ubik: Log sync site for SDISK_SendFile USYNC error

[openafs.git] / src / butc / dump.c

/*
 * Copyright 2000, International Business Machines Corporation and others.
 * All Rights Reserved.
 *
 * This software has been released under the terms of the IBM Public
 * License.  For details, see the LICENSE file in the top-level source
 * directory or online at http://www.openafs.org/dl/license10.html
 */

#include <afsconfig.h>
#include <afs/param.h>

#include <roken.h>

#include <rx/xdr.h>
#include <rx/rx.h>
#include <lwp.h>
#include <lock.h>
#include <afs/tcdata.h>
#include <afs/bubasics.h>
#include <afs/budb_client.h>
#include <afs/butm_prototypes.h>
#include <afs/vldbint.h>
#include <afs/ktime.h>
#include <afs/vlserver.h>
#include <afs/afsint.h>
#include <afs/volser.h>
#include <afs/volser_prototypes.h>
#include <afs/volint.h>
#include <afs/cellconfig.h>
#include <afs/bucoord_prototypes.h>

#include "butc_internal.h"
#include "error_macros.h"
#include "butc_xbsa.h"
#include "afs/butx.h"

/* GLOBAL CONFIGURATION PARAMETERS */
extern int dump_namecheck;
extern int queryoperator;
extern int isafile;
extern int forcemultiple;

extern struct ubik_client *cstruct;
dlqlinkT savedEntries;
dlqlinkT entries_to_flush;

extern afs_int32 groupId;
extern afs_int32 BufferSize;
extern afs_int32 statusSize;
extern FILE *centralLogIO;
afs_int32 lastPass = 0;
#ifdef xbsa
extern afs_int32 xbsaType;
char *butcdumpIdStr = "/backup_afs_volume_dumps";
extern struct butx_transactionInfo butxInfo;
extern char *xbsaObjectOwner;
extern char *appObjectOwner;
extern char *xbsaSecToken;
extern char *xbsalGName;
extern char *globalButcLog;
#endif /*xbsa */

afs_int32 dataSize;             /* Size of data to read on each rx_Read() call */
afs_int32 tapeblocks;           /* Number of 16K tape datablocks in buffer (!CONF_XBSA) */

/* TBD
 *
 * Done 1) dump id generation
 * Done xx) volume fragment number accounting !!  I think.
 * 2) check abort - check after subroutine calls
 * Done 3) trailer anomaly
 * 4) trailer damage indicator after partial dumps ( affects scandump )
 * Done 5) Ensure mount failure logged
 * 6) Ensure bucoord status calls work
 *
 * notes
 * pass 3:
 *      keep token timeout. If no user reponse (idle time > some period)
 *      and tokens about to time out, terminate dump. This provides at
 *      least something usable.
 */

#define DUMPNAME(dumpname, name, dbDumpId) \
   if (dbDumpId == 0) \
     sprintf(dumpname, "%s", name); \
   else \
     sprintf(dumpname, "%s (DumpId %u)", name, dbDumpId);

struct dumpRock {
    /* status only */
    int tapeSeq;
    int curVolume;              /* index in dumpNode of volume */
    int curVolumeStatus;        /* more explicit dump state */
    afs_uint32 curVolStartPos;  /* Starting position of the current volume */
    afs_uint32 databaseDumpId;  /* real dump id, for db */
    afs_uint32 initialDumpId;   /* the initial dump, for appended dumps */
    afs_int32 volumesDumped;    /* # volumes successfully dumped */
    afs_int32 volumesFailed;    /* # volumes that failed to dump */
    afs_int32 volumesNotDumped; /* # volumes that were not dumped (didn't fail) */

    /* tape management */
    char tapeName[TC_MAXTAPENAMELEN];
    struct butm_tapeInfo *tapeInfoPtr;
    struct butm_tapeLabel tapeLabel;
    int wroteLabel;             /* If the tape label is written */

    /* database information */
    struct budb_dumpEntry lastDump;     /* the last dump of this volset */
    struct budb_dumpEntry dump; /* current dump */
    struct budb_tapeEntry tape; /* current tape, not used -VA */

    /* links to existing info */
    struct dumpNode *node;
};

/* Forward declarations */

int makeVolumeHeader(struct volumeHeader *, struct dumpRock *, int);
int volumeHeader_hton(struct volumeHeader *, struct volumeHeader *);
char retryPrompt(char *, afs_int32, afs_uint32);
int getDumpTape(struct dumpRock *, int, afs_int32);
int getXBSATape(struct dumpRock *);
afs_int32 createDump(struct dumpRock *);

/* configuration variables */
#define HITEOT(code) ((code == BUTM_IO) || (code == BUTM_EOT) || (code == BUTM_IOCTL))
extern int autoQuery;
extern int maxpass;

afs_int32 tc_EndMargin;
afs_int32 tc_KEndMargin;
static char *bufferBlock;

