crack is usually two to three orders of magnitude faster than the standard Crack since there is no concept of salting in a Kerberos database.
247 On a normal UNIX /etc/passwd file, each password can have been encrypted around 4096 (2^12) different saltings of the crypt(3) algorithm, so for a large number of users it is easy to see that a potentially large (up to 4095) number of seperate encryptions of each word checked has been avoided.
249 Author: Dan Lovinger Contact: Derrick J. Brashear <shadow+@andrew.cmu.edu>
251 <table border="1" cellpadding="0" cellspacing="0">
254 <td> AFS Crack does not work for MIT Kerberos Databases. The author is willing to give general guidance to someone interested in doing the (probably minimal) amount of work to port it to do MIT Kerberos. The author does not have access to a MIT Kerberos server to do this. </td>
258 ### <a name="3.11 Is there a way to automati"></a> 3.11 Is there a way to automatically balance disk usage across fileservers?
260 Yes. There is a tool, balance, which does exactly this. It can be retrieved via anonymous ftp from:
262 - <ftp://ftp.andrew.cmu.edu/pub/AFS-Tools/balance-1.1b.tar.gz>
264 Actually, it is possible to write arbitrary balancing algorithms for this tool. The default set of "agents" provided for the current version of balance balance by usage, # of volumes, and activity per week, the latter currently requiring a source patch to the AFS volserver. Balance is highly configurable.
266 Author: Dan Lovinger Contact: Derrick Brashear <shadow+@andrew.cmu.edu>
268 ### <a name="3.12 Can I shutdown an AFS file"></a> 3.12 Can I shutdown an AFS fileserver without affecting users?
270 Yes, this is an example of the flexibility you have in managing AFS.
272 Before attempting to shutdown an AFS fileserver you have to make some arrangements that any services that were being provided are moved to another AFS fileserver:
274 1. Move all AFS volumes to another fileserver. (Check you have the space!) This can be done "live" while users are actively using files in those volumes with no detrimental effects.
276 1. Make sure that critical services have been replicated on one (or more) other fileserver(s). Such services include:
277 - kaserver - Kerberos Authentication server
278 - vlserver - Volume Location server
279 - ptserver - Protection server
280 - buserver - Backup server
282 It is simple to test this before the real shutdown by issuing:
284 bos shutdown $server $service
286 where: $server is the name of the server to be shutdown
287 and $service is one (or all) of: kaserver vlserver ptserver buserver
289 Other points to bear in mind:
291 - "vos remove" any RO volumes on the server to be shutdown. Create corresponding RO volumes on the 2nd fileserver after moving the RW. There are two reasons for this:
292 1. An RO on the same partition ("cheap replica") requires less space than a full-copy RO.
293 2. Because AFS always accesses RO volumes in preference to RW, traffic will be directed to the RO and therefore quiesce the load on the fileserver to be shutdown.
295 - If the system to be shutdown has the lowest IP address there may be a brief delay in authenticating because of timeout experienced before contacting a second kaserver.
297 ### <a name="3.13 How can I set up mail deli"></a> 3.13 How can I set up mail delivery to users with $HOMEs in AFS?
299 There are many ways to do this. Here, only two methods are considered:
301 Method 1: deliver into local filestore
303 This is the simplest to implement. Set up your mail delivery to append mail to /var/spool/mail/$USER on one mailserver host. The mailserver is an AFS client so users draw their mail out of local filestore into their AFS $HOME (eg: inc).
305 Note that if you expect your (AFS unauthenticated) mail delivery program to be able to process .forward files in AFS $HOMEs then you need to add "system:anyuser rl" to each $HOMEs ACL.
309 - Simple to implement and maintain.
310 - No need to authenticate into AFS.
314 - It doesn't scale very well.
315 - Users have to login to the mailserver to access their new mail.
316 - Probably less secure than having your mailbox in AFS.
317 - System administrator has to manage space in /var/spool/mail.
319 Method 2: deliver into AFS
321 This takes a little more setting up than the first method.
323 First, you must have your mail delivery daemon AFS authenticated (probably as "postman"). The reauth example in afs-contrib shows how a daemon can renew its token. You will also need to setup the daemon startup soon after boot time to klog (see the -pipe option).
325 Second, you need to set up the ACLs so that "postman" has lookup rights down to the user's $HOME and "lik" on $HOME/Mail.
329 - Scales better than first method.
330 - Delivers to user's $HOME in AFS giving location independence.
331 - Probably more secure than first method.
332 - User responsible for space used by mail.
336 - More complicated to set up.
337 - Need to correctly set ACLs down to $HOME/Mail for every user.
338 - Probably need to store postman's password in a file so that the mail delivery daemon can klog after boot time. This may be OK if the daemon runs on a relatively secure host.
340 An example of how to do this for IBM RISC System/6000 is auth-sendmail. A beta test version of auth-sendmail can be found in:
342 <file:///afs/transarc.com/public/afs-contrib/doc/faq/auth-sendmail.tar.Z> <ftp://ftp.transarc.com/pub/afs-contrib/doc/faq/auth-sendmail.tar.Z>
344 ### <a name="3.14 Should I replicate a _Read"></a> 3.14 Should I replicate a [[ReadOnly]] volume on the same partition and server as the [[ReadWrite]] volume?
346 Yes, Absolutely! It improves the robustness of your served volumes.
348 If [[ReadOnly]] volumes exist (note use of term **exist** rather than **are available**), Cache Managers will **never** utilize the [[ReadWrite]] version of the volume. The only way to access the RW volume is via the "dot" path (or by special mounting).
350 This means if **all** RO copies are on dead servers, are offline, are behind a network partition, etc, then clients will not be able to get the data, even if the RW version of the volume is healthy, on a healthy server and in a healthy network.
352 However, you are **very** strongly encouraged to keep one RO copy of a volume on the **same server and partition** as the RW. There are two reasons for this:
354 1. The RO that is on the same server and partition as the RW is a clone (just a copy of the header - not a full copy of each file). It therefore is very small, but provides access to the same set of files that all other (full copy) [[ReadOnly]] volume do. Transarc trainers refer to this as the "cheap replica".
355 2. To prevent the frustration that occurs when all your ROs are unavailable but a perfectly healthy RW was accessible but not used.
357 If you keep a "cheap replica", then by definition, if the RW is available, one of the RO's is also available, and clients will utilize that site.
359 ### <a name="3.15 Should I start AFS before"></a><a name="3.15 Should I start AFS before "></a> 3.15 Should I start AFS before NFS in /etc/inittab?
