2 * \addtogroup rxrpc-spec RX RPC Specification
6 * \mainpage AFS-3 Programmer's Reference: Specification for the Rx Remote
7 * Procedure Call Facility
9 * AFS-3 Programmer's Reference:
11 * Specification for the Rx Remote Procedure Call Facility
12 * \author Edward R. Zayas
13 * Transarc Corporation
15 * \date 28 August 1991 10:11 .cCopyright 1991 Transarc Corporation All Rights
18 * \page chap1 Chapter 1 -- Overview of the Rx RPC system
20 * \section sec1-1 Section 1.1: Introduction to Rx
23 * The Rx package provides a high-performance, multi-threaded, and secure
25 * remote procedure calls (RPCs) may be performed between programs executing
27 * network of computers. The Rx protocol is adaptive, conforming itself to
29 * network communication media. It allows user applications to define and
31 * security modules, allowing them to execute the precise end-to-end
32 * authentication algorithms
33 * required to suit their needs and goals. Although pervasive throughout the
35 * file system, all of its agents, and many of its standard application
36 * programs, Rx is entirely
37 * separable from AFS and does not depend on any of its features. In fact, Rx
38 * can be used to build applications engaging in RPC-style communication under
39 * a variety of unix-style file systems. There are in-kernel and user-space
40 * implementations of the Rx facility, with both sharing the same interface.
42 * This document provides a comprehensive and detailed treatment of the Rx RPC
45 * \section sec1-2 Section 1.2: Basic Concepts
48 * The Rx design operates on the set of basic concepts described in this
51 * \subsection sec1-2-1 Section 1.2.1: Security
54 * The Rx architecture provides for tight integration between the RPC mechanism
55 * and methods for making this communication medium secure. As elaborated in
56 * Section 5.3.1.3 and illustrated by the built-in rxkad security system
57 * described in Chapter 3, Rx defines the format for a generic security module,
58 * and then allows application programmers to define and activate
59 * instantiations of these modules. Rx itself knows nothing about the internal
60 * details of any particular security model, or the module-specific state it
61 * requires. It does, however, know when to call the generic security
62 * operations, and so can easily execute the security algorithm defined. Rx
63 * does maintain basic state per connection on behalf of any given security
66 * \subsection sec1-2-2 Section 1.2.2: Services
69 * An Rx-based server exports services, or specific RPC interfaces that
70 * accomplish certain tasks. Services are identified by (host-address,
71 * UDP-port, serviceID) triples. An Rx service is installed and initialized on
72 * a given host through the use of the rx NewService() routine (See Section
73 * 5.6.3). Incoming calls are stamped with the Rx service type, and must match
74 * an installed service to be accepted. Internally, Rx services also carry
75 * string names which identify them, which is useful for remote debugging and
76 * statistics-gathering programs. The use of a service ID allows a single
77 * server process to export multiple, independently-specified Rx RPC services.
79 * Each Rx service contains one or more security classes, as implemented by
80 * individual security objects. These security objects implement end-to-end
81 * security protocols. Individual peer-to-peer connections established on
82 * behalf of an Rx service will select exactly one of the supported security
83 * objects to define the authentication procedures followed by all calls
84 * associated with the connection. Applications are not limited to using only
85 * the core set of built-in security objects offered by Rx. They are free to
86 * define their own security objects in order to execute the specific protocols
89 * It is possible to specify both the minimum and maximum number of lightweight
90 * processes available to handle simultaneous calls directed to an Rx service.
91 * In addition, certain procedures may be registered with the service and
92 * called at specific times in the course of handling an RPC request.
94 * \subsection sec1-2-3 Section 1.2.3: Connections
97 * An Rx connection represents an authenticated communication path, allowing a
98 * sequence of multiple asynchronous conversations (calls). Each connection is
99 * identified by a connection ID. The low-order bits of the connection ID are
100 * reserved so that they may be stamped with the index of a particular call
101 * channel. With up to RX MAXCALLS concurrent calls (set to 4 in this
102 * implementation), the bottom two bits are set aside for this purpose. The
103 * connection ID is not sufficient to uniquely identify an Rx connection by
104 * itself. Should a client crash and restart, it may reuse a connection ID,
105 * causing inconsistent results. Included with the connection ID is the epoch,
106 * or start time for the client side of the connection. After a crash, the next
107 * incarnation of the client will choose a different epoch value. This will
108 * differentiate the new incarnation from the orphaned connection record on the
111 * Each connection is associated with a parent service, which defines a set of
112 * supported security models. At creation time, an Rx connection selects the
113 * particular security protocol it will implement, referencing the associated
114 * service. The connection structure maintains state for each individual call
115 * simultaneously handled.
117 * \subsection sec1-2-4 Section 1.2.4: Peers
120 * For each connection, Rx maintains information describing the entity, or
121 * peer, on the other side of the wire. A peer is identified by a (host,
122 * UDP-port) pair, with an IP address used to identify the host. Included in
123 * the information kept on this remote communication endpoint are such network
124 * parameters as the maximum packet size supported by the host, current
125 * readings on round trip time and retransmission delays, and packet skew (see
126 * Section 1.2.7). There are also congestion control fields, including
127 * retransmission statistics and descriptions of the maximum number of packets
128 * that may be sent to the peer without pausing. Peer structures are shared
129 * between connections whenever possible, and, hence, are reference-counted. A
130 * peer object may be garbage-collected if it is not actively referenced by any
131 * connection structure and a sufficient period of time has lapsed since the
132 * reference count dropped to zero.
134 * \subsection sec1-2-5 Section 1.2.5: Calls
137 * An Rx call represents an individual RPC being executed on a given
138 * connection. As described above, each connection may have up to RX MAXCALLS
139 * calls active at any one instant. The information contained in each call
140 * structure is specific to the given call.
142 * "Permanent" call state, such as the call number, is maintained in the
143 * connection structure itself.
145 * \subsection sec1-2-6 Section 1.2.6: Quotas
148 * Each attached server thread must be able to make progress to avoid system
149 * deadlock. The Rx facility ensures that it can always handle the arrival of
150 * the next unacknowledged data packet for an attached call with its system of
151 * packet quotas. A certain number of packets are reserved per server thread
152 * for this purpose, allowing the server threads to queue up an entire window
153 * full of data for an active call and still have packet buffers left over to
154 * be able to read its input without blocking.
156 * \subsection sec1-2-7 Section 1.2.7: Packet Skew
159 * If a packet is received n packets later than expected (based on packet
160 * serial numbers), then we define it to have a skew of n. The maximum skew
161 * values allow us to decide when a packet hasn't been received yet because it
162 * is out of order, as opposed to when it is likely to have been dropped.
164 * \subsection sec1-2-8 Section 1.2.8: Multicasting
167 * The rx multi.c module provides for multicast abilities, sending an RPC to
168 * several targets simultaneously. While true multicasting is not achieved, it
169 * is simulated by a rapid succession of packet transmissions and a collection
170 * algorithm for the replies. A client program, though, may be programmed as if
171 * multicasting were truly taking place. Thus, Rx is poised to take full
172 * advantage of a system supporting true multicasting with minimal disruption
173 * to the existing client code base.
175 * \section sec1-3 Section 1.3: Scope
178 * This paper is a member of a documentation suite providing specifications as
179 * to the operation and interfaces offered by the various AFS servers and
180 * agents. Rx is an integral part of the AFS environment, as it provides the
181 * high-performance, secure pathway by which these system components
182 * communicate across the network. Although AFS is dependent on Rx's services,
183 * the reverse is not true. Rx is a fully independent RPC package, standing on
184 * its own and usable in other environments.
186 * The intent of this work is to provide readers with a sufficiently detailed
187 * description of Rx that they may proceed to write their own applications on
188 * top of it. In fact, code for a sample Rx server and client are provided.
190 * One topic related to Rx will not be covered by this document, namely the
191 * Rxgen stub generator. Rather, rxgen is addressed in a separate document.
193 * \section sec1-4 Section 1.4: Document Layout
196 * After this introduction, Chapter 2 will introduce and describe various
197 * facilities and tools that support Rx. In particular, the threading and
198 * locking packages used by Rx will be examined, along with a set of timer and
199 * preemption tools. Chapter 3 proceeds to examine the details of one of the
200 * built-in security modules offered by Rx. Based on the Kerberos system
201 * developed by MIT's Project Athena, this rxkad module allows secure, ecrypted
202 * communication between the server and client ends of the RPC. Chapter 5 then
203 * provides the full Rx programming interface, and Chapter 6 illustrates the
204 * use of this programming interface by providing a fully-operational
205 * programming example employing Rx. This rxdemo suite is examined in detail,
206 * ranging all the way from a step-by-step analysis of the human-authored
207 * files, and the Rxgen-generated files upon which they are based, to the
208 * workings of the associated Makefile. Output from the example rxdemo server
209 * and client is also provided.
211 * \section sec1-5 Section 1.5: Related Documents
214 * Titles for the full suite of AFS specification documents are listed below.
215 * All of the servers and agents making up the AFS computing environment,
216 * whether running in the unix kernel or in user space, utilize an Rx RPC
217 * interface through which they export their services.
219 * \li AFS-3 Programmer's Reference: Architectural Overview: This paper
220 * provides an architectual overview of the AFS distributed file system,
221 * describing the full set of servers and agents in a coherent way,
222 * illustrating their relationships to each other and examining their
224 * \li AFS-3 Programmer's Reference: file Server/Cache Manager Interface: This
225 * document describes the workings and interfaces of the two primary AFS
226 * agents, the file Server and Cache Manager. The file Server provides a
227 * centralized disk repository for sets of files, regulating access to them.
228 * End users sitting on client machines rely on the Cache Manager agent,
229 * running in their kernel, to act as their agent in accessing the data stored
230 * on file Server machines, making those files appear as if they were really
232 * \li AFS-3 Programmer's Reference:Volume Server/Volume Location Server
233 * Interface: This document describes the services through which "containers"
234 * of related user data are located and managed.
235 * \li AFS-3 Programmer's Reference: Protection Server Interface: This paper
236 * describes the server responsible for mapping printable user names to and
237 * from their internal AFS identifiers. The Protection Server also allows users
238 * to create, destroy, and manipulate "groups" of users, which are suitable for
239 * placement on access control lists (ACLs).
240 * \li AFS-3 Programmer's Reference: BOS Server Interface: This paper
241 * explicates the "nanny" service which assists in the administrability of the
244 * In addition to these papers, the AFS 3.1 product is delivered with its own
245 * user, system administrator, installation, and command reference documents.
247 * \page chap2 Chapter 2 -- The LWP Lightweight Process Package
249 * \section sec2-1 Section 2.1: Introduction
251 * This chapter describes a package allowing multiple threads of control to
252 * coexist and cooperate within one unix process. Each such thread of control
253 * is also referred to as a lightweight process, in contrast to the traditional
254 * unix (heavyweight) process. Except for the limitations of a fixed stack size
255 * and non-preemptive scheduling, these lightweight processes possess all the
256 * properties usually associated with full-fledged processes in typical
257 * operating systems. For the purposes of this document, the terms lightweight
258 * process, LWP, and thread are completely interchangeable, and they appear
259 * intermixed in this chapter. Included in this lightweight process facility
260 * are various sub-packages, including services for locking, I/O control,
261 * timers, fast time determination, and preemption.
263 * The Rx facility is not the only client of the LWP package. Other LWP clients
264 * within AFS include the file Server, Protection Server, BOS Server, Volume
265 * Server, Volume Location Server, and the Authentication Server, along with
266 * many of the AFS application programs.
268 * \section sec2-2 Section 2.2: Description
270 * \subsection Section 2.2.1: sec2-2-1 LWP Overview
273 * The LWP package implements primitive functions that provide the basic
274 * facilities required to enable procedures written in C to execute
275 * concurrently and asynchronously. The LWP package is meant to be
276 * general-purpose (note the applications mentioned above), with a heavy
277 * emphasis on simplicity. Interprocess communication facilities can be built
278 * on top of this basic mechanism and in fact, many different IPC mechanisms
279 * could be implemented.
281 * In order to set up the threading support environment, a one-time invocation
282 * of the LWP InitializeProcessSupport() function must precede the use of the
283 * facilities described here. This initialization function carves an initial
284 * process out of the currently executing C procedure and returns its thread
285 * ID. For symmetry, an LWP TerminateProcessSupport() function may be used
286 * explicitly to release any storage allocated by its counterpart. If this
287 * function is used, it must be issued from the thread created by the original
288 * LWP InitializeProcessSupport() invocation.
290 * When any of the lightweight process functions completes, an integer value is
291 * returned to indicate whether an error condition was encountered. By
292 * convention, a return value of zero indicates that the operation succeeded.
294 * Macros, typedefs, and manifest constants for error codes needed by the
295 * threading mechanism are exported by the lwp.h include file. A lightweight
296 * process is identified by an object of type PROCESS, which is defined in the
299 * The process model supported by the LWP operations is based on a
300 * non-preemptive priority dispatching scheme. A priority is an integer in the
301 * range [0..LWP MAX PRIORITY], where 0 is the lowest priority. Once a given
302 * thread is selected and dispatched, it remains in control until it
303 * voluntarily relinquishes its claim on the CPU. Control may be relinquished
304 * by either explicit means (LWP_DispatchProcess()) or implicit means (through
305 * the use of certain other LWP operations with this side effect). In general,
306 * all LWP operations that may cause a higher-priority process to become ready
307 * for dispatching preempt the process requesting the service. When this
308 * occurs, the dispatcher mechanism takes over and automatically schedules the
309 * highest-priority runnable process. Routines in this category, where the
310 * scheduler is guaranteed to be invoked in the absence of errors, are:
311 * \li LWP_WaitProcess()
312 * \li LWP_MwaitProcess()
313 * \li LWP_SignalProcess()
314 * \li LWP_DispatchProcess()
315 * \li LWP_DestroyProcess()
317 * The following functions are guaranteed not to cause preemption, and so may
318 * be issued with no fear of losing control to another thread:
319 * \li LWP_InitializeProcessSupport()
320 * \li LWP_NoYieldSignal()
321 * \li LWP_CurrentProcess()
322 * \li LWP_ActiveProcess()
323 * \li LWP_StackUsed()
327 * The symbol LWP NORMAL PRIORITY, whose value is (LWP MAX PRIORITY-2),
328 * provides a reasonable default value to use for process priorities.
330 * The lwp debug global variable can be set to activate or deactivate debugging
331 * messages tracing the flow of control within the LWP routines. To activate
332 * debugging messages, set lwp debug to a non-zero value. To deactivate, reset
333 * it to zero. All debugging output from the LWP routines is sent to stdout.
335 * The LWP package checks for stack overflows at each context switch. The
336 * variable that controls the action of the package when an overflow occurs is
337 * lwp overflowAction. If it is set to LWP SOMESSAGE, then a message will be
338 * printed on stderr announcing the overflow. If lwp overflowAction is set to
339 * LWP SOABORT, the abort() LWP routine will be called. finally, if lwp
340 * overflowAction is set to LWP SOQUIET, the LWP facility will ignore the
341 * errors. By default, the LWP SOABORT setting is used.
343 * Here is a sketch of a simple program (using some psuedocode) demonstrating
344 * the high-level use of the LWP facility. The opening #include line brings in
345 * the exported LWP definitions. Following this, a routine is defined to wait
346 * on a "queue" object until something is deposited in it, calling the
347 * scheduler as soon as something arrives. Please note that various LWP
348 * routines are introduced here. Their definitions will appear later, in
352 * #include <afs/lwp.h>
353 * static read_process(id)
355 * { /* Just relinquish control for now */
356 * LWP_DispatchProcess();
359 * /* Wait until there is something in the queue */
360 * while (empty(q)) LWP_WaitProcess(q);
361 * /* Process the newly-arrived queue entry */
362 * LWP_DispatchProcess();
368 * The next routine, write process(), sits in a loop, putting messages on the
369 * shared queue and signalling the reader, which is waiting for activity on the
370 * queue. Signalling a thread is accomplished via the LWP SignalProcess()
374 * static write_process()
376 * /* Loop, writing data to the shared queue. */
377 * for (mesg = messages; *mesg != 0; mesg++)
380 * LWP_SignalProcess(q);
386 * finally, here is the main routine for this demo pseudocode. It starts by
387 * calling the LWP initialization routine. Next, it creates some number of
388 * reader threads with calls to LWP CreateProcess() in addition to the single
389 * writer thread. When all threads terminate, they will signal the main routine
390 * on the done variable. Once signalled, the main routine will reap all the
391 * threads with the help of the LWP DestroyProcess() function.
398 * PROCESS *id; /* Initial thread ID */
399 * /* Set up the LWP package, create the initial thread ID. */
400 * LWP_InitializeProcessSupport(0, &id);
401 * /* Create a set of reader threads. */
402 * for (i = 0; i < nreaders; i++)
403 * LWP_CreateProcess(read_process, STACK_SIZE, 0, i, "Reader",
406 * /* Create a single writer thread. */
407 * LWP_CreateProcess(write_process, STACK_SIZE, 1, 0, "Writer", &writer);
408 * /* Wait for all the above threads to terminate. */
409 * for (i = 0; i <= nreaders; i++)
410 * LWP_WaitProcess(&done);
412 * /* All threads are done. Destroy them all. */
413 * for (i = nreaders-1; i >= 0; i--)
414 * LWP_DestroyProcess(readers[i]);
418 * \subsection sec2-2-2 Section 2.2.2: Locking
420 * The LWP locking facility exports a number of routines and macros that allow
421 * a C programmer using LWP threading to place read and write locks on shared
422 * data structures. This locking facility was also written with simplicity in
425 * In order to invoke the locking mechanism, an object of type struct Lock must
426 * be associated with the object. After being initialized with a call to
427 * LockInit(), the lock object is used in invocations of various macros,
428 * including ObtainReadLock(), ObtainWriteLock(), ReleaseReadLock(),
429 * ReleaseWriteLock(), ObtainSharedLock(), ReleaseSharedLock(), and
432 * Lock semantics specify that any number of readers may hold a lock in the
433 * absence of a writer. Only a single writer may acquire a lock at any given
434 * time. The lock package guarantees fairness, legislating that each reader and
435 * writer will eventually obtain a given lock. However, this fairness is only
436 * guaranteed if the priorities of the competing processes are identical. Note
437 * that ordering is not guaranteed by this package.
439 * Shared locks are read locks that can be "boosted" into write locks. These
440 * shared locks have an unusual locking matrix. Unboosted shared locks are
441 * compatible with read locks, yet incompatible with write locks and other
442 * shared locks. In essence, a thread holding a shared lock on an object has
443 * effectively read-locked it, and has the option to promote it to a write lock
444 * without allowing any other writer to enter the critical region during the
445 * boost operation itself.
447 * It is illegal for a process to request a particular lock more than once
448 * without first releasing it. Failure to obey this restriction will cause
449 * deadlock. This restriction is not enforced by the LWP code.
451 * Here is a simple pseudocode fragment serving as an example of the available
452 * locking operations. It defines a struct Vnode object, which contains a lock
453 * object. The get vnode() routine will look up a struct Vnode object by name,
454 * and then either read-lock or write-lock it.
456 * As with the high-level LWP example above, the locking routines introduced
457 * here will be fully defined later, in Section 2.3.2.
460 * #include <afs/lock.h>
464 * struct Lock lock; Used to lock this vnode
470 * struct Vnode *get_vnode(name, how) char *name;
476 * ObtainReadLock(&v->lock);
478 * ObtainWriteLock(&v->lock);
483 * \subsection sec2-2-3 Section 2.2.3: IOMGR
486 * The IOMGR facility associated with the LWP service allows threads to wait on
487 * various unix events. The exported IOMGR Select() routine allows a thread to
488 * wait on the same set of events as the unix select() call. The parameters to
489 * these two routines are identical. IOMGR Select() puts the calling LWP to
490 * sleep until no threads are active. At this point, the built-in IOMGR thread,
491 * which runs at the lowest priority, wakes up and coalesces all of the select
492 * requests together. It then performs a single select() and wakes up all
493 * threads affected by the result.
495 * The IOMGR Signal() routine allows an LWP to wait on the delivery of a unix
496 * signal. The IOMGR thread installs a signal handler to catch all deliveries
497 * of the unix signal. This signal handler posts information about the signal
498 * delivery to a global data structure. The next time that the IOMGR thread
499 * runs, it delivers the signal to any waiting LWP.
501 * Here is a pseudocode example of the use of the IOMGR facility, providing the
502 * blueprint for an implemention a thread-level socket listener.
505 * void rpc_SocketListener()
507 * int ReadfdMask, WritefdMask, ExceptfdMask, rc;
508 * struct timeval *tvp;
511 * ExceptfdMask = ReadfdMask = (1 << rpc_RequestSocket);
514 * rc = IOMGR_Select(8*sizeof(int), &ReadfdMask, &WritefdMask,
515 * &ExceptfdMask, tvp);
519 * case 0: /* Timeout */ continue;
520 * /* Main while loop */
522 * case -1: /* Error */
523 * SystemError("IOMGR_Select");
526 * case 1: /* RPC packet arrived! */ ...
530 * default: Should never occur
536 * \subsection sec2-2-4 Section 2.2.4: Timer
538 * The timer package exports a number of routines that assist in manipulating
539 * lists of objects of type struct TM Elem. These struct TM Elem timers are
540 * assigned a timeout value by the user and inserted in a package-maintained
541 * list. The time remaining to each timer's timeout is kept up to date by the
542 * package under user control. There are routines to remove a timer from its
543 * list, to return an expired timer from a list, and to return the next timer
546 * A timer is commonly used by inserting a field of type struct TM Elem into a
547 * structure. After setting the desired timeout value, the structure is
548 * inserted into a list by means of its timer field.
550 * Here is a simple pseudocode example of how the timer package may be used.
551 * After calling the package initialization function, TM Init(), the pseudocode
552 * spins in a loop. first, it updates all the timers via TM Rescan() calls.
553 * Then, it pulls out the first expired timer object with TM GetExpired() (if
554 * any), and processes it.
557 * static struct TM_Elem *requests;
559 * TM_Init(&requests); /* Initialize timer list */ ...
561 * TM_Rescan(requests); /* Update the timers */
562 * expired = TM_GetExpired(requests);
565 * . . . process expired element . . .
569 * \subsection sec2-2-5 Section 2.2.5: Fast Time
572 * The fast time routines allows a caller to determine the current time of day
573 * without incurring the expense of a kernel call. It works by mapping the page
574 * of the kernel that holds the time-of-day variable and examining it directly.
575 * Currently, this package only works on Suns. The routines may be called on
576 * other architectures, but they will run more slowly.
578 * The initialization routine for this package is fairly expensive, since it
579 * does a lookup of a kernel symbol via nlist(). If the client application
580 * program only runs for only a short time, it may wish to call FT Init() with
581 * the notReally parameter set to TRUE in order to prevent the lookup from
582 * taking place. This is useful if you are using another package that uses the
583 * fast time facility.
585 * \section sec2-3 Section 2.3: Interface Specifications
587 * \subsection sec2-3-1 Section 2.3.1: LWP
590 * This section covers the calling interfaces to the LWP package. Please note
591 * that LWP macros (e.g., ActiveProcess) are also included here, rather than
592 * being relegated to a different section.
594 * \subsubsection sec2-3-1-1 Section 2.3.1.1: LWP_InitializeProcessSupport
595 * _ Initialize the LWP package
598 * int LWP_InitializeProcessSupport(IN int priority; OUT PROCESS *pid)
600 * This function initializes the LWP package. In addition, it turns the current
601 * thread of control into the initial process with the specified priority. The
602 * process ID of this initial thread is returned in the pid parameter. This
603 * routine must be called before any other routine in the LWP library. The
604 * scheduler will NOT be invoked as a result of calling
605 * LWP_InitializeProcessSupport().
607 * LWP EBADPRI The given priority is invalid, either negative or too large.
609 * \subsubsection sec2-3-1-2 Section 2.3.1.2: LWP_TerminateProcessSupport
610 * _ End process support, perform cleanup
613 * int LWP_TerminateProcessSupport()
615 * This routine terminates the LWP threading support and cleans up after it by
616 * freeing any auxiliary storage used. This routine must be called from within
617 * the process that invoked LWP InitializeProcessSupport(). After LWP
618 * TerminateProcessSupport() has been called, it is acceptable to call LWP
619 * InitializeProcessSupport() again in order to restart LWP process support.
621 * ---Always succeeds, or performs an abort().
623 * \subsubsection sec2-3-1-3 Section 2.3.1.3: LWP_CreateProcess _ Create a
627 * int LWP_CreateProcess(IN int (*ep)(); IN int stacksize; IN int priority; IN
628 * char *parm; IN char *name; OUT PROCESS *pid)
630 * This function is used to create a new lightweight process with a given
631 * printable name. The ep argument identifies the function to be used as the
632 * body of the thread. The argument to be passed to this function is contained
633 * in parm. The new thread's stack size in bytes is specified in stacksize, and
634 * its execution priority in priority. The pid parameter is used to return the
635 * process ID of the new thread.
637 * If the thread is successfully created, it will be marked as runnable. The
638 * scheduler is called before the LWP CreateProcess() call completes, so the
639 * new thread may indeed begin its execution before the completion. Note that
640 * the new thread is guaranteed NOT to run before the call completes if the
641 * specified priority is lower than the caller's. On the other hand, if the new
642 * thread's priority is higher than the caller's, then it is guaranteed to run
643 * before the creation call completes.
645 * LWP EBADPRI The given priority is invalid, either negative or too large.
646 * \n LWP NOMEM Could not allocate memory to satisfy the creation request.
648 * \subsubsection sec2-3-1-4 Section: 2.3.1.4: LWP_DestroyProcess _ Create
652 * int LWP_DestroyProcess(IN PROCESS pid)
654 * This routine destroys the thread identified by pid. It will be terminated
655 * immediately, and its internal storage will be reclaimed. A thread is allowed
656 * to destroy itself. In this case, of course, it will only get to see the
657 * return code if the operation fails. Note that a thread may also destroy
658 * itself by returning from the parent C routine.
660 * The scheduler is called by this operation, which may cause an arbitrary
661 * number of threads to execute before the caller regains the processor.
663 * LWP EINIT The LWP package has not been initialized.
665 * \subsubsection sec2-3-1-5 Section 2.3.1.5: WaitProcess _ Wait on an
669 * int LWP WaitProcess(IN char *event)
671 * This routine puts the thread making the call to sleep until another LWP
672 * calls the LWP SignalProcess() or LWP NoYieldSignal() routine with the
673 * specified event. Note that signalled events are not queued. If a signal
674 * occurs and no thread is awakened, the signal is lost. The scheduler is
675 * invoked by the LWP WaitProcess() routine.
677 * LWP EINIT The LWP package has not been initialized.
678 * \n LWP EBADEVENT The given event pointer is null.
680 * \subsubsection sec2-3-1-6 Section 2.3.1.6: MwaitProcess _ Wait on a set
684 * int LWP MwaitProcess(IN int wcount; IN char *evlist[])
686 * This function allows a thread to wait for wcount signals on any of the items
687 * in the given evlist. Any number of signals of a particular event are only
688 * counted once. The evlist is a null-terminated list of events to wait for.
689 * The scheduler will be invoked.
691 * LWP EINIT The LWP package has not been initialized.
692 * \n LWP EBADCOUNT An illegal number of events has been supplied.
694 * \subsubsection sec2-3-1-7 Section 2.3.1.7: SignalProcess _ Signal an
698 * int LWP SignalProcess(IN char *event)
700 * This routine causes the given event to be signalled. All threads waiting for
701 * this event (exclusively) will be marked as runnable, and the scheduler will
702 * be invoked. Note that threads waiting on multiple events via LWP
703 * MwaitProcess() may not be marked as runnable. Signals are not queued.
704 * Therefore, if no thread is waiting for the signalled event, the signal will
707 * LWP EINIT The LWP package has not been initialized. LWP EBADEVENT A null
708 * event pointer has been provided. LWP ENOWAIT No thread was waiting on the
711 * \subsubsection sec2-3-1-8 Section 2.3.1.8: NoYieldSignal _ Signal an
712 * event without invoking scheduler
715 * int LWP NoYieldSignal(IN char *event)
717 * This function is identical to LWP SignalProcess() except that the scheduler
718 * will not be invoked. Thus, control will remain with the signalling process.
720 * LWP EINIT The LWP package has not been initialized. LWP EBADEVENT A null
721 * event pointer has been provided. LWP ENOWAIT No thread was waiting on the
724 * \subsubsection sec2-3-1-9 Section 2.3.1.9: DispatchProcess _ Yield
725 * control to the scheduler
728 * int LWP DispatchProcess()
730 * This routine causes the calling thread to yield voluntarily to the LWP
731 * scheduler. If no other thread of appropriate priority is marked as runnable,
732 * the caller will continue its execution.
734 * LWP EINIT The LWP package has not been initialized.
736 * \subsubsection sec2-3-1-10 Section 2.3.1.10: CurrentProcess _ Get the
737 * current thread's ID
740 * int LWP CurrentProcess(IN PROCESS *pid)
742 * This call places the current lightweight process ID in the pid parameter.
744 * LWP EINIT The LWP package has not been initialized.
746 * \subsubsection sec2-3-1-11 Section 2.3.1.11: ActiveProcess _ Get the
747 * current thread's ID (macro)
750 * int LWP ActiveProcess()
752 * This macro's value is the current lightweight process ID. It generates a
753 * value identical to that acquired by calling the LWP CurrentProcess()
754 * function described above if the LWP package has been initialized. If no such
755 * initialization has been done, it will return a value of zero.
757 * \subsubsection sec2-3-1-12 Section: 2.3.1.12: StackUsed _ Calculate
761 * int LWP StackUsed(IN PROCESS pid; OUT int *max; OUT int *used)
763 * This function returns the amount of stack space allocated to the thread
764 * whose identifier is pid, and the amount actually used so far. This is
765 * possible if the global variable lwp stackUseEnabled was TRUE when the thread
766 * was created (it is set this way by default). If so, the thread's stack area
767 * was initialized with a special pattern. The memory still stamped with this
768 * pattern can be determined, and thus the amount of stack used can be
769 * calculated. The max parameter is always set to the thread's stack allocation
770 * value, and used is set to the computed stack usage if lwp stackUseEnabled
771 * was set when the process was created, or else zero.
773 * LWP NO STACK Stack usage was not enabled at thread creation time.
775 * \subsubsection sec2-3-1-13 Section 2.3.1.13: NewRock _ Establish
776 * thread-specific storage
779 * int LWP NewRock (IN int tag; IN char **value)
781 * This function establishes a "rock", or thread-specific information,
782 * associating it with the calling LWP. The tag is intended to be any unique
783 * integer value, and the value is a pointer to a character array containing
786 * Users of the LWP package must coordinate their choice of tag values. Note
787 * that a tag's value cannot be changed. Thus, to obtain a mutable data
788 * structure, another level of indirection is required. Up to MAXROCKS (4)
789 * rocks may be associated with any given thread.
791 * ENOROCKS A rock with the given tag field already exists. All of the MAXROCKS
795 * \subsubsection sec2-3-1-14 Section: 2.3.1.14: GetRock _ Retrieve
796 * thread-specific storage
799 * int LWP GetRock(IN int tag; OUT **value)
801 * This routine recovers the thread-specific information associated with the
802 * calling process and the given tag, if any. Such a rock had to be established
803 * through a LWP NewRock() call. The rock's value is deposited into value.