/* compute the absolute expiration date */
afs_int32
calcExpirationDate(afs_int32 expType, afs_int32 expDate, afs_int32 createTime)
{
    struct ktime_date kd;

    switch (expType) {
    case BC_REL_EXPDATE:
        /* expiration date is relative to the creation time of the dump.
         * This is the only case that requires any work
         */
        Int32To_ktimeRelDate(expDate, &kd);
        return (Add_RelDate_to_Time(&kd, createTime));

    case BC_ABS_EXPDATE:
        return (expDate);

    case BC_NO_EXPDATE:
    default:
        return (0);
    }
}

afs_uint32 curr_bserver = 0;
struct rx_connection *curr_fromconn = (struct rx_connection *)0;

struct rx_connection *
Bind(afs_uint32 server)
{
    if (curr_fromconn) {
        if (curr_bserver == server)     /* Keep connection if have it */
            return (curr_fromconn);

        rx_DestroyConnection(curr_fromconn);    /* Otherwise get rid of it */
        curr_fromconn = (struct rx_connection *)0;
        curr_bserver = 0;
    }

    if (server) {
        curr_fromconn = UV_Bind(server, AFSCONF_VOLUMEPORT);    /* Establish new connection */
        if (curr_fromconn)
            curr_bserver = server;
    }

    return (curr_fromconn);
}

/* notes
 * 1) save the chunksize or otherwise ensure tape space remaining is
 *      check frequently enough
 * 2) This is called once. For partial dumps, need to
 *      ensure that the tape device is left in the correct state for
 *      further dumps.
 *
 */
#define BIGCHUNK 102400

afs_int32
dumpVolume(struct tc_dumpDesc * curDump, struct dumpRock * dparamsPtr)
{
    struct butm_tapeInfo *tapeInfoPtr = dparamsPtr->tapeInfoPtr;
    struct dumpNode *nodePtr = dparamsPtr->node;
    afs_int32 taskId = nodePtr->taskID;
    char *buffer;
    int fragmentNumber;
    afs_int32 volumeFlags;
    afs_int32 kRemaining;
    afs_int32 rc, code = 0;
    afs_int32 toread;
    afs_uint32 volBytesRead;
    afs_uint32 chunkSize;
    afs_int32 bytesread;        /* rx reads */
    int endofvolume = 0;        /* Have we read all volume data */
    int indump = 0;
    int fragmentvolume;
    struct volumeHeader hostVolumeHeader;

    struct rx_call *fromcall = (struct rx_call *)0;
    struct rx_connection *fromconn;
    afs_int32 updatedate, fromtid = 0;
    volEntries volumeInfo;
    afs_int32 bytesWritten;
    afs_uint32 statuscount = statusSize, tsize = 0;

    dparamsPtr->curVolumeStatus = DUMP_NOTHING;

    fromconn = Bind(htonl(curDump->hostAddr));  /* get connection to the server */

    /* Determine when the volume was last cloned and updated */
    volumeInfo.volEntries_val = (volintInfo *) 0;
    volumeInfo.volEntries_len = 0;
    rc = AFSVolListOneVolume(fromconn, curDump->partition, curDump->vid,
                             &volumeInfo);
    if (rc)
        ERROR_EXIT(rc);
    updatedate = volumeInfo.volEntries_val[0].updateDate;
    curDump->cloneDate =
        ((curDump->vtype ==
          RWVOL) ? time(0) : volumeInfo.volEntries_val[0].creationDate);

    if (curDump->date >= curDump->cloneDate)
        ERROR_EXIT(0);          /* not recloned since last dump */
    if (curDump->date > updatedate) {
        dparamsPtr->curVolumeStatus = DUMP_NODUMP;      /* not modified since last dump */
        ERROR_EXIT(0);
    }

    /* Start the volserver transaction and dump */
    rc = AFSVolTransCreate(fromconn, curDump->vid, curDump->partition, ITBusy,
                           &fromtid);
    if (rc)
        ERROR_EXIT(rc);
    fromcall = rx_NewCall(fromconn);

    rc = StartAFSVolDump(fromcall, fromtid, curDump->date);
    if (rc)
        ERROR_EXIT(rc);

    dparamsPtr->curVolumeStatus = DUMP_PARTIAL;
    dparamsPtr->curVolStartPos = tapeInfoPtr->position;

    /* buffer is place in bufferBlock to write volume data.
     * butm_writeFileData() assumes the previous BUTM_HDRSIZE bytes
     * is available to write the tape block header.
     */
    buffer = bufferBlock + BUTM_HDRSIZE;

    /* Dump one volume fragment at a time until we dump the full volume.
     * A volume with more than 1 fragment means the volume will 'span'
     * 2 or more tapes.
     */
    for (fragmentNumber = 1; !endofvolume; fragmentNumber++) {  /*frag */
        rc = butm_WriteFileBegin(tapeInfoPtr);
        if (rc) {
            ErrorLog(1, taskId, rc, tapeInfoPtr->error,
                     "Can't write FileBegin on tape\n");
            ERROR_EXIT(rc);
        }
        indump = 1;             /* first write to tape */