361 Yes, it is possible to run both AFS and NFS on the same system but you should start AFS first.
363 In IBM's AIX 3.2, your /etc/inittab would contain:
365 rcafs:2:wait:/etc/rc.afs > /dev/console 2>&1 # Start AFS daemons
366 rcnfs:2:wait:/etc/rc.nfs > /dev/console 2>&1 # Start NFS daemons
368 With AIX, you need to load NFS kernel extensions before the AFS KEs in /etc/rc.afs like this:
371 # example /etc/rc.afs for an AFS fileserver running AIX 3.2
373 echo "Installing NFS kernel extensions (for AFS+NFS)"
374 /etc/gfsinstall -a /usr/lib/drivers/nfs.ext
375 echo "Installing AFS kernel extensions..."
376 D=/usr/afs/bin/dkload
377 ${D}/cfgexport -a ${D}/export.ext
378 ${D}/cfgafs -a ${D}/afs.ext
379 /usr/afs/bin/bosserver &
381 ### <a name="3.16 Will AFS run on a multi-ho"></a> 3.16 Will AFS run on a multi-homed fileserver?
383 (multi-homed = host has more than one network interface.)
385 Yes, it will. However, AFS was designed for hosts with a single IP address. There can be problems if you have one host name being resolved to several IP addresses.
387 Transarc suggest designating unique hostnames for each network interface. For example, a host called "spot" has two tokenring and one ethernet interfaces: spot-tr0, spot-tr1, spot-en0. Then, select which interface will be used for AFS and use that hostname in the [[CellServDB]] file (eg: spot-tr0).
389 You also have to remember to use the AFS interface name with any AFS commands that require a server name (eg: vos listvol spot-tr0).
391 There is a more detailed discussion of this in the August 1993 issue of "Cache Update" (see: <ftp://ftp.transarc.com/pub/afsug/newsletter/aug93>).
393 The simplest way of dealing with this is to make your AFS fileservers single-homed (eg only use one network interface).
395 At release 3.4 of AFS, it is possible to have multi-homed fileservers (but _not_ multi-homed database servers).
397 ### <a name="3.17 Can I replicate my user's"></a><a name="3.17 Can I replicate my user's "></a> 3.17 Can I replicate my user's home directory AFS volumes?
401 Users with $HOMEs in /afs normally have an AFS [[ReadWrite]] volume mounted in their home directory.
403 You can replicate a RW volume but only as a [[ReadOnly]] volume and there can only be one instance of a [[ReadWrite]] volume.
405 In theory, you could have RO copies of a user's RW volume on a second server but in practice this won't work for the following reasons:
407 a) AFS has built-in bias to always access the RO copy of a RW volume.
408 So the user would have a ReadOnly $HOME which is not too useful!
410 b) Even if a) was not true you would have to arrange frequent
411 synchronisation of the RO copy with the RW volume (for example:
412 "vos release user.fred; fs checkv") and this would have to be
413 done for all such user volumes.
415 c) Presumably, the idea of replicating is to recover the $HOME
416 in the event of a server crash. Even if a) and b) were not
417 problems consider what you might have to do to recover a $HOME:
419 1) Create a new RW volume for the user on the second server
420 (perhaps named "user.fred.2").
422 2) Now, where do you mount it?
424 The existing mountpoint cannot be used because it already has
425 the ReadOnly copy of the original volume mounted there.
427 Let's choose: /afs/MyCell/user/fred.2
429 3) Copy data from the RO of the original into the new RW volume
432 4) Change the user's entry in the password file for the new $HOME:
433 /afs/MyCell/user/fred.2
435 You would have to attempt steps 1 to 4 for every user who had
436 their RW volume on the crashed server. By the time you had done
437 all of this, the crashed server would probably have rebooted.
439 The bottom line is: you cannot replicate $HOMEs across servers.
441 ### <a name="3.18 What is the Andrew Benchma"></a> 3.18 What is the Andrew Benchmark?
443 "It is a script that operates on a collection of files constituting an application program. The operations are intended to represent typical actions of an average user. The input to the benchmark is a source tree of about 70 files. The files total about 200 KB in size. The benchmark consists of five distinct phases:
445 I MakeDir - Construct a target subtree that is identical to the
447 II Copy - Copy every file from the source subtree to the target subtree.
448 III ScanDir - Traverse the target subtree and examine the status
450 IV ReadAll - Scan every byte of every file in the target subtree.
451 V Make - Complete and link all files in the target subtree."
453 Source: <file:///afs/transarc.com/public/afs-contrib/doc/benchmark/Andrew.Benchmark.ps> <ftp://ftp.transarc.com/pub/afs-contrib/doc/benchmark/Andrew.Benchmark.ps>
455 ### <a name="3.19 Where can I find the Andre"></a> 3.19 Where can I find the Andrew Benchmark?
457 From Daniel Joseph Barnhart Clark's [message](http://lists.openafs.org/pipermail/openafs-info/2004-April/012942.html):
459 It's linked to from <http://www.citi.umich.edu/projects/linux-scalability/tools.html>; CITI also has some useful mods at <http://www.citi.umich.edu/projects/nfs-perf/results/cmarion/>.
461 ### <a name="3.20 Is there a version of HP V"></a> 3.20 Is there a version of HP VUE login with AFS authentication?
463 Yes, the availability of this is described in: <file:///afs/transarc.com/public/afs-contrib/pointers/HP-VUElogin.txt> <ftp://ftp.transarc.com/pub/afs-contrib/pointers/HP-VUElogin.txt>
465 If you don't have access to the above, please contact Rajeev Pandey of Hewlett Packard whose email address is <rpandey@cv.hp.com>.
467 ### <a name="3.21 How can I list which clien"></a> 3.21 How can I list which clients have cached files from a server?
469 By using the following script:
474 # AUTHOR Rainer Toebbicke <rtb@dxcern.cern.ch>
476 # PURPOSE Display AFS clients which have grabbed files from a server
479 echo "Usage: $0 <afs_server 1> ... <afsserver n>"
483 /usr/afsws/etc/rxdebug -servers $n -allconn
484 done | grep '^Connection' | \
485 while read x y z ipaddr rest; do echo $ipaddr; done | sort -u |
486 while read ipaddr; do
488 n="`nslookup $ipaddr`"
496 ### <a name="3.22 Do Backup volumes require"></a><a name="3.22 Do Backup volumes require "></a> 3.22 Do Backup volumes require as much space as [[ReadWrite]] volumes?
500 The technique used is to create a new volume, where every file in the RW copy is pointed to by the new backup volume. The files don't exist in the BK, only in the RW volume. The backup volume therefore takes up very little space.
502 If the user now starts modifying data, the old copy must not be destroyed.
504 There is a Copy-On-Write bit in the vnode - if the fileserver writes to a vnode with the bit on it allocates a new vnode for the data and turns off the COW bit. The BK volume hangs onto the old data, and the RW volume slowly splits itself away over time.