805 * LWP EBADROCK A rock has not been associated with the given tag for this
808 * \subsection sec2-3-2 Section 2.3.2: Locking
811 * This section covers the calling interfaces to the locking package. Many of
812 * the user-callable routines are actually implemented as macros.
814 * \subsubsection sec2-3-2-1 Section 2.3.2.1: Lock Init _ Initialize lock
818 * void Lock Init(IN struct Lock *lock)
820 * This function must be called on the given lock object before any other
821 * operations can be performed on it.
823 * ---No value is returned.
825 * \subsubsection sec2-3-2-2 Section 2.3.2.2: ObtainReadLock _ Acquire a
829 * void ObtainReadLock(IN struct Lock *lock)
831 * This macro obtains a read lock on the specified lock object. Since this is a
832 * macro and not a function call, results are not predictable if the value of
833 * the lock parameter is a side-effect producing expression, as it will be
834 * evaluated multiple times in the course of the macro interpretation.
835 * Read locks are incompatible with write, shared, and boosted shared locks.
837 * ---No value is returned.
839 * \subsubsection sec2-3-2-3 Section 2.3.2.3: ObtainWriteLock _ Acquire a
843 * void ObtainWriteLock(IN struct Lock *lock)
845 * This macro obtains a write lock on the specified lock object. Since this is
846 * a macro and not a function call, results are not predictable if the value of
847 * the lock parameter is a side-effect producing expression, as it will be
848 * evaluated multiple times in the course of the macro interpretation.
850 * Write locks are incompatible with all other locks.
852 * ---No value is returned.
854 * \subsubsection sec2-3-2-4 Section 2.3.2.4: ObtainSharedLock _ Acquire a
858 * void ObtainSharedLock(IN struct Lock *lock)
860 * This macro obtains a shared lock on the specified lock object. Since this is
861 * a macro and not a function call, results are not predictable if the value of
862 * the lock parameter is a side-effect producing expression, as it will be
863 * evaluated multiple times in the course of the macro interpretation.
865 * Shared locks are incompatible with write and boosted shared locks, but are
866 * compatible with read locks.
868 * ---No value is returned.
870 * \subsubsection sec2-3-2-5 Section 2.3.2.5: ReleaseReadLock _ Release
874 * void ReleaseReadLock(IN struct Lock *lock)
876 * This macro releases the specified lock. The lock must have been previously
877 * read-locked. Since this is a macro and not a function call, results are not
878 * predictable if the value of the lock parameter is a side-effect producing
879 * expression, as it will be evaluated multiple times in the course of the
880 * macro interpretation. The results are also unpredictable if the lock was not
881 * previously read-locked by the thread calling ReleaseReadLock().
883 * ---No value is returned.
885 * \subsubsection sec2-3-2-6 Section 2.3.2.6: ReleaseWriteLock _ Release
889 * void ReleaseWriteLock(IN struct Lock *lock)
891 * This macro releases the specified lock. The lock must have been previously
892 * write-locked. Since this is a macro and not a function call, results are not
893 * predictable if the value of the lock parameter is a side-effect producing
894 * expression, as it will be evaluated multiple times in the course of the
895 * macro interpretation. The results are also unpredictable if the lock was not
896 * previously write-locked by the thread calling ReleaseWriteLock().
898 * ---No value is returned.
900 * \subsubsection sec2-3-2-7 Section 2.3.2.7: ReleaseSharedLock _ Release
904 * void ReleaseSharedLock(IN struct Lock *lock)
906 * This macro releases the specified lock. The lock must have been previously
907 * share-locked. Since this is a macro and not a function call, results are not
908 * predictalbe if the value of the lock parameter is a side-effect producing
909 * expression, as it will be evaluated multiple times in the course of the
910 * macro interpretation. The results are also unpredictable if the lock was not
911 * previously share-locked by the thread calling ReleaseSharedLock().
913 * ---No value is returned.
915 * \subsubsection sec2-3-2-8 Section 2.3.2.8: CheckLock _ Determine state
919 * void CheckLock(IN struct Lock *lock)
921 * This macro produces an integer that specifies the status of the indicated
922 * lock. The value will be -1 if the lock is write-locked, 0 if unlocked, or
923 * otherwise a positive integer that indicates the number of readers (threads
924 * holding read locks). Since this is a macro and not a function call, results
925 * are not predictable if the value of the lock parameter is a side-effect
926 * producing expression, as it will be evaluated multiple times in the course
927 * of the macro interpretation.
929 * ---No value is returned.
931 * \subsubsection sec2-3-2-9 Section 2.3.2.9: BoostLock _ Boost a shared
935 * void BoostLock(IN struct Lock *lock)
937 * This macro promotes ("boosts") a shared lock into a write lock. Such a boost
938 * operation guarantees that no other writer can get into the critical section
939 * in the process. Since this is a macro and not a function call, results are
940 * not predictable if the value of the lock parameter is a side-effect
941 * producing expression, as it will be evaluated multiple times in the course
942 * of the macro interpretation.
944 * ---No value is returned.
946 * \subsubsection sec2-3-2-10 Section 2.3.2.10: UnboostLock _ Unboost a
950 * void UnboostLock(IN struct Lock *lock)
952 * This macro demotes a boosted shared lock back down into a regular shared
953 * lock. Such an unboost operation guarantees that no other writer can get into
954 * the critical section in the process. Since this is a macro and not a
955 * function call, results are not predictable if the value of the lock
956 * parameter is a side-effect producing expression, as it will be evaluated
957 * multiple times in the course of the macro interpretation.
959 * ---No value is returned.
961 * \subsection sec2-3-3 Section 2.3.3: IOMGR
964 * This section covers the calling interfaces to the I/O management package.
966 * \subsubsection sec2-3-3-1 Section: 2.3.3.1: IOMGR Initialize _
967 * Initialize the package
970 * int IOMGR Initialize()
972 * This function initializes the IOMGR package. Its main task is to create the
973 * IOMGR thread itself, which runs at the lowest possible priority (0). The
974 * remainder of the lightweight processes must be running at priority 1 or
975 * greater (up to a maximum of LWP MAX PRIORITY (4)) for the IOMGR package to
976 * function correctly.
978 * -1 The LWP and/or timer package haven't been initialized.
979 * \n <misc> Any errors that may be returned by the LWP CreateProcess()
982 * \subsubsection sec2-3-3-2 Section 2.3.3.2: IOMGR finalize _ Clean up
986 * int IOMGR finalize()
988 * This routine cleans up after the IOMGR package when it is no longer needed.
989 * It releases all storage and destroys the IOMGR thread itself.
991 * <misc> Any errors that may be returned by the LWP DestroyProcess() routine.
993 * \subsubsection sec2-3-3-3 Section 2.3.3.3: IOMGR Select _ Perform a
994 * thread-level select()
997 * int IOMGR Select (IN int numfds; IN int *rfds; IN int *wfds; IN int *xfds;
998 * IN truct timeval *timeout)
1000 * This routine performs an LWP version of unix select() operation. The
1001 * parameters have the same meanings as with the unix call. However, the return
1002 * values will be simplified (see below). If this is a polling select (i.e.,
1003 * the value of timeout is null), it is done and the IOMGR Select() function
1004 * returns to the user with the results. Otherwise, the calling thread is put
1005 * to sleep. If at some point the IOMGR thread is the only runnable process, it
1006 * will awaken and collect all select requests. The IOMGR will then perform a
1007 * single select and awaken the appropriate processes. This will force a return
1008 * from the affected IOMGR Select() calls.
1010 * -1 An error occurred.
1011 * \n 0 A timeout occurred.
1012 * \n 1 Some number of file descriptors are ready.
1014 * \subsubsection sec2-3-3-4 Section 2.3.3.4: IOMGR Signal _ Associate
1015 * unix and LWP signals
1018 * int IOMGR Signal(IN int signo; IN char *event)
1020 * This function associates an LWP signal with a unix signal. After this call,
1021 * when the given unix signal signo is delivered to the (heavyweight unix)
1022 * process, the IOMGR thread will deliver an LWP signal to the event via LWP
1023 * NoYieldSignal(). This wakes up any lightweight processes waiting on the
1024 * event. Multiple deliveries of the signal may be coalesced into one LWP
1025 * wakeup. The call to LWP NoYieldSignal() will happen synchronously. It is
1026 * safe for an LWP to check for some condition and then go to sleep waiting for
1027 * a unix signal without having to worry about delivery of the signal happening
1028 * between the check and the call to LWP WaitProcess().
1030 * LWP EBADSIG The signo value is out of range.
1031 * \n LWP EBADEVENT The event pointer is null.
1033 * \subsubsection sec2-3-3-5 Section 2.3.3.5: IOMGR CancelSignal _ Cancel
1034 * unix and LWP signal association
1037 * int IOMGR CancelSignal(IN int signo)
1039 * This routine cancels the association between a unix signal and an LWP event.
1040 * After calling this function, the unix signal signo will be handled however
1041 * it was handled before the corresponding call to IOMGR Signal().
1043 * LWP EBADSIG The signo value is out of range.
1045 * \subsubsection sec2-3-3-6 Section 2.3.3.6: IOMGR Sleep _ Sleep for a
1049 * void IOMGR Sleep(IN unsigned seconds)
1051 * This function calls IOMGR Select() with zero file descriptors and a timeout
1052 * structure set up to cause the thread to sleep for the given number of
1055 * ---No value is returned.
1057 * \subsection sec2-3-4 Section 2.3.4: Timer
1060 * This section covers the calling interface to the timer package associated
1061 * with the LWP facility.
1063 * \subsubsection sec2-3-4-1 Section 2.3.4.1: TM Init _ Initialize a timer
1067 * int TM Init(IN struct TM Elem **list)
1069 * This function causes the specified timer list to be initialized. TM Init()
1070 * must be called before any other timer operations are applied to the list.
1072 * -1 A null timer list could not be produced.
1074 * \subsubsection sec2-3-4-2 Section 2.3.4.2: TM final _ Clean up a timer
1078 * int TM final(IN struct TM Elem **list)
1080 * This routine is called when the given empty timer list is no longer needed.
1081 * All storage associated with the list is released.
1083 * -1 The list parameter is invalid.
1085 * \subsubsection sec2-3-4-3 Section 2.3.4.3: TM Insert _ Insert an object
1089 * void TM Insert(IN struct TM Elem **list; IN struct TM Elem *elem)
1091 * This routine enters an new element, elem, into the list denoted by list.
1092 * Before the new element is queued, its TimeLeft field (the amount of time
1093 * before the object comes due) is set to the value stored in its TotalTime
1094 * field. In order to keep TimeLeft fields current, the TM Rescan() function
1097 * ---No return value is generated.
1099 * \subsubsection sec2-3-4-4 Section 2.3.4.4: TM Rescan _ Update all
1100 * timers in the list
1103 * int TM Rescan(IN struct TM Elem *list)
1105 * This function updates the TimeLeft fields of all timers on the given list.
1106 * This is done by checking the time-of-day clock. Note: this is the only
1107 * routine other than TM Init() that updates the TimeLeft field in the elements
1110 * Instead of returning a value indicating success or failure, TM Rescan()
1111 * returns the number of entries that were discovered to have timed out.
1113 * ---Instead of error codes, the number of entries that were discovered to
1114 * have timed out is returned.
1116 * \subsubsection sec2-3-4-5 Section 2.3.4.5: TM GetExpired _ Returns an
1120 * struct TM Elem *TM GetExpired(IN struct TM Elem *list)
1122 * This routine searches the specified timer list and returns a pointer to an
1123 * expired timer element from that list. An expired timer is one whose TimeLeft
1124 * field is less than or equal to zero. If there are no expired timers, a null
1125 * element pointer is returned.
1127 * ---Instead of error codes, an expired timer pointer is returned, or a null
1128 * timer pointer if there are no expired timer objects.
1130 * \subsubsection sec2-3-4-6 Section 2.3.4.6: TM GetEarliest _ Returns
1131 * earliest unexpired timer
1134 * struct TM Elem *TM GetEarliest(IN struct TM Elem *list)
1136 * This function returns a pointer to the timer element that will be next to
1137 * expire on the given list. This is defined to be the timer element with the
1138 * smallest (positive) TimeLeft field. If there are no timers on the list, or
1139 * if they are all expired, this function will return a null pointer.
1141 * ---Instead of error codes, a pointer to the next timer element to expireis
1142 * returned, or a null timer object pointer if they are all expired.
1144 * \subsubsection sec2-3-4-7 Section 2.3.4.7: TM eql _ Test for equality
1148 * bool TM eql(IN struct timemval *t1; IN struct timemval *t2)
1150 * This function compares the given timestamps, t1 and t2, for equality. Note
1151 * that the function return value, bool, has been set via typedef to be
1152 * equivalent to unsigned char.
1154 * 0 If the two timestamps differ.
1155 * \n 1 If the two timestamps are identical.
1157 * \subsection sec2-3-5 Section 2.3.5: Fast Time
1159 * This section covers the calling interface to the fast time package
1160 * associated with the LWP facility.
1162 * \subsubsection sec2-3-5-1 Section 2.3.5.1: FT Init _ Initialize the
1166 * int FT Init(IN int printErrors; IN int notReally)
1168 * This routine initializes the fast time package, mapping in the kernel page
1169 * containing the time-of-day variable. The printErrors argument, if non-zero,
1170 * will cause any errors in initalization to be printed to stderr. The
1171 * notReally parameter specifies whether initialization is really to be done.
1172 * Other calls in this package will do auto-initialization, and hence the
1173 * option is offered here.
1175 * -1 Indicates that future calls to FT GetTimeOfDay() will still work, but
1176 * will not be able to access the information directly, having to make a
1177 * kernel call every time.
1179 * \subsubsection sec2-3-5-2 Section 2.3.5.2: FT GetTimeOfDay _ Initialize
1180 * the fast time package
1183 * int FT GetTimeOfDay(IN struct timeval *tv; IN struct timezone *tz)
1185 * This routine is meant to mimic the parameters and behavior of the unix
1186 * gettimeofday() function. However, as implemented, it simply calls
1187 * gettimeofday() and then does some bound-checking to make sure the value is
1190 * <misc> Whatever value was returned by gettimeofday() internally.
1192 * \subsection sec2-3-6 Section 2.3.6: Preemption
1194 * This section covers the calling interface to the preemption package
1195 * associated with the LWP facility.
1197 * \subsubsection sec2-3-6-1 Section 2.3.6.1: PRE InitPreempt _ Initialize
1198 * the preemption package
1201 * int PRE InitPreempt(IN struct timeval *slice)
1203 * This function must be called to initialize the preemption package. It must
1204 * appear sometime after the call to LWP InitializeProcessSupport() and
1205 * sometime before the first call to any other preemption routine. The slice
1206 * argument specifies the time slice size to use. If the slice pointer is set
1207 * to null in the call, then the default time slice, DEFAULTSLICE (10
1208 * milliseconds), will be used. This routine uses the unix interval timer and
1209 * handling of the unix alarm signal, SIGALRM, to implement this timeslicing.
1211 * LWP EINIT The LWP package hasn't been initialized.
1212 * \n LWP ESYSTEM Operations on the signal vector or the interval timer have
1215 * \subsubsection sec2-3-6-2 Section 2.3.6.2: PRE EndPreempt _ finalize
1216 * the preemption package
1219 * int PRE EndPreempt()
1221 * This routine finalizes use of the preemption package. No further preemptions
1222 * will be made. Note that it is not necessary to make this call before exit.
1223 * PRE EndPreempt() is provided only for those applications that wish to
1224 * continue after turning off preemption.
1226 * LWP EINIT The LWP package hasn't been initialized.
1227 * \n LWP ESYSTEM Operations on the signal vector or the interval timer have
1230 * \subsubsection sec2-3-6-3 Section 2.3.6.3: PRE PreemptMe _ Mark thread
1234 * int PRE PreemptMe()
1236 * This macro is used to signify the current thread as a candidate for
1237 * preemption. The LWP InitializeProcessSupport() routine must have been called
1238 * before PRE PreemptMe().
1240 * ---No return code is generated.
1242 * \subsubsection sec2-3-6-4 Section 2.3.6.4: PRE BeginCritical _ Enter
1243 * thread critical section
1246 * int PRE BeginCritical()
1248 * This macro places the current thread in a critical section. Upon return, and
1249 * for as long as the thread is in the critical section, involuntary
1250 * preemptions of this LWP will no longer occur.
1252 * ---No return code is generated.
1254 * \subsubsection sec2-3-6-5 Section 2.3.6.5: PRE EndCritical _ Exit
1255 * thread critical section
1258 * int PRE EndCritical()
1260 * This macro causes the executing thread to leave a critical section
1261 * previously entered via PRE BeginCritical(). If involuntary preemptions were
1262 * possible before the matching PRE BeginCritical(), they are once again
1265 * ---No return code is generated.
1267 * \page chap3 Chapter 3 -- Rxkad
1270 * \section sec3-1 Section 3.1: Introduction
1273 * The rxkad security module is offered as one of the built-in Rx
1274 * authentication models. It is based on the Kerberos system developed by MIT's
1275 * Project Athena. Readers wishing detailed information regarding Kerberos
1276 * design and implementation are directed to [2]. This chapter is devoted to
1277 * defining how Kerberos authentication services are made available as Rx
1278 * components, and assumes the reader has some familiarity with Kerberos.
1279 * Included are descriptions of how client-side and server-side Rx security
1280 * objects (struct rx securityClass; see Section 5.3.1.1) implementing this
1281 * protocol may be generated by an Rx application. Also, a description appears
1282 * of the set of routines available in the associated struct rx securityOps
1283 * structures, as covered in Section 5.3.1.2. It is strongly recommended that
1284 * the reader become familiar with this section on struct rx securityOps before
1287 * \section sec3-2 Section 3.2: Definitions
1290 * An important set of definitions related to the rxkad security package is
1291 * provided by the rxkad.h include file. Determined here are various values for
1292 * ticket lifetimes, along with structures for encryption keys and Kerberos
1293 * principals. Declarations for the two routines required to generate the
1294 * different rxkad security objects also appear here. The two functions are
1295 * named rxkad NewServerSecurityObject() and rxkad NewClientSecurityObject().
1296 * In addition, type field values, encryption levels, security index
1297 * operations, and statistics structures may be found in this file.
1298 * \section sec3-3 Section 3.3: Exported Objects
1300 * To be usable as an Rx security module, the rxkad facility exports routines
1301 * to create server-side and client-side security objects. The server
1302 * authentication object is incorporated into the server code when calling rx
1303 * NewService(). The client authentication object is incorporated into the
1304 * client code every time a connection is established via rx NewConnection().
1305 * Also, in order to implement these security objects, the rxkad module must
1306 * provide definitions for some subset of the generic security operations as
1307 * defined in the appropriate struct rx securityOps variable.
1309 * \subsection sec3-3-1 Section 3.3.1: Server-Side Mechanisms
1311 * \subsubsection sec3-3-1-1 Section 3.3.1.1: Security Operations
1314 * The server side of the rxkad module fills in all but two of the possible
1315 * routines associated with an Rx security object, as described in Section
1319 * static struct rx_securityOps rxkad_server_ops = {
1321 * rxkad_NewConnection,
1322 * rxkad_PreparePacket, /* Once per packet creation */
1323 * 0, /* Send packet (once per retrans) */
1324 * rxkad_CheckAuthentication,
1325 * rxkad_CreateChallenge,
1326 * rxkad_GetChallenge,
1328 * rxkad_CheckResponse, /* Check data packet */
1329 * rxkad_DestroyConnection,
1335 * The rxkad service does not need to take any special action each time a
1336 * packet belonging to a call in an rxkad Rx connection is physically
1337 * transmitted. Thus, a routine is not supplied for the op SendPacket()
1338 * function slot. Similarly, no preparatory work needs to be done previous to
1339 * the reception of a response packet from a security challenge, so the op
1340 * GetResponse() function slot is also empty.
1342 * \subsubsection sec3-3-1-2 Section 3.3.1.2: Security Object
1345 * The exported routine used to generate an rxkad-specific server-side security
1346 * class object is named rxdad NewServerSecurityObject(). It is declared with
1347 * four parameters, as follows:
1350 * struct rx_securityClass *
1351 * rxkad_NewServerSecurityObject(a_level, a_getKeyRockP, a_getKeyP, a_userOKP)
1352 * rxkad_level a_level; /* Minimum level */
1353 * char *a_getKeyRockP; /* Rock for get_key implementor */
1354 * int (*a_getKeyP)(); /* Passed kvno & addr(key) to fill */
1355 * int (*a_userOKP)(); /* Passed name, inst, cell => bool */
1359 * The first argument specifies the desired level of encryption, and may take
1360 * on the following values (as defined in rxkad.h):
1361 * \li rxkad clear: Specifies that packets are to be sent entirely in the
1362 * clear, without any encryption whatsoever.
1363 * \li rxkad auth: Specifies that packet sequence numbers are to be encrypted.
1364 * \li rxkad crypt: Specifies that the entire data packet is to be encrypted.
1367 * The second and third parameters represent, respectively, a pointer to a
1368 * private data area, sometimes called a "rock", and a procedure reference that
1369 * is called with the key version number accompanying the Kerberos ticket and
1370 * returns a pointer to the server's decryption key. The fourth argument, if
1371 * not null, is a pointer to a function that will be called for every new
1372 * connection with the client's name, instance, and cell. This routine should
1373 * return zero if the user is not acceptable to the server.
1375 * \subsection sec3-3-2 Section 3.3.2: Client-Side Mechanisms
1377 * \subsubsection sec3-3-2-1 Section 3.3.2.1: Security Operations
1380 * The client side of the rxkad module fills in relatively few of the routines
1381 * associated with an Rx security object, as demonstrated below. The general Rx
1382 * security object, of which this is an instance, is described in detail in
1386 * static struct rx_securityOps rxkad_client_ops = {
1388 * rxkad_NewConnection, /* Every new connection */
1389 * rxkad_PreparePacket, /* Once per packet creation */
1390 * 0, /* Send packet (once per retrans) */
1394 * rxkad_GetResponse, /* Respond to challenge packet */
1396 * rxkad_CheckPacket, /* Check data packet */
1397 * rxkad_DestroyConnection,
1406 * As expected, routines are defined for use when someone destroys a security
1407 * object (rxkad Close()) and when an Rx connection using the rxkad model
1408 * creates a new connection (rxkad NewConnection()) or deletes an existing one
1409 * (rxkad DestroyConnection()). Security-specific operations must also be
1410 * performed in behalf of rxkad when packets are created (rxkad
1411 * PreparePacket()) and received (rxkad CheckPacket()). finally, the client
1412 * side of an rxkad security object must also be capable of constructing
1413 * responses to security challenges from the server (rxkad GetResponse()) and
1414 * be willing to reveal statistics on its own operation (rxkad GetStats()).
1416 * \subsubsection sec3-3-2-2 Section 3.3.2.2: Security Object
1419 * The exported routine used to generate an rxkad-specific client-side security
1420 * class object is named rxkad NewClientSecurityObject(). It is declared with
1421 * five parameters, specified below:
1424 * struct rx_securityClass * rxkad_NewClientSecurityObject(
1431 * rxkad_level a_level;
1432 * struct ktc_encryptionKey *a_sessionKeyP;
1439 * The first parameter, a level, specifies the level of encryption desired for
1440 * this security object, with legal choices being identical to those defined
1441 * for the server-side security object described in Section 3.3.1.2. The second
1442 * parameter, a sessionKeyP, provides the session key to use. The ktc
1443 * encryptionKey structure is defined in the rxkad.h include file, and consists
1444 * of an array of 8 characters. The third parameter, a kvno, provides the key
1445 * version number associated with a sessionKeyP. The fourth argument, a
1446 * ticketLen, communicates the length in bytes of the data stored in the fifth
1447 * parameter, a ticketP, which points to the Kerberos ticket to use for the
1448 * principal for which the security object will operate.
1450 * \page chap4 Chapter 4 -- Rx Support Packages
1452 * \section sec4-1 Section 4.1: Introduction
1454 * This chapter documents three packages defined directly in support of the Rx
1456 * \li rx queue: Doubly-linked queue package.
1457 * \li rx clock: Clock package, using the 4.3BSD interval timer.
1458 * \li rx event: Future events package.
1460 * References to constants, structures, and functions defined by these support
1461 * packages will appear in the following API chapter.
1463 * \section sec4-2 Section 4.2: The rx queue Package
1466 * This package provides a doubly-linked queue structure, along with a full
1467 * suite of related operations. The main concern behind the coding of this
1468 * facility was efficiency. All functions are implemented as macros, and it is
1469 * suggested that only simple expressions be used for all parameters.
1471 * The rx queue facility is defined by the rx queue.h include file. Some macros
1472 * visible in this file are intended for rx queue internal use only. An
1473 * understanding of these "hidden" macros is important, so they will also be
1474 * described by this document.
1476 * \subsection sec4-2-1 Section 4.2.1: struct queue
1479 * The queue structure provides the linkage information required to maintain a
1480 * queue of objects. The queue structure is prepended to any user-defined data
1481 * type which is to be organized in this fashion.
1483 * \li struct queue *prev - Pointer to the previous queue header.
1484 * \li struct queue *next - Pointer to the next queue header.
1486 * Note that a null Rx queue consists of a single struct queue object whose
1487 * next and previous pointers refer to itself.
1489 * \subsection sec4-2-2 Section 4.2.2: Internal Operations
1492 * This section describes the internal operations defined for Rx queues. They
1493 * will be referenced by the external operations documented in Section 4.2.3.
1495 * \subsection sec4-2-2-1 Section 4.2.2.1: Q(): Coerce type to a queue
1499 * \#define _Q(x) ((struct queue *)(x))
1501 * This operation coerces the user structure named by x to a queue element. Any
1502 * user structure using the rx queue package must have a struct queue as its
1505 * \subsubsection sec4-2-2-2 Section 4.2.2.2: QA(): Add a queue element
1506 * before/after another element
1509 * \#define _QA(q,i,a,b) (((i->a=q->a)->b=i)->b=q, q->a=i)
1511 * This operation adds the queue element referenced by i either before or after
1512 * a queue element represented by q. If the (a, b) argument pair corresponds to
1513 * an element's (next, prev) fields, the new element at i will be linked after
1514 * q. If the (a, b) argument pair corresponds to an element's (prev, next)
1515 * fields, the new element at i will be linked before q.
1517 * \subsubsection sec4-2-2-3 QR(): Remove a queue element
1520 * \#define _QR(i) ((_Q(i)->prev->next=_Q(i)->next)->prev=_Q(i)->prev)
1522 * This operation removes the queue element referenced by i from its queue. The
1523 * prev and next fields within queue element i itself is not updated to reflect
1524 * the fact that it is no longer part of the queue.
1526 * \subsubsection sec4-2-2-4 QS(): Splice two queues together
1529 * \#define _QS(q1,q2,a,b) if (queue_IsEmpty(q2)); else
1530 * ((((q2->a->b=q1)->a->b=q2->b)->a=q1->a, q1->a=q2->a), queue_Init(q2))
1532 * This operation takes the queues identified by q1 and q2 and splices them
1533 * together into a single queue. The order in which the two queues are appended
1534 * is determined by the a and b arguments. If the (a, b) argument pair
1535 * corresponds to q1's (next, prev) fields, then q2 is appended to q1. If the
1536 * (a, b) argument pair corresponds to q1's (prev, next) fields, then q is
1539 * This internal QS() routine uses two exported queue operations, namely queue
1540 * Init() and queue IsEmpty(), defined in Sections 4.2.3.1 and 4.2.3.16
1541 * respectively below.
1543 * \subsection sec4-2-3 Section 4.2.3: External Operations
1545 * \subsubsection sec4-2-3-1 Section 4.2.3.1: queue Init(): Initialize a
1549 * \#define queue_Init(q) (_Q(q))->prev = (_Q(q))->next = (_Q(q))
1551 * The queue header referred to by the q argument is initialized so that it
1552 * describes a null (empty) queue. A queue head is simply a queue element.
1554 * \subsubsection sec4-2-3-2 Section 4.2.3.2: queue Prepend(): Put element
1555 * at the head of a queue
1558 * \#define queue_Prepend(q,i) _QA(_Q(q),_Q(i),next,prev)
1560 * Place queue element i at the head of the queue denoted by q. The new queue
1561 * element, i, should not currently be on any queue.
1563 * \subsubsection sec4-2-3-3 Section 4.2.3.3: queue Append(): Put an
1564 * element a the tail of a queue
1567 * \#define queue_Append(q,i) _QA(_Q(q),_Q(i),prev,next)
1569 * Place queue element i at the tail of the queue denoted by q. The new queue
1570 * element, i, should not currently be on any queue.
1572 * \subsection sec4-2-3-4 Section 4.2.3.4: queue InsertBefore(): Insert a
1573 * queue element before another element
1576 * \#define queue_InsertBefore(i1,i2) _QA(_Q(i1),_Q(i2),prev,next)
1578 * Insert queue element i2 before element i1 in i1's queue. The new queue
1579 * element, i2, should not currently be on any queue.
1581 * \subsubsection sec4-2-3-5 Section 4.2.3.5: queue InsertAfter(): Insert
1582 * a queue element after another element
1585 * \#define queue_InsertAfter(i1,i2) _QA(_Q(i1),_Q(i2),next,prev)
1587 * Insert queue element i2 after element i1 in i1's queue. The new queue
1588 * element, i2, should not currently be on any queue.
1590 * \subsubsection sec4-2-3-6 Section: 4.2.3.6: queue SplicePrepend():
1591 * Splice one queue before another
1594 * \#define queue_SplicePrepend(q1,q2) _QS(_Q(q1),_Q(q2),next,prev)
1596 * Splice the members of the queue located at q2 to the beginning of the queue
1597 * located at q1, reinitializing queue q2.
1599 * \subsubsection sec4-2-3-7 Section 4.2.3.7: queue SpliceAppend(): Splice
1600 * one queue after another
1603 * \#define queue_SpliceAppend(q1,q2) _QS(_Q(q1),_Q(q2),prev,next)
1605 * Splice the members of the queue located at q2 to the end of the queue
1606 * located at q1, reinitializing queue q2. Note that the implementation of
1607 * queue SpliceAppend() is identical to that of queue SplicePrepend() except
1608 * for the order of the next and prev arguments to the internal queue splicer,
1611 * \subsubsection sec4-2-3-8 Section 4.2.3.8: queue Replace(): Replace the
1612 * contents of a queue with that of another
1615 * \#define queue_Replace(q1,q2) (*_Q(q1) = *_Q(q2),
1616 * \n _Q(q1)->next->prev = _Q(q1)->prev->next = _Q(q1),
1617 * \n queue_Init(q2))
1619 * Replace the contents of the queue located at q1 with the contents of the
1620 * queue located at q2. The prev and next fields from q2 are copied into the
1621 * queue object referenced by q1, and the appropriate element pointers are
1622 * reassigned. After the replacement has occurred, the queue header at q2 is
1625 * \subsubsection sec4-2-3-9 Section 4.2.3.9: queue Remove(): Remove an
1626 * element from its queue
1629 * \#define queue_Remove(i) (_QR(i), _Q(i)->next = 0)
1631 * This function removes the queue element located at i from its queue. The
1632 * next field for the removed entry is zeroed. Note that multiple removals of
1633 * the same queue item are not supported.