        /* Create and Write the volume header */
        makeVolumeHeader(&hostVolumeHeader, dparamsPtr, fragmentNumber);
        hostVolumeHeader.contd = ((fragmentNumber == 1) ? 0 : TC_VOLCONTD);
        volumeHeader_hton(&hostVolumeHeader, (struct volumeHeader *)buffer);

        rc = butm_WriteFileData(tapeInfoPtr, buffer, 1,
                                sizeof(hostVolumeHeader));
        if (rc) {
            ErrorLog(1, taskId, rc, tapeInfoPtr->error,
                     "Can't write VolumeHeader on tape\n");
            ERROR_EXIT(rc);
        }

        bytesWritten = BUTM_BLOCKSIZE;  /* Wrote one tapeblock */
        tsize += bytesWritten;

        /* Start reading volume data, rx_Read(), and dumping to the tape
         * until we've dumped the entire volume (endofvolume == 1). We can
         * exit this loop early if we find we are close to the end of the
         * tape; in which case we dump the next fragment on the next tape.
         */
        volBytesRead = 0;
        chunkSize = 0;
        fragmentvolume = 0;
        while (!endofvolume && !fragmentvolume) {       /*w */
            /* Check for abort in the middle of writing data */
            if (volBytesRead >= chunkSize) {
                chunkSize += BIGCHUNK;
                if (checkAbortByTaskId(taskId))
                    ABORT_EXIT(TC_ABORTEDBYREQUEST);

                /* set bytes dumped for backup */
                lock_Status();
                nodePtr->statusNodePtr->nKBytes = tapeInfoPtr->kBytes;
                unlock_Status();
            }

            /* Determine how much data to read in upcoming RX_Read() call */
            toread = dataSize;
            /* Check if we are close to the EOT. There should at least be some
             * data on the tape before it is switched. HACK: we have to split a
             * volume across tapes because the volume trailer says the dump
             * continues on the next tape (and not the filemark). This could
             * result in a volume starting on one tape (no volume data dumped) and
             * continued on the next tape. It'll work, just requires restore to
             * switch tapes. This allows many small volumes (<16K) to be dumped.
             */
            kRemaining = butm_remainingKSpace(tapeInfoPtr);
            if ((kRemaining < tc_KEndMargin)
                && (volBytesRead
                    || (tapeInfoPtr->position > (isafile ? 3 : 2)))) {
                fragmentvolume = 1;
            }


            /* Guess at how much data to read. So we don't write off end of tape */
            if (kRemaining < (tapeblocks * 16)) {
                if (kRemaining < 0) {
                    toread = BUTM_BLKSIZE;
                } else {
                    toread = ((kRemaining / 16) + 1) * BUTM_BLKSIZE;
                    if (toread > dataSize)
                        toread = dataSize;
                }
            }

#ifdef xbsa
            /* Set aside space for the trailing volume header when using large buffers. */
            if (XBSAMAXBUFFER < toread + sizeof(hostVolumeHeader)) {
                toread = XBSAMAXBUFFER - sizeof(hostVolumeHeader);
            }
#endif

            /* Read some volume data. */
            if (fragmentvolume) {
                bytesread = 0;
            } else {
                bytesread = rx_Read(fromcall, buffer, toread);
                volBytesRead += bytesread;
                if (bytesread != toread) {
                    /* Make sure were at end of volume and not a communication error */
                    rc = rx_Error(fromcall);
                    if (rc)
                        ERROR_EXIT(rc);
                    endofvolume = 1;
                }
            }

            if (fragmentvolume || endofvolume) {
                /* Create a volume trailer appending it to this data block */
                makeVolumeHeader(&hostVolumeHeader, dparamsPtr,
                                 fragmentNumber);
                hostVolumeHeader.contd = (endofvolume ? 0 : TC_VOLCONTD);
                hostVolumeHeader.magic = TC_VOLENDMAGIC;
                hostVolumeHeader.endTime = (endofvolume ? time(0) : 0);
                volumeHeader_hton(&hostVolumeHeader, (struct volumeHeader *)&buffer[bytesread]);
                bytesread += sizeof(hostVolumeHeader);
            }

            /* Write the datablock out */
            /* full data buffer - write it to tape */
            rc = butm_WriteFileData(tapeInfoPtr, buffer, tapeblocks,
                                    bytesread);
            if (rc) {
                ErrorLog(1, taskId, rc, tapeInfoPtr->error,
                         "Can't write VolumeData on tape\n");
                ERROR_EXIT(rc);
            }
            bytesWritten = tapeblocks * BUTM_BLOCKSIZE;
            tsize += bytesWritten;