506 The BK volume is re-synchronised with the RW next time a "vos backupsys" is run.
508 The space needed for the BK volume is directly related to the size of all files changed in the RW between runs of "vos backupsys".
510 ### <a name="3.23 Should I run timed on my A"></a> 3.23 Should I run timed on my AFS client?
514 <a name="NTP"></a> The AFS Servers make use of NTP [[[NTP|Main/FurtherReading#NTP]]] to synchronise time each other and typically with one or more external NTP servers. By default, clients synchronize their time with one of the servers in the local cell. Thus all the machines participating in the AFS cell have an accurate view of the time.
516 For further details on NTP see: <http://www.eecis.udel.edu/~ntp/>. The latest version is 4.1, dated August 2001, which is **much** more recent that the version packaged with Transarc AFS.
518 A list of NTP servers is available via anonymous FTP from:
520 - <http://www.eecis.udel.edu/~mills/ntp/servers.html>
522 The default time setting behavior of the AFS client can be disabled by specifying the `-nosettime` argument to [afsd](http://www.transarc.ibm.com/Library/documentation/afs/3.5/unix/cmd/cmd53.htm). This is recommended for AFS servers which are also configured as clients (because servers normally run NTP daemons) and for clients that run NTP.
524 ### <a name="3.24 Why should I keep /usr/vic"></a> 3.24 Why should I keep /usr/vice/etc/CellServDB current?
526 On AFS clients, /usr/vice/etc/CellservDB, defines the cells and (their servers) that can be accessed via /afs.
528 Over time, site details change: servers are added/removed or moved onto new network addresses. New sites appear.
530 In order to keep up-to-date with such changes, the [[CellservDB]] file on each AFS client should be kept consistent with some master copy (at your site).
532 As well as updating [[CellservDB]], your AFS administrator should ensure that new cells are mounted in your cell's root.afs volume.
534 If a cell is added to [[CellServDB]] then the **client** must either be restared or you must the AFS command "fs newcell -cell .. -servers ... ...".
536 ### <a name="3.25 How can I keep /usr/vice/e"></a> 3.25 How can I keep /usr/vice/etc/CellServDB current?
538 Do a daily copy from a master source and update the AFS kernel sitelist.
540 One good master source is the grand.central.org [[CellServDB]], available from <http://grand.central.org/dl/cellservdb/CellServDB> or <file:/afs/openafs.org/service/CellServDB> (N.B. update to /afs/grand.central.org path when available). You can send updates for this to <cellservdb@central.org>.
542 The client [[CellServDB]] file must not reside under /afs and is best located in local filespace.
544 Simply updating a client [[CellServDB]] file is not enough. You also need to update the AFS kernel sitelist by either: 1 rebooting the client or 1 running "fs newcell $cell\_name $server\_list" for each site in the [[CellServDB]] file.
546 A script to update the AFS kernel sitelist on a running system is newCellServDB.
548 <file:///afs/ece.cmu.edu/usr/awk/Public/newCellServDB> <ftp://ftp.ece.cmu.edu/pub/afs-tools/newCellServDB>
550 One way to distribute [[CellServDB]] is to have a root cron job on each AFS client copy the file then run newCellServDB.
556 # NAME syncCellServDB
557 # PURPOSE Update local CellServDB file and update AFS kernel sitelist
558 # USAGE run by daily root cron job eg:
559 # 0 3 * * * /usr/local/sbin/syncCellServDB
561 # NOTE "@cell" is a symbolic link to /afs/$this_cell_name
563 src=/afs/@cell/service/etc/CellServDB
564 dst=/usr/vice/etc/CellServDB
565 xec=/usr/local/sbin/newCellServDB
566 log=/var/log/syncCellServDB
568 if [ -s ${src} ]; then
569 if [ ${src} -nt ${dst} ]; then
570 cp $dst ${dst}- && cp $src $dst && $xec 2>&1 >$log
572 echo "master copy no newer: no processing to be done" >$log
575 echo "zero length file: ${src}" >&2
578 ### <a name="3.26 How can I compute a list o"></a> 3.26 How can I compute a list of AFS fileservers?
580 Here is a Bourne shell command to do it (it will work in GNU bash and the Korn shell, too):
582 stimpy@nick $ vos listvldb -cell `cat /usr/vice/etc/ThisCell` \\
583 | awk '(/server/) {print $2}' | sort -u
585 ### <a name="3.27 How can I set up anonymous"></a> 3.27 How can I set up anonymous FTP login to access /afs?
587 The easiest way on a primarily "normal" machine (where you don't want to have everything in AFS) is to actually mount root.cell under ~ftp, and then symlink /afs to ~ftp/afs or whatever. It's as simple as changing the mountpoint in /usr/vice/etc/cacheinfo and restarting afsd.
589 Note that when you do this, anon ftp users can go anywhere system:anyuser can (or worse, if you're using IP-based ACLs and the ftp host is PTS groups). The only "polite" solution I've arrived at is to have the ftp host machine run a minimal [[CellServDB]] and police my ACLs tightly.
591 Alternatively, you can make ~ftp an AFS volume and just mount whatever you need under that - this works well if you can keep everything in AFS, and you don't have the same problems with anonymous "escapes" into /afs.
593 Unless you need to do authenticating ftp, you are _strongly_ recommended using wu-ftpdv2.4 (or better).
595 ### <a name="3.28 Is the data sent over the n"></a> 3.28 Is the data sent over the network encrypted in AFS ?
597 There is still no easy way to do this in Transarc AFS, but [[OpenAFS]] now has a "fs" subcommand to turn on encryption of regular file data sent and received by a client. This is a per client setting that persist until reboot. No server actions are needed to support this change. The syntax is:
603 Note that this only encrypts network traffic between the client and server. The data on the server's disk is not encrypted nor is the data in the client's disk cache. The encryption algorithm used is [fcrypt](http://surfvi.com/~ota/fcrypt-paper.txt), which is a DES variant.
605 Getting encryption enabled by default:
607 - [[RedHat]] Linux: ([src](https://lists.openafs.org/pipermail/openafs-info/2002-July/005085.html)) change the last line of /etc/sysconfig/afs to `AFS_POST_INIT="/usr/bin/fs setcrypt on"`
608 - Windows ([src](https://lists.openafs.org/pipermail/openafs-info/2003-June/009416.html)) set the following registry value named `SecurityLevel` under `HKLM\SYSTEM\CurrentControlSet\Services\TransarcAFSDaemon\Parameters` to 2.
610 I have not tested either of these procedures. -- [[TedAnderson]] - 05 Jun 2003
612 ### <a name="3.29 What underlying filesystems"></a> 3.29 What underlying filesystems can I use for AFS ?