1635 * \subsubsection sec4-2-3-10 Section 4.2.3.10: queue MoveAppend(): Move
1636 * an element from its queue to the end of another queue
1639 * \#define queue_MoveAppend(q,i) (_QR(i), queue_Append(q,i))
1641 * This macro removes the queue element located at i from its current queue.
1642 * Once removed, the element at i is appended to the end of the queue located
1645 * \subsubsection sec4-2-3-11 Section 4.2.3.11: queue MovePrepend(): Move
1646 * an element from its queue to the head of another queue
1649 * \#define queue_MovePrepend(q,i) (_QR(i), queue_Prepend(q,i))
1651 * This macro removes the queue element located at i from its current queue.
1652 * Once removed, the element at i is inserted at the head fo the queue located
1655 * \subsubsection sec4-2-3-12 Section 4.2.3.12: queue first(): Return the
1656 * first element of a queue, coerced to a particular type
1659 * \#define queue_first(q,s) ((struct s *)_Q(q)->next)
1661 * Return a pointer to the first element of the queue located at q. The
1662 * returned pointer value is coerced to conform to the given s structure. Note
1663 * that a properly coerced pointer to the queue head is returned if q is empty.
1665 * \subsubsection sec4-2-3-13 Section 4.2.3.13: queue Last(): Return the
1666 * last element of a queue, coerced to a particular type
1669 * \#define queue_Last(q,s) ((struct s *)_Q(q)->prev)
1671 * Return a pointer to the last element of the queue located at q. The returned
1672 * pointer value is coerced to conform to the given s structure. Note that a
1673 * properly coerced pointer to the queue head is returned if q is empty.
1675 * \subsubsection sec4-2-3-14 Section 4.2.3.14: queue Next(): Return the
1676 * next element of a queue, coerced to a particular type
1679 * \#define queue_Next(i,s) ((struct s *)_Q(i)->next)
1681 * Return a pointer to the queue element occuring after the element located at
1682 * i. The returned pointer value is coerced to conform to the given s
1683 * structure. Note that a properly coerced pointer to the queue head is
1684 * returned if item i is the last in its queue.
1686 * \subsubsection sec4-2-3-15 Section 4.2.3.15: queue Prev(): Return the
1687 * next element of a queue, coerced to a particular type
1690 * \#define queue_Prev(i,s) ((struct s *)_Q(i)->prev)
1692 * Return a pointer to the queue element occuring before the element located at
1693 * i. The returned pointer value is coerced to conform to the given s
1694 * structure. Note that a properly coerced pointer to the queue head is
1695 * returned if item i is the first in its queue.
1697 * \subsubsection sec4-2-3-16 Section 4.2.3.16: queue IsEmpty(): Is the
1698 * given queue empty?
1701 * \#define queue_IsEmpty(q) (_Q(q)->next == _Q(q))
1703 * Return a non-zero value if the queue located at q does not have any elements
1704 * in it. In this case, the queue consists solely of the queue header at q
1705 * whose next and prev fields reference itself.
1707 * \subsubsection sec4-2-3-17 Section 4.2.3.17: queue IsNotEmpty(): Is the
1708 * given queue not empty?
1711 * \#define queue_IsNotEmpty(q) (_Q(q)->next != _Q(q))
1713 * Return a non-zero value if the queue located at q has at least one element
1714 * in it other than the queue header itself.
1716 * \subsubsection sec4-2-3-18 Section 4.2.3.18: queue IsOnQueue(): Is an
1717 * element currently queued?
1720 * \#define queue_IsOnQueue(i) (_Q(i)->next != 0)
1722 * This macro returns a non-zero value if the queue item located at i is
1723 * currently a member of a queue. This is determined by examining its next
1724 * field. If it is non-null, the element is considered to be queued. Note that
1725 * any element operated on by queue Remove() (Section 4.2.3.9) will have had
1726 * its next field zeroed. Hence, it would cause a non-zero return from this
1729 * \subsubsection sec4-2-3-19 Section 4.2.3.19: queue Isfirst(): Is an
1730 * element the first on a queue?
1733 * \#define queue_Isfirst(q,i) (_Q(q)->first == _Q(i))
1735 * This macro returns a non-zero value if the queue item located at i is the
1736 * first element in the queue denoted by q.
1738 * \subsubsection sec4-2-3-20 Section 4.2.3.20: queue IsLast(): Is an
1739 * element the last on a queue?
1742 * \#define queue_IsLast(q,i) (_Q(q)->prev == _Q(i))
1744 * This macro returns a non-zero value if the queue item located at i is the
1745 * last element in the queue denoted by q.
1747 * \subsubsection sec4-2-3-21 Section 4.2.3.21: queue IsEnd(): Is an
1748 * element the end of a queue?
1751 * \#define queue_IsEnd(q,i) (_Q(q) == _Q(i))
1753 * This macro returns a non-zero value if the queue item located at i is the
1754 * end of the queue located at q. Basically, it determines whether a queue
1755 * element in question is also the queue header structure itself, and thus does
1756 * not represent an actual queue element. This function is useful for
1757 * terminating an iterative sweep through a queue, identifying when the search
1758 * has wrapped to the queue header.
1760 * \subsubsection sec4-2-3-22 Section 4.2.3.22: queue Scan(): for loop
1761 * test for scanning a queue in a forward direction
1764 * \#define queue_Scan(q, qe, next, s)
1765 * \n (qe) = queue_first(q, s), next = queue_Next(qe, s);
1766 * \n !queue_IsEnd(q, qe);
1767 * \n (qe) = (next), next = queue_Next(qe, s)
1769 * This macro may be used as the body of a for loop test intended to scan
1770 * through each element in the queue located at q. The qe argument is used as
1771 * the for loop variable. The next argument is used to store the next value for
1772 * qe in the upcoming loop iteration. The s argument provides the name of the
1773 * structure to which each queue element is to be coerced. Thus, the values
1774 * provided for the qe and next arguments must be of type (struct s *).
1776 * An example of how queue Scan() may be used appears in the code fragment
1777 * below. It declares a structure named mystruct, which is suitable for
1778 * queueing. This queueable structure is composed of the queue pointers
1779 * themselves followed by an integer value. The actual queue header is kept in
1780 * demoQueue, and the currItemP and nextItemP variables are used to step
1781 * through the demoQueue. The queue Scan() macro is used in the for loop to
1782 * generate references in currItemP to each queue element in turn for each
1783 * iteration. The loop is used to increment every queued structure's myval
1791 * struct queue demoQueue;
1792 * struct mystruct *currItemP, *nextItemP;
1794 * for (queue_Scan(&demoQueue, currItemP, nextItemP, mystruct)) {
1795 * currItemP->myval++;
1800 * Note that extra initializers can be added before the body of the queue
1801 * Scan() invocation above, and extra expressions can be added afterwards.
1803 * \subsubsection sec4-2-3-23 Section 4.2.3.23: queue ScanBackwards(): for
1804 * loop test for scanning a queue in a reverse direction
1807 * #define queue_ScanBackwards(q, qe, prev, s)
1808 * \n (qe) = queue_Last(q, s), prev = queue_Prev(qe, s);
1809 * \n !queue_IsEnd(q, qe);
1810 * \n (qe) = prev, prev = queue_Prev(qe, s)
1812 * This macro is identical to the queue Scan() macro described above in Section
1813 * 4.2.3.22 except for the fact that the given queue is scanned backwards,
1814 * starting at the last item in the queue.
1816 * \section sec4-3 Section 4.3: The rx clock Package
1819 * This package maintains a clock which is independent of the time of day. It
1820 * uses the unix 4.3BSD interval timer (e.g., getitimer(), setitimer()) in
1821 * TIMER REAL mode. Its definition and interface may be found in the rx clock.h
1824 * \subsection sec4-3-1 Section 4.3.1: struct clock
1827 * This structure is used to represent a clock value as understood by this
1828 * package. It consists of two fields, storing the number of seconds and
1829 * microseconds that have elapsed since the associated clock Init() routine has
1833 * \n long sec -Seconds since call to clock Init().
1834 * \n long usec -Microseconds since call to clock Init().
1836 * \subsection sec4-3-2 Section 4.3.12: clock nUpdates
1839 * The integer-valued clock nUpdates is a variable exported by the rx clock
1840 * facility. It records the number of times the clock value is actually
1841 * updated. It is bumped each time the clock UpdateTime() routine is called, as
1842 * described in Section 4.3.3.2.
1844 * \subsection sec4-3-3 Section 4.3.3: Operations
1846 * \subsubsection sec4-3-3-1 Section 4.3.3.1: clock Init(): Initialize the
1850 * This routine uses the unix setitimer() call to initialize the unix interval
1851 * timer. If the setitimer() call fails, an error message will appear on
1852 * stderr, and an exit(1) will be executed.
1854 * \subsubsection sec4-3-3-2 Section 4.3.3.2: clock UpdateTime(): Compute
1858 * The clock UpdateTime() function calls the unix getitimer() routine in order
1859 * to update the current time. The exported clock nUpdates variable is
1860 * incremented each time the clock UpdateTime() routine is called.
1862 * \subsubsection sec4-3-3-3 Section 4.3.3.3: clock GetTime(): Return the
1863 * current clock time
1866 * This macro updates the current time if necessary, and returns the current
1867 * time into the cv argument, which is declared to be of type (struct clock *).
1868 * 4.3.3.4 clock Sec(): Get the current clock time, truncated to seconds
1869 * This macro returns the long value of the sec field of the current time. The
1870 * recorded time is updated if necessary before the above value is returned.
1872 * \subsubsection sec4-3-3-5 Section 4.3.3.5: clock ElapsedTime(): Measure
1873 * milliseconds between two given clock values
1876 * This macro returns the elapsed time in milliseconds between the two clock
1877 * structure pointers provided as arguments, cv1 and cv2.
1879 * \subsubsection sec4-3-3-6 Section 4.3.3.6: clock Advance(): Advance the
1880 * recorded clock time by a specified clock value
1883 * This macro takes a single (struct clock *) pointer argument, cv, and adds
1884 * this clock value to the internal clock value maintined by the package.
1886 * \subsubsection sec4-3-3-7 Section 4.3.3.7: clock Gt(): Is a clock value
1887 * greater than another?
1890 * This macro takes two parameters of type (struct clock *), a and b. It
1891 * returns a nonzero value if the a parameter points to a clock value which is
1892 * later than the one pointed to by b.
1894 * \subsubsection sec4-3-3-8 Section 4.3.3.8: clock Ge(): Is a clock value
1895 * greater than or equal to another?
1898 * This macro takes two parameters of type (struct clock *), a and b. It
1899 * returns a nonzero value if the a parameter points to a clock value which is
1900 * greater than or equal to the one pointed to by b.
1902 * \subsubsection sec4-3-3-9 Section 4.3.3.9: clock Gt(): Are two clock
1906 * This macro takes two parameters of type (struct clock *), a and b. It
1907 * returns a non-zero value if the clock values pointed to by a and b are
1910 * \subsubsection sec4.3.3.10 Section 4.3.3.10: clock Le(): Is a clock
1911 * value less than or equal to another?
1914 * This macro takes two parameters of type (struct clock *), a and b. It
1915 * returns a nonzero value if the a parameter points to a clock value which is
1916 * less than or equal to the one pointed to by b.
1918 * \subsubsection sec4-3-3-11 Section 4.3.3.11: clock Lt(): Is a clock
1919 * value less than another?
1922 * This macro takes two parameters of type (struct clock *), a and b. It
1923 * returns a nonzero value if the a parameter points to a clock value which is
1924 * less than the one pointed to by b.
1926 * \subsubsection sec4-3-3-12 Section 4.3.3.12: clock IsZero(): Is a clock
1930 * This macro takes a single parameter of type (struct clock *), c. It returns
1931 * a non-zero value if the c parameter points to a clock value which is equal
1934 * \subsubsection sec4-3-3-13 Section 4.3.3.13: clock Zero(): Set a clock
1938 * This macro takes a single parameter of type (struct clock *), c. It sets the
1939 * given clock value to zero.
1940 * \subsubsection sec4-3-3-14 Section 4.3.3.14: clock Add(): Add two clock
1943 * This macro takes two parameters of type (struct clock *), c1 and c2. It adds
1944 * the value of the time in c2 to c1. Both clock values must be positive.
1946 * \subsubsection sec4-3-3-15 Section 4.3.3.15: clock Sub(): Subtract two
1950 * This macro takes two parameters of type (struct clock *), c1 and c2. It
1951 * subtracts the value of the time in c2 from c1. The time pointed to by c2
1952 * should be less than the time pointed to by c1.
1954 * \subsubsection sec4-3-3-16 Section 4.3.3.16: clock Float(): Convert a
1955 * clock time into floating point
1958 * This macro takes a single parameter of type (struct clock *), c. It
1959 * expresses the given clock value as a floating point number.
1961 * \section sec4-4 Section 4.4: The rx event Package
1964 * This package maintains an event facility. An event is defined to be
1965 * something that happens at or after a specified clock time, unless cancelled
1966 * prematurely. The clock times used are those provided by the rx clock
1967 * facility described in Section 4.3 above. A user routine associated with an
1968 * event is called with the appropriate arguments when that event occurs. There
1969 * are some restrictions on user routines associated with such events. first,
1970 * this user-supplied routine should not cause process preemption. Also, the
1971 * event passed to the user routine is still resident on the event queue at the
1972 * time of invocation. The user must not remove this event explicitly (via an
1973 * event Cancel(), see below). Rather, the user routine may remove or schedule
1974 * any other event at this time.
1976 * The events recorded by this package are kept queued in order of expiration
1977 * time, so that the first entry in the queue corresponds to the event which is
1978 * the first to expire. This interface is defined by the rx event.h include
1981 * \subsection sec4-4-1 Section 4.4.1: struct rxevent
1984 * This structure defines the format of an Rx event record.
1987 * \n struct queue junk -The queue to which this event belongs.
1988 * \n struct clock eventTime -The clock time recording when this event comes
1990 * \n int (*func)() -The user-supplied function to call upon expiration.
1991 * \n char *arg -The first argument to the (*func)() function above.
1992 * \n char *arg1 -The second argument to the (*func)() function above.
1994 * \subsection sec4-4-2 Section 4.4.2: Operations
1997 * This section covers the interface routines provided for the Rx event
2000 * \subsubsection sec4-4-2-1 Section 4.4.2.1: rxevent Init(): Initialize
2004 * The rxevent Init() routine takes two arguments. The first, nEvents, is an
2005 * integer-valued parameter which specifies the number of event structures to
2006 * allocate at one time. This specifies the appropriate granularity of memory
2007 * allocation by the event package. The second parameter, scheduler, is a
2008 * pointer to an integer-valued function. This function is to be called when an
2009 * event is posted (added to the set of events managed by the package) that is
2010 * scheduled to expire before any other existing event.
2012 * This routine sets up future event allocation block sizes, initializes the
2013 * queues used to manage active and free event structures, and recalls that an
2014 * initialization has occurred. Thus, this function may be safely called
2017 * \subsubsection sec4-4-2-2 Section 4.4.2.2: rxevent Post(): Schedule an
2021 * This function constructs a new event based on the information included in
2022 * its parameters and then schedules it. The rxevent Post() routine takes four
2023 * parameters. The first is named when, and is of type (struct clock *). It
2024 * specifies the clock time at which the event is to occur. The second
2025 * parameter is named func and is a pointer to the integer-valued function to
2026 * associate with the event that will be created. When the event comes due,
2027 * this function will be executed by the event package. The next two arguments
2028 * to rxevent Post() are named arg and arg1, and are both of type (char *).
2029 * They serve as the two arguments thath will be supplied to the func routine
2030 * when the event comes due.
2032 * If the given event is set to take place before any other event currently
2033 * posted, the scheduler routine established when the rxevent Init() routine
2034 * was called will be executed. This gives the application a chance to react to
2035 * this new event in a reasonable way. One might expect that this scheduler
2036 * routine will alter sleep times used by the application to make sure that it
2037 * executes in time to handle the new event.
2039 * \subsubsection sec4-4-2-3 Section 4.4.2.3: rxevent Cancel 1(): Cancel
2040 * an event (internal use)
2043 * This routine removes an event from the set managed by this package. It takes
2044 * a single parameter named ev of type (struct rxevent *). The ev argument
2045 * identifies the pending event to be cancelled.
2047 * The rxevent Cancel 1() routine should never be called directly. Rather, it
2048 * should be accessed through the rxevent Cancel() macro, described in Section
2051 * \subsubsection sec4-4-2-4 Section 4.4.2.4: rxevent Cancel(): Cancel an
2052 * event (external use)
2055 * This macro is the proper way to call the rxevent Cancel 1() routine
2056 * described in Section 4.4.2.3 above. Like rxevent Cancel 1(), it takes a
2057 * single argument. This event ptr argument is of type (struct rxevent *), and
2058 * identi#es the pending event to be cancelled. This macro #rst checks to see
2059 * if event ptr is null. If not, it calls rxevent Cancel 1() to perform the
2060 * real work. The event ptr argument is zeroed after the cancellation operation
2063 * \subsubsection sec4-4-2-5 Section 4.4.2.4: rxevent RaiseEvents():
2064 * Initialize the event package
2067 * This function processes all events that have expired relative to the current
2068 * clock time maintained by the event package. Each qualifying event is removed
2069 * from the queue in order, and its user-supplied routine (func()) is executed
2070 * with the associated arguments.
2072 * The rxevent RaiseEvents() routine takes a single output parameter named
2073 * next, defined to be of type (struct clock *). Upon completion of rxevent
2074 * RaiseEvents(), the relative time to the next event due to expire is placed
2075 * in next. This knowledge may be used to calculate the amount of sleep time
2076 * before more event processing is needed. If there is no recorded event which
2077 * is still pending at this point, rxevent RaiseEvents() returns a zeroed clock
2080 * \subsubsection sec4-4-2-6 Section 4.4.2.6: rxevent TimeToNextEvent():
2081 * Get amount of time until the next event expires
2084 * This function returns the time between the current clock value as maintained
2085 * by the event package and the the next event's expiration time. This
2086 * information is placed in the single output argument,interval, defined to be
2087 * of type (struct clock *). The rxevent TimeToNextEvent() function returns
2088 * integer-valued quantities. If there are no scheduled events, a zero is
2089 * returned. If there are one or more scheduled events, a 1 is returned. If
2090 * zero is returned, the interval argument is not updated.
2092 * \page chap5 Chapter 5 -- Programming Interface
2094 * \section sec5-1 Section 5.1: Introduction
2097 * This chapter documents the API for the Rx facility. Included are
2098 * descriptions of all the constants, structures, exported variables, macros,
2099 * and interface functions available to the application programmer. This
2100 * interface is identical regardless of whether the application lives within
2101 * the unix kernel or above it.
2103 * This chapter actually provides more information than what may be strictly
2104 * considered the Rx API. Many objects that were intended to be opaque and for
2105 * Rx internal use only are also described here. The reason driving the
2106 * inclusion of this "extra" information is that such exported Rx interface
2107 * files as rx.h make these objects visible to application programmers. It is
2108 * prefereable to describe these objects here than to ignore them and leave
2109 * application programmers wondering as to their meaning.
2111 * An example application illustrating the use of this interface, showcasing
2112 * code from both server and client sides, appears in the following chapter.
2114 * \section sec5-2 Section 5.2: Constants
2117 * This section covers the basic constant definitions of interest to the Rx
2118 * application programmer. Each subsection is devoted to describing the
2119 * constants falling into the following categories:
2120 * \li Configuration quantities
2121 * \li Waiting options
2122 * \li Connection ID operations
2123 * \li Connection flags
2124 * \li Connection types
2128 * \li Packet header flags
2131 * \li Packet classes
2132 * \li Conditions prompting ack packets
2135 * \li Debugging values
2137 * An attempt has been made to relate these constant definitions to the objects
2138 * or routines that utilize them.
2140 * \subsection sec5-2-1 Section 5.2.1: Configuration Quantities
2143 * These definitions provide some basic Rx configuration parameters, including
2144 * the number of simultaneous calls that may be handled on a single connection,
2145 * lightweight thread parameters, and timeouts for various operations.
2152 * Default idle dead time for connections, in seconds.
2159 * The maximum number of Rx services that may be installed within one
2163 * RX PROCESS MAXCALLS
2167 * The maximum number of asynchronous calls active simultaneously on any given
2168 * Rx connection. This value must be set to a power of two.
2171 * RX DEFAULT STACK SIZE
2175 * Default lightweight thread stack size, measured in bytes. This value may be
2176 * overridden by calling the rx_SetStackSize() macro.
2179 * RX PROCESS PRIORITY
2181 * LWP NORMAL PRIORITY
2183 * This is the priority under which an Rx thread should run. There should not
2184 * generally be any reason to change this setting.
2187 * RX CHALLENGE TIMEOUT
2191 * The number of seconds before another authentication request packet is
2199 * Maximum number of individual acknowledgements that may be carried in an Rx
2200 * acknowledgement packet.
2202 * \subsection sec5-2-2 Section 5.2.2: Waiting Options
2205 * These definitions provide readable values indicating whether an operation
2206 * should block when packet buffer resources are not available.
2213 * Wait until the associated operation completes.
2220 * Don't wait if the associated operation would block.
2222 * \subsection sec5-2-3 Section 5.2.3: Connection ID Operations
2225 * These values assist in extracting the call channel number from a connection
2226 * identifier. A call channel is the index of a particular asynchronous call
2227 * structure within a single Rx connection.
2234 * Number of bits to right-shift to isolate a connection ID. Must be set to
2235 * the log (base two) of RX MAXCALLS.
2242 * Mask used to isolate a call channel from a connection ID field.
2249 * Mask used to isolate the connection ID from its field, masking out the call
2250 * channel information.
2252 * \subsection sec5-2-4 Section 5.2.4: Connection Flags
2255 * The values defined here appear in the flags field of Rx connections, as
2256 * defined by the rx connection structure described in Section 5.3.2.2.
2259 * RX CONN MAKECALL WAITING
2263 * rx MakeCall() is waiting for a channel.
2266 * RX CONN DESTROY ME
2270 * Destroy this (client) connection after its last call completes.
2273 * RX CONN USING PACKET CKSUM
2277 * This packet is using security-related check-summing (a non-zero header,
2278 * spare field has been seen.)
2280 * \subsection sec5-2-5 Section 5.2.5: Connection Types
2283 * Rx stores different information in its connection structures, depending on
2284 * whether the given connection represents the server side (the one providing
2285 * the service) or the client side (the one requesting the service) of the
2286 * protocol. The type field within the connection structure (described in
2287 * Section 5.3.2.2) takes on the following values to differentiate the two
2288 * types of connections, and identifies the fields that are active within the
2289 * connection structure.
2292 * RX CLIENT CONNECTION
2296 * This is a client-side connection.
2303 * This is a server-side connection.
2305 * \subsection sec5-2-6 Section 5.2.6: Call States
2308 * An Rx call on a particular connection may be in one of several states at any
2309 * instant in time. The following definitions identify the range of states that
2310 * a call may assume.
2317 * The call structure has never been used, and is thus still completely
2325 * A call is not yet in progress, but packets have arrived for it anyway. This
2326 * only applies to calls within server-side connections.
2333 * This call is fully active, having an attached lightweight thread operating
2341 * The call structure is "dallying" after its lightweight thread has completed
2342 * its most recent call. This is a "hot-standby" condition, where the call
2343 * structure preserves state from the previous call and thus optimizes the
2344 * arrival of further, related calls.
2346 * \subsection sec5-2-7 Section 5.2.7: Call Flags:
2349 * These values are used within the flags field of a variable declared to be of
2350 * type struct rx call, as described in Section 5.3.2.4. They provide
2351 * additional information as to the state of the given Rx call, such as the
2352 * type of event for which it is waiting (if any) and whether or not all
2353 * incoming packets have been received in support of the call.
2356 * RX CALL READER WAIT
2360 * Reader is waiting for next packet.
2363 * RX CALL WAIT WINDOW ALLOC
2367 * Sender is waiting for a window so that it can allocate buffers.
2370 * RX CALL WAIT WINDOW SEND
2374 * Sender is waiting for a window so that it can send buffers.
2377 * RX CALL WAIT PACKETS
2381 * Sender is waiting for packet buffers.
2384 * RX CALL RECEIVE DONE
2388 * The call is waiting for a lightweight thread to be assigned to the operation
2389 * it has just received.
2392 * RX CALL RECEIVE DONE
2396 * All packets have been received on this call.
2403 * The receive queue has been cleared when in precall state.
2405 * \subsection sec5-2-8 Section 5.2.8: Call Modes
2408 * These values define the modes of an Rx call when it is in the RX STATE
2409 * ACTIVE state, having a lightweight thread assigned to it.
2416 * We are sending or ready to send.
2423 * We are receiving or ready to receive.
2430 * Something went wrong in the current conversation.
2437 * The server side has flushed (or the client side has read) the last reply
2440 * \subsection sec5-2-9 Section 5.2.9: Packet Header Flags
2443 * Rx packets carry a flag field in their headers, providing additional
2444 * information regarding the packet's contents. The Rx packet header's flag
2445 * field's bits may take the following values:
2448 * RX CLIENT INITIATED
2452 * Signifies that a packet has been sent/received from the client side of the
2460 * The Rx calls' peer entity requests an acknowledgement.
2467 * This is the final packet from this side of the call.
2474 * There are more packets following this, i.e., the next sequence number seen
2475 * by the receiver should be greater than this one, rather than a
2476 * retransmission of an earlier sequence number.
2481 * (RX CLIENT INITIATED | RX LAST PACKET)
2483 * This flag is preset once per Rx packet. It doesn't change on retransmission
2486 * \subsection sec5-3-10 Section 5.2.10: Packet Sizes
2489 * These values provide sizing information on the various regions within Rx
2490 * packets. These packet sections include the IP/UDP headers and bodies as well
2491 * Rx header and bodies. Also covered are such values as different maximum
2492 * packet sizes depending on whether they are targeted to peers on the same
2493 * local network or a more far-flung network. Note that the MTU term appearing
2494 * below is an abbreviation for Maximum Transmission Unit.
2501 * The number of bytes taken up by IP/UDP headers.
2504 * RX MAX PACKET SIZE
2506 * (1500 - RX IPUDP SIZE)
2508 * This is the Ethernet MTU minus IP and UDP header sizes.
2513 * sizeof (struct rx header)
2515 * The number of bytes in an Rx packet header.
2518 * RX MAX PACKET DATA SIZE
2520 * (RX MAX PACKET SIZE RX - HEADER SIZE)
2522 * Maximum size in bytes of the user data in a packet.
2525 * RX LOCAL PACKET SIZE
2527 * RX MAX PACKET SIZE
2529 * Packet size in bytes to use when being sent to a host on the same net.
2532 * RX REMOTE PACKET SIZE
2534 * (576 - RX IPUDP SIZE)
2536 * Packet size in bytes to use when being sent to a host on a different net.
2538 * \subsection sec5-2-11 Section 5.2.11: Packet Types
2541 * The following values are used in the packetType field within a struct rx
2542 * packet, and define the different roles assumed by Rx packets. These roles
2543 * include user data packets, different flavors of acknowledgements, busies,
2544 * aborts, authentication challenges and responses, and debugging vehicles.
2547 * RX PACKET TYPE DATA
2551 * A user data packet.
2554 * RX PACKET TYPE ACK
2558 * Acknowledgement packet.
2561 * RX PACKET TYPE BUSY
2565 * Busy packet. The server-side entity cannot accept the call at the moment,
2566 * but the requestor is encouraged to try again later.
2569 * RX PACKET TYPE ABORT
2573 * Abort packet. No response is needed for this packet type.
2576 * RX PACKET TYPE ACKALL
2580 * Acknowledges receipt of all packets on a call.
2583 * RX PACKET TYPE CHALLENGE
2587 * Challenge the client's identity, requesting credentials.
2590 * RX PACKET TYPE RESPONSE
2594 * Response to a RX PACKET TYPE CHALLENGE authentication challenge packet.
2597 * RX PACKET TYPE DEBUG
2601 * Request for debugging information.
2608 * The number of Rx packet types defined above. Note that it also includes
2609 * packet type 0 (which is unused) in the count.
2612 * The RX PACKET TYPES definition provides a mapping of the above values to
2613 * human-readable string names, and is exported by the rx packetTypes variable
2614 * catalogued in Section 5.4.9.
2629 * \subsection sec5-2-12 Section 5.2.12: Packet Classes
2632 * These definitions are used internally to manage alloction of Rx packet
2633 * buffers according to quota classifications. Each packet belongs to one of
2634 * the following classes, and its buffer is derived from the corresponding
2638 * RX PACKET CLASS RECEIVE
2642 * Receive packet for user data.
2645 * RX PACKET CLASS SEND
2649 * Send packet for user data.
2652 * RX PACKET CLASS SPECIAL
2656 * A special packet that does not hold user data, such as an acknowledgement or
2657 * authentication challenge.
2660 * RX N PACKET CLASSES
2664 * The number of Rx packet classes defined above.
2666 * \subsection sec5-2-13 Section 5.2.13: Conditions Prompting Ack Packets
2669 * Rx acknowledgement packets are constructed and sent by the protocol
2670 * according to the following reasons. These values appear in the Rx packet
2671 * header of the ack packet itself.
2678 * The peer has explicitly requested an ack on this packet.
2685 * A duplicate packet has been received.
2688 * RX ACK OUT OF SEQUENCE
2692 * A packet has arrived out of sequence.
2695 * RX ACK EXCEEDS WINDOW
2699 * A packet sequence number higher than maximum value allowed by the call's
2700 * window has been received.
2707 * No packet buffer space is available.
2714 * Acknowledgement for keep-alive purposes.
2717 * RX ACK PING RESPONSE
2721 * Response to a RX ACK PING packet.
2728 * An ack generated due to a period of inactivity after normal packet
2731 * \subsection 5-2-14 Section 5.2.14: Acknowledgement Types
2734 * These are the set of values placed into the acks array in an Rx
2735 * acknowledgement packet, whose data format is defined by struct rx ackPacket.
2736 * These definitions are used to convey positive or negative acknowledgements
2737 * for a given range of packets.
2744 * Receiver doesn't currently have the associated packet; it may never hae been
2745 * received, or received and then later dropped before processing.
2752 * Receiver has the associated packet queued, although it may later decide to
2755 * \subsection sec5-2-15 Section 5.2.15: Error Codes
2758 * Rx employs error codes ranging from -1 to -64. The Rxgen stub generator may
2759 * use other error codes less than -64. User programs calling on Rx, on the
2760 * other hand, are expected to return positive error codes. A return value of
2761 * zero is interpreted as an indication that the given operation completed
2769 * A connection has been inactive past Rx's tolerance levels and has been shut
2773 * RX INVALID OPERATION
2777 * An invalid operation has been attempted, including such protocol errors as
2778 * having a client-side call send data after having received the beginning of a
2779 * reply from its server-side peer.
2786 * The (optional) timeout value placed on this call has been exceeded (see
2787 * Sections 5.5.3.4 and 5.6.5).
2794 * Unexpected end of data on a read operation.
2801 * An unspecified low-level Rx protocol error has occurred.
2808 * A generic user abort code, used when no more specific error code needs to be
2809 * communicated. For example, Rx clients employing the multicast feature (see
2810 * Section 1.2.8) take advantage of this error code.
2812 * \subsection sec5-2-16 Section 5.2.16: Debugging Values
2815 * Rx provides a set of data collections that convey information about its
2816 * internal status and performance. The following values have been defined in
2817 * support of this debugging and statistics-collection feature.