            /* Display a status line every statusSize or at end of volume */
            if (statusSize
                && ((tsize >= statuscount) || endofvolume
                    || fragmentvolume)) {
                time_t t = time(0);
                struct tm tm;
                localtime_r(&t, &tm);
                printf("%02d:%02d:%02d: Task %u: %u KB: %s: %u B\n",
                       tm.tm_hour, tm.tm_min, tm.tm_sec, taskId,
                       tapeInfoPtr->kBytes, hostVolumeHeader.volumeName,
                       tsize);
                statuscount = tsize + statusSize;
            }
        }                       /*w */

        /* End the dump before recording it in BUDB as successfully dumped */
        rc = butm_WriteFileEnd(tapeInfoPtr);
        indump = 0;
        if (rc) {
            ErrorLog(1, taskId, rc, tapeInfoPtr->error,
                     "Can't write FileEnd on tape\n");
            ERROR_EXIT(rc);
        }

        /* Record in BUDB the volume fragment as succcessfully dumped */
        volumeFlags = ((fragmentNumber == 1) ? BUDB_VOL_FIRSTFRAG : 0);
        if (endofvolume)
            volumeFlags |= BUDB_VOL_LASTFRAG;
        rc = addVolume(0, dparamsPtr->databaseDumpId, dparamsPtr->tapeName,
                       nodePtr->dumps[dparamsPtr->curVolume].name,
                       nodePtr->dumps[dparamsPtr->curVolume].vid,
                       nodePtr->dumps[dparamsPtr->curVolume].cloneDate,
                       dparamsPtr->curVolStartPos, volBytesRead,
                       (fragmentNumber - 1), volumeFlags);
        if (rc)
            ABORT_EXIT(rc);

        /* If haven't finished dumping the volume, end this
         * tape and get the next tape.
         */
        if (!endofvolume) {
            /* Write an EOT marker.
             * Log the error but ignore it since the dump is effectively done.
             * Scantape will detect continued volume and not read the EOT.
             */
            rc = butm_WriteEOT(tapeInfoPtr);
            if (rc)
                TapeLog(1, taskId, rc, tapeInfoPtr->error,
                        "Warning: Can't write End-Of-Dump on tape\n");

            /* Unmount the tape */
            unmountTape(taskId, tapeInfoPtr);

            /* Tell the database the tape is complete (and ok) */
            rc = finishTape(&dparamsPtr->tape,
                            dparamsPtr->tapeInfoPtr->kBytes +
                            (dparamsPtr->tapeInfoPtr->nBytes ? 1 : 0));
            if (rc)
                ABORT_EXIT(rc);

            /* get the next tape. Prompt, mount, and add it into the database */
            dparamsPtr->tapeSeq++;
            rc = getDumpTape(dparamsPtr, 1, 0); /* interactive - no append */
            if (rc)
                ABORT_EXIT(rc);

            dparamsPtr->curVolStartPos = tapeInfoPtr->position;
        }
    }                           /*frag */

    dparamsPtr->curVolumeStatus = DUMP_SUCCESS;

  error_exit:
    /*
     * If we hit the end, see if this is the first volume on the tape or not.
     * Also, mark the tape as finished if the tape contains other dumps.
     */
    if (!code)
        code = rc;
    if (HITEOT(code)) {
        ErrorLog(2, taskId, code, tapeInfoPtr->error,
                 "Warning: Dump (%s) hit end-of-tape inferred\n",
                 nodePtr->dumpSetName);

        if (tapeInfoPtr->position == 2) {
            dparamsPtr->curVolumeStatus = DUMP_NORETRYEOT;
        } else {
            dparamsPtr->curVolumeStatus = DUMP_RETRY;
            rc = finishTape(&dparamsPtr->tape,
                            dparamsPtr->tapeInfoPtr->kBytes +
                            (dparamsPtr->tapeInfoPtr->nBytes ? 1 : 0));
            if (rc)
                ABORT_EXIT(rc);
        }
    }

    /*
     * This is used when an error occurs part way into a volume dump. Clean
     * the tape state by writing an FileEnd mark. Forgo this action if we hit
     * the end of tape.
     */
    else if (indump) {
        rc = butm_WriteFileEnd(tapeInfoPtr);
        indump = 0;
        if (rc) {
            ErrorLog(1, taskId, rc, tapeInfoPtr->error,
                     "Can't write FileEnd on tape\n");
        }
    }

    if (fromcall) {
        rc = rx_EndCall(fromcall, 0);
        if (!code)
            code = rc;
    }

    if (fromtid) {
        afs_int32 rcode;
        rc = AFSVolEndTrans(fromconn, fromtid, &rcode);
        if (!code)
            code = (rc ? rc : rcode);
    }

    return (code);

  abort_exit:
    dparamsPtr->curVolumeStatus = DUMP_FAILED;
    ERROR_EXIT(code);
}