614 See also [[SupportedConfigurations]].
616 You need to distinguish between the filesystem used by the file server to store the actual AFS data (by convention in /vicep?) and the filesystem used by the client cache manager to cache files.
618 Fileserver is started by bosserver. It depends, what ./configure switches were used during compilation from sources. To be always on the safe side, use --enable-namei-fileserver configure flag. That will give you fileserver binary which can act on any /vicep? partition regardless it's filesystem type. With the new namei file server you can basically use any filesystem you want. The namei file server does not do any fancy stuff behind the scenes but only accesses normal files (their names are a bit strange though).
620 The opposite to namei fileserver is inode based nameserver. According to openafs-devel email list, it gave on some Solaris box 10% speedup over the namei based server. The namei based fileserver cannot run on every filesystem, as it stores some internal afs-specific data into the filesystem. Typically, /sbin/fsck distributed withthe operating system zaps these data. Inode based fileserver directly operates on the inodes of the underlying file system which therefore has to fully support the inode abstraction scheme. The the Administrators Guide for more details (they differ from system to system).
622 On the client side where you run /usr/afs/etc/afsd as a kernel process, you always have to use a file system supporting the inode abstraction for the cache (usually /usr/vice/cache) since the cache manager references files by their inode. Fortunately, it does not do such tricky stuff as the inode based fileserver.
624 The following file systems have been reported _not_ to work for the AFS client cache:
628 - advfs (Tru64), it works but gives cachecurruption
629 - efs (SGI) - IBM AFS does support efs, but openafs doesn't have a license for that.
631 - Patch committed to cvs around 6/2003 will now enforce this in some cases and generate a warning to the user if the filesystem type is wrong.
633 The following file systems have been reported to work for the AFS client cache:
638 - xfs (at least on IRIX 6.5)
639 - ufs (Solaris, [[Tru64Unix]])
641 ### <a name="3.30 Compiling _OpenAFS"></a> 3.30 Compiling [[OpenAFS]]
643 The kernel parts on Solaris have to be compiled with Sun cc, same for other platforms, i.e. you need same compiler used to compile kernel to compile your afs modules. [[Tru64Unix]] doesn't support modules, so you have to edit kernel config files and link statically into kernel. Kernel module insertion works fine on Linux, Solaris, Irix ...
645 ./configure --enable-transarc-paths=/usr/etc --with-afs-sysname=i386_linux24
649 ... and continue the install process described in IBM AFS documentation. If you do "make install", you will end up with some stuff installed into /usr/local but something not, regardless the --enable-transarc-paths option ... "make install" it's messy.
651 ### <a name="3.31 Upgrading _OpenAFS"></a> 3.31 Upgrading [[OpenAFS]]
653 Upgrade of AFS on Linux
655 /etc/rc.d/init.d/afs stop
656 cd root.client/usr/vice/etc
657 tar cvf - . | (cd /usr/vice/etc; tar xfp -)
658 cp -p afs.rc /etc/rc.d/init.d/afs
659 cp ../../../../lib/pam_afs.krb.so.1 /lib/security
660 cd ../../../../root.server/usr/afs
661 tar cvf - . | (cd /usr/afs; tar xfp -)
662 # echo "auth sufficient /lib/security/pam_afs.so try_first_pass \
663 ignore_root" >> /etc/pam.d/login
665 vim /etc/sysconfig/afs
666 ln -s pam_afs.krb.so.1 pam_afs.so
668 ln -s ../init.d/afs S99afs
670 ln -s ../init.d/afs K01afs
671 cp /usr/vice/etc/afs.conf /etc/sysconfig/afs
672 /etc/rc.d/init.d/afs start
674 Upgrade of AFS on Solaris 2.6
679 cd root.server/usr/afs
680 tar cvf - ./bin | (cd /usr/afs; tar xfp -)
682 cp root.client/usr/vice/etc/modload/libafs.nonfs.o /kernel/fs/afs
683 cp root.server/etc/vfsck /usr/lib/fs/afs/fsck
684 cd root.client/usr/vice
685 tar cvf - ./etc | (cd /usr/vice; tar xf -)
687 cp lib/pam_afs.krb.so.1 /usr/lib/security
688 cp lib/pam_afs.so.1 /usr/lib/security
693 Upgrade of AFS on Irix 6.5
695 /etc/chkconfig -f afsserver off
696 /etc/chkconfig -f afsclient off
697 /etc/chkconfig -f afsml off
698 /etc/chkconfig -f afsxnfs off
700 cd root.server/usr/afs
701 tar cvf - ./bin | (cd /usr/afs; tar xfp -)
703 cp root.client/usr/vice/etc/sgiload/libafs.IP22.nonfs.o /usr/vice/etc/sgiload
704 echo "AFS will be compiled statically into kernel"
705 echo "otherwise skip following lines and use chkconfig afsml on"
706 cp root.client/bin/afs.sm /var/sysgen/system
707 cp root.client/bin/afs /var/sysgen/master.d
708 echo "The next file comes from openafs-*/src/libafs/STATIC.*"
709 cp root.client/bin/libafs.IP22.nonfs.a /var/sysgen/boot/afs.a
712 echo "end of static kernel modifications"
713 cd root.client/usr/vice/etc
714 echo "Delete any of the modload/ files which don't fit your platform if you need space"
715 echo "These files originate from openafs-*/src/libafs/MODLOAD.*"
716 tar cvf - . | (cd /usr/vice/etc; tar xf -)
717 /etc/chkconfig -f afsserver on
718 /etc/chkconfig -f afsclient on
719 # /etc/chkconfig -f afsml on - afs is compiled statically into kernel, so leave afsml off
720 /etc/chkconfig -f afsml off
721 /etc/chkconfig -f afsxnfs off
724 Upgrade of AFS on [[Tru64Unix]]
726 cd root.server/usr/afs/
727 tar cvf - ./bin | (cd /usr/afs; tar xfp -)
728 cd ../../../root.client/bin
729 cp ./libafs.nonfs.o /usr/sys/BINARY/afs.mod
730 ls -la /usr/sys/BINARY/afs.mod
732 cd ../../root.client/usr/vice
733 cp etc/afsd /usr/vice/etc/afsd
734 cp etc/C/afszcm.cat /usr/vice/etc/C/afszcm.cat
736 ### <a name="3.32 Debugging _OpenAFS"></a> 3.32 Debugging [[OpenAFS]]
738 In case of troubles when you need only fileserver process to run (to be able to debug), run the lwp fileserver instead of the pthreads fileserver (src/viced/fileserver instead of src/tviced/fileserver if you have a buildtree handy):
740 cp src/viced/fileserver /usr/afs/bin (or wherever)
742 bos restart calomys fs -local
744 ... then attach with gdb
746 To debug if client running afsd kernel process talks to the servers from [[CellServDB]], do:
748 tcpdump -vv -s 1500 port 7001
752 fileserver 7000/udp # fileport (FILESERVICE)
753 afscb 7001/udp # kernel extensions
754 afsprot 7002/udp # ptserver (PROTSERVICE)
755 afsvldb 7003/udp # vlserver (VLDBSERVICE)
756 afskauth 7004/udp # kaserver (KAUTHSERVICE)
757 afsvol 7005/udp # volserver (VOLUMESERVICE)
758 afserror 7006/udp # ERRORSERVICE
759 afsnanny 7007/udp # bosserver (NANNYSERVICE)
760 afsupdate 7008/udp # upserver (UPDATESERVICE)
761 afsrmtsys 7009/udp # RMTSYSSERVICE
763 When tcpdump doesn't help, try:
765 fstrace setset cm -active; make your error happen; fstrace dump cm
767 ### <a name="3.33 Tuning client cache for hug"></a> 3.33 Tuning client cache for huge data
769 Use on afsd command line -chunk 17 or greater. Be carefull, with certain cache sizes afsd crashes on startup (Linux, [[Tru64Unix]] at least). It is possibly when dcache is too small. Go for:
771 /usr/vice/etc/afsd -nosettime -stat 12384 -chunk 19
773 > So I ran the full suite of iozone tests (13), but at a single file
774 > size (128M) and one record size (64K). I set the AFS cache size to > 80000K for both memcache and diskcache.