2819 * \subsubsection sec5-3-16-1 Section 5.2.16.1: Version Information
2822 * Various versions of the Rx debugging/statistics interface are in existance,
2823 * each defining different data collections and handling certain bugs. Each Rx
2824 * facility is stamped with a version number of its debugging/statistics
2825 * interface, allowing its clients to tailor their requests to the precise data
2826 * collections that are supported by a particular Rx entity, and to properly
2827 * interpret the data formats received through this interface. All existing Rx
2828 * implementations should be at revision M.
2831 * RX DEBUGI VERSION MINIMUM
2835 * The earliest version of Rx statistics available.
2842 * The latest version of Rx statistics available.
2845 * RX DEBUGI VERSION W SECSTATS
2849 * Identifies the earliest version in which statistics concerning Rx security
2850 * objects is available.
2853 * RX DEBUGI VERSION W GETALLCONN
2857 * The first version that supports getting information about all current Rx
2858 * connections, as specified y the RX DEBUGI GETALLCONN debugging request
2859 * packet opcode described below.
2862 * RX DEBUGI VERSION W RXSTATS
2866 * The first version that supports getting all the Rx statistics in one
2867 * operation, as specified by the RX DEBUGI RXSTATS debugging request packet
2868 * opcode described below.
2871 * RX DEBUGI VERSION W UNALIGNED CONN
2875 * There was an alignment problem discovered when returning Rx connection
2876 * information in older versions of this debugging/statistics interface. This
2877 * identifies the last version that exhibited this alignment problem.
2879 * \subsubsection sec5-2-16-2 Section 5.2.16.2: Opcodes
2882 * When requesting debugging/statistics information, the caller specifies one
2883 * of the following supported data collections:
2886 * RX DEBUGI GETSTATS
2890 * Get basic Rx statistics.
2897 * Get information on all Rx connections considered "interesting" (as defined
2898 * below), and no others.
2901 * RX DEBUGI GETALLCONN
2905 * Get information on all existing Rx connection structures, even
2906 * "uninteresting" ones.
2913 * Get all available Rx stats.
2916 * An Rx connection is considered "interesting" if it is waiting for a call
2917 * channel to free up or if it has been marked for destruction. If neither is
2918 * true, a connection is still considered interesting if any of its call
2919 * channels is actively handling a call or in its preparatory pre-call state.
2920 * Failing all the above conditions, a connection is still tagged as
2921 * interesting if any of its call channels is in either of the RX MODE SENDING
2922 * or RX MODE RECEIVING modes, which are not allowed when the call is not
2925 * \subsubsection sec5-2-16-3 Section 5.2.16.3: Queuing
2928 * These two queueing-related values indicate whether packets are present on
2929 * the incoming and outgoing packet queues for a given Rx call. These values
2930 * are only used in support of debugging and statistics-gathering operations.
2937 * Packets available in in queue.
2944 * Packets available in out queue.
2946 * \section sec5-3 Section 5.3: Structures
2949 * This section describes the major exported Rx data structures of interest to
2950 * application programmers. The following categories are utilized for the
2951 * purpose of organizing the structure descriptions:
2952 * \li Security objects
2953 * \li Protocol objects
2954 * \li Packet formats
2955 * \li Debugging and statistics
2958 * Please note that many fields described in this section are declared to be
2959 * VOID. This is defined to be char, and is used to get around some compiler
2961 * \subsection sec5-3-1 Section 5.3.1: Security Objects
2964 * As explained in Section 1.2.1, Rx provides a modular, extensible security
2965 * model. This allows Rx applications to either use one of the built-in
2966 * security/authentication protocol packages or write and plug in one of their
2967 * own. This section examines the various structural components used by Rx to
2968 * support generic security and authentication modules.
2970 * \subsubsection sec5-3-1-1 Section 5.3.1.1: struct rx securityOps
2973 * As previously described, each Rx security object must export a fixed set of
2974 * interface functions, providing the full set of operations defined on the
2975 * object. The rx securityOps structure defines the array of functions
2976 * comprising this interface. The Rx facility calls these routines at the
2977 * appropriate times, without knowing the specifics of how any particular
2978 * security object implements the operation.
2980 * A complete description of these interface functions, including information
2981 * regarding their exact purpose, parameters, and calling conventions, may be
2982 * found in Section 5.5.7.
2985 * \li int (*op Close)() - React to the disposal of a security object.
2986 * \li int (*op NewConnection)() - Invoked each time a new Rx connection
2987 * utilizing the associated security object is created.
2988 * \li int (*op PreparePacket)() - Invoked each time an outgoing Rx packet is
2989 * created and sent on a connection using the given security object.
2990 * \li int (*op SendPacket)() - Called each time a packet belonging to a call
2991 * in a connection using the security object is physically transmitted.
2992 * \li int (*op CheckAuthentication)() - This function is executed each time it
2993 * is necessary to check whether authenticated calls are being perfomed on a
2994 * connection using the associated security object.
2995 * \li int (*op CreateChallenge)() - Invoked each time a server-side challenge
2996 * event is created by Rx, namely when the identity of the principal associated
2997 * with the peer process must be determined.
2998 * \li int (*op GetChallenge)() - Called each time a client-side packet is
2999 * constructed in response to an authentication challenge.
3000 * \li int (*op GetResponse)() - Executed each time a response to a challenge
3001 * event must be received on the server side of a connection.
3002 * \li int (*op CheckResponse)() - Invoked each time a response to an
3003 * authentication has been received, validating the response and pulling out
3004 * the required authentication information.
3005 * \li int (*op CheckPacket) () - Invoked each time an Rx packet has been
3006 * received, making sure that the packet is properly formatted and that it
3007 * hasn't been altered.
3008 * \li int (*op DestroyConnection)() - Called each time an Rx connection
3009 * employing the given security object is destroyed.
3010 * \li int (*op GetStats)() - Executed each time a request for statistics on
3011 * the given security object has been received.
3012 * \li int (*op Spare1)()-int (*op Spare3)() - Three spare function slots,
3013 * reserved for future use.
3015 * \subsubsection sec5-3-1-2 Section 5.2.1.2: struct rx securityClass
3018 * Variables of type struct rx securityClass are used to represent
3019 * instantiations of a particular security model employed by Rx. It consists of
3020 * a pointer to the set of interface operations implementing the given security
3021 * object, along with a pointer to private storage as necessary to support its
3022 * operations. These security objects are also reference-counted, tracking the
3023 * number of Rx connections in existance that use the given security object. If
3024 * the reference count drops to zero, the security module may garbage-collect
3025 * the space taken by the unused security object.
3028 * \li struct rx securityOps *ops - Pointer to the array of interface functions
3029 * for the security object.
3030 * \li VOID *privateData - Pointer to a region of storage used by the security
3031 * object to support its operations.
3032 * \li int refCount - A reference count on the security object, tracking the
3033 * number of Rx connections employing this model.
3035 * \subsubsection sec5-3-1-3 Section 5.3.1.3: struct rx
3036 * securityObjectStats
3039 * This structure is used to report characteristics for an instantiation of a
3040 * security object on a particular Rx connection, as well as performance
3041 * figures for that object. It is used by the debugging portions of the Rx
3042 * package. Every security object defines and manages fields such as level and
3043 * flags differently.
3046 * \li char type - The type of security object being implemented. Existing
3048 * \li 0: The null security package.
3049 * \li 1: An obsolete Kerberos-like security object.
3050 * \li 2: The rxkad discipline (see Chapter 3).
3051 * \li char level - The level at which encryption is utilized.
3052 * \li char sparec[10] - Used solely for alignment purposes.
3053 * \li long flags - Status flags regarding aspects of the connection relating
3054 * to the security object.
3055 * \li u long expires - Absolute time when the authentication information
3056 * cached by the given connection expires. A value of zero indicates that the
3057 * associated authentication information is valid for all time.
3058 * \li u long packetsReceived - Number of packets received on this particular
3059 * connection, and thus the number of incoming packets handled by the
3060 * associated security object.
3061 * \li u long packetsSent - Number of packets sent on this particular
3062 * connection, and thus the number of outgoing packets handled by the
3063 * associated security object.
3064 * \li u long bytesReceived - Overall number of "payload" bytes received (i.e.,
3065 * packet bytes not associated with IP headers, UDP headers, and the security
3066 * module's own header and trailer regions) on this connection.
3067 * \li u long bytesSent - Overall number of "payload" bytes sent (i.e., packet
3068 * bytes not associated with IP headers, UDP headers, and the security module's
3069 * own header and trailer regions) on this connection.
3070 * \li short spares[4] - Several shortword spares, reserved for future use.
3071 * \li long sparel[8] - Several longword spares, reserved for future use.
3073 * \subsection sec5-3-2 Section 5.3.2: Protocol Objects
3076 * The structures describing the main abstractions and entities provided by Rx,
3077 * namely services, peers, connections and calls are covered in this section.
3079 * \subsubsection sec5-3-2-1 Section 5.3.2.1: struct rx service
3082 * An Rx-based server exports services, or specific RPC interfaces that
3083 * accomplish certain tasks. Services are identified by (host-address,
3084 * UDP-port, serviceID) triples. An Rx service is installed and initialized on
3085 * a given host through the use of the rx NewService() routine (See Section
3086 * 5.6.3). Incoming calls are stamped with the Rx service type, and must match
3087 * an installed service to be accepted. Internally, Rx services also carry
3088 * string names for purposes of identification. These strings are useful to
3089 * remote debugging and statistics-gathering programs. The use of a service ID
3090 * allows a single server process to export multiple, independently-specified
3093 * Each Rx service contains one or more security classes, as implemented by
3094 * individual security objects. These security objects implement end-to-end
3095 * security protocols. Individual peer-to-peer connections established on
3096 * behalf of an Rx service will select exactly one of the supported security
3097 * objects to define the authentication procedures followed by all calls
3098 * associated with the connection. Applications are not limited to using only
3099 * the core set of built-in security objects offered by Rx. They are free to
3100 * define their own security objects in order to execute the specific protocols
3103 * It is possible to specify both the minimum and maximum number of lightweight
3104 * processes available to handle simultaneous calls directed to an Rx service.
3105 * In addition, certain procedures may be registered with the service and
3106 * called at set times in the course of handling an RPC request.
3109 * \li u short serviceId - The associated service number.
3110 * \li u short servicePort - The chosen UDP port for this service.
3111 * \li char *serviceName - The human-readable service name, expressed as a
3113 * \li string. osi socket socket - The socket structure or file descriptor used
3115 * \li u short nSecurityObjects - The number of entries in the array of
3116 * supported security objects.
3117 * \li struct rx securityClass **securityObjects - The array of pointers to the
3119 * vice's security class objects.
3120 * \li long (*executeRequestProc)() - A pointer to the routine to call when an
3121 * RPC request is received for this service.
3122 * \li VOID (*destroyConnProc)() - A pointer to the routine to call when one of
3123 * the server-side connections associated with this service is destroyed.
3124 * \li VOID (*newConnProc)() - A pointer to the routine to call when a
3125 * server-side connection associated with this service is created.
3126 * \li VOID (*beforeProc)() - A pointer to the routine to call before an
3127 * individual RPC call on one of this service's connections is executed.
3128 * \li VOID (*afterProc)() - A pointer to the routine to call after an
3129 * individual RPC call on one of this service's connections is executed.
3130 * \li short nRequestsRunning - The number of simultaneous RPC calls currently
3131 * in progress for this service.
3132 * \li short maxProcs - This field has two meanings. first, maxProcs limits the
3133 * total number of requests that may execute in parallel for any one service.
3134 * It also guarantees that this many requests may be handled in parallel if
3135 * there are no active calls for any other service.
3136 * \li short minProcs - The minimum number of lightweight threads (hence
3137 * requests) guaranteed to be simultaneously executable.
3138 * \li short connDeadTime - The number of seconds until a client of this
3139 * service will be declared to be dead, if it is not responding to the RPC
3141 * \li short idleDeadTime - The number of seconds a server-side connection for
3142 * this service will wait for packet I/O to resume after a quiescent period
3143 * before the connection is marked as dead.
3145 * \subsubsection sec5-3-2-2 Section 5.3.2.2: struct rx connection
3148 * An Rx connection represents an authenticated communication path, allowing
3149 * multiple asynchronous conversations (calls). Each connection is identified
3150 * by a connection ID. The low-order bits of the connection ID are reserved so
3151 * they may be stamped with the index of a particular call channel. With up to
3152 * RX MAXCALLS concurrent calls (set to 4 in this implementation), the bottom
3153 * two bits are set aside for this purpose. The connection ID is not sufficient
3154 * by itself to uniquely identify an Rx connection. Should a client crash and
3155 * restart, it may reuse a connection ID, causing inconsistent results. In
3156 * addition to the connection ID, the epoch, or start time for the client side
3157 * of the connection, is used to identify a connection. Should the above
3158 * scenario occur, a different epoch value will be chosen by the client,
3159 * differentiating this incarnation from the orphaned connection record on the
3162 * Each connection is associated with a parent service, which defines a set of
3163 * supported security models. At creation time, an Rx connection selects the
3164 * particular security protocol it will implement, referencing the associated
3165 * service. The connection structure maintains state about the individual calls
3166 * being simultaneously handled.
3169 * \li struct rx connection *next - Used for internal queueing.
3170 * \li struct rx peer *peer - Pointer to the connection's peer information (see
3172 * \li u long epoch - Process start time of the client side of the connection.
3173 * \li u long cid - Connection identifier. The call channel (i.e., the index
3174 * into the connection's array of call structures) may appear in the bottom
3176 * \li VOID *rock - Pointer to an arbitrary region of memory in support of the
3177 * connection's operation. The contents of this area are opaque to the Rx
3178 * facility in general, but are understood by any special routines used by this
3180 * \li struct rx call *call[RX MAXCALLS] - Pointer to the call channel
3181 * structures, describing up to RX MAXCALLS concurrent calls on this
3183 * \li u long callNumber[RX MAXCALLS] - The set of current call numbers on each
3184 * of the call channels.
3185 * \li int timeout - Obsolete; no longer used.
3186 * \li u char flags - Various states of the connection; see Section 5.2.4 for
3187 * individual bit definitions.
3188 * \li u char type - Whether the connection is a server-side or client-side
3189 * one. See Section 5.2.5 for individual bit definitions.
3190 * \li u short serviceId - The service ID that should be stamped on requests.
3191 * This field is only used by client-side instances of connection structures.
3192 * \li struct rx service *service - A pointer to the service structure
3193 * associated with this connection. This field is only used by server-side
3194 * instances of connection structures.
3195 * \li u long serial - Serial number of the next outgoing packet associated
3196 * with this connection.
3197 * \li u long lastSerial - Serial number of the last packet received in
3198 * association with this connection. This field is used in computing packet
3200 * \li u short secondsUntilDead - Maximum numer of seconds of silence that
3201 * should be tolerated from the connection's peer before calls will be
3202 * terminated with an RX CALL DEAD error.
3203 * \li u char secondsUntilPing - The number of seconds between "pings"
3204 * (keep-alive probes) when at least one call is active on this connection.
3205 * \li u char securityIndex - The index of the security object being used by
3206 * this connection. This number selects a slot in the security class array
3207 * maintained by the service associated with the connection.
3208 * \li long error - Records the latest error code for calls occurring on this
3210 * \li struct rx securityClass *securityObject - A pointer to the security
3211 * object used by this connection. This should coincide with the slot value
3212 * chosen by the securityIndex field described above.
3213 * \li VOID *securityData - A pointer to a region dedicated to hosting any
3214 * storage required by the security object being used by this connection.
3215 * \li u short securityHeaderSize - The length in bytes of the portion of the
3216 * packet header before the user's data that contains the security module's
3218 * \li u short securityMaxTrailerSize - The length in bytes of the packet
3219 * trailer, appearing after the user's data, as mandated by the connection's
3221 * \li struct rxevent *challengeEvent -Pointer to an event that is scheduled
3222 * when the server side of the connection is challenging the client to
3223 * authenticate itself.
3224 * \li int lastSendTime - The last time a packet was sent on this connection.
3225 * \li long maxSerial - The largest serial number seen on incoming packets.
3226 * \li u short hardDeadTime - The maximum number of seconds that any call on
3227 * this connection may execute. This serves to throttle runaway calls.
3229 * \subsubsection sec5-3-2-3 Section 5.3.2.3: struct rx peer
3232 * For each connection, Rx maintains information describing the entity, or
3233 * peer, on the other side of the wire. A peer is identified by a (host,
3234 * UDP-port) pair. Included in the information kept on this remote
3235 * communication endpoint are such network parameters as the maximum packet
3236 * size supported by the host, current readings on round trip time to
3237 * retransmission delays, and packet skew (see Section 1.2.7). There are also
3238 * congestion control fields, ranging from descriptions of the maximum number
3239 * of packets that may be sent to the peer without pausing and retransmission
3240 * statistics. Peer structures are shared between connections whenever
3241 * possible, and hence are reference-counted. A peer object may be
3242 * garbage-collected if it is not actively referenced by any connection
3243 * structure and a sufficient period of time has lapsed since the reference
3244 * count dropped to zero.
3247 * \li struct rx peer *next - Use to access internal lists.
3248 * \li u long host - Remote IP address, in network byte order
3249 * \li u short port - Remote UDP port, in network byte order
3250 * \li short packetSize - Maximum packet size for this host, if known.
3251 * \li u long idleWhen - When the refCount reference count field (see below)
3253 * \li short refCount - Reference count for this structure
3254 * \li u char burstSize - Reinitialization size for the burst field (below).
3255 * \li u char burst - Number of packets that can be transmitted immediately
3257 * \li struct clock burstWait - Time delay until new burst aimed at this peer
3259 * \li struct queue congestionQueue - Queue of RPC call descriptors that are
3260 * waiting for a non-zero burst value.
3261 * \li int rtt - Round trip time to the peer, measured in milliseconds.
3262 * \li struct clock timeout - Current retransmission delay to the peer.
3263 * \li int nSent - Total number of distinct data packets sent, not including
3265 * \li int reSends - Total number of retransmissions for this peer since the
3266 * peer structure instance was created.
3267 * \li u long inPacketSkew - Maximum skew on incoming packets (see Section
3269 * \li u long outPacketSkew - Peer-reported maximum skew on outgoing packets
3270 * (see Section 1.2.7).
3272 * \subsubsection sec5-3-2-4 Section 5.3.2.4: struct rx call
3275 * This structure records the state of an active call proceeding on a given Rx
3276 * connection. As described above, each connection may have up to RX MAXCALLS
3277 * calls active at any one instant, and thus each connection maintains an array
3278 * of RX MAXCALLS rx call structures. The information contained here is
3279 * specific to the given call; "permanent" call state, such as the call number,
3280 * is maintained in the connection structure itself.
3283 * \li struct queue queue item header - Queueing information for this
3285 * \li struct queue tq - Queue of outgoing ("transmit") packets.
3286 * \li struct queue rq - Queue of incoming ("receive") packets.
3287 * \li char *bufPtr - Pointer to the next byte to fill or read in the call's
3288 * current packet, depending on whether it is being transmitted or received.
3289 * \li u short nLeft - Number of bytes left to read in the first packet in the
3290 * reception queue (see field rq).
3291 * \li u short nFree - Number of bytes still free in the last packet in the
3292 * transmission queue (see field tq).
3293 * \li struct rx packet *currentPacket - Pointer to the current packet being
3294 * assembled or read.
3295 * \li struct rx connection *conn - Pointer to the parent connection for this
3297 * \li u long *callNumber - Pointer to call number field within the call's
3299 * \li u char channel - Index within the parent connection's call array that
3300 * describes this call.
3301 * \li u char dummy1, dummy2 - These are spare fields, reserved for future use.
3302 * \li u char state - Current call state. The associated bit definitions appear
3304 * \li u char mode - Current mode of a call that is in RX STATE ACTIVE state.
3305 * The associated bit definitions appear in Section 5.2.8.
3306 * \li u char flags - Flags pertaining to the state of the given call. The
3307 * associated bit definitions appear in Section 5.2.7.
3308 * \li u char localStatus - Local user status information, sent out of band.
3309 * This field is currently not in use, set to zero.
3310 * \li u char remoteStatus - Remote user status information, received out of
3311 * band. This field is currently not in use, set to zero.
3312 * \li long error - Error condition for this call.
3313 * \li u long timeout - High level timeout for this call
3314 * \li u long rnext - Next packet sequence number expected to be received.
3315 * \li u long rprev - Sequence number of the previous packet received. This
3316 * number is used to decide the proper sequence number for the next packet to
3317 * arrive, and may be used to generate a negative acknowledgement.
3318 * \li u long rwind - Width of the packet receive window for this call. The
3319 * peer must not send packets with sequence numbers greater than or equal to
3321 * \li u long tfirst - Sequence number of the first unacknowledged transmit
3322 * packet for this call.
3323 * \li u long tnext - Next sequence number to use for an outgoing packet.
3324 * \li u long twind - Width of the packet transmit window for this call. Rx
3325 * cannot assign a sequence number to an outgoing packet greater than or equal
3326 * to tfirst + twind.
3327 * \li struct rxevent *resendEvent - Pointer to a pending retransmission event,
3329 * \li struct rxevent *timeoutEvent - Pointer to a pending timeout event, if
3331 * \li struct rxevent *keepAliveEvent - Pointer to a pending keep-alive event,
3332 * if this is an active call.
3333 * \li struct rxevent *delayedAckEvent - Pointer to a pending delayed
3334 * acknowledgement packet event, if any. Transmission of a delayed
3335 * acknowledgement packet is scheduled after all outgoing packets for a call
3336 * have been sent. If neither a reply nor a new call are received by the time
3337 * the delayedAckEvent activates, the ack packet will be sent.
3338 * \li int lastSendTime - Last time a packet was sent for this call.
3339 * \li int lastReceiveTime - Last time a packet was received for this call.
3340 * \li VOID (*arrivalProc)() - Pointer to the procedure to call when reply is
3342 * \li VOID *arrivalProcHandle - Pointer to the handle to pass to the
3343 * arrivalProc as its first argument.
3344 * \li VOID *arrivalProcArg - Pointer to an additional argument to pass to the
3345 * given arrivalProc.
3346 * \li u long lastAcked - Sequence number of the last packet "hard-acked" by
3347 * the receiver. A packet is considered to be hard-acked if an acknowledgement
3348 * is generated after the reader has processed it. The Rx facility may
3349 * sometimes "soft-ack" a windowfull of packets before they have been picked up
3351 * \li u long startTime - The time this call started running.
3352 * \li u long startWait - The time that a server began waiting for input data
3355 * \subsection sec5-3-3 Section 5.3.3: Packet Formats
3358 * The following sections cover the different data formats employed by the
3359 * suite of Rx packet types, as enumerated in Section 5.2.11. A description of
3360 * the most commonly-employed Rx packet header appears first, immediately
3361 * followed by a description of the generic packet container and descriptor.
3362 * The formats for Rx acknowledgement packets and debugging/statistics packets
3363 * are also examined.
3365 * \subsubsection sec5-3-3-1 Section 5.3.3.1: struct rx header
3368 * Every Rx packet has its own header region, physically located after the
3369 * leading IP/UDP headers. This header contains connection, call, security, and
3370 * sequencing information. Along with a type identifier, these fields allow the
3371 * receiver to properly interpret the packet. In addition, every client relates
3372 * its "epoch", or Rx incarnation date, in each packet. This assists in
3373 * identifying protocol problems arising from reuse of connection identifiers
3374 * due to a client restart. Also included in the header is a byte of
3375 * user-defined status information, allowing out-of-band channel of
3376 * communication for the higher-level application using Rx as a transport
3380 * \li u long epoch - Birth time of the client Rx facility.
3381 * \li u long cid - Connection identifier, as defined by the client. The last
3382 * RX CIDSHIFT bits in the cid field identify which of the server-side RX
3383 * MAXCALLS call channels is to receive the packet.
3384 * \li u long callNumber - The current call number on the chosen call channel.
3385 * \li u long seq - Sequence number of this packet. Sequence numbers start with
3386 * 0 for each new Rx call.
3387 * \li u long serial - This packet's serial number. A new serial number is
3388 * stamped on each packet transmitted (or retransmitted).
3389 * \li u char type - What type of Rx packet this is; see Section 5.2.11 for the
3390 * list of legal definitions.
3391 * \li u char flags - Flags describing this packet; see Section 5.2.9 for the
3392 * list of legal settings.
3393 * \li u char userStatus - User-defined status information, uninterpreted by
3394 * the Rx facility itself. This field may be easily set or retrieved from Rx
3395 * packets via calls to the rx GetLocalStatus(), rx SetLocalStatus(), rx
3396 * GetRemoteStatus(), and rx SetRemoteStatus() macros.
3397 * \li u char securityIndex - Index in the associated server-side service class
3398 * of the security object used by this call.
3399 * \li u short serviceId - The server-provided service ID to which this packet
3401 * \li u short spare - This field was originally a true spare, but is now used
3402 * by the built-in rxkad security module for packet header checksums. See the
3403 * descriptions of the related rx IsUsingPktChecksum(), rx GetPacketCksum(),
3404 * and rx SetPacketCksum() macros.
3406 * \subsubsection sec5-3-3-2 Section 5.3.3.2: struct rx packet
3409 * This structure is used to describe an Rx packet, and includes the wire
3410 * version of the packet contents, where all fields exist in network byte
3411 * order. It also includes acknowledgement, length, type, and queueing
3415 * \li struct queue queueItemHeader - field used for internal queueing.
3416 * \li u char acked - If non-zero, this field indicates that this packet has
3417 * been tentatively (soft-) acknowledged. Thus, the packet has been accepted by
3418 * the rx peer entity on the other side of the connection, but has not yet
3419 * necessarily been passed to the true reader. The sender is not free to throw
3420 * the packet away, as it might still get dropped by the peer before it is
3421 * delivered to its destination process.
3422 * \li short length - Length in bytes of the user data section.
3423 * \li u char packetType - The type of Rx packet described by this record. The
3424 * set of legal choices is available in Section 5.2.11.
3425 * \li struct clock retryTime - The time when this packet should be
3426 * retransmitted next.
3427 * \li struct clock timeSent - The last time this packet was transmitted.
3428 * \li struct rx header header - A copy of the internal Rx packet header.
3429 * \li wire - The text of the packet as it appears on the wire. This structure
3430 * has the following sub-fields:
3431 * \li u long head[RX HEADER SIZE/sizeof(long)] The wire-level contents of
3432 * IP, UDP, and Rx headers.
3433 * \li u long data[RX MAX PACKET DATA SIZE/sizeof(long)] The wire form of
3434 * the packet's "payload", namely the user data it carries.
3436 * \subsubsection sec5-3-3-3 Section 5.3.3.3: struct rx ackPacket
3439 * This is the format for the data portion of an Rx acknowledgement packet,
3440 * used to inform a peer entity performing packet transmissions that a subset
3441 * of its packets has been properly received.
3444 * \li u short bufferSpace - Number of packet buffers available. Specifically,
3445 * the number of packet buffers that the ack packet's sender is willing to
3446 * provide for data on this or subsequent calls. This number does not have to
3447 * fully accurate; it is acceptable for the sender to provide an estimate.
3448 * \li u short maxSkew - The maximum difference seen between the serial number
3449 * of the packet being acknowledged and highest packet yet received. This is an
3450 * indication of the degree to which packets are arriving out of order at the
3452 * \li u long firstPacket - The serial number of the first packet in the list
3453 * of acknowledged packets, as represented by the acks field below.
3454 * \li u long previousPacket - The previous packet serial number received.
3455 * \li u long serial - The serial number of the packet prompted the
3457 * \li u char reason - The reason given for the acknowledgement; legal values
3458 * for this field are described in Section 5.2.13.
3459 * \li u char nAcks - Number of acknowledgements active in the acks array
3460 * immediately following.
3461 * \li u char acks[RX MAXACKS] - Up to RX MAXACKS packet acknowledgements. The
3462 * legal values for each slot in the acks array are described in Section
3463 * 5.2.14. Basically, these fields indicate either positive or negative
3467 * All packets with serial numbers prior to firstPacket are implicitly
3468 * acknowledged by this packet, indicating that they have been fully processed
3469 * by the receiver. Thus, the sender need no longer be concerned about them,
3470 * and may release all of the resources that they occupy. Packets with serial
3471 * numbers firstPacket + nAcks and higher are not acknowledged by this ack
3472 * packet. Packets with serial numbers in the range [firstPacket, firstPacket +
3473 * nAcks) are explicitly acknowledged, yet their sender-side resources must not
3474 * yet be released, as there is yet no guarantee that the receiver will not
3475 * throw them away before they can be processed there.
3477 * There are some details of importance to be noted. For one, receiving a
3478 * positive acknowlegement via the acks array does not imply that the
3479 * associated packet is immune from being dropped before it is read and
3480 * processed by the receiving entity. It does, however, imply that the sender
3481 * should stop retransmitting the packet until further notice. Also, arrival of
3482 * an ack packet should prompt the transmitter to immediately retransmit all
3483 * packets it holds that have not been explicitly acknowledged and that were
3484 * last transmitted with a serial number less than the highest serial number
3485 * acknowledged by the acks array.
3486 * Note: The fields in this structure are always kept in wire format, namely in
3487 * network byte order.
3489 * \subsection sec5-3-4 Section 5.3.4: Debugging and Statistics
3492 * The following structures are defined in support of the debugging and
3493 * statistics-gathering interfaces provided by Rx.
3495 * \subsubsection sec5-3-4-1 Section 5.3.4.1: struct rx stats
3498 * This structure maintains Rx statistics, and is gathered by such tools as the
3499 * rxdebug program. It must be possible for all of the fields placed in this
3500 * structure to be successfully converted from their on-wire network byte
3501 * orderings to the host-specific ordering.
3504 * \li int packetRequests - Number of packet allocation requests processed.
3505 * \li int noPackets[RX N PACKET CLASSES] - Number of failed packet requests,
3506 * organized per allocation class.
3507 * \li int socketGreedy - Whether the SO GREEDY setting succeeded for the Rx
3509 * \li int bogusPacketOnRead - Number of inappropriately short packets
3511 * \li int bogusHost - Contains the host address from the last bogus packet
3513 * \li int noPacketOnRead - Number of attempts to read a packet off the wire
3514 * when there was actually no packet there.
3515 * \li int noPacketBuffersOnRead - Number of dropped data packets due to lack
3516 * of packet buffers.
3517 * \li int selects - Number of selects waiting for a packet arrival or a
3519 * \li int sendSelects - Number of selects forced when sending packets.
3520 * \li int packetsRead[RX N PACKET TYPES] - Total number of packets read,
3521 * classified by type.
3522 * \li int dataPacketsRead - Number of unique data packets read off the wire.
3523 * \li int ackPacketsRead - Number of ack packets read.
3524 * \li int dupPacketsRead - Number of duplicate data packets read.
3525 * \li int spuriousPacketsRead - Number of inappropriate data packets.
3526 * \li int packetsSent[RX N PACKET TYPES] - Number of packet transmissions,
3527 * broken down by packet type.
3528 * \li int ackPacketsSent - Number of ack packets sent.
3529 * \li int pingPacketsSent - Number of ping packets sent.
3530 * \li int abortPacketsSent - Number of abort packets sent.
3531 * \li int busyPacketsSent - Number of busy packets sent.