afs_int32
xbsaDumpVolume(struct tc_dumpDesc * curDump, struct dumpRock * dparamsPtr)
{
#ifdef xbsa
    struct butm_tapeInfo *tapeInfoPtr = dparamsPtr->tapeInfoPtr;
    struct dumpNode *nodePtr = dparamsPtr->node;
    char *buffer = bufferBlock;
    afs_int32 taskId = nodePtr->taskID;
    afs_int32 rc, code = 0;
    afs_int32 toread;
    afs_uint32 volBytesRead;
    afs_uint32 chunkSize;
    afs_int32 bytesread;        /* rx reads */
    int endofvolume = 0;        /* Have we read all volume data */
    int begindump = 0, indump = 0;      /* if dump transaction started; if dumping data */
    struct volumeHeader hostVolumeHeader;

    struct rx_call *fromcall = (struct rx_call *)0;
    struct rx_connection *fromconn;
    afs_int32 updatedate, fromtid = 0;
    volEntries volumeInfo;
    afs_int32 bytesWritten;
    afs_uint32 statuscount = statusSize, tsize = 0, esize;
    afs_hyper_t estSize;

    char dumpIdStr[XBSA_MAX_OSNAME];
    char volumeNameStr[XBSA_MAX_PATHNAME];
    static char *dumpDescription = "AFS volume dump";
    static char *objectDescription = "XBSA - butc";

    dparamsPtr->curVolumeStatus = DUMP_NOTHING;

    fromconn = Bind(htonl(curDump->hostAddr));  /* get connection to the server */

    /* Determine when the volume was last cloned and updated */
    volumeInfo.volEntries_val = (volintInfo *) 0;
    volumeInfo.volEntries_len = 0;
    rc = AFSVolListOneVolume(fromconn, curDump->partition, curDump->vid,
                             &volumeInfo);
    if (rc)
        ERROR_EXIT(rc);
    updatedate = volumeInfo.volEntries_val[0].updateDate;
    curDump->cloneDate =
        ((curDump->vtype ==
          RWVOL) ? time(0) : volumeInfo.volEntries_val[0].creationDate);

    /* Get the volume size (in KB) and increase by 25%. Then set as a hyper */
    esize = volumeInfo.volEntries_val[0].size;
    esize += (esize / 4) + 1;

    if (curDump->date >= curDump->cloneDate)
        ERROR_EXIT(0);          /* not recloned since last dump */
    if (curDump->date > updatedate) {
        dparamsPtr->curVolumeStatus = DUMP_NODUMP;      /* not modified since last dump */
        ERROR_EXIT(0);
    }

    /* Start a new XBSA Transaction */
    rc = xbsa_BeginTrans(&butxInfo);
    if (rc != XBSA_SUCCESS) {
        ErrorLog(1, taskId, rc, 0, "Unable to create a new transaction\n");
        ERROR_EXIT(rc);
    }
    begindump = 1;              /* Will need to do an xbsa_EndTrans */

    /* Start the volserver transaction and dump. Once started, the
     * volume status is "partial dump". Also, the transaction with
     * the volserver is idle until the first read. An idle transaction
     * will time out in 600 seconds. After the first rx_Read,
     * the transaction is not idle. See GCTrans().
     */
    rc = AFSVolTransCreate(fromconn, curDump->vid, curDump->partition, ITBusy,
                           &fromtid);
    if (rc)
        ERROR_EXIT(rc);
    fromcall = rx_NewCall(fromconn);

    rc = StartAFSVolDump(fromcall, fromtid, curDump->date);
    if (rc)
        ERROR_EXIT(rc);

    dparamsPtr->curVolumeStatus = DUMP_PARTIAL;
    dparamsPtr->curVolStartPos = tapeInfoPtr->position;

    /* Tell XBSA what the name and size of volume to write */
    strcpy(dumpIdStr, butcdumpIdStr);   /* "backup_afs_volume_dumps" */
    sprintf(volumeNameStr, "/%d", dparamsPtr->databaseDumpId);
    strcat(volumeNameStr, "/");
    strcat(volumeNameStr, curDump->name);       /* <dumpid>/<volname> */
    hset32(estSize, esize);
    hshlft(estSize, 10);        /* Multiply by 1024 so its in KB */

    rc = xbsa_WriteObjectBegin(&butxInfo, dumpIdStr, volumeNameStr,
                               xbsalGName, estSize, dumpDescription,
                               objectDescription);
    if (rc != XBSA_SUCCESS) {
        ErrorLog(1, taskId, rc, 0,
                 "Unable to begin writing of the fileset data to the server\n");
        ERROR_EXIT(rc);
    }
    indump = 1;                 /* Will need to do an xbsa_WriteObjectEnd */