776 Note that memcache size and diskcache size are different things.
777 In the case of memcache, a fixed number of chunks are allocated
778 in memory, such that numChunks * chunkSize = memCacheSize. In
779 the case of disk cache, there are a lot more chunks, because the
780 disk cache assumes not every chunk will be filled (the underlying
781 filesystem handles disk block allocation for us). Thus, when you
782 have small file segments, they use up an entire chunk worth of
783 cache in the memcache case, but only their size worth of cache
784 in the diskcache cache.
788 ### <a name="3.34 Settting up PAM with AFS"></a> 3.34 Settting up PAM with AFS
792 auth sufficient /lib/security/pam_afs.so debug try_first_pass ignore_root debug
793 auth required /lib/security/pam_env.so
794 auth sufficient /lib/security/pam_unix.so likeauth nullok
795 auth required /lib/security/pam_deny.so
797 account required /lib/security/pam_unix.so
799 password required /lib/security/pam_cracklib.so retry=3 type=
800 password sufficient /lib/security/pam_unix.so nullok use_authtok md5 shadow
801 password required /lib/security/pam_deny.so
803 session sufficient /lib/security/pam_afs.so set_token
804 session required /lib/security/pam_limits.so
805 session required /lib/security/pam_unix.so
807 # reafslog is to unlock dtlogin's screensaver
808 other auth sufficient /usr/athena/lib/pam_krb4.so reafslog
810 ### <a name="3.35 Setting up AFS key in KDC a"></a> 3.35 Setting up AFS key in KDC and [[KeyFile]]
812 The easiest method is not much recommended, as the password is possibly very weak:
814 dattan# bos addkey server -kvno <n+1>
818 dattan# kstring2key -c <cellname>
821 dattan# kadmin ckey afs
822 <cut-n-paste the ascii output from above>
824 Beware, there is currently a byte order bug in the kadmin tool as of May 2001 in KTH-KRB. If you run kadmin on a little indian machine (PC, Alpha, ...) you must swap the bytes manually. Here is a small example:
826 bg$ kstring2key -c sics.se
828 ascii = \361\334\211\221\221\206\325\334
829 hex = f1dc89919186d5dc
832 bg.admin@SICS.SE's Password:
833 New DES key for afs: \221\211\334\361\334\325\206\221
835 Please note how the bytes are swapped in groups of four.
837 This bug is fixed in an upcoming release.
839 Better approach is to create random key in KDC using "ksrvutil get" (rather then "ksrvutil add" which asks you for the new password), export it into /etc/srvtab ("ksrvutil ext") and from there copy it into /usr/afs/etc/KeyFile using asetkey utility from /afs/transarc.com/public/afs-contrib. After some years, you may wish to regenerate the random afs key using "ksrvutil change" in KDC and exporting it again.
841 There are two nice pages abou this:
843 <http://www.cs.cmu.edu/afs/andrew.cmu.edu/usr/shadow/www/afs/afs-with-kerberos.html> <http://www.contrib.andrew.cmu.edu/~shadow/afs/afs-with-kerberos.html>
845 As someone noted, you might need some ext\_srvtab utility to extract the key from /etc/srvtab, but I don't remeber that I needed it. Then he also suggets to use asetkey utility.
847 Create afs.natur\\.cuni\\.cz@NATUR.CUNI.CZ principal entry in kerberos:
850 principal instance: natur.cuni.cz
851 principal realm: NATUR.CUNI.CZ
853 Import this key from Kerberos (/etc/srvtab) into AFS /usr/afs/etc/KeyFile using asetkey utility, which is I think from /afs/transarc.com/public/afs-contrib
855 ./asetkey add 0 /etc/srvtab <afs.natur.cuni.cz@NATUR.CUNI.CZ>
857 This [[KeyFile]] with the AFS-key you can just always re-copy to new AFS **server** machines. Be sure that the key version number KVNO is always same in this [[KeyFile]] and in Kerberos database. On all these machines you of course need afs.hostname.REALM key loaded into their /etc/srvtab (create them with 'ksrvutil get'). It seems klog(1) needs afs@REALM, so copy the principal afs.cell.name@REALM to it.
859 You can test if you have same keys in kerberos and AFS like this:
864 If you have some tokens now, then it works and you can now shutdown kaserver. Users, which you have created in AFS under kaserver are in /usr/afs/db/kaserver.\*, but you can just forget them. Create these users again in Kerberos IV.