3532 * \li int dataPacketsSent - Number of unique data packets sent.
3533 * \li int dataPacketsReSent - Number of retransmissions.
3534 * \li int dataPacketsPushed - Number of retransmissions pushed early by a
3535 * negative acknowledgement.
3536 * \li int ignoreAckedPacket - Number of packets not retransmitted because they
3537 * have already been acked.
3538 * \li int struct clock totalRtt - Total round trip time measured for packets,
3539 * used to compute average time figure.
3540 * \li struct clock minRtt - Minimum round trip time measured for packets.
3541 * struct clock maxRtt - Maximum round trip time measured for packets.
3542 * \li int nRttSamples - Number of round trip samples.
3543 * \li int nServerConns - Number of server connections.
3544 * \li int nClientConns - Number of client connections.
3545 * \li int nPeerStructs - Number of peer structures.
3546 * \li int nCallStructs - Number of call structures physically allocated (using
3547 * the internal storage allocator routine).
3548 * \li int nFreeCallStructs - Number of call structures which were pulled from
3549 * the free queue, thus avoiding a call to the internal storage allocator
3551 * \li int spares[10] - Ten integer spare fields, reserved for future use.
3553 * \subsubsection sec5-3-4-2 Section 5.3.4.2: struct rx debugIn
3556 * This structure defines the data format for a packet requesting one of the
3557 * statistics collections maintained by Rx.
3560 * \li long type - The specific data collection that the caller desires. Legal
3561 * settings for this field are described in Section 5.2.16.2.
3562 * \li long index - This field is only used when gathering information on Rx
3563 * connections. Choose the index of the server-side connection record of which
3564 * we are inquiring. This field may be used as an iterator, stepping through
3565 * all the connection records, one per debugging request, until they have all
3568 * \subsubsection sec5-3-4-3 Section 5.3.4.3: struct rx debugStats
3571 * This structure describes the data format for a reply to an RX DEBUGI
3572 * GETSTATS debugging request packet. These fields are given values indicating
3573 * the current state of the Rx facility.
3576 * \li long nFreePackets - Number of packet buffers currently assigned to the
3578 * \li long packetReclaims - Currently unused.
3579 * \li long callsExecuted - Number of calls executed since the Rx facility was
3581 * \li char waitingForPackets - Is Rx currently blocked waiting for a packet
3582 * buffer to come free?
3583 * \li char usedFDs - If the Rx facility is executing in the kernel, return the
3584 * number of unix file descriptors in use. This number is not directly related
3585 * to the Rx package, but rather describes the state of the machine on which Rx
3587 * \li char version - Version number of the debugging package.
3588 * \li char spare1[1] - Byte spare, reserved for future use.
3589 * \li long spare2[10] - Set of 10 longword spares, reserved for future use.
3591 * \subsubsection sec5-3-4-4 Section 5.3.4.4: struct rx debugConn
3594 * This structure defines the data format returned when a caller requests
3595 * information concerning an Rx connection. Thus, rx debugConn defines the
3596 * external packaging of interest to external parties. Most of these fields are
3597 * set from the rx connection structure, as defined in Section 5.3.2.2, and
3598 * others are obtained by indirecting through such objects as the connection's
3599 * peer and call structures.
3602 * \li long host - Address of the host identified by the connection's peer
3604 * \li long cid - The connection ID.
3605 * \li long serial - The serial number of the next outgoing packet associated
3606 * with this connection.
3607 * \li long callNumber[RX MAXCALLS] - The current call numbers for the
3608 * individual call channels on this connection.
3609 * \li long error - Records the latest error code for calls occurring on this
3611 * \li short port - UDP port associated with the connection's peer.
3612 * \li char flags - State of the connection; see Section 5.2.4 for individual
3614 * \li char type - Whether the connection is a server-side or client-side one.
3615 * See Section 5.2.5 for individual bit definitions.
3616 * \li char securityIndex - Index in the associated server-side service class
3617 * of the security object being used by this call.
3618 * \li char sparec[3] - Used to force alignment for later fields.
3619 * \li char callState[RX MAXCALLS] - Current call state on each call channel.
3620 * The associated bit definitions appear in Section 5.2.7.
3621 * \li char callMode[RX MAXCALLS] - Current mode of all call channels that are
3622 * in RX STATE ACTIVE state. The associated bit definitions appear in Section
3624 * \li char callFlags[RX MAXCALLS] - Flags pertaining to the state of each of
3625 * the connection's call channels. The associated bit definitions appear in
3627 * \li char callOther[RX MAXCALLS] - Flag field for each call channel, where
3628 * the presence of the RX OTHER IN flag indicates that there are packets
3629 * present on the given call's reception queue, and the RX OTHER OUT flag
3630 * indicates the presence of packets on the transmission queue.
3631 * \li struct rx securityObjectStats secStats - The contents of the statistics
3632 * related to the security object selected by the securityIndex field, if any.
3633 * \li long epoch - The connection's client-side incarnation time.
3634 * \li long sparel[10] - A set of 10 longword fields, reserved for future use.
3636 * \subsubsection sec5-3-4-5 Section 5.3.4.5: struct rx debugConn vL
3639 * This structure is identical to rx debugConn defined above, except for the
3640 * fact that it is missing the sparec field. This sparec field is used in rx
3641 * debugConn to fix an alignment problem that was discovered in version L of
3642 * the debugging/statistics interface (hence the trailing "tt vL tag in the
3643 * structure name). This alignment problem is fixed in version M, which
3644 * utilizes and exports the rx debugConn structure exclusively. Information
3645 * regarding the range of version-numbering values for the Rx
3646 * debugging/statistics interface may be found in Section 5.2.16.1.
3647 * \section sec5-4 Section 5.4: Exported Variables
3650 * This section describes the set of variables that the Rx facility exports to
3651 * its applications. Some of these variables have macros defined for the sole
3652 * purpose of providing the caller with a convenient way to manipulate them.
3653 * Note that some of these exported variables are never meant to be altered by
3654 * application code (e.g., rx nPackets).
3656 * \subsection sec5-4-1 Section 5.4.1: rx connDeadTime
3659 * This integer-valued variable determines the maximum number of seconds that a
3660 * connection may remain completely inactive, without receiving packets of any
3661 * kind, before it is eligible for garbage collection. Its initial value is 12
3662 * seconds. The rx SetRxDeadTime macro sets the value of this variable.
3664 * \subsection sec5-4-2 Section 5.4.2: rx idleConnectionTime
3667 * This integer-valued variable determines the maximum number of seconds that a
3668 * server connection may "idle" (i.e., not have any active calls and otherwise
3669 * not have sent a packet) before becoming eligible for garbage collection. Its
3670 * initial value is 60 seconds.
3672 * \subsection sec5-4-3 Section 5.4.3: rx idlePeerTime
3675 * This integer-valued variable determines the maximum number of seconds that
3676 * an Rx peer structure is allowed to exist without any connection structures
3677 * referencing it before becoming eligible for garbage collection. Its initial
3678 * value is 60 seconds.
3680 * \subsection sec5-4-4 Section 5.4.4: rx extraQuota
3683 * This integer-valued variable is part of the Rx packet quota system (see
3684 * Section 1.2.6), which is used to avoid system deadlock. This ensures that
3685 * each server-side thread has a minimum number of packets at its disposal,
3686 * allowing it to continue making progress on active calls. This particular
3687 * variable records how many extra data packets a user has requested be
3688 * allocated. Its initial value is 0.
3690 * \subsection sec5-4-5 Section 5.4.5: rx extraPackets
3693 * This integer-valued variable records how many additional packet buffers are
3694 * to be created for each Rx server thread. The caller, upon setting this
3695 * variable, is applying some application-specific knowledge of the level of
3696 * network activity expected. The rx extraPackets variable is used to compute
3697 * the overall number of packet buffers to reserve per server thread, namely rx
3698 * nPackets, described below. The initial value is 32 packets.
3700 * \subsection sec5-4-6 Section 5.4.6: rx nPackets
3703 * This integer-valued variable records the total number of packet buffers to
3704 * be allocated per Rx server thread. It takes into account the quota packet
3705 * buffers and the extra buffers requested by the caller, if any.
3706 * \note This variable should never be set directly; the Rx facility itself
3707 * computes its value. Setting it incorrectly may result in the service
3708 * becoming deadlocked due to insufficient resources. Callers wishing to
3709 * allocate more packet buffers to their server threads should indicate that
3710 * desire by setting the rx extraPackets variable described above.
3712 * \subsection sec5-4-7 Section 5.4.7: rx nFreePackets
3715 * This integer-valued variable records the number of Rx packet buffers not
3716 * currently used by any call. These unused buffers are collected into a free
3719 * \subsection sec5-4-8 Section 5.4.8: rx stackSize
3722 * This integer-valued variable records the size in bytes for the lightweight
3723 * process stack. The variable is initially set to RX DEFAULT STACK SIZE, and
3724 * is typically manipulated via the rx SetStackSize() macro.
3726 * \subsection sec5-4-9 Section 5.4.9: rx packetTypes
3729 * This variable holds an array of string names used to describe the different
3730 * roles for Rx packets. Its value is derived from the RX PACKET TYPES
3731 * definition found in Section 5.2.11.
3733 * \subsection sec5-4-10 Section 5.4.10: rx stats
3736 * This variable contains the statistics structure that keeps track of Rx
3737 * statistics. The struct rx stats structure it provides is defined in Section
3740 * \section sec5-5 Section 5.5: Macros
3743 * Rx uses many macro definitions in preference to calling C functions
3744 * directly. There are two main reasons for doing this:
3745 * \li field selection: Many Rx operations are easily realized by returning the
3746 * value of a particular structure's field. It is wasteful to invoke a C
3747 * routine to simply fetch a structure's field, incurring unnecessary function
3748 * call overhead. Yet, a convenient, procedure-oriented operation is still
3749 * provided to Rx clients for such operations by the use of macros. For
3750 * example, the rx ConnectionOf() macro, described in Section 5.5.1.1, simply
3751 * indirects through the Rx call structure pointer parameter to deliver the
3753 * \li Performance optimization: In some cases, a simple test or operation can
3754 * be performed to accomplish a particular task. When this simple,
3755 * straightforward operation fails, then a true C routine may be called to
3756 * handle to more complex (and rarer) situation. The Rx macro rx Write(),
3757 * described in Section 5.5.6.2, is a perfect example of this type of
3758 * optimization. Invoking rx Write() first checks to determine whether or not
3759 * the outgoing call's internal buffer has enough room to accept the specified
3760 * data bytes. If so, it copies them into the call's buffer, updating counts
3761 * and pointers as appropriate. Otherwise, rx Write() calls the rx WriteProc()
3762 * to do the work, which in this more complicated case involves packet
3763 * manipulations, dispatches, and allocations. The result is that the common,
3764 * simple cases are often handled in-line, with more complex (and rarer) cases
3765 * handled through true function invocations.
3767 * The set of Rx macros is described according to the following categories.
3768 * \li field selections/assignments
3769 * \li Boolean operations
3770 * \li Service attributes
3771 * \li Security-related operations
3772 * \li Sizing operations
3773 * \li Complex operation
3774 * \li Security operation invocations
3776 * \subsection sec5-5-1 Section 5.5.1: field Selections/Assignments
3779 * These macros facilitate the fetching and setting of fields from the
3780 * structures described Chapter 5.3.
3782 * \subsubsection sec5-5-1-1 Section 5.5.1.1: rx ConnectionOf()
3785 * \#define rx_ConnectionOf(call) ((call)->conn)
3787 * Generate a reference to the connection field within the given Rx call
3788 * structure. The value supplied as the call argument must resolve into an
3789 * object of type (struct rx call *). An application of the rx ConnectionOf()
3790 * macro itself yields an object of type rx peer.
3792 * \subsubsection sec5-5-1-2 Section 5.5.1.2: rx PeerOf()
3795 * \#define rx_PeerOf(conn) ((conn)->peer)
3797 * Generate a reference to the peer field within the given Rx call structure.
3798 * The value supplied as the conn argument must resolve into an object of type
3799 * (struct rx connection *). An instance of the rx PeerOf() macro itself
3800 * resolves into an object of type rx peer.
3802 * \subsubsection sec5-5-1-3 Section 5.5.1.3: rx HostOf()
3805 * \#define rx_HostOf(peer) ((peer)->host)
3807 * Generate a reference to the host field within the given Rx peer structure.
3808 * The value supplied as the peer argument must resolve into an object of type
3809 * (struct rx peer *). An instance of the rx HostOf() macro itself resolves
3810 * into an object of type u long.
3812 * \subsubsection sec5-5-1-4 Section 5.5.1.4: rx PortOf()
3815 * \#define rx_PortOf(peer) ((peer)->port)
3817 * Generate a reference to the port field within the given Rx peer structure.
3818 * The value supplied as the peer argument must resolve into an object of type
3819 * (struct rx peer *). An instance of the rx PortOf() macro itself resolves
3820 * into an object of type u short.
3822 * \subsubsection sec5-5-1-5 Section 5.5.1.5: rx GetLocalStatus()
3825 * \#define rx_GetLocalStatus(call, status) ((call)->localStatus)
3827 * Generate a reference to the localStatus field, which specifies the local
3828 * user status sent out of band, within the given Rx call structure. The value
3829 * supplied as the call argument must resolve into an object of type (struct rx
3830 * call *). The second argument, status, is not used. An instance of the rx
3831 * GetLocalStatus() macro itself resolves into an object of type u char.
3833 * \subsubsection sec5-5-1-6 Section 5.5.1.6: rx SetLocalStatus()
3836 * \#define rx_SetLocalStatus(call, status) ((call)->localStatus = (status))
3838 * Assign the contents of the localStatus field, which specifies the local user
3839 * status sent out of band, within the given Rx call structure. The value
3840 * supplied as the call argument must resolve into an object of type (struct rx
3841 * call *). The second argument, status, provides the new value of the
3842 * localStatus field, and must resolve into an object of type u char. An
3843 * instance of the rx GetLocalStatus() macro itself resolves into an object
3844 * resulting from the assignment, namely the u char status parameter.
3846 * \subsubsection sec5-5-1-7 Section 5.5.1.7: rx GetRemoteStatus()
3849 * \#define rx_GetRemoteStatus(call) ((call)->remoteStatus)
3851 * Generate a reference to the remoteStatus field, which specifies the remote
3852 * user status received out of band, within the given Rx call structure. The
3853 * value supplied as the call argument must resolve into an object of type
3854 * (struct rx call *). An instance of the rx GetRemoteStatus() macro itself
3855 * resolves into an object of type u char.
3857 * \subsubsection sec5-5-1-8 Section 5.5.1.8: rx Error()
3860 * \#define rx_Error(call) ((call)->error)
3862 * Generate a reference to the error field, which specifies the current error
3863 * condition, within the given Rx call structure. The value supplied as the
3864 * call argument must resolve into an object of type (struct rx call *). An
3865 * instance of the rx Error() macro itself resolves into an object of type
3868 * \subsubsection sec5-5-1-9 Section 5.5.1.9: rx DataOf()
3871 * \#define rx_DataOf(packet) ((char *) (packet)->wire.data)
3873 * Generate a reference to the beginning of the data portion within the given
3874 * Rx packet as it appears on the wire. Any encryption headers will be resident
3875 * at this address. For Rx packets of type RX PACKET TYPE DATA, the actual user
3876 * data will appear at the address returned by the rx DataOf macro plus the
3877 * connection's security header size. The value supplied as the packet argument
3878 * must resolve into an object of type (struct rx packet *). An instance of the
3879 * rx DataOf() macro itself resolves into an object of type (u long *).
3881 * \subsubsection sec5-5-1-10 Section 5.5.1.10: rx GetDataSize()
3884 * \#define rx_GetDataSize(packet) ((packet)->length)
3886 * Generate a reference to the length field, which specifies the number of
3887 * bytes of user data contained within the wire form of the packet, within the
3888 * given Rx packet description structure. The value supplied as the packet
3889 * argument must resolve into an object of type (struct rx packet *). An
3890 * instance of the rx GetDataSize() macro itself resolves into an object of
3893 * \subsubsection sec5-5-1-11 Section 5.5.1.11: rx SetDataSize()
3896 * \#define rx_SetDataSize(packet, size) ((packet)->length = (size))
3898 * Assign the contents of the length field, which specifies the number of bytes
3899 * of user data contained within the wire form of the packet, within the given
3900 * Rx packet description structure. The value supplied as the packet argument
3901 * must resolve into an object of type (struct rx packet *). The second
3902 * argument, size, provides the new value of the length field, and must resolve
3903 * into an object of type short. An instance of the rx SetDataSize() macro
3904 * itself resolves into an object resulting from the assignment, namely the
3905 * short length parameter.
3907 * \subsubsection sec5-5-1-12 Section 5.5.1.12: rx GetPacketCksum()
3910 * \#define rx_GetPacketCksum(packet) ((packet)->header.spare)
3912 * Generate a reference to the header checksum field, as used by the built-in
3913 * rxkad security module (See Chapter 3), within the given Rx packet
3914 * description structure. The value supplied as the packet argument must
3915 * resolve into an object of type (struct rx packet *). An instance of the rx
3916 * GetPacketCksum() macro itself resolves into an object of type u short.
3918 * \subsubsection sec5-5-1-13 Section 5.5.1.13: rx SetPacketCksum()
3921 * \#define rx_SetPacketCksum(packet, cksum) ((packet)->header.spare = (cksum))
3923 * Assign the contents of the header checksum field, as used by the built-in
3924 * rxkad security module (See Chapter 3), within the given Rx packet
3925 * description structure. The value supplied as the packet argument must
3926 * resolve into an object of type (struct rx packet *). The second argument,
3927 * cksum, provides the new value of the checksum, and must resolve into an
3928 * object of type u short. An instance of the rx SetPacketCksum() macro itself
3929 * resolves into an object resulting from the assignment, namely the u short
3930 * checksum parameter.
3932 * \subsubsection sec5-5-1-14 Section 5.5.1.14: rx GetRock()
3935 * \#define rx_GetRock(obj, type) ((type)(obj)->rock)
3937 * Generate a reference to the field named rock within the object identified by
3938 * the obj pointer. One common Rx structure to which this macro may be applied
3939 * is struct rx connection. The specified rock field is casted to the value of
3940 * the type parameter, which is the overall value of the rx GetRock() macro.
3942 * \subsubsection sec5-5-1-15 Section 5.5.1.15: rx SetRock()
3945 * \#define rx_SetRock(obj, newrock) ((obj)->rock = (VOID *)(newrock))
3947 * Assign the contents of the newrock parameter into the rock field of the
3948 * object pointed to by obj. The given object's rock field must be of type
3949 * (VOID *). An instance of the rx SetRock() macro itself resolves into an
3950 * object resulting from the assignment and is of type (VOID *).
3952 * \subsubsection sec5-5-1-16 Section 5.5.1.16: rx SecurityClassOf()
3955 * \#define rx_SecurityClassOf(conn) ((conn)->securityIndex)
3957 * Generate a reference to the security index field of the given Rx connection
3958 * description structure. This identifies the security class used by the
3959 * connection. The value supplied as the conn argument must resolve into an
3960 * object of type (struct rx connection *). An instance of the rx
3961 * SecurityClassOf() macro itself resolves into an object of type u char.
3963 * \subsubsection sec5-5-1-17 Section 5.5.1.17: rx SecurityObjectOf()
3966 * \#define rx_SecurityObjectOf(conn) ((conn)->securityObject)
3968 * Generate a reference to the security object in use by the given Rx
3969 * connection description structure. The choice of security object determines
3970 * the authentication protocol enforced by the connection. The value supplied
3971 * as the conn argument must resolve into an object of type (struct rx
3972 * connection *). An instance of the rx SecurityObjectOf() macro itself
3973 * resolves into an object of type (struct rx securityClass *).
3975 * \subsection sec5-5-2 Section 5.5.2: Boolean Operations
3978 * The macros described in this section all return Boolean values. They are
3979 * used to query such things as the whether a connection is a server-side or
3980 * client-side one and if extra levels of checksumming are being used in Rx
3983 * \subsubsection sec5-5-2-1 Section 5.5.2.1: rx IsServerConn()
3986 * \#define rx_IsServerConn(conn) ((conn)->type == RX_SERVER_CONNECTION)
3988 * Determine whether or not the Rx connection specified by the conn argument is
3989 * a server-side connection. The value supplied for conn must resolve to an
3990 * object of type struct rx connection. The result is determined by testing
3991 * whether or not the connection's type field is set to RX SERVER CONNECTION.
3992 * \note Another macro, rx ServerConn(), performs the identical operation.
3994 * \subsubsection sec5-5-2-2 Section 5.5.2.2: rx IsClientConn()
3997 * \#define rx_IsClientConn(conn) ((conn)->type == RX_CLIENT_CONNECTION)
3999 * Determine whether or not the Rx connection specified by the conn argument is
4000 * a client-side connection. The value supplied for conn must resolve to an
4001 * object of type struct rx connection. The result is determined by testing
4002 * whether or not the connection's type field is set to RX CLIENT CONNECTION.
4003 * \note Another macro, rx ClientConn(), performs the identical operation.
4005 * \subsubsection sec5-5-2-3 Section 5.5.2.2: rx IsUsingPktCksum()
4008 * \#define rx_IsUsingPktCksum(conn) ((conn)->flags &
4009 * RX_CONN_USING_PACKET_CKSUM)
4011 * Determine whether or not the Rx connection specified by the conn argument is
4012 * checksum-ming the headers of all packets on its calls. The value supplied
4013 * for conn must resolve to an object of type struct rx connection. The result
4014 * is determined by testing whether or not the connection's flags field has the
4015 * RX CONN USING PACKET CKSUM bit enabled.
4017 * \subsection sec5-5-3 Section 5.5.3: Service Attributes
4020 * This section describes user-callable macros that manipulate the attributes
4021 * of an Rx service. Note that these macros must be called (and hence their
4022 * operations performed) before the given service is installed via the
4023 * appropriate invocation of the associated rx StartServer() function.
4025 * \subsubsection sec5-5-3-1 Section 5.5.3.1: rx SetStackSize()
4028 * rx_stackSize = (((stackSize) stackSize) > rx_stackSize) ? stackSize :
4031 * Inform the Rx facility of the stack size in bytes for a class of threads to
4032 * be created in support of Rx services. The exported rx stackSize variable
4033 * tracks the high-water mark for all stack size requests before the call to rx
4034 * StartServer(). If no calls to rx SetStackSize() are made, then rx stackSize
4035 * will retain its default setting of RX DEFAULT STACK SIZE.
4037 * In this macro, the first argument is not used. It was originally intended
4038 * that thread stack sizes would be settable on a per-service basis. However,
4039 * calls to rx SetStackSize() will ignore the service parameter and set the
4040 * high-water mark for all Rx threads created after the use of rx
4041 * SetStackSize(). The second argument, stackSize, specifies determines the new
4042 * stack size, and should resolve to an object of type int. The value placed in
4043 * the stackSize parameter will not be recorded in the global rx stackSize
4044 * variable unless it is greater than the variable's current setting.
4046 * An instance of the rx SetStackSize() macro itself resolves into the result
4047 * of the assignment, which is an object of type int.
4049 * \subsubsection sec5-5-3-2 Section 5.5.3.2: rx SetMinProcs()
4052 * \#define rx_SetMinProcs(service, min) ((service)->minProcs = (min))
4054 * Choose min as the minimum number of threads guaranteed to be available for
4055 * parallel execution of the given Rx service. The service parameter should
4056 * resolve to an object of type struct rx service. The min parameter should
4057 * resolve to an object of type short. An instance of the rx SetMinProcs()
4058 * macro itself resolves into the result of the assignment, which is an object
4061 * \subsubsection sec5-5-3-3 Section 5.5.3.3: rx SetMaxProcs()
4064 * \#define rx_SetMaxProcs(service, max) ((service)->maxProcs = (max))
4066 * Limit the maximum number of threads that may be made available to the given
4067 * Rx service for parallel execution to be max. The service parameter should
4068 * resolve to an object of type struct rx service. The max parameter should
4069 * resolve to an object of type short. An instance of the rx SetMaxProcs()
4070 * macro itself resolves into the result of the assignment, which is an object
4073 * \subsubsection sec5-5-3-4 Section 5.5.3.4: rx SetIdleDeadTime()
4076 * \#define rx_SetIdleDeadTime(service, time) ((service)->idleDeadTime =
4079 * Every Rx service has a maximum amount of time it is willing to have its
4080 * active calls sit idle (i.e., no new data is read or written for a call
4081 * marked as RX STATE ACTIVE) before unilaterally shutting down the call. The
4082 * expired call will have its error field set to RX CALL TIMEOUT. The operative
4083 * assumption in this situation is that the client code is exhibiting a
4084 * protocol error that prevents progress from being made on this call, and thus
4085 * the call's resources on the server side should be freed. The default value,
4086 * as recorded in the service's idleDeadTime field, is set at service creation
4087 * time to be 60 seconds. The rx SetIdleTime() macro allows a caller to
4088 * dynamically set this idle call timeout value.
4090 * The service parameter should resolve to an object of type struct rx service.
4091 * Also, the time parameter should resolve to an object of type short. finally,
4092 * an instance of the rx SetIdleDeadTime() macro itself resolves into the
4093 * result of the assignment, which is an object of type short.
4095 * \subsubsection sec5-5-3-5 Section 5.5.3.5: rx SetServiceDeadTime()
4098 * \#define rx_SetServiceDeadTime(service, seconds)
4099 * ((service)->secondsUntilDead = (seconds))
4100 * \note This macro definition is obsolete and should NOT be used. Including it
4101 * in application code will generate a compile-time error, since the service
4102 * structure no longer has such a field defined.
4104 * See the description of the rx SetConnDeadTime() macro below to see how hard
4105 * timeouts may be set for situations of complete call inactivity.
4107 * \subsubsection sec5-5-3-6 Section 5.5.3.6: rx SetRxDeadTime()
4110 * \#define rx_SetRxDeadTime(seconds) (rx_connDeadTime = (seconds))
4112 * Inform the Rx facility of the maximum number of seconds of complete
4113 * inactivity that will be tolerated on an active call. The exported rx
4114 * connDeadTime variable tracks this value, and is initialized to a value of 12
4115 * seconds. The current value of rx connDeadTime will be copied into new Rx
4116 * service and connection records upon their creation.
4118 * The seconds argument determines the value of rx connDeadTime, and should
4119 * resolve to an object of type int. An instance of the rx SetRxDeadTime()
4120 * macro itself resolves into the result of the assignment, which is an object
4123 * \subsubsection sec5-5-3-7 Section 5.5.3.7: rx SetConnDeadTime()
4126 * \#define rx_SetConnDeadTime(conn, seconds) (rxi_SetConnDeadTime(conn,
4129 * Every Rx connection has a maximum amount of time it is willing to have its
4130 * active calls on a server connection sit without receiving packets of any
4131 * kind from its peer. After such a quiescent time, during which neither data
4132 * packets (regardless of whether they are properly sequenced or duplicates)
4133 * nor keep-alive packets are received, the call's error field is set to RX
4134 * CALL DEAD and the call is terminated. The operative assumption in this
4135 * situation is that the client making the call has perished, and thus the
4136 * call's resources on the server side should be freed. The default value, as
4137 * recorded in the connection's secondsUntilDead field, is set at connection
4138 * creation time to be the same as its parent service. The rx SetConnDeadTime()
4139 * macro allows a caller to dynamically set this timeout value.
4141 * The conn parameter should resolve to an object of type struct rx connection.
4142 * Also, the seconds parameter should resolve to an object of type int.
4143 * finally, an instance of the rx SetConnDeadTime() macro itself resolves into
4144 * the a call to rxi SetConnDeadTime(), whose return value is void.
4146 * \subsubsection sec5-5-3-8 Section 5.5.3.8: rx SetConnHardDeadTime()
4149 * \#define rx_SetConnHardDeadTime(conn, seconds) ((conn)->hardDeadTime =
4152 * It is convenient to be able to specify that calls on certain Rx connections
4153 * have a hard absolute timeout. This guards against protocol errors not caught
4154 * by other checks in which one or both of the client and server are looping.
4155 * The rx SetConnHardDeadTime() macro is available for this purpose. It will
4156 * limit calls on the connection identified by the conn parameter to execution
4157 * times of no more than the given number of seconds. By default, active calls
4158 * on an Rx connection may proceed for an unbounded time, as long as they are
4159 * not totally quiescent (see Section 5.5.3.7 for a description of the rx
4160 * SetConnDeadTime()) or idle (see Section 5.5.3.4 for a description of the rx
4161 * SetIdleDeadTime()).
4163 * The conn parameter should resolve to an object of type (struct rx connection
4164 * *). The seconds parameter should resolve to an object of type u short. An
4165 * instance of the rx SetConnHardDeadTime() macro itself resolves into the
4166 * result of the assignment, which is an object of type u short.
4168 * \subsubsection sec5-5-3-9 Section 5.5.3.9: rx GetBeforeProc()
4171 * \#define rx_GetBeforeProc(service) ((service)->beforeProc)
4173 * Return a pointer of type (VOID *)() to the procedure associated with the
4174 * given Rx service that will be called immediately upon activation of a server
4175 * thread to handle an incoming call. The service parameter should resolve to
4176 * an object of type struct rx service.
4178 * When an Rx service is first created (via a call to the rx NewService()
4179 * function), its beforeProc field is set to a null pointer. See the
4180 * description of the rx SetBeforeProc() below.
4182 * \subsubsection sec5-5-3-10 Section 5.5.3.10: rx SetBeforeProc()
4185 * \#define rx_SetBeforeProc(service, proc) ((service)->beforeProc = (proc))
4187 * Instruct the Rx facility to call the procedure identified by the proc
4188 * parameter immediately upon activation of a server thread to handle an
4189 * incoming call. The specified procedure will be called with a single
4190 * parameter, a pointer of type struct rx call, identifying the call this
4191 * thread will now be responsible for handling. The value returned by the
4192 * procedure, if any, is discarded.
4194 * The service parameter should resolve to an object of type struct rx service.
4195 * The proc parameter should resolve to an object of type (VOID *)(). An
4196 * instance of the rx SetBeforeProc() macro itself resolves into the result of
4197 * the assignment, which is an object of type (VOID *)().
4199 * \subsubsection sec5-5-3-11 Section 5.5.3.11: rx GetAfterProc()
4202 * \#define rx_GetAfterProc(service) ((service)->afterProc)
4204 * Return a pointer of type (VOID *)() to the procedure associated with the
4205 * given Rx service that will be called immediately upon completion of the
4206 * particular Rx call for which a server thread was activated. The service
4207 * parameter should resolve to an object of type struct rx service.
4209 * When an Rx service is first created (via a call to the rx NewService()
4210 * function), its afterProc field is set to a null pointer. See the description
4211 * of the rx SetAfterProc() below.
4213 * \subsubsection sec5-5-3-12 Section 5.5.3.12: rx SetAfterProc()
4216 * \#define rx_SetAfterProc(service, proc) ((service)->afterProc = (proc))
4218 * Instruct the Rx facility to call the procedure identified by the proc
4219 * parameter immediately upon completion of the particular Rx call for which a
4220 * server thread was activated. The specified procedure will be called with a
4221 * single parameter, a pointer of type struct rx call, identifying the call
4222 * this thread just handled. The value returned by the procedure, if any, is
4225 * The service parameter should resolve to an object of type struct rx service.