    /* Create and Write the volume header */
    makeVolumeHeader(&hostVolumeHeader, dparamsPtr, 1);
    hostVolumeHeader.contd = 0;
    volumeHeader_hton(&hostVolumeHeader, (struct volumeHeader *)buffer);

    rc = xbsa_WriteObjectData(&butxInfo, buffer,
                              sizeof(struct volumeHeader), &bytesWritten);
    if (rc != XBSA_SUCCESS) {
        ErrorLog(1, taskId, rc, 0,
                 "Unable to write VolumeHeader data to the server\n");
        ERROR_EXIT(rc);
    }
    /* There is a bug in the ADSM library where the bytesWritten is
     * not filled in, so we set it as correct anyway.
     */
    bytesWritten = sizeof(struct volumeHeader);
    if (bytesWritten != sizeof(struct volumeHeader)) {
        ErrorLog(1, taskId, rc, 0,
                 "The size of VolumeHeader written (%d) does not equal its actual size (%" AFS_SIZET_FMT ")\n",
                 bytesWritten, sizeof(struct volumeHeader));
        ERROR_EXIT(TC_INTERNALERROR);
    }

    incSize(tapeInfoPtr, sizeof(struct volumeHeader));  /* Increment amount we've written */
    tsize += bytesWritten;

    /* Start reading volume data, rx_Read(), and dumping to the tape
     * until we've dumped the entire volume (endofvolume == 1).
     */
    volBytesRead = 0;
    chunkSize = 0;
    while (!endofvolume) {      /*w */
        /* Check for abort in the middle of writing data */
        if (volBytesRead >= chunkSize) {
            chunkSize += BIGCHUNK;
            if (checkAbortByTaskId(taskId))
                ABORT_EXIT(TC_ABORTEDBYREQUEST);

            /* set bytes dumped for backup */
            lock_Status();
            nodePtr->statusNodePtr->nKBytes = tapeInfoPtr->kBytes;
            unlock_Status();
        }

        /* Determine how much data to read in upcoming RX_Read() call */
        toread = dataSize;

        /* Read some volume data. */
        bytesread = rx_Read(fromcall, buffer, toread);
        volBytesRead += bytesread;
        if (bytesread != toread) {
            afs_int32 rcode;

            /* Make sure were at end of volume and not a communication error */
            rc = rx_Error(fromcall);
            if (rc)
                ERROR_EXIT(rc);

            endofvolume = 1;

            /* Create a volume trailer appending it to this data block (if not XBSA) */
            makeVolumeHeader(&hostVolumeHeader, dparamsPtr, 1);
            hostVolumeHeader.contd = 0;
            hostVolumeHeader.magic = TC_VOLENDMAGIC;
            hostVolumeHeader.endTime = time(0);
            volumeHeader_hton(&hostVolumeHeader, (struct volumeHeader *)&buffer[bytesread]);
            bytesread += sizeof(hostVolumeHeader);

            /* End the dump and transaction with the volserver. We end it now, before
             * we make the XBSA call because if XBSA blocks, we could time out on the
             * volserver (After last read, the transaction with the volserver is idle).
             */
            rc = rx_EndCall(fromcall, 0);
            fromcall = 0;
            if (rc)
                ERROR_EXIT(rc);

            rc = AFSVolEndTrans(fromconn, fromtid, &rcode);
            fromtid = 0;
            if (rc)
                ERROR_EXIT(rc);
        }

        /* Write the datablock out */
        rc = xbsa_WriteObjectData(&butxInfo, buffer, bytesread,
                                  &bytesWritten);
        if (rc != XBSA_SUCCESS) {
            ErrorLog(1, taskId, rc, 0,
                     "Unable to write data to the server\n");
            ERROR_EXIT(rc);
        }
        /* There is a bug in the ADSM library where the bytesWritten is
         * not filled in, so we set it as correct anyway.
         */
        bytesWritten = bytesread;
        if (bytesWritten != bytesread) {
            ErrorLog(1, taskId, rc, 0,
                     "The size of data written (%d) does not equal size read (%d)\n",
                     bytesWritten, bytesread);
            ERROR_EXIT(TC_INTERNALERROR);
        }

        incSize(tapeInfoPtr, bytesread);        /* Increment amount we've written */
        tsize += bytesWritten;

        /* Display a status line every statusSize or at end of volume */
        if (statusSize && ((tsize >= statuscount) || endofvolume)) {
            time_t t = time(0);
            struct tm tm;
            localtime_r(&t, &tm);
            printf("%02d:%02d:%02d: Task %u: %u KB: %s: %u B\n", tm.tm_hour,
                   tm.tm_min, tm.tm_sec, taskId, tapeInfoPtr->kBytes,
                   hostVolumeHeader.volumeName, tsize);
            statuscount = tsize + statusSize;
        }
    }                           /*w */