866 AFS users are then looked up in:
868 kerberos database (/var/kerberos/principal.db)
870 /usr/afs/etc/UserList (permission to manipulate 'bos')
872 system:administrators (permissions for vos, pts, fs, i.e. 'pts adduser' etc)
874 ---------------------------------------------------------------------------------
875 Another approach, untested:
877 http://www.natur.cuni.cz/~majordomo/krb4/krb4.9703/msg00002.html
879 Date: Tue, 9 May 2000 10:57:23 +0200 (MET DST)
880 From: Johan Hedin <johanh at fusion.kth.se>
881 To: Erland Fristedt <Erland.Fristedt@wcs.eraj.ericsson.se>
883 Subject: Re: AFS+KTH-KRB problem
885 This is a printout how we got it to work. Hope this helps.
889 callisto#/usr/athena/sbin/ksrvutil -p johanh.admin -f srvtab get
891 Instance [callisto]: fusion.kth.se
892 Realm [FUSION.KTH.SE]:
893 Is this correct? (y,n) [y]
894 Add more keys? (y,n) [n]
895 Password for johanh.admin@FUSION.KTH.SE:
896 Warning: Are you sure `fusion.kth.se' should not be `fusion'?
897 Added afs.fusion.kth.se@FUSION.KTH.SE
898 Old keyfile in srvtab.old.
899 callisto#/usr/athena/sbin/ksrvutil -p johanh.admin -f srvtab list
901 4 afs.fusion.kth.se@FUSION.KTH.SE
902 callisto#/tmp/asetkey add 4 srvtab afs.fusion.kth.se@FUSION.KTH.SE
904 callisto#bin/bos status callisto
905 Instance buserver, currently running normally.
906 Instance ptserver, currently running normally.
907 Instance vlserver, currently running normally.
908 Instance fs, currently running normally.
909 Auxiliary status is: file server running.
910 callisto#bin/fs la /afs
911 Access list for /afs is
914 system:administrators rlidwka
916 --------------------------------------------------------------------------------
917 > Tokens held by the Cache Manager:
919 > User's (AFS ID 6020) tokens for afs@sunrise.ericsson.se [Expires May 5
923 You got your tickets alright, but then
925 > > touch /afs/.sunrise.ericsson.se/tabort
926 > afs: Tokens for user of AFS id 6020 for cell sunrise.ericsson.se are
927 > discarded (rxkad error=19270407)
929 grep 19270407 /usr/afsws/include/rx/*
930 /usr/afsws/include/rx/rxkad.h:#define RXKADBADTICKET (19270407L)
932 so I would guess that the key version number and/or the key on your
933 AFS servers does not match the key of the afs principal.
935 Use klist -v to figure out about key version numbers and then use
937 $ kstring2key -c sunrise.ericsson.se
939 ascii = \242\345\345\260\323p\263\233
940 hex = a2e5e5b0d370b39b
942 or some other means to ensure that you use the same keys.
944 ### <a name="3.36 Obtaining and getting asetk"></a> 3.36 Obtaining and getting asetkey compiled
946 Better approach is to create random key in KDC, export it into /etc/srvtab and from there move in /usr/afs/etc/KeyFile using asetkey utility from /afs/transarc.com/public/afs-contrib
948 | I can not get asetkey to compile.
950 | asetkey.c: In function `main':
951 | asetkey.c:25: `AFSCONF_SERVERNAME' undeclared (first use in this function)
952 | asetkey.c:25: (Each undeclared identifier is reported only once
953 | asetkey.c:25: for each function it appears in.)
956 AFS 3.5 got rid of a few commonly-used AFS defines; I suspect they are now API calls of some kind, akin to the POSIX move from hardcoded constants to use of \{,f\}pathconf() and sysconf(). I have no idea what those calls are, though.
958 In the meantime, the following two defines are useful in building stuff on AFS 3.5:
960 #define AFSCONF_CLIENTNAME "/usr/vice/etc"
961 #define AFSCONF_SERVERNAME "/usr/afs/etc"
963 ### <a name="3.37 afs_krb_get_lrealm() using"></a><a name="3.37 afs_krb_get_lrealm() using "></a> 3.37 afs\_krb\_get\_lrealm() using /usr/afs/etc/krb.conf
965 In this file you can set also another REALM to be used by you afs server processes, if the REALM should differ from the system-wide REALM (
971 Don't forget it's related to these entries in Kerberos KDC:
974 krbtgt CELL.NAME@REALM
976 If you use heimdal (or MIT krb5), do:
978 echo "REALM" > /usr/afs/etc/krb.conf
980 ### <a name="3.38 Moving from kaserver to Hei"></a> 3.38 Moving from kaserver to Heimdal KDC
982 > While converting all our administration tools, we have discovered that
983 > the time a principal changed his/her/its password is _not_ carried over
984 > from the kaserver DB.
986 First of all, some Heimdal's configure flags:
990 requires krb4 libs, so for that you'll need a working krb4 are you still using a kaserver/kaserver emulation ?
994 is just for dumping a kaserver krb4 database. If you are no longer running a kaserver, you don't need it.
998 <https://lists.openafs.org/pipermail/openafs-info/2002-May/004326.html>
1000 This works while migrating from kaserver:
1002 /usr/heimdal/libexec/hprop --source=kaserver --cell=xxx
1003 --kaspecials --stdout | /usr/heimdal/libexec/hpropd --no-inetd --stdin
1005 This somewhat doesn't:
1007 /usr/heimdal/libexec/hprop --source=kaserver --cell=xxx
1008 --encrypt --master-key=<path to key> --kaspecials --stdout |
1009 /usr/heimdal/libexec/hpropd --stdin
1011 ### <a name="3.39 Moving from KTH-KRB4 to Hei"></a> 3.39 Moving from KTH-KRB4 to Heimdal KDC
1013 /usr/heimdal/libexec/hprop -n -k /etc/krb5.keytab --source=krb4-dump -d /var/kerberos/dump.txt --master-key=/.k -D | /usr/heimdal/libexec/hpropd -n
1017 1. dump of the krb4 database with kdb_util
1018 2. dump of the "default" heimdal database with kadmin -l
1019 3. /usr/heimdal/libexec/hprop -n -k /etc/krb5.keytab --source=krb4-dump -d /usr/heimdal/libexec/hprop -n -k /etc/krb5.keytab --source=krb4-dump -d
1020 where /etc/krb5.keytab contains hprop/`hostname` keys
1021 4. merge of the converted database with file from (2) via kadmin
1023 The special thing for me is the use of "-D" in the (3) which seems to
1024 cause conversion des-cbc-sha1 keys of old krb4 database entries to
1027 ### <a name="3.40 What are those bos(1) -type"></a> 3.40 What are those bos(1) -type values simple and cron?
1029 Typically, admins do this once they configure new afs server:
1031 bos create foo ptserver simple /usr/afs/bin/ptserver -cell bar.baz
1032 bos create foo vlserver simple /usr/afs/bin/vlserver -cell bar.baz
1033 bos create foo fs fs /usr/afs/bin/fileserver /usr/afs/bin/volserver /usr/afs/bin/salvager -cell bar.baz
1035 Type "simple" has one process. type "cron" gets forked at the appropriate time.
1037 ### <a name="3.41 KDC listens on port 88 inst"></a> 3.41 KDC listens on port 88 instead of 750
1039 "Kramer, Matthew" <mattkr@bu.edu> writes:
1042 > Our Kerberos 4 environment listens on only port 750 and doesn't
1043 > listen on port 88. For Win2K/XP machines this causes a problem in
1044 > C:\openafs-1.2.8\src\kauth\user_nt.c line 144 when the Kerberos port is
1045 > queried from the %systemroot%\system32\drivers\etc\services file. Win2K
1046 > and XP both return 88 which is correct for Kerberos 5 but in our case
1047 > not for Kerberos 4. Why doesn't it instead query for kerberos-iv which
1048 > would return the correct value of 750?