4226 * The proc parameter should resolve to an object of type (VOID *)(). An
4227 * instance of the rx SetAfterProc() macro itself resolves into the result of
4228 * the assignment, which is an object of type (VOID *)().
4230 * \subsubsection sec5-5-3-13 Section 5.5.3.13: rx SetNewConnProc()
4233 * \#define rx_SetNewConnProc(service, proc) ((service)->newConnProc = (proc))
4235 * Instruct the Rx facility to call the procedure identified by the proc
4236 * parameter as the last step in the creation of a new Rx server-side
4237 * connection for the given service. The specified procedure will be called
4238 * with a single parameter, a pointer of type (struct rx connection *),
4239 * identifying the connection structure that was just built. The value returned
4240 * by the procedure, if any, is discarded.
4242 * The service parameter should resolve to an object of type struct rx service.
4243 * The proc parameter should resolve to an object of type (VOID *)(). An
4244 * instance of the rx SetNewConnProc() macro itself resolves into the result of
4245 * the assignment, which is an object of type (VOID *)().
4246 * \note There is no access counterpart defined for this macro, namely one that
4247 * returns the current setting of a service's newConnProc.
4249 * \subsubsection sec5-5-3-14 Section 5.5.3.14: rx SetDestroyConnProc()
4252 * \#define rx_SetDestroyConnProc(service, proc) ((service)->destroyConnProc =
4255 * Instruct the Rx facility to call the procedure identified by the proc
4256 * parameter just before a server connection associated with the given Rx
4257 * service is destroyed. The specified procedure will be called with a single
4258 * parameter, a pointer of type (struct rx connection *), identifying the
4259 * connection about to be destroyed. The value returned by the procedure, if
4260 * any, is discarded.
4262 * The service parameter should resolve to an object of type struct rx service.
4263 * The proc parameter should resolve to an object of type (VOID *)(). An
4264 * instance of the rx SetDestroyConnProc() macro itself resolves into the
4265 * result of the assignment, which is an object of type (VOID *)().
4266 * \note There is no access counterpart defined for this macro, namely one that
4267 * returns the current setting of a service's destroyConnProc.
4269 * \subsection sec5-5-4 Section 5.5.4: Security-Related Operations
4272 * The following macros are callable by Rx security modules, and assist in
4273 * getting and setting header and trailer lengths, setting actual packet size,
4274 * and finding the beginning of the security header (or data).
4276 * \subsubsection sec5-5-4-1 Section 5.5.4.1: rx GetSecurityHeaderSize()
4279 * \#define rx_GetSecurityHeaderSize(conn) ((conn)->securityHeaderSize)
4281 * Generate a reference to the field in an Rx connection structure that records
4282 * the length in bytes of the associated security module's packet header data.
4284 * The conn parameter should resolve to an object of type struct rx connection.
4285 * An instance of the rx GetSecurityHeaderSize() macro itself resolves into an
4286 * object of type u short.
4288 * \subsubsection sec5-5-4-2 Section 5.5.4.2: rx SetSecurityHeaderSize()
4291 * \#define rx_SetSecurityHeaderSize(conn, length) ((conn)->securityHeaderSize
4294 * Set the field in a connection structure that records the length in bytes of
4295 * the associated security module's packet header data.
4297 * The conn parameter should resolve to an object of type struct rx connection.
4298 * The length parameter should resolve to an object of type u short. An
4299 * instance of the rx SetSecurityHeaderSize() macro itself resolves into the
4300 * result of the assignment, which is an object of type u short.
4302 * \subsubsection sec5-5-4-3 Section 5.5.4.3: rx
4303 * GetSecurityMaxTrailerSize()
4306 * \#define rx_GetSecurityMaxTrailerSize(conn) ((conn)->securityMaxTrailerSize)
4308 * Generate a reference to the field in an Rx connection structure that records
4309 * the maximum length in bytes of the associated security module's packet
4312 * The conn parameter should resolve to an object of type struct rx connection.
4313 * An instance of the rx GetSecurityMaxTrailerSize() macro itself resolves into
4314 * an object of type u short.
4316 * \subsubsection sec5-5-4-4 Section 5.5.4.4: rx
4317 * SetSecurityMaxTrailerSize()
4320 * \#define rx_SetSecurityMaxTrailerSize(conn, length)
4321 * ((conn)->securityMaxTrailerSize = (length))
4323 * Set the field in a connection structure that records the maximum length in
4324 * bytes of the associated security module's packet trailer data.
4326 * The conn parameter should resolve to an object of type struct rx connection.
4327 * The length parameter should resolve to an object of type u short. An
4328 * instance of the rx SetSecurityHeaderSize() macro itself resolves into the
4329 * result of the assignment, which is an object of type u short.
4331 * \subsection sec5-5-5 Section 5.5.5: Sizing Operations
4334 * The macros described in this section assist the application programmer in
4335 * determining the sizes of the various Rx packet regions, as well as their
4336 * placement within a packet buffer.
4338 * \subsubsection sec5-5-5-1 Section 5.5.5.1: rx UserDataOf()
4341 * \#define rx_UserDataOf(conn, packet) (((char *) (packet)->wire.data) +
4342 * (conn)->securityHeaderSize)
4344 * Generate a pointer to the beginning of the actual user data in the given Rx
4345 * packet, that is associated with the connection described by the conn
4346 * pointer. User data appears immediately after the packet's security header
4347 * region, whose length is determined by the security module used by the
4348 * connection. The conn parameter should resolve to an object of type struct rx
4349 * connection. The packet parameter should resolve to an object of type struct
4350 * rx packet. An instance of the rx UserDataOf() macro itself resolves into an
4351 * object of type (char *).
4353 * \subsubsection sec5-5-5-2 Section 5.5.5.2: rx MaxUserDataSize()
4356 * \#define rx_MaxUserDataSize(conn)
4357 * \n ((conn)->peer->packetSize
4358 * \n -RX_HEADER_SIZE
4359 * \n -(conn)->securityHeaderSize
4360 * \n -(conn)->securityMaxTrailerSize)
4362 * Return the maximum number of user data bytes that may be carried by a packet
4363 * on the Rx connection described by the conn pointer. The overall packet size
4364 * is reduced by the IP, UDP, and Rx headers, as well as the header and trailer
4365 * areas required by the connection's security module.
4367 * The conn parameter should resolve to an object of type struct rx connection.
4368 * An instance of the rx MaxUserDataSize() macro itself resolves into the an
4369 * object of type (u short).
4371 * \subsection sec5-5-6 Section 5.5.6: Complex Operations
4374 * Two Rx macros are designed to handle potentially complex operations, namely
4375 * reading data from an active incoming call and writing data to an active
4376 * outgoing call. Each call structure has an internal buffer that is used to
4377 * collect and cache data traveling through the call. This buffer is used in
4378 * conjunction with reading or writing to the actual Rx packets traveling on
4379 * the wire in support of the call. The rx Read() and rx Write() macros allow
4380 * their caller to simply manipulate the internal data buffer associated with
4381 * the Rx call structures whenever possible, thus avoiding the overhead
4382 * associated with a function call. When buffers are either filled or drained
4383 * (depending on the direction of the data flow), these macros will then call
4384 * functions to handle the more complex cases of generating or receiving
4385 * packets in support of the operation.
4387 * \subsubsection sec5-5-6-1 Section 5.5.6.1: rx Read()
4390 * \#define rx_Read(call, buf, nbytes)
4391 * \n ((call)->nLeft > (nbytes) ?
4392 * \n bcopy((call)->bufPtr, (buf), (nbytes)),
4393 * \n (call)->nLeft -= (nbytes), (call)->bufPtr += (nbytes), (nbytes)
4394 * \n : rx_ReadProc((call), (buf), (nbytes)))
4396 * Read nbytes of data from the given Rx call into the buffer to which buf
4397 * points. If the call's internal buffer has at least nbytes bytes already
4398 * filled, then this is done in-line with a copy and some pointer and counter
4399 * updates within the call structure. If the call's internal buffer doesn't
4400 * have enough data to satisfy the request, then the rx ReadProc() function
4401 * will handle this more complex situation.
4403 * In either case, the rx Read() macro returns the number of bytes actually
4404 * read from the call, resolving to an object of type int. If rx Read() returns
4405 * fewer than nbytes bytes, the call status should be checked via the rx
4408 * \subsubsection sec5-5-6-2 Section 5.5.6.2: rx Write()
4411 * \#define rx_Write(call, buf, nbytes)
4412 * \n ((call)->nFree > (nbytes) ?
4413 * \n bcopy((buf), (call)->bufPtr, (nbytes)),
4414 * \n (call)->nFree -= (nbytes),
4415 * \n (call)->bufPtr += (nbytes), (nbytes)
4416 * \n : rx_WriteProc((call), (buf), (nbytes)))
4418 * Write nbytes of data from the buffer pointed to by buf into the given Rx
4419 * call. If the call's internal buffer has at least nbytes bytes free, then
4420 * this is done in-line with a copy and some pointer and counter updates within
4421 * the call structure. If the call's internal buffer doesn't have room, then
4422 * the rx WriteProc() function will handle this more complex situation.
4424 * In either case, the rx Write() macro returns the number of bytes actually
4425 * written to the call, resolving to an object of type int. If zero is
4426 * returned, the call status should be checked via the rx Error() macro.
4428 * \subsection sec5-5-7 Section 5.5.7: Security Operation Invocations
4431 * Every Rx security module is required to implement an identically-named set
4432 * of operations, through which the security mechanism it defines is invoked.
4433 * This characteristic interface is reminiscent of the vnode interface defined
4434 * and popularized for file systems by Sun Microsystems [4]. The structure
4435 * defining this function array is described in Section 5.3.1.1.
4437 * These security operations are part of the struct rx securityClass, which
4438 * keeps not only the ops array itself but also any private data they require
4439 * and a reference count. Every Rx service contains an array of these security
4440 * class objects, specifying the range of security mechanisms it is capable of
4441 * enforcing. Every Rx connection within a service is associated with exactly
4442 * one of that service's security objects, and every call issued on the
4443 * connection will execute the given security protocol.
4445 * The macros described below facilitate the execution of the security module
4446 * interface functions. They are covered in the same order they appear in the
4447 * struct rx securityOps declaration.
4449 * \subsubsection sec5-5-7-1 Section 5.5.7.1: RXS OP()
4452 * #if defined(__STDC__) && !defined(__HIGHC__)
4453 * #define RXS_OP(obj, op, args)
4454 * ((obj->ops->op_ ## op) ? (*(obj)->ops->op_ ## op)args : 0)
4456 * #define RXS_OP(obj, op, args)
4457 * ((obj->ops->op_op) ? (*(obj)->ops->op_op)args : 0)
4462 * The RXS OP macro represents the workhorse macro in this group, used by all
4463 * the others. It takes three arguments, the first of which is a pointer to the
4464 * security object to be referenced. This obj parameter must resolve to an
4465 * object of type (struct rx securityOps *). The second parameter identifies
4466 * the specific op to be performed on this security object. The actual text of
4467 * this op argument is used to name the desired opcode function. The third and
4468 * final argument, args, specifies the text of the argument list to be fed to
4469 * the chosen security function. Note that this argument must contain the
4470 * bracketing parentheses for the function call's arguments. In fact, note that
4471 * each of the security function access macros defined below provides the
4472 * enclosing parentheses to this third RXS OP() macro.
4474 * \subsubsection sec5-5-7-2 Section 5.5.7.1: RXS Close()
4477 * \#define RXS_Close(obj) RXS_OP(obj, Close, (obj))
4479 * This macro causes the execution of the interface routine occupying the op
4480 * Close() slot in the Rx security object identified by the obj pointer. This
4481 * interface function is invoked by Rx immediately before a security object is
4482 * discarded. Among the responsibilities of such a function might be
4483 * decrementing the object's refCount field, and thus perhaps freeing up any
4484 * space contained within the security object's private storage region,
4485 * referenced by the object's privateData field.
4487 * The obj parameter must resolve into an object of type (struct rx securityOps
4488 * *). In generating a call to the security object's op Close() routine, the
4489 * obj pointer is used as its single parameter. An invocation of the RXS
4490 * Close() macro results in a return value identical to that of the op Close()
4491 * routine, namely a value of type int.
4493 * \subsubsection sec5-5-7-3 Section 5.5.7.3: RXS NewConnection()
4496 * \#define RXS_NewConnection(obj, conn) RXS_OP(obj, NewConnection, (obj,
4499 * This macro causes the execution of the interface routine in the op
4500 * NewConnection() slot in the Rx security object identified by the obj
4501 * pointer. This interface function is invoked by Rx immediately after a
4502 * connection using the given security object is created. Among the
4503 * responsibilities of such a function might be incrementing the object's
4504 * refCount field, and setting any per-connection information based on the
4505 * associated security object's private storage region, as referenced by the
4506 * object's privateData field.
4508 * The obj parameter must resolve into an object of type (struct rx securityOps
4509 * *). The conn argument contains a pointer to the newly-created connection
4510 * structure, and must resolve into an object of type (struct rx connection *).
4512 * In generating a call to the routine located at the security object's op
4513 * NewConnection() slot, the obj and conn pointers are used as its two
4514 * parameters. An invocation of the RXS NewConnection() macro results in a
4515 * return value identical to that of the op NewConnection() routine, namely a
4516 * value of type int.
4518 * \subsubsection sec5-5-7-4 Section 5.5.7.4: RXS PreparePacket()
4521 * \#define RXS_PreparePacket(obj, call, packet)
4522 * \n RXS_OP(obj, PreparePacket, (obj, call, packet))
4524 * This macro causes the execution of the interface routine in the op
4525 * PreparePacket() slot in the Rx security object identified by the obj
4526 * pointer. This interface function is invoked by Rx each time it prepares an
4527 * outward-bound packet. Among the responsibilities of such a function might be
4528 * computing information to put into the packet's security header and/or
4531 * The obj parameter must resolve into an object of type (struct rx securityOps
4532 * *). The call argument contains a pointer to the Rx call to which the given
4533 * packet belongs, and must resolve to an object of type (struct rx call *).
4534 * The final argument, packet, contains a pointer to the packet itself. It
4535 * should resolve to an object of type (struct rx packet *).
4537 * In generating a call to the routine located at the security object's op
4538 * PreparePacket() slot, the obj, call, and packet pointers are used as its
4539 * three parameters. An invocation of the RXS PreparePacket() macro results in
4540 * a return value identical to that of the op PreparePacket() routine, namely a
4541 * value of type int.
4543 * \subsubsection sec5-5-7-5 Section 5.5.7.5: RXS SendPacket()
4546 * \#define RXS_SendPacket(obj, call, packet) RXS_OP(obj, SendPacket, (obj,
4549 * This macro causes the execution of the interface routine occupying the op
4550 * SendPacket() slot in the Rx security object identified by the obj pointer.
4551 * This interface function is invoked by Rx each time it physically transmits
4552 * an outward-bound packet. Among the responsibilities of such a function might
4553 * be recomputing information in the packet's security header and/or trailer.
4555 * The obj parameter must resolve into an object of type (struct rx securityOps
4556 * *). The call argument contains a pointer to the Rx call to which the given
4557 * packet belongs, and must resolve to an object of type (struct rx call *).
4558 * The final argument, packet, contains a pointer to the packet itself. It
4559 * should resolve to an object of type (struct rx packet *).
4561 * In generating a call to the routine located at the security object's op
4562 * SendPacket() slot, the obj, call, and packet pointers are used as its three
4563 * parameters. An invocation of the RXS SendPacket() macro results in a return
4564 * value identical to that of the op SendPacket() routine, namely a value of
4567 * \subsubsection sec5-5-7-6 Section 5.5.7.6: RXS CheckAuthentication()
4570 * \#define RXS_CheckAuthentication(obj, conn) RXS_OP(obj, CheckAuthentication,
4573 * This macro causes the execution of the interface routine in the op
4574 * CheckAuthentication() slot in the Rx security object identified by the obj
4575 * pointer. This interface function is invoked by Rx each time it needs to
4576 * check whether the given connection is one on which authenticated calls are
4577 * being performed. Specifically, a value of 0 is returned if authenticated
4578 * calls are not being executed on this connection, and a value of 1 is
4579 * returned if they are.
4581 * The obj parameter must resolve into an object of type (struct rx securityOps
4582 * *). The conn argument contains a pointer to the Rx connection checked as to
4583 * whether authentication is being performed, and must resolve to an object of
4584 * type (struct rx connection *).
4586 * In generating a call to the routine in the security object's op
4587 * CheckAuthentication() slot, the obj and conn pointers are used as its two
4588 * parameters. An invocation of the RXS CheckAuthentication() macro results in
4589 * a return value identical to that of the op CheckAuthentication() routine,
4590 * namely a value of type int.
4592 * \subsubsection sec5-5-7-7 Section 5.5.7.7: RXS CreateChallenge()
4595 * \#define RXS_CreateChallenge(obj, conn) RXS_OP(obj, CreateChallenge, (obj,
4598 * This macro causes the execution of the interface routine in the op
4599 * CreateChallenge() slot in the Rx security object identified by the obj
4600 * pointer. This interface function is invoked by Rx each time a challenge
4601 * event is constructed for a given connection. Among the responsibilities of
4602 * such a function might be marking the connection as temporarily
4603 * unauthenticated until the given challenge is successfully met.
4605 * The obj parameter must resolve into an object of type (struct rx securityOps
4606 * *). The conn argument contains a pointer to the Rx connection for which the
4607 * authentication challenge is being constructed, and must resolve to an object
4608 * of type (struct rx connection *).
4610 * In generating a call to the routine located at the security object's op
4611 * CreateChallenge() slot, the obj and conn pointers are used as its two
4612 * parameters. An invocation of the RXS CreateChallenge() macro results in a
4613 * return value identical to that of the op CreateChallenge() routine, namely a
4614 * value of type int.
4616 * \subsubsection sec5-5-7-8 Section 5.5.7.8: RXS GetChallenge()
4619 * \#define RXS_GetChallenge(obj, conn, packet) RXS_OP(obj, GetChallenge, (obj,
4622 * This macro causes the execution of the interface routine occupying the op
4623 * GetChallenge() slot in the Rx security object identified by the obj pointer.
4624 * This interface function is invoked by Rx each time a challenge packet is
4625 * constructed for a given connection. Among the responsibilities of such a
4626 * function might be constructing the appropriate challenge structures in the
4627 * area of packet dedicated to security matters.
4629 * The obj parameter must resolve into an object of type (struct rx securityOps
4630 * *). The conn argument contains a pointer to the Rx connection to which the
4631 * given challenge packet belongs, and must resolve to an object of type
4632 * (struct rx connection *). The final argument, packet, contains a pointer to
4633 * the challenge packet itself. It should resolve to an object of type (struct
4636 * In generating a call to the routine located at the security object's op
4637 * GetChallenge() slot, the obj, conn, and packet pointers are used as its
4638 * three parameters. An invocation of the RXS GetChallenge() macro results in a
4639 * return value identical to that of the op GetChallenge() routine, namely a
4640 * value of type int.
4642 * \subsubsection sec5-5-7-9 Section 5.5.7.9: RXS GetResponse()
4645 * \#define RXS_GetResponse(obj, conn, packet) RXS_OP(obj, GetResponse, (obj,
4648 * This macro causes the execution of the interface routine occupying the op
4649 * GetResponse() slot in the Rx security object identified by the obj pointer.
4650 * This interface function is invoked by Rx on the server side each time a
4651 * response to a challenge packet must be received.
4653 * The obj parameter must resolve into an object of type (struct rx securityOps
4654 * *). The conn argument contains a pointer to the Rx client connection that
4655 * must respond to the authentication challenge, and must resolve to a (struct
4656 * rx connection *) object. The final argument, packet, contains a pointer to
4657 * the packet to be built in response to the challenge. It should resolve to an
4658 * object of type (struct rx packet *).
4660 * In generating a call to the routine located at the security object's op
4661 * GetResponse() slot, the obj, conn, and packet pointers are used as its three
4662 * parameters. An invocation of the RXS GetResponse() macro results in a return
4663 * value identical to that of the op GetResponse() routine, namely a value of
4666 * \subsubsection sec5-5-7-10 Section 5.5.7.10: RXS CheckResponse()
4669 * \#define RXS_CheckResponse(obj, conn, packet) RXS_OP(obj, CheckResponse,
4670 * (obj, conn, packet))
4672 * This macro causes the execution of the interface routine in the op
4673 * CheckResponse() slot in the Rx security object identified by the obj
4674 * pointer. This interface function is invoked by Rx on the server side each
4675 * time a response to a challenge packet is received for a given connection.
4676 * The responsibilities of such a function might include verifying the
4677 * integrity of the response, pulling out the necessary security information
4678 * and storing that information within the affected connection, and otherwise
4679 * updating the state of the connection.
4681 * The obj parameter must resolve into an object of type (struct rx securityOps
4682 * *). The conn argument contains a pointer to the Rx server connection to
4683 * which the given challenge response is directed. This argument must resolve
4684 * to an object of type (struct rx connection *). The final argument, packet,
4685 * contains a pointer to the packet received in response to the challenge
4686 * itself. It should resolve to an object of type (struct rx packet *).
4688 * In generating a call to the routine located at the security object's op
4689 * CheckResponse() slot, the obj, conn, and packet pointers are ued as its
4690 * three parameters. An invocation of the RXS CheckResponse() macro results in
4691 * a return value identical to that of the op CheckResponse() routine, namely a
4692 * value of type int.
4694 * \subsubsection sec5-5-7-11 Section 5.5.7.11: RXS CheckPacket()
4697 * \#define RXS_CheckPacket(obj, call, packet) RXS_OP(obj, CheckPacket, (obj,
4700 * This macro causes the execution of the interface routine occupying the op
4701 * CheckPacket() slot in the Rx security object identified by the obj pointer.
4702 * This interface function is invoked by Rx each time a packet is received. The
4703 * responsibilities of such a function might include verifying the integrity of
4704 * given packet, detecting any unauthorized modifications or tampering.
4706 * The obj parameter must resolve into an object of type (struct rx securityOps
4707 * *). The conn argument contains a pointer to the Rx connection to which the
4708 * given challenge response is directed, and must resolve to an object of type
4709 * (struct rx connection *). The final argument, packet, contains a pointer to
4710 * the packet received in response to the challenge itself. It should resolve
4711 * to an object of type (struct rx packet *).
4713 * In generating a call to the routine located at the security object's op
4714 * CheckPacket() slot, the obj, conn, and packet pointers are used as its three
4715 * parameters. An invocation of the RXS CheckPacket() macro results in a return
4716 * value identical to that of the op CheckPacket() routine, namely a value of
4719 * Please note that any non-zero return will cause Rx to abort all calls on the
4720 * connection. Furthermore, the connection itself will be marked as being in
4721 * error in such a case, causing it to reject any further incoming packets.
4723 * \subsubsection sec5-5-7-12 Section 5.5.7.12: RXS DestroyConnection()
4726 * \#define RXS_DestroyConnection(obj, conn) RXS_OP(obj, DestroyConnection,
4729 * This macro causes the execution of the interface routine in the op
4730 * DestroyConnection() slot in the Rx security object identified by the obj
4731 * pointer. This interface function is invoked by Rx each time a connection
4732 * employing the given security object is being destroyed. The responsibilities
4733 * of such a function might include deleting any private data maintained by the
4734 * security module for this connection.
4736 * The obj parameter must resolve into an object of type (struct rx securityOps
4737 * *). The conn argument contains a pointer to the Rx connection being reaped,
4738 * and must resolve to a (struct rx connection *) object.
4740 * In generating a call to the routine located at the security object's op
4741 * DestroyConnection() slot, the obj and conn pointers are used as its two
4742 * parameters. An invocation of the RXS DestroyConnection() macro results in a
4743 * return value identical to that of the op DestroyConnection() routine, namely
4744 * a value of type int.
4746 * \subsubsection sec5-5-7-13 Section 5.5.7.13: RXS GetStats()
4749 * \#define RXS_GetStats(obj, conn, stats) RXS_OP(obj, GetStats, (obj, conn,
4752 * This macro causes the execution of the interface routine in the op
4753 * GetStats() slot in the Rx security object identified by the obj pointer.
4754 * This interface function is invoked by Rx each time current statistics
4755 * concerning the given security object are desired.
4757 * The obj parameter must resolve into an object of type (struct rx securityOps
4758 * *). The conn argument contains a pointer to the Rx connection using the
4759 * security object to be examined, and must resolve to an object of type
4760 * (struct rx connection *). The final argument, stats, contains a pointer to a
4761 * region to be filled with the desired statistics. It should resolve to an
4762 * object of type (struct rx securityObjectStats *).
4764 * In generating a call to the routine located at the security object's op
4765 * GetStats() slot, the obj, conn, and stats pointers are used as its three
4766 * parameters. An invocation of the RXS GetStats() macro results in a return
4767 * value identical to that of the op GetStats() routine, namely a value of type
4770 * \section sec5-6 Section 5.6: Functions
4773 * Rx exports a collection of functions that, in conjuction with the macros
4774 * explored in Section 5.5, allows its clients to set up and export services,
4775 * create and tear down connections to these services, and execute remote
4776 * procedure calls along these connections.
4778 * This paper employs two basic categorizations of these Rx routines. One set
4779 * of functions is meant to be called directly by clients of the facility, and
4780 * are referred to as the exported operations. The individual members of the
4781 * second set of functions are not meant to be called directly by Rx clients,
4782 * but rather are called by the collection of defined macros, so they must
4783 * still be lexically visible. These indirectly-executed routines are referred
4784 * to here as the semi-exported operations.
4786 * All Rx routines return zero upon success. The range of error codes employed
4787 * by Rx is defined in Section 5.2.15.
4789 * \subsection sec5-6-1 Section 5.6.1: Exported Operations
4791 * \subsection sec5-6-2 Section 5.6.2: rx Init _ Initialize Rx
4794 * int rx Init(IN int port)
4796 * Initialize the Rx facility. If a non-zero port number is provided, it
4797 * becomes the default port number for any service installed later. If 0 is
4798 * provided for the port, a random port will be chosen by the system. The rx
4799 * Init() function sets up internal tables and timers, along with starting up
4800 * the listener thread.
4802 * RX ADDRINUSE The port provided has already been taken.
4804 * \subsection sec5-6-3 Section 5.6.3: rx NewService _ Create and install
4808 * struct rx service *rx NewService(IN u short port; IN u short serviceId; IN
4809 * char *serviceName; IN struct rx securityClass **securityObjects; IN int
4810 * nSecurityObjects; IN long (*serviceProc)())
4812 * Create and advertise a new Rx service. A service is uniquely named by a UDP
4813 * port number plus a non-zero 16-bit serviceId on the given host. The port
4814 * argument may be set to zero if rx Init() was called with a non-zero port
4815 * number, in which case that original port will be used. A serviceName must
4816 * also be provided, to be used for identification purposes (e.g., the service
4817 * name might be used for probing for statistics). A pointer to an array of
4818 * nSecurityObjects security objects to be associated with the new service is
4819 * given in . securityObjects. The service's executeRequestProc() pointer is
4820 * set to serviceProc.
4822 * The function returns a pointer to a descriptor for the requested Rx service.
4823 * A null return value indicates that the new service could not be created.
4824 * Possible reasons include:
4825 * \li The serviceId parameter was found to be zero.
4826 * \li A port value of zero was specified at Rx initialization time (i.e., when
4827 * rx init() was called), requiring a non-zero value for the port parameter
4829 * \li Another Rx service is already using serviceId.
4830 * \li Rx has already created the maximum RX MAX SERVICES Rx services (see
4833 * (struct rx service *) NULL The new Rx service could not be created, due to
4834 * one of the errors listed above.
4836 * \subsection sec5-6-4 Section 5.6.4: rx NewConnection _ Create a new
4837 * connection to a given service
4840 * struct rx connection *rx NewConnection( IN u long shost, IN u short sport,
4841 * IN u short sservice, IN struct rx securityClass *securityObject, IN int
4842 * service SecurityIndex)
4844 * Create a new Rx client connection to service sservice on the host whose IP
4845 * address is contained in shost and to that host's sport UDP port. The
4846 * corresponding Rx service identifier is expected in sservice. The caller also
4847 * provides a pointer to the security object to use for the connection in
4848 * securityObject, along with that object's serviceSecurityIndex among the
4849 * security objects associated with service sservice via a previous rx
4850 * NewService() call (see Section 5.6.3).
4851 * \note It is permissible to provide a null value for the securityObject
4852 * parameter if the chosen serviceSecurityIndex is zero. This corresponds to
4853 * the pre-defined null security object, which does not engage in authorization
4854 * checking of any kind.
4856 * --- A pointer to an initialized Rx connection is always returned, unless osi
4857 * Panic() is called due to memory allocation failure.
4859 * \subsection sec5-6-5 Section 5.6.5: rx NewCall _ Start a new call on
4860 * the given connection
4863 * struct rx call *rx NewCall( IN struct rx connection *conn)
4865 * Start a new Rx remote procedure call on the connection specified by the conn
4866 * parameter. The existing call structures (up to RX MAXCALLS of them) are
4867 * examined in order. The first non-active call encountered (i.e., either
4868 * unused or whose call->state is RX STATE DALLY) will be appropriated and
4869 * reset if necessary. If all call structures are in active use, the RX CONN
4870 * MAKECALL WAITING flag is set in the conn->flags field, and the thread
4871 * handling this request will sleep until a call structure comes free. Once a
4872 * call structure has been reserved, the keep-alive protocol is enabled for it.
4874 * The state of the given connection determines the detailed behavior of the
4875 * function. The conn->timeout field specifies the absolute upper limit of the
4876 * number of seconds this particular call may be in operation. After this time
4877 * interval, calls to such routines as rx SendData() or rx ReadData() will fail
4878 * with an RX CALL TIMEOUT indication.
4880 * --- A pointer to an initialized Rx call is always returned, unless osi
4881 * Panic() is called due to memory allocation failure.
4883 * \subsection sec5-6-6 Section 5.6.6: rx EndCall _ Terminate the given
4888 * \param IN struct rx call *call,
4892 * Indicate that the Rx call described by the structure located at call is
4893 * finished, possibly prematurely. The value passed in the rc parameter is
4894 * returned to the peer, if appropriate. The final error code from processing
4895 * the call will be returned as rx EndCall()'s value. The given call's state
4896 * will be set to RX STATE DALLY, and threads waiting to establish a new call
4897 * on this connection are signalled (see the description of the rx NewCall() in
4900 * -1 Unspecified error has occurred.
4902 * \subsection sec5-6-7 Section 5.6.7: rx StartServer _ Activate installed
4906 * void rx StartServer( IN int donateMe)
4908 * This function starts server threads in support of the Rx services installed
4909 * via calls to rx NewService() (see Section 5.6.3). This routine first
4910 * computes the number of server threads it must create, governed by the
4911 * minProcs and maxProcs fields in the installed service descriptors. The
4912 * minProcs field specifies the minimum number of threads that are guaranteed
4913 * to be concurrently available to the given service. The maxProcs field
4914 * specifies the maximum number of threads that may ever be concurrently
4915 * assigned to the particular service, if idle threads are available. Using
4916 * this information, rx StartServer() computes the correct overall number of
4917 * threads as follows: For each installed service, minProcs threads will be
4918 * created, enforcing the minimality guarantee. Calculate the maximum
4919 * difference between the maxProcs and minProcs fields for each service, and
4920 * create this many additional server threads, enforcing the maximality
4923 * If the value placed in the donateMe argument is zero, then rx StartServer()
4924 * will simply return after performing as described above. Otherwise, the
4925 * thread making the rx StartServer() call will itself begin executing the
4926 * server thread loop. In this case, the rx StartServer() call will never
4931 * \subsection sec5-6-8 Section 5.6.8: rx PrintStats -- Print basic
4932 * statistics to a file
4935 * void rx PrintStats( IN FILE *file)
4937 * Prints Rx statistics (basically the contents of the struct rx stats holding
4938 * the statistics for the Rx facility) to the open file descriptor identified
4939 * by file. The output is ASCII text, and is intended for human consumption.