    /* End the XBSA transaction before recording it in BUDB as successfully dumped */
    rc = xbsa_WriteObjectEnd(&butxInfo);
    indump = 0;
    if (rc != XBSA_SUCCESS) {
        ErrorLog(1, taskId, rc, 0,
                 "Unable to terminate writing of the volume data to the server");
        ERROR_EXIT(rc);
    }
    rc = xbsa_EndTrans(&butxInfo);
    begindump = 0;
    tapeInfoPtr->position++;
    if (rc != XBSA_SUCCESS) {
        ErrorLog(1, taskId, rc, 0,
                 "Unable to terminate the current transaction");
        ERROR_EXIT(rc);
    }

    /* Record in BUDB the volume fragment as succcessfully dumped */
    rc = addVolume(0, dparamsPtr->databaseDumpId, dparamsPtr->tapeName,
                   nodePtr->dumps[dparamsPtr->curVolume].name,
                   nodePtr->dumps[dparamsPtr->curVolume].vid,
                   nodePtr->dumps[dparamsPtr->curVolume].cloneDate,
                   dparamsPtr->curVolStartPos, volBytesRead, 0 /*frag0 */ ,
                   (BUDB_VOL_FIRSTFRAG | BUDB_VOL_LASTFRAG));
    if (rc)
        ABORT_EXIT(rc);

    dparamsPtr->curVolumeStatus = DUMP_SUCCESS;

  error_exit:
    /* Cleanup after an error occurs part way into a volume dump */
    if (fromcall) {
        rc = rx_EndCall(fromcall, 0);
        if (!code)
            code = rc;
    }

    if (fromtid) {
        afs_int32 rcode;
        rc = AFSVolEndTrans(fromconn, fromtid, &rcode);
        if (!code)
            code = (rc ? rc : rcode);
    }

    /* If this dump failed, what happens to successive retries
     * of the volume? How do they get recorded in the XBSA database
     * (overwritten)? If not, we don't record this in the BUDB database
     * so it will not be removed when we delete the dump. What to do?
     * Also if the volume was never recorded in the DB (partial dump).
     */
    if (indump) {
        /* End the Write */
        rc = xbsa_WriteObjectEnd(&butxInfo);
        indump = 0;
        if (rc != XBSA_SUCCESS) {
            ErrorLog(1, taskId, rc, 0,
                     "Unable to terminate writing of the volume data to the server");
        }
        tapeInfoPtr->position++;
    }

    if (begindump) {
        /* End the XBSA Transaction */
        rc = xbsa_EndTrans(&butxInfo);
        begindump = 0;
        if (rc != XBSA_SUCCESS) {
            ErrorLog(1, taskId, rc, 0,
                     "Unable to terminate the current transaction");
        }
    }

    return (code);

  abort_exit:
    dparamsPtr->curVolumeStatus = DUMP_FAILED;
    ERROR_EXIT(code);
#else
    return 0;
#endif
}

#define HOSTADDR(sockaddr) (sockaddr)->sin_addr.s_addr

/* dumpPass
 *      Go through the list of volumes to dump, dumping each one. The action
 *      taken when a volume dump fails, depends on the passNumber. At minimum,
 *      the failed volume is remembered.
 * notes:
 *      flushSavedEntries - inconsistent treatment for errors. What should
 *              be done for user aborts?
 */

afs_int32
dumpPass(struct dumpRock * dparamsPtr, int passNumber)
{
    struct dumpNode *nodePtr = dparamsPtr->node;
    struct butm_tapeInfo *tapeInfoPtr = dparamsPtr->tapeInfoPtr;
    afs_int32 taskId = nodePtr->taskID;
    struct tc_dumpDesc *curDump;
    int action, e;
    afs_int32 code = 0, tcode, dvcode;
    char ch;
    struct vldbentry vldbEntry;
    struct sockaddr_in server;
    afs_int32 tapepos;

    TapeLog(2, taskId, 0, 0, "Starting pass %d\n", passNumber);

    /* while there are more volumes to dump */
    for (dparamsPtr->curVolume = 0; dparamsPtr->curVolume < nodePtr->arraySize; dparamsPtr->curVolume++) {      /*w */
        curDump = &nodePtr->dumps[dparamsPtr->curVolume];
        if (curDump->hostAddr == 0)
            continue;

        /* set name of current volume being dumped */
        lock_Status();
        strcpy(nodePtr->statusNodePtr->volumeName, curDump->name);
        unlock_Status();