1050 > Y:\src\kauth>diff user_nt.c.orig user_nt.c
1052 > < sp = getservbyname("kerberos", "udp");
1054 > > sp = getservbyname("kerberos-iv", "udp");
1056 A quick work around could be to use Loves requestforwarder found at
1058 ftp://ftp.stacken.kth.se/pub/projects/krb-forward/krb-forward-0.1.tar.gz
1062 ### <a name="3.42 afsd gives me "Error -1 in"></a><a name="3.42 afsd gives me "Error -1 in "></a> 3.42 afsd gives me "Error -1 in basic initialization." on startup
1064 When starting afsd, I get the following:
1066 # /usr/vice/etc/afsd -nosettime -debug
1067 afsd: My home cell is 'foo.bar.baz'
1068 ParseCacheInfoFile: Opening cache info file '/usr/vice/etc/cacheinfo'...
1069 ParseCacheInfoFile: Cache info file successfully parsed:
1070 cacheMountDir: '/afs'
1071 cacheBaseDir: '/usr/vice/cache'
1073 afsd: 5000 inode_for_V entries at 0x8075078, 20000 bytes
1074 SScall(137, 28, 17)=-1 afsd: Forking rx listener daemon.
1075 afsd: Forking rx callback listener.
1076 afsd: Forking rxevent daemon.
1077 SScall(137, 28, 48)=-1 SScall(137, 28, 0)=-1 SScall(137, 28, 36)=-1 afsd: Error -1 in basic initialization.
1079 Solution: make sure you have kernel module loaded.
1081 ### <a name="3.43 Although I get krb tickets,"></a> 3.43 Although I get krb tickets, afslog doesn't give me tokens, I see UDP packets to port 4444
1083 Using tcpdump I see the following traffic. What runs on the port 4444?
1085 15:16:54.815194 IP foo.bar.baz.32772 > foo.bar.baz.4444: UDP, length: 269
1086 15:16:54.815199 IP foo.bar.baz > foo.bar.baz: icmp 305: foo.bar.baz udp port 4444 unreachable
1088 This is the 5->4 ticket conversion service on UDP port 4444. Assuming your afs servers know how to deal with krb5 tickets (since openafs-1.2.10? and 1.3.6x?) include the following in /etc/krb5.conf:
1093 ### <a name="3.44 I get error message trhough"></a> 3.44 I get error message trhough syslogd: "afs: Tokens for user of AFS id 0 for cell foo.bar.baz are discarded (rxkad error=19270407)"
1097 grep 19270407 /usr/afsws/include/rx/*
1098 /usr/afsws/include/rx/rxkad.h:#define RXKADBADTICKET (19270407L)
1100 Note that a common cause of this problem is the use of periods (".") in kerberos principals. If you have a kerberos principal such as my.name@REALM.COM and create the corresponding pts userid "my.name" you will get the cryptic error above. If you want to use such principal names and have OpenAFS 1.4.7 or later, you can pass the option -allow-dotted-principals to all server daemons to allow their use. See the -allow-dotted-principals option in the fileserver (or any server daemon) documentation for more information.
1102 ### <a name="3.45 I get tickets and tokens, b"></a> 3.45 I get tickets and tokens, but still get Permission denied.
1104 Answer: /usr/afs/etc/UserList accepts only krb4 syntax. Use `joe.admin` instead of `joe/admin`. See `https://lists.openafs.org/pipermail/openafs-devel/2002-December/008673.html` and the rest of the thread.
1106 ### <a name="3.46 Recovering broken afs cache"></a> 3.46 Recovering broken afs cache on clients
1108 >> Does anyone have a trick to force AFS to refresh its cache (for a
1109 >> particular directory or even for all files?) The only way I know
1110 >> how to accomplish this is to reboot, stop in single user mode,
1111 >> rm -rf the cache files and let AFS rebuild everything.
1113 > fs flush and fs flushv have cured corruption problems in the past
1114 > on some of our clients.
1116 Thanks for the tip - I was not aware of the flush* subcommands.
1117 Here's a little of what I saw today:
1120 /bin/ls: asso.S14Q00246.all.log: Bad address
1121 /bin/ls: asso.S14Q00246.all.lst: Bad address
1122 /bin/ls: chr14markers.txt: Bad address
1123 /bin/ls: geno.summary.txt: Bad address
1124 /bin/ls: global.ind.S14Q00246.all.txt: No such device
1125 /bin/ls: global.S14Q00246.all.txt: No such device
1127 [ other ls results as usual ]
1129 Flushing a particular file had no effect (the same error as shown above appears). Flushvolume took a long time, but when it eventually completed, the ls -la behaved exactly as one would expect.
1131 ### <a name="3.47 What does it mean for a vol"></a> 3.47 What does it mean for a volume to not be in the VLDB?
1133 If a volume is not in the VLDB, you will be unable to perform operations on it using its name; all "vos" operations will need to be done using its numerical id, server, and partition. Furthermore, if a volume is not in the VLDB, it cannot be reached via mountpoints.
1135 ### <a name="3.48 What is a Volume Group?"></a> 3.48 What is a Volume Group?
1137 A volume group is a set of volumes whose volume id numbers differ only in the last three bits. This means that up to eight volumes may belong to a single volume group.
1139 Volumes which share storage on a partition (for example, a volume and its backup, or the r/w and r/o copy of a volume on the same partition) must be part of the same volume group.
1141 ### <a name="3.49 What is a Clone?"></a> 3.49 What is a Clone?
1143 A clone of a volume is a read-only copy of that volume which shares on-disk storage with the original volume. Backup volumes are a particular kind of clone volume. Read-only replicas which reside on the same partition as their read-write volume are another particular kind of clone volume. In some other storage systems this kind of volume is called a "snapshot".
1145 Clone volumes must belong to the same volume group (see previous question) as the volume which they are a clone of.
1147 In addition to backup and readonly clones, you may create up to three additional clones of a volume. To do this, use "vos clone".
1149 When you "vos remove" a volume, its "backup" clone will also be removed automatically. However, clones created with "vos clone" are **not** removed automatically. Unfortunately, these "dangling clones" will no longer be in the VLDB (see question 3.47). They belong to a volume group whose leader (rw volume) no longer exists, which is a somewhat undefined state for AFS. Such volumes should be manually deleted as soon as possible.