4940 * \note This function is available only if the Rx package has been compiled
4941 * with the RXDEBUG flag.
4945 * \subsection sec5-6-9 Section 5.6.9: rx PrintPeerStats _ Print peer
4946 * statistics to a file
4948 * void rx PrintPeerStats( IN FILE *file, IN struct rx peer *peer)
4950 * Prints the Rx peer statistics found in peer to the open file descriptor
4951 * identified by file. The output is in normal ASCII text, and is intended for
4952 * human consumption.
4953 * \note This function is available only if the Rx package has been compiled
4954 * with the RXDEBUG flag.
4958 * \subsection sec5-6-10 Section 5.6.10: rx finalize _ Shut down Rx
4962 * void rx finalize()
4964 * This routine may be used to shut down the Rx facility for either server or
4965 * client applications. All of the client connections will be gracefully
4966 * garbage-collected after their active calls are cleaned up. The result of
4967 * calling rx finalize() from a client program is that the server-side entity
4968 * will be explicitly advised that the client has terminated. This notification
4969 * frees the server-side application from having to probe the client until its
4970 * records eventually time out, and also allows it to free resources currently
4971 * assigned to that client's support.
4975 * \subsection sec5-6-11 Section 5.6.11: Semi-Exported Operations
4978 * As described in the introductory text in Section 5.6, entries in this
4979 * lexically-visible set of Rx functions are not meant to be called directly by
4980 * client applications, but rather are invoked by Rx macros called by users.
4982 * \subsection sec5-6-12 Section 5.6.12: rx WriteProc _ Write data to an
4986 * int rx WriteProc( IN struct rx call *call, IN char *buf, IN int nbytes)
4988 * Write nbytes of data from buffer buf into the Rx call identified by the call
4989 * parameter. The value returned by rx WriteProc() reports the number of bytes
4990 * actually written into the call. If zero is returned, then the rx Error()
4991 * macro may be used to obtain the call status.
4993 * This routine is called by the rx Write() macro, which is why it must be
4994 * exported by the Rx facility.
4996 * Indicates error in the given Rx call; use the rx Error() macro to determine
4999 * \subsection sec5-6-13 Section 5.6.13: rx ReadProc _ Read data from an
5003 * int rx ReadProc( IN struct rx call *call, IN char *buf, IN int nbytes)
5005 * Read up to nbytes of data from the Rx call identified by the call parameter
5006 * into the buf buffer. The value returned by rx ReadProc() reports the number
5007 * of bytes actually read from the call. If zero is returned, then the rx
5008 * Error() macro may be used to obtain the call status.
5010 * This routine is called by the rx Read() macro, which is why it must be
5011 * exported by the Rx facility.
5013 * Indicates error in the given Rx call; use the rx Error() macro to determine
5016 * \subsection sec5-6-1 Section 5.6.1: rx FlushWrite -- Flush buffered
5017 * data on outgoing call
5020 * void rx FlushWrite( IN struct rx call *call)
5022 * Flush any buffered data on the given Rx call to the stream. If the call is
5023 * taking place on a server connection, the call->mode is set to RX MODE EOF.
5024 * If the call is taking place on a client connection, the call->mode is set to
5025 * RX MODE RECEIVING.
5029 * \subsection sec5-6-15 Section 5.6.15: rx SetArrivalProc _ Set function
5030 * to invoke upon call packet arrival
5033 * void rx SetArrivalProc( IN struct rx call *call, IN VOID (*proc)(), IN VOID
5034 * *handle, IN VOID *arg)
5036 * Establish a procedure to be called when a packet arrives for a call. This
5037 * routine will be called at most once after each call, and will also be called
5038 * if there is an error condition on the call or the call is complete. The rx
5039 * SetArrivalProc() function is used by multicast Rx routines to build a
5040 * selection function that determines which of several calls is likely to be a
5041 * good one to read from. The implementor's comments in the Rx code state that,
5042 * due to the current implementation, it is probably only reasonable to use rx
5043 * SetArrivalProc() immediately after an rx NewCall(), and to only use it once.
5047 * \page chap6 Chapter 6 -- Example Server and Client
5049 * \section sec6-1 Section 6.1: Introduction
5052 * This chapter provides a sample program showing the use of Rx. Specifically,
5053 * the rxdemo application, with all its support files, is documented and
5054 * examined. The goal is to provide the reader with a fully-developed and
5055 * operational program illustrating the use of both regular Rx remote procedure
5056 * calls and streamed RPCs. The full text of the rxdemo application is
5057 * reproduced in the sections below, along with additional commentary.
5059 * Readers wishing to directly experiment with this example Rx application are
5060 * encouraged to examine the on-line version of rxdemo. Since it is a program
5061 * of general interest, it has been installed in the usr/contrib tree in the
5062 * grand.central.org cell. This area contains user-contributed software for the
5063 * entire AFS community. At the top of this tree is the
5064 * /afs/grand.central.org/darpa/usr/contrib directory. Both the server-side and
5065 * client-side rxdemo binaries (rxdemo server and rxdemo client, respectively)
5066 * may be found in the bin subdirectory. The actual sources reside in the
5067 * .site/grand.central.org/rxdemo/src subdirectory.
5069 * The rxdemo code is composed of two classes of files, namely those written by
5070 * a human programmer and those generated from the human-written code by the
5071 * Rxgen tool. Included in the first group of files are:
5072 * \li rxdemo.xg This is the RPC interface definition file, providing
5073 * high-level definitions of the supported calls.
5074 * \li rxdemo client.c: This is the rxdemo client program, calling upon the
5075 * associated server to perform operations defined by rxdemo.xg.
5076 * \li rxdemo server.c: This is the rxdemo server program, implementing the
5077 * operations promised in rxdemo.xg.
5078 * \li Makefile: This is the file that directs the compilation and
5079 * installation of the rxdemo code.
5081 * The class of automatically-generated files includes the following items:
5082 * \li rxdemo.h: This header file contains the set of constant definitions
5083 * present in rxdemo.xg, along with information on the RPC opcodes defined for
5085 * \li rxdemo.cs.c: This client-side stub file performs all the marshalling and
5086 * unmarshalling of the arguments for the RPC routines defined in rxdemo.xg.
5087 * \li rxdemo.ss.c: This stub file similarly defines all the marshalling and
5088 * unmarshalling of arguments for the server side of the RPCs, invokes the
5089 * routines defined within rxdemo server.c to implement the calls, and also
5090 * provides the dispatcher function.
5091 * \li rxdemo.xdr.c: This module defines the routines required to convert
5092 * complex user-defined data structures appearing as arguments to the Rx RPC
5093 * calls exported by rxdemo.xg into network byte order, so that correct
5094 * communication is guaranteed between clients and server with different memory
5097 * The chapter concludes with a section containing sample output from running
5098 * the rxdemo server and client programs.
5100 * \section sec6-2 Section 6.2: Human-Generated files
5103 * The rxdemo application is based on the four human-authored files described
5104 * in this section. They provide the basis for the construction of the full set
5105 * of modules needed to implement the specified Rx service.
5107 * \subsection sec6-2-1 Section 6.2.1: Interface file: rxdemo.xg
5110 * This file serves as the RPC interface definition file for this application.
5111 * It defines various constants, including the Rx service port to use and the
5112 * index of the null security object (no encryption is used by rxdemo). It
5113 * defines the RXDEMO MAX and RXDEMO MIN constants, which will be used by the
5114 * server as the upper and lower bounds on the number of Rx listener threads to
5115 * run. It also defines the set of error codes exported by this facility.
5116 * finally, it provides the RPC function declarations, namely Add() and
5117 * Getfile(). Note that when building the actual function definitions, Rxgen
5118 * will prepend the value of the package line in this file, namely "RXDEMO ",
5119 * to the function declarations. Thus, the generated functions become RXDEMO
5120 * Add() and RXDEMO Getfile(), respectively. Note the use of the split keyword
5121 * in the RXDEMO Getfile() declaration, which specifies that this is a streamed
5122 * call, and actually generates two client-side stub routines (see Section
5126 * /*=======================================================================
5127 * * Interface for an example Rx server/client application, using both * *
5128 * standard and streamed calls. * ** * Edward R. Zayas * * Transarc
5129 * Corporation * ** ** * The United States Government has rights in this
5130 * work pursuant * * to contract no. MDA972-90-C-0036 between the United
5131 * States Defense * * Advanced Research Projects Agency and Transarc
5132 * Corporation. * ** * (C) Copyright 1991 Transarc Corporation * ** *
5133 * Redistribution and use in source and binary forms are permitted *
5134 * provided that: (1) source distributions retain this entire copy- * *
5135 * right notice and comment, and (2) distributions including binaries * *
5136 * display the following acknowledgement: * ** * ''This product includes
5137 * software developed by Transarc * * Corporation and its contributors'' *
5138 * ** * in the documentation or other materials mentioning features or * *
5139 * use of this software. Neither the name of Transarc nor the names * * of
5140 * its contributors may be used to endorse or promote products * * derived
5141 * from this software without specific prior written * * permission. * **
5142 * * THIS SOFTWARE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED *
5143 * * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
5144 * * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
5145 * =======================================================================*/
5148 * %#include <rx/rx.h>
5149 * %#include <rx/rx_null.h>
5150 * %#define RXDEMO_SERVER_PORT 8000 /* Service port to advertise */
5151 * %#define RXDEMO_SERVICE_PORT 0 /* User server's port */
5152 * %#define RXDEMO_SERVICE_ID 4 /* Service ID */
5153 * %#define RXDEMO_NULL_SECOBJ_IDX 0 /* Index of null security object */
5155 * /* Maximum number of requests that will be handled by this service
5156 * * simultaneously. This number will be guaranteed to execute in
5157 * * parallel if other service's results are being processed. */
5159 * %#define RXDEMO_MAX 3
5161 * /* Minimum number of requests that are guaranteed to be
5162 * * handled simultaneously. */
5164 * %#define RXDEMO_MIN 2
5166 * /* Index of the "null" security class in the sample service. */
5168 * %#define RXDEMO_NULL 0
5170 * /* Maximum number of characters in a file name (for demo purposes). */
5172 * %#define RXDEMO_NAME_MAX_CHARS 64
5174 * /* Define the max number of bytes to transfer at one shot. */
5176 * %#define RXDEMO_BUFF_BYTES 512
5178 * /* Values returned by the RXDEMO_Getfile() call.
5179 * * RXDEMO_CODE_SUCCESS : Everything went fine.
5180 * * RXDEMO_CODE_CANT_OPEN : Can't open named file.
5181 * * RXDEMO_CODE_CANT_STAT : Can't stat open file.
5182 * * RXDEMO_CODE_CANT_READ : Error reading the open file.
5183 * * RXDEMO_CODE_WRITE_ERROR : Error writing the open file. */
5185 * /* ------------Interface calls defined for this service ----------- */
5186 * %#define RXDEMO_CODE_SUCCESS 0
5187 * %#define RXDEMO_CODE_CANT_OPEN 1
5188 * %#define RXDEMO_CODE_CANT_STAT 2
5189 * %#define RXDEMO_CODE_CANT_READ 3
5190 * %#define RXDEMO_CODE_WRITE_ERROR 4
5191 * /* -------------------------------------------------------------------
5195 * * Add the two numbers provided and return the result. *
5197 * * int a_first : first operand.
5198 * * int a_second : Second operand.
5199 * * int *a_result : Sum of the above. *
5200 * * Side effects: None.
5201 * *-------------------------------------------------------------------- */
5203 * Add(IN int a, int b, OUT int *result) = 1;
5204 * /*-------------------------------------------------------------------
5205 * * RXDEMO_Getfile *
5207 * * Return the contents of the named file in the server's environment.
5209 * * STRING a_nameToRead : Name of the file whose contents are to be
5211 * * int *a_result : Set to the result of opening and reading the file
5212 * * on the server side. *
5213 * * Side effects: None.
5214 * *-------------------------------------------------------------------- */
5216 * Getfile(IN string a_nameToRead<RXDEMO_NAME_MAX_CHARS>, OUT int *a_result)
5220 * \subsection sec6-2-2 Section 6.2.2: Client Program: rxdemo client.c
5223 * The rxdemo client program, rxdemo client, calls upon the associated server
5224 * to perform operations defined by rxdemo.xg. After its header, it defines a
5225 * private GetIPAddress() utility routine, which given a character string host
5226 * name will return its IP address.
5229 * /*=======================================================================
5230 * % Client side of an example Rx application, using both standard and % %
5231 * streamed calls. % %% % Edward R. Zayas % % Transarc Corporation % %%
5232 * %% % The United States Government has rights in this work pursuant % %
5233 * to contract no. MDA972-90-C-0036 between the United States Defense % %
5234 * Advanced Research Projects Agency and Transarc Corporation. % %% % (C)
5235 * Copyright 1991 Transarc Corporation % %% % Redistribution and use in source
5236 * and binary forms are permitted % % provided that: (1) source distributions
5237 * retain this entire copy- % % right notice and comment, and (2) distributions
5238 * including binaries % % display the following acknowledgement: % %% %
5239 * ''This product includes software developed by Transarc % % Corporation and
5240 * its contributors'' % %% % in the documentation or other materials mentioning
5241 * features or % % use of this software. Neither the name of Transarc nor the
5242 * names % % of its contributors may be used to endorse or promote products % %
5243 * derived from this software without specific prior written % % permission.
5244 * % %% % THIS SOFTWARE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED
5245 * % % WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF % %
5246 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
5247 * % %=======================================================================
5250 * #include <sys/types.h>
5251 * #include <netdb.h>
5252 * #include <stdio.h>
5253 * #include "rxdemo.h"
5254 * static char pn[] = "rxdemo"; /* Program name */
5255 * static u_long GetIpAddress(a_hostName) char *a_hostName;
5256 * { /* GetIPAddress */
5257 * static char rn[] = "GetIPAddress"; /* Routine name */
5258 * struct hostent *hostEntP; /* Ptr to host descriptor */
5259 * u_long hostIPAddr; /* Host IP address */
5260 * hostEntP = gethostbyname(a_hostName);
5261 * if (hostEntP == (struct hostent *)0) {
5262 * printf("[%s:%s] Host '%s' not found\n",
5263 * pn, rn, a_hostName);
5266 * if (hostEntP->h_length != sizeof(u_long)) {
5267 * printf("[%s:%s] Wrong host address length (%d bytes instead of
5269 * pn, rn, hostEntP->h_length, sizeof(u_long));
5272 * bcopy(hostEntP->h_addr, (char *)&hostIPAddr, sizeof(hostIPAddr));
5273 * return(hostIPAddr);
5274 * } /* GetIpAddress */
5278 * The main program section of the client code, after handling its command line
5279 * arguments, starts off by initializing the Rx facility.
5286 * struct rx_connection *rxConnP; /* Ptr to server connection */
5287 * struct rx_call *rxCallP; /* Ptr to Rx call descriptor */
5288 * u_long hostIPAddr; /* IP address of chosen host */
5289 * int demoUDPPort; /* UDP port of Rx service */
5290 * struct rx_securityClass *nullSecObjP; /* Ptr to null security object */
5291 * int operand1, operand2; /* Numbers to add int sum; Their sum */
5292 * int code; /* Return code */
5293 * char fileName[64]; /* Buffer for desired file's name */
5294 * long fileDataBytes; /* Num bytes in file to get */
5295 * char buff[RXDEMO_BUFF_BYTES+1]; /* Read buffer */
5296 * int currBytesToRead; /* Num bytes to read in one iteration */
5297 * int maxBytesToRead; /* Max bytes to read in one iteration */
5298 * int bytesReallyRead; /* Num bytes read off Rx stream */
5299 * int getResults; /* Results of the file fetch */
5300 * printf("\n%s: Example Rx client process\n\n", pn);
5301 * if ((argc < 2) || (argc > 3)) {
5302 * printf("Usage: rxdemo <HostName> [PortToUse]");
5305 * hostIPAddr = GetIpAddress(argv[1]);
5307 * demoUDPPort = atoi(argv[2]);
5309 * demoUDPPort = RXDEMO_SERVER_PORT;
5310 * /* Initialize the Rx facility. */
5311 * code = rx_Init(htons(demoUDPPort));
5313 * printf("** Error calling rx_Init(); code is %d\n", code);
5316 * /* Create a client-side null security object. */
5317 * nullSecObjP = rxnull_NewClientSecurityObject();
5318 * if (nullSecObjP == (struct rx_securityClass *)0) {
5319 * printf("%s: Can't create a null client-side security
5323 * /* Set up a connection to the desired Rx service, telling it to use
5324 * * the null security object we just created. */
5325 * printf("Connecting to Rx server on '%s', IP address 0x%x, UDP port
5326 * %d\n", argv[1], hostIPAddr, demoUDPPort);
5327 * rxConnP = rx_NewConnection(hostIPAddr, RXDEMO_SERVER_PORT,
5328 * RXDEMO_SERVICE_ID, nullSecObjP, RXDEMO_NULL_SECOBJ_IDX);
5329 * if (rxConnP == (struct rx_connection *)0) {
5330 * printf("rxdemo: Can't create connection to server!\n");
5333 * printf(" ---> Connected.\n");
5337 * The rx Init() invocation initializes the Rx library and defines the desired
5338 * service UDP port (in network byte order). The rxnull
5339 * NewClientSecurityObject() call creates a client-side Rx security object that
5340 * does not perform any authentication on Rx calls. Once a client
5341 * authentication object is in hand, the program calls rx NewConnection(),
5342 * specifying the host, UDP port, Rx service ID, and security information
5343 * needed to establish contact with the rxdemo server entity that will be
5344 * providing the service.
5346 * With the Rx connection in place, the program may perform RPCs. The first one
5347 * to be invoked is RXDEMO Add():
5350 * /* Perform our first, simple remote procedure call. */
5353 * printf("Asking server to add %d and %d: ", operand1, operand2);
5354 * code = RXDEMO_Add(rxConnP, operand1, operand2, &sum);
5356 * printf(" // ** Error in the RXDEMO_Add RPC: code is %d\n", code);
5359 * printf("Reported sum is %d\n", sum);
5363 * The first argument to RXDEMO Add() is a pointer to the Rx connection
5364 * established above. The client-side body of the RXDEMO Add() function was
5365 * generated from the rxdemo.xg interface file, and resides in the rxdemo.cs.c
5366 * file (see Section 6.3.1). It gives the appearance of being a normal C
5369 * The second RPC invocation involves the more complex, streamed RXDEMO
5370 * Getfile() function. More of the internal Rx workings are exposed in this
5371 * type of call. The first additional detail to consider is that we must
5372 * manually create a new Rx call on the connection.
5375 * /* Set up for our second, streamed procedure call. */
5376 * printf("Name of file to read from server: ");
5377 * scanf("%s", fileName);
5378 * maxBytesToRead = RXDEMO_BUFF_BYTES;
5379 * printf("Setting up an Rx call for RXDEMO_Getfile...");
5380 * rxCallP = rx_NewCall(rxConnP);
5381 * if (rxCallP == (struct rx_call *)0) {
5382 * printf("** Can't create call\n");
5389 * Once the Rx call structure has been created, we may begin executing the call
5390 * itself. Having been declared to be split in the interface file, Rxgen
5391 * creates two function bodies for rxdemo Getfile() and places them in
5392 * rxdemo.cs.c. The first, StartRXDEMO Getfile(), is responsible for
5393 * marshalling the outgoing arguments and issuing the RPC. The second,
5394 * EndRXDEMO Getfile(), takes care of unmarshalling the non-streamed OUT
5395 * function parameters. The following code fragment illustrates how the RPC is
5396 * started, using the StartRXDEMO Getfile() routine to pass the call parameters
5400 * /* Sending IN parameters for the streamed call. */
5401 * code = StartRXDEMO_Getfile(rxCallP, fileName);
5403 * printf("** Error calling StartRXDEMO_Getfile(); code is %d\n",
5410 * Once the call parameters have been shipped, the server will commence
5411 * delivering the "stream" data bytes back to the client on the given Rx call
5412 * structure. The first longword to come back on the stream specifies the
5413 * number of bytes to follow.
5416 * Begin reading the data being shipped from the server in response to * our
5417 * setup call. The first longword coming back on the Rx call is
5418 * the number of bytes to follow. It appears in network byte order,
5419 * so we have to fix it up before referring to it.
5422 * bytesReallyRead = rx_Read(rxCallP, &fileDataBytes, sizeof(long));
5423 * if (bytesReallyRead != sizeof(long)) {
5424 * printf("** Only %d bytes read for file length; should have been %d\n",
5425 * bytesReallyRead, sizeof(long));
5428 * fileDataBytes = ntohl(fileDataBytes);
5432 * Once the client knows how many bytes will be sent, it runs a loop in which
5433 * it reads a buffer at a time from the Rx call stream, using rx Read() to
5434 * accomplish this. In this application, all that is done with each
5435 * newly-acquired buffer of information is printing it out.
5438 * /* Read the file bytes via the Rx call, a buffer at a time. */
5439 * printf("[file contents (%d bytes) fetched over the Rx call appear
5440 * below]\n\n", fileDataBytes);
5441 * while (fileDataBytes > 0)
5443 * currBytesToRead = (fileDataBytes > maxBytesToRead ? maxBytesToRead :
5445 * bytesReallyRead = rx_Read(rxCallP, buff, currBytesToRead);
5446 * if (bytesReallyRead != currBytesToRead)
5448 * printf("\nExpecting %d bytes on this read, got %d instead\n",
5449 * currBytesToRead, bytesReallyRead);
5452 * /* Null-terminate the chunk before printing it. */
5453 * buff[currBytesToRead] = 0;
5454 * printf("%s", buff);
5455 * /* Adjust the number of bytes left to read. */
5456 * fileDataBytes -= currBytesToRead;
5457 * } /* Read one bufferful of the file */
5461 * After this loop terminates, the Rx stream has been drained of all data. The
5462 * Rx call is concluded by invoking the second of the two
5463 * automatically-generated functions, EndRXDEMO Getfile(), which retrieves the
5464 * call's OUT parameter from the server.
5467 * /* finish off the Rx call, getting the OUT parameters. */
5468 * printf("\n\n[End of file data]\n");
5469 * code = EndRXDEMO_Getfile(rxCallP, &getResults);
5472 * printf("** Error getting file transfer results; code is %d\n",
5479 * With both normal and streamed Rx calls accomplished, the client demo code
5480 * concludes by terminating the Rx call it set up earlier. With that done, the
5484 * /* finish off the Rx call. */
5485 * code = rx_EndCall(rxCallP, code);
5487 * printf("Error in calling rx_EndCall(); code is %d\n", code);
5489 * printf("\n\nrxdemo complete.\n");
5492 * \subsection sec6-2-3 Server Program: rxdemo server.c
5495 * The rxdemo server program, rxdemo server, implements the operations promised
5496 * in the rxdemo.xg interface file.
5498 * After the initial header, the external function RXDEMO ExecuteRequest() is
5499 * declared. The RXDEMO ExecuteRequest() function is generated automatically by
5500 * rxgen from the interface file and deposited in rxdemo.ss.c. The main program
5501 * listed below will associate this RXDEMO ExecuteRequest() routine with the Rx
5502 * service to be instantiated.
5505 * /*======================================================================
5506 * % % Advanced Research Projects Agency and Transarc Corporation. % %% %
5507 * (C) Copyright 1991 Transarc Corporation % %% % Redistribution and use in
5508 * source and binary forms are permitted % % provided that: (1) source
5509 * distributions retain this entire copy- % % right notice and comment, and
5510 * (2) distributions including binaries % % display the following
5511 * acknowledgement: % %% % ''This product includes software developed by
5512 * Transarc % % Corporation and its contributors'' % %% % in the documentation
5513 * or other materials mentioning features or % % use of this software. Neither
5514 * the name of Transarc nor the names % % of its contributors may be used to
5515 * endorse or promote products % % derived from this software without specific
5516 * prior written % % permission. % %% % THIS SOFTWARE IS PROVIDED "AS IS" AND
5517 * WITHOUT ANY EXPRESS OR IMPLIED % % WARRANTIES, INCLUDING, WITHOUT
5519 * THE IMPLIED WARRANTIES OF % % MERCHANTABILITY AND FITNESS FOR A PARTICULAR
5521 * ====================================================================== */
5523 * /* Server portion of the example RXDEMO application, using both %
5524 * standard and streamed calls. % % Edward R. Zayas % Transarc Corporation %
5525 * % % The United States Government has rights in this work pursuant %
5526 * to contract no. MDA972-90-C-0036 between the United States Defense % */
5528 * #include <sys/types.h>
5529 * #include <sys/stat.h>
5530 * #include <sys/file.h>
5531 * #include <netdb.h>
5532 * #include <stdio.h>
5533 * #include "rxdemo.h"
5534 * #define N_SECURITY_OBJECTS 1
5535 * extern RXDEMO_ExecuteRequest();
5539 * After choosing either the default or user-specified UDP port on which the Rx
5540 * service will be established, rx Init() is called to set up the library.
5547 * static char pn[] = "rxdemo_server"; /* Program name */
5548 * struct rx_securityClass
5549 * (securityObjects[1]); /* Security objs */
5550 * struct rx_service *rxServiceP; /* Ptr to Rx service descriptor */
5551 * struct rx_call *rxCallP; /* Ptr to Rx call descriptor */
5552 * int demoUDPPort; /* UDP port of Rx service */
5553 * int fd; /* file descriptor */
5554 * int code; /* Return code */
5555 * printf("\n%s: Example Rx server process\n\n", pn);
5557 * printf("Usage: rxdemo [PortToUse]");
5561 * demoUDPPort = atoi(argv[1]);
5563 * demoUDPPort = RXDEMO_SERVER_PORT;
5565 * /* Initialize the Rx facility, telling it the UDP port number this
5566 * * server will use for its single service. */
5568 * printf("Listening on UDP port %d\n", demoUDPPort);
5569 * code = rx_Init(demoUDPPort);
5571 * printf("** Error calling rx_Init(); code is %d\n", code);
5577 * A security object specific to the server side of an Rx conversation is
5578 * created in the next code fragment. As with the client side of the code, a
5579 * "null" server security object, namely one that does not perform any
5580 * authentication at all, is constructed with the rxnull
5581 * NewServerSecurityObject() function.
5584 * /* Create a single server-side security object. In this case, the
5585 * * null security object (for unauthenticated connections) will be used
5586 * * to control security on connections made to this server. */
5588 * securityObjects[RXDEMO_NULL_SECOBJ_IDX] =
5589 * rxnull_NewServerSecurityObject();
5590 * if (securityObjects[RXDEMO_NULL_SECOBJ_IDX] == (struct rx_securityClass
5592 * printf("** Can't create server-side security object\n");
5598 * The rxdemo server program is now in a position to create the desired Rx
5599 * service, primed to recognize exactly those interface calls defined in
5600 * rxdemo.xg. This is accomplished by calling the rx NewService() library
5601 * routine, passing it the security object created above and the generated Rx
5602 * dispatcher routine.
5605 * /* Instantiate a single sample service. The rxgen-generated procedure
5606 * * called to dispatch requests is passed in (RXDEMO_ExecuteRequest). */
5608 * rxServiceP = rx_NewService( 0,
5609 * RXDEMO_SERVICE_ID,
5613 * RXDEMO_ExecuteRequest
5615 * if (rxServiceP == (struct rx_service *) 0) {
5616 * printf("** Can't create Rx service\n");
5622 * The final step in this main routine is to activate servicing of calls to the
5623 * exported Rx interface. Specifically, the proper number of threads are
5624 * created to handle incoming interface calls. Since we are passing a non-zero
5625 * argument to the rx StartServer() call, the main program will itself begin
5626 * executing the server thread loop, never returning from the rx StartServer()
5627 * call. The print statement afterwards should never be executed, and its
5628 * presence represents some level of paranoia, useful for debugging
5629 * malfunctioning thread packages.
5632 * /* Start up Rx services, donating this thread to the server pool. */
5633 * rx_StartServer(1);
5634 * /* We should never return from the previous call. */
5635 * printf("** rx_StartServer() returned!!\n"); exit(1);
5640 * Following the main procedure are the functions called by the
5641 * automatically-generated routines in the rxdemo.ss.c module to implement the
5642 * specific routines defined in the Rx interface.
5644 * The first to be defined is the RXDEMO Add() function. The arguments for this
5645 * routine are exactly as they appear in the interface definition, with the
5646 * exception of the very first. The a rxCallP parameter is a pointer to the Rx
5647 * structure describing the call on which this function was activated. All
5648 * user-supplied routines implementing an interface function are required to
5649 * have a pointer to this structure as their first parameter. Other than
5650 * printing out the fact that it has been called and which operands it
5651 * received, all that RXDEMO Add() does is compute the sum and place it in the
5654 * Since RXDEMO Add() is a non-streamed function, with all data travelling
5655 * through the set of parameters, this is all that needs to be done. To mark a
5656 * successful completion, RXDEMO Add() returns zero, which is passed all the
5657 * way through to the RPC's client.
5660 * int RXDEMO_Add(a_rxCallP, a_operand1, a_operand2, a_resultP)
5661 * struct rx_call *a_rxCallP;
5662 * int a_operand1, a_operand2;
5664 * { /* RXDEMO_Add */
5665 * printf("\t[Handling call to RXDEMO_Add(%d, %d)]\n",
5666 * a_operand1, a_operand2);
5667 * *a_resultP = a_operand1 + a_operand2;
5669 * } /* RXDEMO_Add */
5673 * The next and final interface routine defined in this file is RXDEMO
5674 * Getfile(). Declared as a split function in the interface file, RXDEMO
5675 * Getfile() is an example of a streamed Rx call. As with RXDEMO Add(), the
5676 * initial parameter is required to be a pointer to the Rx call structure with
5677 * which this routine is associated, Similarly, the other parameters appear
5678 * exactly as in the interface definition, and are handled identically.
5680 * The difference between RXDEMO Add() and RXDEMO Getfile() is in the use of
5681 * the rx Write() library routine by RXDEMO Getfile() to feed the desired
5682 * file's data directly into the Rx call stream. This is an example of the use
5683 * of the a rxCallP argument, providing all the information necessary to
5684 * support the rx Write() activity.
5686 * The RXDEMO Getfile() function begins by printing out the fact that it's been
5687 * called and the name of the requested file. It will then attempt to open the
5688 * requested file and stat it to determine its size.