1151 ### <a name="3.50 What is a Shadow?"></a> 3.50 What is a Shadow?
1153 A shadow of a volume is a duplicate of that volume which resides on a different partition. Shadow volumes do not share storage with their original volumes (unlike clones). A readonly volume on a **different** partition than its readwrite volume could be considered one particular example of a shadow volume; however, in practice the term "shadow volume" is used to refer to volumes created with "vos shadow" and not to refer to readonly volumes.
1155 A shadow of any readwrite volume may be created using the "vos shadow" command. This will create a new volume which is a shadow of the original volume, and will copy the contents of the old volume to the new volume. This will also set a bit in the header of the new shadow volume that identifies it as a shadow volume. Shadow volumes do not appear in the VLDB (see question 3.47) -- "vos shadow" does not create a VLDB entry and "vos syncvldb" ignores shadow volumes.
1157 You can "refresh" a shadow volume from its original with "vos shadow -incremental". This operation will first check to make sure that the target of the operation is a shadow volume, to prevent the administrator from accidentally corrupting a non-shadow volume. However, if you shadow from a readwrite volume to some shadow of **another** volume, the shadow will be corrupted and will have to be deleted. Vos shadow will only copy data which has changed, so it is very efficient.
1159 You can remove the shadow bit from a volume's header with "vos syncvldb -force". This will remove the shadow bit and create a VLDB entry for the volume, deleting any previous entry for the rw volume. However, the rw volume itself will not be deleted; it will simply exist without a VLDB entry.
1161 Attempting to create shadows of two different rw volumes on the same partition with the same name is prohibited by the volserver. Technically it is possible to create two shadow volumes with the same name on different partitions; however, this is not advisable.
1163 ### <a name="3.51 Can I authenticate to my af"></a> 3.51 Can I authenticate to my afs cell using multiple kerberos Realms?
1165 Yes. This can be usefull if your organization has multiple kerberos Realms with identical user entries: For example you might have an MIT Kerberos realm for Unix-like systems, and an Active Directory domain for windows with synchronized accounts.
1167 As long as you only need to support 2 realms, and one of them has the same name as the afs cell(or the uppercase of the name of the afs cell) you can do this without upgrading to a new version of AFS. If you need more Realms, or if neither Realm name matches your cell name, there is work to support this in the development tree.
1169 In order to make this work, you need to do 4 things.
1171 1) add a key for the afs service to the additional realm and store it in a keytab:
1173 $ kadmin -q ank -e des-cbc-crc:v4 -kvno <new kvno> afs/your.cell.name@YOUR.SECOND.REALM.NAME
1174 $ kadmin -q ktadd -e des-cbc-crc:v4 -k /path/to/afs.keytab afs/your.cell.name@YOUR.SECOND.REALM.NAME
1176 Note that a kvno must be specified for the key that is different than the kvno for your existing key(s) in the original realm. you can check on the kvno of the existing keys by running "asetkey list" on one of your servers. since keys must be in ascending order in the AFS [[KeyFile]] it will be easiest if you make the new kvno higher than any existing key's kvno.
1178 It's also worth noting that the process of adding the key to a keytab(at least with MIT krb5) actually creates a new key first, so your kvno will end up being higher than what you specified when you added the principal. you can check on the current kvno by using the "kadmin -q getprinc afs/your.cell.name@YOUR.SECOND.REALM.NAME" command.
1180 2) add the new key to the afs [[KeyFile]] on your afs servers:
1182 $ asetkey add <kvno> /path/to/afs.keytab afs/your.cell.name@YOUR.SECOND.REALM.NAME
1184 note that the kvno here needs to be the same one as is reported by the kadmin getprinc command.
1186 3) create an afs krb.conf with your additional Realm's name in it, and place it on all of your AFS servers:
1188 echo "YOUR.SECOND.REALM.NAME" > /usr/afs/etc/krb.conf
1190 4) restart you afs servers.
1192 at this point you should be able to run:
1194 kinit you@YOUR.SECOND.REALM.NAME
1197 and recieve the same privileges as if you had run:
1199 kinit you@YOUR.CELL.NAME
1202 ### <a name="3.52 Is it a good idea to store"></a> 3.52 Is it a good idea to store mail in AFS?
1204 Some people have expressed the opinion that this is not a good idea. Assuming that a modern (one-file-per-message) format is being used, the concrete reasons to avoid storing mail in AFS include:
1206 1. AFS is not designed to provide good performance under the sort of concurrent accesses that occur when many mail server machines share a common space in AFS; see [this message](http://www.openafs.org/pipermail/openafs-info/2007-June/026621.html) for more information.
1207 - This does not apply to situations where there is a single mail server for a particular user.
1208 - This also may not apply if [Callback Extended Information](http://michigan-openafs-lists.central.org/archives/afs3-standardization/2008-May/000123.html) is implemented.
1210 ### <a name="3.53 How can I ensure that the"></a><a name="3.53 How can I ensure that the "></a> 3.53 How can I ensure that the userids on client machines match the users' pts ids?
1212 You can use [libnss-afs](http://www.hcoop.net/~megacz/software/libnss-afs.html) for this.
1214 ### <a name="3.54 What is Fast Restart?"></a> 3.54 What is Fast Restart?
1216 When compiled with --enable-fast-restart, the file server will start up immediately, without first salvaging any volumes which cannot be attached.
1218 Disadvantages to Fast Restart, [as noted here](http://lists.openafs.org/pipermail/openafs-info/2008-May/029386.html) include:
1220 1. Volumes in need of salvage remain offline until an administrator intervenes manually
1221 2. On an inode-based fileserver, salvaging a single volume crawls every inode; therefore, salvaging volumes individually (rather than partition-at-a-time) duplicates work.
1223 ### <a name="#3.55 Reboot ?"></a> 3.55 Why does AFS reboot itself spontaneously at 4:00am every Sunday?
1225 Nobody's really sure why this behavior is the default, but you can disable it with
1227 bos setrestart $SERVER_NAME never
1228 bos setrestart $SERVER_NAME -newbinary never
1230 ### <a name="#3.56 weak crypto"></a>3.56 Why do I get an error -1765328370 when authenticating?
1232 -1765328370 KDC has no support for encryption type
1234 In other words, your KDC has support for DES-CBC-CRC turned off.
1235 Re-enable support for DES encryption types and you will get further.
1237 Check /etc/krb5.conf and make sure it has "allow_weak_crypto = true" in the [libdefaults]
1238 section. Also check kdc.conf (possibly located in /var/kerberos/krb5kdc) and make sure
1239 that des-cbc-crc:normal is in the supported_enctypes list.