5691 * int RXDEMO_Getfile(a_rxCallP, a_nameToRead, a_resultP)
5692 * struct rx_call *a_rxCallP;
5693 * char *a_nameToRead;
5695 * { /* RXDEMO_Getfile */
5696 * struct stat fileStat; /* Stat structure for file */
5697 * long fileBytes; /* Size of file in bytes */
5698 * long nbofileBytes; /* file bytes in network byte order */
5699 * int code; /* Return code */
5700 * int bytesReallyWritten; /* Bytes written on Rx channel */
5701 * int bytesToSend; /* Num bytes to read & send this time */
5702 * int maxBytesToSend; /* Max num bytes to read & send ever */
5703 * int bytesRead; /* Num bytes read from file */
5704 * char buff[RXDEMO_BUFF_BYTES+1]; /* Read buffer */
5705 * int fd; /* file descriptor */
5706 * maxBytesToSend = RXDEMO_BUFF_BYTES;
5707 * printf("\t[Handling call to RXDEMO_Getfile(%s)]\n", a_nameToRead);
5708 * fd = open(a_nameToRead, O_RDONLY, 0444);
5710 * printf("\t\t[**Can't open file '%s']\n", a_nameToRead);
5711 * *a_resultP = RXDEMO_CODE_CANT_OPEN;
5714 * printf("\t\t[file opened]\n");
5715 * /* Stat the file to find out how big it is. */
5716 * code = fstat(fd, &fileStat);
5718 * a_resultP = RXDEMO_CODE_CANT_STAT;
5719 * printf("\t\t[file closed]\n");
5723 * fileBytes = fileStat.st_size;
5724 * printf("\t\t[file has %d bytes]\n", fileBytes);
5728 * Only standard unix operations have been used so far. Now that the file is
5729 * open, we must first feed the size of the file, in bytes, to the Rx call
5730 * stream. With this information, the client code can then determine how many
5731 * bytes will follow on the stream. As with all data that flows through an Rx
5732 * stream, the longword containing the file size, in bytes, must be converted
5733 * to network byte order before being sent. This insures that the recipient may
5734 * properly interpret the streamed information, regardless of its memory
5738 * nbofileBytes = htonl(fileBytes);
5739 * /* Write out the size of the file to the Rx call. */
5740 * bytesReallyWritten = rx_Write(a_rxCallP, &nbofileBytes, sizeof(long));
5741 * if (bytesReallyWritten != sizeof(long)) {
5742 * printf("** %d bytes written instead of %d for file length\n",
5743 * bytesReallyWritten, sizeof(long));
5744 * *a_resultP = RXDEMO_CODE_WRITE_ERROR;
5745 * printf("\t\t[file closed]\n");
5752 * Once the number of file bytes has been placed in the stream, the RXDEMO
5753 * Getfile() routine runs a loop, reading a buffer's worth of the file and then
5754 * inserting that buffer of file data into the Rx stream at each iteration.
5755 * This loop executes until all of the file's bytes have been shipped. Notice
5756 * there is no special end-of-file character or marker inserted into the
5759 * The body of the loop checks for both unix read() and rx Write errors. If
5760 * there is a problem reading from the unix file into the transfer buffer, it
5761 * is reflected back to the client by setting the error return parameter
5762 * appropriately. Specifically, an individual unix read() operation could fail
5763 * to return the desired number of bytes. Problems with rx Write() are handled
5764 * similarly. All errors discovered in the loop result in the file being
5765 * closed, and RXDEMO Getfile() exiting with a non-zero return value.
5768 * /* Write out the contents of the file, one buffer at a time. */
5769 * while (fileBytes > 0) {
5770 * /* figure out the number of bytes to
5771 * * read (and send) this time. */
5772 * bytesToSend = (fileBytes > maxBytesToSend ?
5773 * maxBytesToSend : fileBytes);
5774 * bytesRead = read(fd, buff, bytesToSend);
5775 * if (bytesRead != bytesToSend) {
5776 * printf("Read %d instead of %d bytes from the file\n",
5777 * bytesRead, bytesToSend);
5778 * *a_resultP = RXDEMO_CODE_WRITE_ERROR;
5779 * printf("\t\t[file closed]\n");
5783 * /* Go ahead and send them. */
5784 * bytesReallyWritten = rx_Write(a_rxCallP, buff, bytesToSend);
5785 * if (bytesReallyWritten != bytesToSend) {
5786 * printf("%d file bytes written instead of %d\n",
5787 * bytesReallyWritten, bytesToSend);
5788 * *a_resultP = RXDEMO_CODE_WRITE_ERROR;
5789 * printf("\t\t[file closed]\n");
5793 * /* Update the number of bytes left to go. */
5794 * fileBytes -= bytesToSend;
5795 * } /* Write out the file to our caller */
5799 * Once all of the file's bytes have been shipped to the remote client, all
5800 * that remains to be done is to close the file and return successfully.
5803 * /* Close the file, then return happily. */
5804 * *a_resultP = RXDEMO_CODE_SUCCESS;
5805 * printf("\t\t[file closed]\n");
5808 * } /* RXDEMO_Getfile */
5811 * \subsection sec6-2-4 Section 6.2.4: Makefile
5814 * This file directs the compilation and installation of the rxdemo code. It
5815 * specifies the locations of libraries, include files, sources, and such tools
5816 * as Rxgen and install, which strips symbol tables from executables and places
5817 * them in their target directories. This Makefile demostrates cross-cell
5818 * software development, with the rxdemo sources residing in the
5819 * grand.central.org cell and the AFS include files and libraries accessed from
5820 * their locations in the transarc.com cell.
5822 * In order to produce and install the rxdemo server and rxdemo client
5823 * binaries, the system target should be specified on the command line when
5829 * A note of caution is in order concerning generation of the rxdemo binaries.
5830 * While tools exist that deposit the results of all compilations to other
5831 * (architecture-specific) directories, and thus facilitate multiple
5832 * simultaneous builds across a variety of machine architectures (e.g.,
5833 * Transarc's washtool), the assumption is made here that compilations will
5834 * take place directly in the directory containing all the rxdemo sources.
5835 * Thus, a user will have to execute a make clean command to remove all
5836 * machine-specific object, library, and executable files before compiling for
5837 * a different architecture. Note, though, that the binaries are installed into
5838 * a directory specifically reserved for the current machine type.
5839 * Specifically, the final pathname component of the ${PROJ DIR}bin
5840 * installation target is really a symbolic link to ${PROJ DIR}.bin/@sys.
5842 * Two libraries are needed to support the rxdemo code. The first is obvious,
5843 * namely the Rx librx.a library. The second is the lightweight thread package
5844 * library, liblwp.a, which implements all the threading operations that must
5845 * be performed. The include files are taken from the unix /usr/include
5846 * directory, along with various AFS-specific directories. Note that for
5847 * portability reasons, this Makefile only contains fully-qualified AFS
5848 * pathnames and "standard" unix pathnames (such as /usr/include).
5851 * /*#=======================================================================#
5852 * # The United States Government has rights in this work pursuant # # to
5853 * contract no. MDA972-90-C-0036 between the United States Defense # # Advanced
5854 * Research Projects Agency and Transarc Corporation. # # # # (C) Copyright
5856 * Transarc Corporation # # # # Redistribution and use in source and binary
5858 * are permitted # # provided that: (1) source distributions retain this entire
5859 * copy-# # right notice and comment, and (2) distributions including binaries
5861 * # display the following acknowledgement: # # # # ''This product includes
5862 * software developed by Transarc # # Corporation and its contributors'' # # #
5864 * in the documentation or other materials mentioning features or # # use of
5866 * software. Neither the name of Transarc nor the names # # of its contributors
5867 * may be used to endorse or promote products # # derived from this software
5868 * without specific prior written # # permission. # # # # THIS SOFTWARE IS
5869 * PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED # # WARRANTIES,
5871 * WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF # # MERCHANTABILITY AND
5873 * FOR A PARTICULAR PURPOSE. #
5874 * #=======================================================================# */
5877 * TOOL_CELL = grand.central.org
5878 * AFS_INCLIB_CELL = transarc.com
5879 * USR_CONTRIB = /afs/${TOOL_CELL}/darpa/usr/contrib/
5880 * PROJ_DIR = ${USR_CONTRIB}.site/grand.central.org/rxdemo/
5881 * AFS_INCLIB_DIR = /afs/${AFS_INCLIB_CELL}/afs/dest/
5882 * RXGEN = ${AFS_INCLIB_DIR}bin/rxgen
5883 * INSTALL = ${AFS_INCLIB_DIR}bin/install
5884 * LIBS = ${AFS_INCLIB_DIR}lib/librx.a \ ${AFS_INCLIB_DIR}lib/liblwp.a
5887 * -I${AFS_INCLIB_DIR}include \
5888 * -I${AFS_INCLIB_DIR}include/afs \
5889 * -I${AFS_INCLIB_DIR} \
5895 * ${INSTALL} rxdemo_client
5897 * ${INSTALL} rxdemo_server
5900 * all: rxdemo_client rxdemo_server
5902 * rxdemo_client: rxdemo_client.o ${LIBS} rxdemo.cs.o ${CC} ${CFLAGS}
5903 * -o rxdemo_client rxdemo_client.o rxdemo.cs.o ${LIBS}
5905 * rxdemo_server: rxdemo_server.o rxdemo.ss.o ${LIBS} ${CC} ${CFLAGS}
5906 * -o rxdemo_server rxdemo_server.o rxdemo.ss.o ${LIBS}
5908 * rxdemo_client.o: rxdemo.h
5910 * rxdemo_server.o: rxdemo.h
5912 * rxdemo.cs.c rxdemo.ss.c rxdemo.er.c rxdemo.h: rxdemo.xg rxgen rxdemo.xg
5914 * clean: rm -f *.o rxdemo.cs.c rxdemo.ss.c rxdemo.xdr.c rxdemo.h \
5915 * rxdemo_client rxdemo_server core
5918 * \section sec6-3 Section 6.3: Computer-Generated files
5921 * The four human-generated files described above provide all the information
5922 * necessary to construct the full set of modules to support the rxdemo example
5923 * application. This section describes those routines that are generated from
5924 * the base set by Rxgen, filling out the code required to implement an Rx
5927 * \subsection sec6-3-1 Client-Side Routines: rxdemo.cs.c
5930 * The rxdemo client.c program, described in Section 6.2.2, calls the
5931 * client-side stub routines contained in this module in order to make rxdemo
5932 * RPCs. Basically, these client-side stubs are responsible for creating new Rx
5933 * calls on the given connection parameter and then marshalling and
5934 * unmarshalling the rest of the interface call parameters. The IN and INOUT
5935 * arguments, namely those that are to be delivered to the server-side code
5936 * implementing the call, must be packaged in network byte order and shipped
5937 * along the given Rx call. The return parameters, namely those objects
5938 * declared as INOUT and OUT, must be fetched from the server side of the
5939 * associated Rx call, put back in host byte order, and inserted into the
5940 * appropriate parameter variables.
5942 * The first part of rxdemo.cs.c echoes the definitions appearing in the
5943 * rxdemo.xg interface file, and also #includes another Rxgen-generated file,
5947 * /*======================================================================%
5948 * * % THIS SOFTWARE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED %
5949 * * % WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF %
5950 * * % MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. %
5951 * * %====================================================================== */
5952 * /* Machine generated file --Do NOT edit */
5954 * #include "rxdemo.h"
5955 * #define RXDEMO_CODE_WRITE_ERROR 4
5957 * #include <rx/rx.h>
5958 * #include <rx/rx_null.h>
5959 * #define RXDEMO_SERVER_PORT 8000 /* Service port to advertise */
5960 * #define RXDEMO_SERVICE_PORT 0 /* User server's port */
5961 * #define RXDEMO_SERVICE_ID 4 /* Service ID */
5962 * #define RXDEMO_NULL_SECOBJ_IDX 0 /* Index of null security object */
5963 * #define RXDEMO_MAX 3
5964 * #define RXDEMO_MIN 2
5965 * #define RXDEMO_NULL 0
5966 * #define RXDEMO_NAME_MAX_CHARS 64
5967 * #define RXDEMO_BUFF_BYTES 512
5968 * #define RXDEMO_CODE_SUCCESS 0
5969 * #define RXDEMO_CODE_CANT_OPEN 1
5970 * #define RXDEMO_CODE_CANT_STAT 2
5971 * #define RXDEMO_CODE_CANT_READ 3
5972 * #define RXDEMO_CODE_WRITE_ERROR 4
5976 * The next code fragment defines the client-side stub for the RXDEMO Add()
5977 * routine, called by the rxdemo client program to execute the associated RPC.
5980 * int RXDEMO_Add(z_conn, a, b, result) register struct rx_connection *z_conn;
5984 * struct rx_call *z_call = rx_NewCall(z_conn);
5985 * static int z_op = 1;
5988 * xdrrx_create(&z_xdrs, z_call, XDR_ENCODE);
5989 * /* Marshal the arguments */
5990 * if ((!xdr_int(&z_xdrs, &z_op))
5991 * || (!xdr_int(&z_xdrs, &a))
5992 * || (!xdr_int(&z_xdrs, &b))) {
5993 * z_result = RXGEN_CC_MARSHAL;
5996 * /* Un-marshal the reply arguments */
5997 * z_xdrs.x_op = XDR_DECODE;
5998 * if ((!xdr_int(&z_xdrs, result))) {
5999 * z_result = RXGEN_CC_UNMARSHAL;
6002 * z_result = RXGEN_SUCCESS;
6003 * fail: return rx_EndCall(z_call, z_result);
6008 * The very first operation performed by RXDEMO Add() occurs in the local
6009 * variable declarations, where z call is set to point to the structure
6010 * describing a newly-created Rx call on the given connection. An XDR
6011 * structure, z xdrs, is then created for the given Rx call with xdrrx
6012 * create(). This XDR object is used to deliver the proper arguments, in
6013 * network byte order, to the matching server stub code. Three calls to xdr
6014 * int() follow, which insert the appropriate Rx opcode and the two operands
6015 * into the Rx call. With the IN arguments thus transmitted, RXDEMO Add()
6016 * prepares to pull the value of the single OUT parameter. The z xdrs XDR
6017 * structure, originally set to XDR ENCODE objects, is now reset to XDR DECODE
6018 * to convert further items received into host byte order. Once the return
6019 * parameter promised by the function is retrieved, RXDEMO Add() returns
6022 * Should any failure occur in passing the parameters to and from the server
6023 * side of the call, the branch to fail will invoke Rx EndCall(), which advises
6024 * the server that the call has come to a premature end (see Section 5.6.6 for
6025 * full details on rx EndCall() and the meaning of its return value).
6027 * The next client-side stub appearing in this generated file handles the
6028 * delivery of the IN parameters for StartRXDEMO Getfile(). It operates
6029 * identically as the RXDEMO Add() stub routine in this respect, except that it
6030 * does not attempt to retrieve the OUT parameter. Since this is a streamed
6031 * call, the number of bytes that will be placed on the Rx stream cannot be
6032 * determined at compile time, and must be handled explicitly by rxdemo
6036 * int StartRXDEMO_Getfile(z_call, a_nameToRead)
6037 * register struct rx_call *z_call;
6038 * char * a_nameToRead;
6040 * static int z_op = 2;
6043 * xdrrx_create(&z_xdrs, z_call, XDR_ENCODE);
6044 * /* Marshal the arguments */
6045 * if ((!xdr_int(&z_xdrs, &z_op)) || (!xdr_string(&z_xdrs, &a_nameToRead,
6046 * RXDEMO_NAME_MAX_CHARS))) {
6047 * z_result = RXGEN_CC_MARSHAL;
6050 * z_result = RXGEN_SUCCESS;
6051 * fail: return z_result;
6056 * The final stub routine appearing in this generated file, EndRXDEMO
6057 * Getfile(), handles the case where rxdemo client.c has already successfully
6058 * recovered the unbounded streamed data appearing on the call, and then simply
6059 * has to fetch the OUT parameter. This routine behaves identially to the
6060 * latter portion of RXDEMO Getfile().
6063 * int EndRXDEMO_Getfile(z_call, a_result)
6064 * register struct rx_call *z_call;
6069 * /* Un-marshal the reply arguments */
6070 * xdrrx_create(&z_xdrs, z_call, XDR_DECODE);
6071 * if ((!xdr_int(&z_xdrs, a_result))) {
6072 * z_result = RXGEN_CC_UNMARSHAL;
6075 * z_result = RXGEN_SUCCESS; fail:
6080 * \subsection sec6-3-2 Server-Side Routines: rxdemo.ss.c
6083 * This generated file provides the core components required to implement the
6084 * server side of the rxdemo RPC service. Included in this file is the
6085 * generated dispatcher routine, RXDEMO ExecuteRequest(), which the rx
6086 * NewService() invocation in rxdemo server.c uses to construct the body of
6087 * each listener thread's loop. Also included are the server-side stubs to
6088 * handle marshalling and unmarshalling of parameters for each defined RPC call
6089 * (i.e., RXDEMO Add() and RXDEMO Getfile()). These stubs are called by RXDEMO
6090 * ExecuteRequest(). The routine to be called by RXDEMO ExecuteRequest()
6091 * depends on the opcode received, which appears as the very first longword in
6094 * As usual, the first fragment is copyright information followed by the body
6095 * of the definitions from the interface file.
6098 * /*======================================================================%
6099 * % Edward R. Zayas % % Transarc Corporation % % % % % % The United States
6100 * Government has rights in this work pursuant % % to contract no.
6101 * MDA972-90-C-0036 between the United States Defense % % Advanced Research
6102 * Projects Agency and Transarc Corporation. % % % % (C) Copyright 1991
6103 * Transarc Corporation % % % % Redistribution and use in source and binary
6104 * forms are permitted % % provided that: (1) source distributions retain
6105 * this entire copy¬% % right notice and comment, and (2) distributions
6106 * including binaries %
6107 * %====================================================================== */
6108 * /* Machine generated file --Do NOT edit */
6110 * #include "rxdemo.h"
6111 * #include <rx/rx.h>
6112 * #include <rx/rx_null.h>
6113 * #define RXDEMO_SERVER_PORT 8000 /* Service port to advertise */
6114 * #define RXDEMO_SERVICE_PORT 0 /* User server's port */
6115 * #define RXDEMO_SERVICE_ID 4 /* Service ID */
6116 * #define RXDEMO_NULL_SECOBJ_IDX 0 /* Index of null security object */
6117 * #define RXDEMO_MAX 3
6118 * #define RXDEMO_MIN 2
6119 * #define RXDEMO_NULL 0
6120 * #define RXDEMO_NAME_MAX_CHARS 64
6121 * #define RXDEMO_BUFF_BYTES 512
6122 * #define RXDEMO_CODE_SUCCESS 0
6123 * #define RXDEMO_CODE_CANT_OPEN 1
6124 * #define RXDEMO_CODE_CANT_STAT 2
6125 * #define RXDEMO_CODE_CANT_READ 3
6126 * #define RXDEMO_CODE_WRITE_ERROR 4
6130 * After this preamble, the first server-side stub appears. This RXDEMO Add()
6131 * routine is basically the inverse of the RXDEMO Add() client-side stub
6132 * defined in rxdemo.cs.c. Its job is to unmarshall the IN parameters for the
6133 * call, invoke the "true" server-side RXDEMO Add() routine (defined in rxdemo
6134 * server.c), and then package and ship the OUT parameter. Being so similar to
6135 * the client-side RXDEMO Add(), no further discussion is offered here.
6138 * long _RXDEMO_Add(z_call, z_xdrs)
6139 * struct rx_call *z_call;
6145 * if ((!xdr_int(z_xdrs, &a)) || (!xdr_int(z_xdrs, &b)))
6147 * z_result = RXGEN_SS_UNMARSHAL;
6150 * z_result = RXDEMO_Add(z_call, a, b, &result);
6151 * z_xdrs->x_op = XDR_ENCODE;
6152 * if ((!xdr_int(z_xdrs, &result)))
6153 * z_result = RXGEN_SS_MARSHAL;
6154 * fail: return z_result;
6159 * The second server-side stub, RXDEMO Getfile(), appears next. It operates
6160 * identically to RXDEMO Add(), first unmarshalling the IN arguments, then
6161 * invoking the routine that actually performs the server-side work for the
6162 * call, then finishing up by returning the OUT parameters.
6165 * long _RXDEMO_Getfile(z_call, z_xdrs)
6166 * struct rx_call *z_call;
6170 * char * a_nameToRead=(char *)0;
6172 * if ((!xdr_string(z_xdrs, &a_nameToRead, RXDEMO_NAME_MAX_CHARS))) {
6173 * z_result = RXGEN_SS_UNMARSHAL;
6176 * z_result = RXDEMO_Getfile(z_call, a_nameToRead, &a_result);
6177 * z_xdrs->x_op = XDR_ENCODE;
6178 * if ((!xdr_int(z_xdrs, &a_result)))
6179 * z_result = RXGEN_SS_MARSHAL;
6180 * fail: z_xdrs->x_op = XDR_FREE;
6181 * if (!xdr_string(z_xdrs, &a_nameToRead, RXDEMO_NAME_MAX_CHARS))
6184 * fail1: return RXGEN_SS_XDRFREE;
6189 * The next portion of the automatically generated server-side module sets up
6190 * the dispatcher routine for incoming Rx calls. The above stub routines are
6191 * placed into an array in opcode order.
6194 * long _RXDEMO_Add();
6195 * long _RXDEMO_Getfile();
6196 * static long (*StubProcsArray0[])() = {_RXDEMO_Add, _RXDEMO_Getfile};
6200 * The dispatcher routine itself, RXDEMO ExecuteRequest, appears next. This is
6201 * the function provided to the rx NewService() call in rxdemo server.c, and it
6202 * is used as the body of each listener thread's service loop. When activated,
6203 * it decodes the first longword in the given Rx call, which contains the
6204 * opcode. It then dispatches the call based on this opcode, invoking the
6205 * appropriate server-side stub as organized in the StubProcsArray.
6208 * RXDEMO_ExecuteRequest(z_call)
6209 * register struct rx_call *z_call;
6214 * xdrrx_create(&z_xdrs, z_call, XDR_DECODE);
6215 * if (!xdr_int(&z_xdrs, &op))
6216 * z_result = RXGEN_DECODE;
6217 * else if (op < RXDEMO_LOWEST_OPCODE || op > RXDEMO_HIGHEST_OPCODE)
6218 * z_result = RXGEN_OPCODE;
6220 * z_result = (*StubProcsArray0[op -RXDEMO_LOWEST_OPCODE])(z_call,
6226 * \subsection sec6-3-3 External Data Rep file: rxdemo.xdr.c
6229 * This file is created to provide the special routines needed to map any
6230 * user-defined structures appearing as Rx arguments into and out of network
6231 * byte order. Again, all on-thewire data appears in network byte order,
6232 * insuring proper communication between servers and clients with different
6233 * memory organizations.
6235 * Since the rxdemo example application does not define any special structures
6236 * to pass as arguments in its calls, this generated file contains only the set
6237 * of definitions appearing in the interface file. In general, though, should
6238 * the user define a struct xyz and use it as a parameter to an RPC function,
6239 * this file would contain a routine named xdr xyz(), which converted the
6240 * structure field-by-field to and from network byte order.
6243 * /*======================================================================%
6244 * %% % in the documentation or other materials mentioning features or % %
6245 * use of this software. Neither the name of Transarc nor the names % % of
6246 * its contributors may be used to endorse or promote products % % derived
6247 * from this software without specific prior written % % permission. % % %
6248 * % THIS SOFTWARE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED %
6249 * % WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF %
6250 * % MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. %
6251 * % Edward R. Zayas % Transarc Corporation % % % The United States
6252 * Government has rights in this work pursuant to contract no.
6253 * MDA972-90-C-0036 between the United States Defense % Advanced Research
6254 * Projects Agency and Transarc Corporation. % % (C) Copyright 1991 Transarc
6255 * Corporation % % Redistribution and use in source and binary forms are
6256 * permitted % % provided that: (1) source distributions retain this entire
6257 * copy¬ % right notice and comment, and (2) distributions including binaries
6258 * % % display the following acknowledgement: % % % % ``This product includes
6259 * software developed by Transarc % % Corporation and its contributors'' %
6260 * %====================================================================== */
6261 * /* Machine generated file --Do NOT edit */
6263 * #include "rxdemo.h"
6264 * #include <rx/rx.h>
6265 * #include <rx/rx_null.h>
6266 * #define RXDEMO_SERVER_PORT 8000 /* Service port to advertise */
6267 * #define RXDEMO_SERVICE_PORT 0 /* User server's port */
6268 * #define RXDEMO_SERVICE_ID 4 /* Service ID */
6269 * #define RXDEMO_NULL_SECOBJ_IDX 0 /* Index of null security object */
6270 * #define RXDEMO_MAX 3
6271 * #define RXDEMO_MIN 2
6272 * #define RXDEMO_NULL 0
6273 * #define RXDEMO_NAME_MAX_CHARS 64
6274 * #define RXDEMO_BUFF_BYTES 512
6275 * #define RXDEMO_CODE_SUCCESS 0
6276 * #define RXDEMO_CODE_CANT_OPEN 1
6277 * #define RXDEMO_CODE_CANT_STAT 2
6278 * #define RXDEMO_CODE_CANT_READ 3
6279 * #define RXDEMO_CODE_WRITE_ERROR 4
6282 * \section sec6-4 Section 6.4: Sample Output
6285 * This section contains the output generated by running the example rxdemo
6286 * server and rxdemo client programs described above. The server end was run on
6287 * a machine named Apollo, and the client program was run on a machine named
6290 * The server program on Apollo was started as follows:
6291 * \li apollo: rxdemo_server
6292 * \li rxdemo_server: Example Rx server process
6293 * \li Listening on UDP port 8000
6295 * At this point, rxdemo server has initialized its Rx module and started up
6296 * its listener LWPs, which are sleeping on the arrival of an RPC from any
6299 * The client portion was then started on Bigtime:
6300 * \n bigtime: rxdemo_client apollo
6301 * \n rxdemo: Example Rx client process
6302 * \n Connecting to Rx server on 'apollo', IP address 0x1acf37c0, UDP port 8000
6303 * \n ---> Connected. Asking server to add 1 and 2: Reported sum is 3
6305 * The command line instructs rxdemo client to connect to the rxdemo server on
6306 * host apollo and to use the standard port defined for this service. It
6307 * reports on the successful Rx connection establishment, and immediately
6308 * executes an rxdemo Add(1, 2) RPC. It reports that the sum was successfully
6309 * received. When the RPC request arrived at the server and was dispatched by
6310 * the rxdemo server code, it printed out the following line:
6311 * \n [Handling call to RXDEMO_Add(1, 2)]
6313 * Next, rxdemo client prompts for the name of the file to read from the rxdemo
6314 * server. It is told to fetch the Makefile for the Rx demo directory. The
6315 * server is executing in the same directory in which it was compiled, so an
6316 * absolute name for the Makefile is not required. The client echoes the
6318 * \n Name of file to read from server: Makefile Setting up an Rx call for
6319 * RXDEMO_Getfile...done
6321 * As with the rxdemo Add() call, rxdemo server receives this RPC, and prints
6322 * out the following information:
6323 * \li [Handling call to RXDEMO_Getfile(Makefile)]
6325 * \li [file has 2450 bytes]
6328 * It successfully opens the named file, and reports on its size in bytes. The
6329 * rxdemo server program then executes the streamed portion of the rxdemo
6330 * Getfile call, and when complete, indicates that the file has been closed.
6331 * Meanwhile, rxdemo client prints out the reported size of the file, follows
6332 * it with the file's contents, then advises that the test run has completed:
6335 * [file contents (2450 bytes) fetched over the Rx call appear below]
6337 * /*#=======================================================================#
6338 * # The United States Government has rights in this work pursuant # # to
6339 * contract no. MDA972-90-C-0036 between the United States Defense # # Advanced
6340 * Research Projects Agency and Transarc Corporation. # # # # (C) Copyright
6341 * 1991 Transarc Corporation # # # # Redistribution and use in source and
6342 * binary forms are permitted # # provided that: (1) source distributions
6343 * retain this entire copy-# # right notice and comment, and (2) distributions
6344 * including binaries # # display the following acknowledgement: # # # # ''This
6345 * product includes software developed by Transarc # # Corporation and its
6346 * contributors'' # # # # in the documentation or other materials mentioning
6347 * features or # # use of this software. Neither the name of Transarc nor the
6348 * names # # of its contributors may be used to endorse or promote products #
6349 * # derived from this software without specific prior written # # permission.
6350 * # # # # THIS SOFTWARE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED
6351 * # # WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF # #
6352 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. #
6353 * #=======================================================================# */
6356 * TOOL_CELL = grand.central.org
6357 * AFS_INCLIB_CELL = transarc.com
6358 * USR_CONTRIB = /afs/${TOOL_CELL}/darpa/usr/contrib/
6359 * PROJ_DIR = ${USR_CONTRIB}.site/grand.central.org/rxdemo/
6360 * AFS_INCLIB_DIR = /afs/${AFS_INCLIB_CELL}/afs/dest/
6361 * RXGEN = ${AFS_INCLIB_DIR}bin/rxgen
6362 * INSTALL = ${AFS_INCLIB_DIR}bin/install
6363 * LIBS = ${AFS_INCLIB_DIR}lib/librx.a \ ${AFS_INCLIB_DIR}lib/liblwp.a
6366 * -I${AFS_INCLIB_DIR}include \
6367 * -I${AFS_INCLIB_DIR}include/afs \
6368 * -I${AFS_INCLIB_DIR} \
6374 * ${INSTALL} rxdemo_client ${PROJ_DIR}bin
6375 * ${INSTALL} rxdemo_server ${PROJ_DIR}bin
6377 * all: rxdemo_client rxdemo_server
6379 * rxdemo_client: rxdemo_client.o ${LIBS} rxdemo.cs.o ${CC} ${CFLAGS}
6380 * -o rxdemo_client rxdemo_client.o rxdemo.cs.o ${LIBS}
6382 * rxdemo_server: rxdemo_server.o rxdemo.ss.o ${LIBS} ${CC} ${CFLAGS}
6383 * -o rxdemo_server rxdemo_server.o rxdemo.ss.o ${LIBS}
6385 * rxdemo_client.o: rxdemo.h
6387 * rxdemo_server.o: rxdemo.h
6389 * rxdemo.cs.c rxdemo.ss.c rxdemo.er.c rxdemo.h: rxdemo.xg rxgen rxdemo.xg
6391 * clean: rm -f *.o rxdemo.cs.c rxdemo.ss.c rxdemo.xdr.c rxdemo.h \
6392 * rxdemo_client rxdemo_server core
6394 * [End of file data]
6399 * The rxdemo server program continues to run after handling these calls,
6400 * offering its services to any other callers. It can be killed by sending it
6401 * an interrupt signal using Control-C (or whatever mapping has been set up for
6402 * the shell's interrupt character).
6404 * \section Bibliography Bibliography
6406 * \li [1] Transarc Corporation. AFS 3.0 System Administrator's Guide,
6407 * F-30-0-D102, Pittsburgh, PA, April 1990.
6408 * \li [2] S.P. Miller, B.C. Neuman, J.I. Schiller, J.H. Saltzer. Kerberos
6409 * Authentication and Authorization System, Project Athena Technical Plan,
6410 * Section E.2.1, M.I.T., December 1987.
6411 * \li [3] Bill Bryant. Designing an Authentication System: a Dialogue
6412 * in Four Scenes, Project Athena internal document, M.I.T, draft of 8 February
6414 * \li [4] S. R. Kleinman. Vnodes: An Architecture for Multiple file
6415 * System Types in Sun UNIX, Conference Proceedings, 1986 Summer Usenix
6416 * Technical Conference, pp. 238-247, El Toro, CA, 1986.