        /* Determine location of the volume.
         * In case the volume moved has moved.
         */
        if (passNumber > 1) {   /*pass */
            tcode =
                bc_GetEntryByID(cstruct, curDump->vid, curDump->vtype,
                                &vldbEntry);
            if (tcode) {
                ErrorLog(0, taskId, tcode, 0,
                         "Volume %s (%u) failed - Can't find volume in VLDB\n",
                         curDump->name, curDump->vid);
                curDump->hostAddr = 0;
                dparamsPtr->volumesFailed++;
                continue;
            }

            switch (curDump->vtype) {
            case BACKVOL:
                if (!(vldbEntry.flags & VLF_BACKEXISTS)) {
                    ErrorLog(0, taskId, 0, 0,
                             "Volume %s (%u) failed - Backup volume no longer exists\n",
                             curDump->name, curDump->vid);
                    curDump->hostAddr = 0;
                    dparamsPtr->volumesFailed++;
                    continue;
                }
                /* Fall into RWVOL case */

            case RWVOL:
                for (e = 0; e < vldbEntry.nServers; e++) {      /* Find the RW volume */
                    if (vldbEntry.serverFlags[e] & VLSF_RWVOL)
                        break;
                }
                break;

            case ROVOL:
                /* Try to use the server and partition we found the volume on
                 * Otherwise, use the first RO volume.
                 */
                for (e = 0; e < vldbEntry.nServers; e++) {      /* Find the RO volume */
                    if ((curDump->hostAddr == vldbEntry.serverNumber[e])
                        && (curDump->partition ==
                            vldbEntry.serverPartition[e]))
                        break;
                }

                if (e >= vldbEntry.nServers) {  /* Didn't find RO volume */
                    for (e = 0; e < vldbEntry.nServers; e++) {  /* Find the first RO volume */
                        if (vldbEntry.serverFlags[e] & VLSF_ROVOL)
                            break;
                    }
                }
                break;

            default:
                ErrorLog(0, taskId, 0, 0,
                         "Volume %s (%u) failed - Unknown volume type\n",
                         curDump->name, curDump->vid);
                curDump->hostAddr = 0;
                continue;
            }

            if (e >= vldbEntry.nServers) {
                ErrorLog(0, taskId, 0, 0,
                         "Volume %s (%u) failed - Can't find volume entry in VLDB\n",
                         curDump->name, curDump->vid);
                curDump->hostAddr = 0;
                dparamsPtr->volumesFailed++;
                continue;
            }

            /* Remember the server and partition the volume exists on */
            memset(&server, 0, sizeof(server));
            server.sin_addr.s_addr = vldbEntry.serverNumber[e];
            server.sin_port = 0;
            server.sin_family = AF_INET;
#ifdef STRUCT_SOCKADDR_HAS_SA_LEN
            server.sin_len = sizeof(struct sockaddr_in);
#endif
            curDump->hostAddr = HOSTADDR(&server);
            curDump->partition = vldbEntry.serverPartition[e];

            /* Determine date from which to do an incremental dump
             */
            if (nodePtr->parent) {
                tcode =
                    bcdb_FindClone(nodePtr->parent, curDump->name,
                                   &curDump->date);
                if (tcode)
                    curDump->date = 0;
            } else {
                curDump->date = 0;      /* do a full dump */
            }
        }
        /*pass */
        if (checkAbortByTaskId(taskId))
            ERROR_EXIT(TC_ABORTEDBYREQUEST);

        /* Establish connection to volume - UV_ routine expects
         * host address in network order
         */
        if (CONF_XBSA) {
            dvcode = xbsaDumpVolume(curDump, dparamsPtr);
        } else {
            dvcode = dumpVolume(curDump, dparamsPtr);
        }
        action = dparamsPtr->curVolumeStatus;

        /* Flush volume and tape entries to the database */
        tcode = flushSavedEntries(action);
        if (tcode)
            ERROR_EXIT(tcode);

        switch (action) {
        case DUMP_SUCCESS:
            TapeLog(1, taskId, 0, 0, "Volume %s (%u) successfully dumped\n",
                    curDump->name, curDump->vid);
            if (dvcode)
                ErrorLog(1, taskId, dvcode, 0,
                         "Warning: Termination processing error on volume %s (%u)\n",
                         curDump->name, curDump->vid);

            curDump->hostAddr = 0;
            dparamsPtr->volumesDumped++;
            break;

        case DUMP_PARTIAL:
        case DUMP_NOTHING:
            if (action == DUMP_PARTIAL) {
                ErrorLog(1, taskId, dvcode, 0,
                         "Volume %s (%u) failed - partially dumped\n",
                         curDump->name, curDump->vid);
            } else if (dvcode) {
                ErrorLog(0, taskId, dvcode, 0, "Volume %s (%u) failed\n",
                         curDump->name, curDump->vid);
            } else {
                ErrorLog(0, taskId, dvcode, 0,
                         "Volume %s (%u) not dumped - has not been re-cloned since last dump\n",
                         curDump->name, curDump->vid);
            }

            if (passNumber == maxpass) {
                if (!queryoperator)
                    ch = 'o';
                else
                    ch = retryPrompt(curDump->name, curDump->vid, taskId);

                switch (ch) {
                case 'r':       /* retry */
                    dparamsPtr->curVolume--;    /* redump this volume */
                    continue;
                case 'o':       /* omit */
                    ErrorLog(1, taskId, 0, 0, "Volume %s (%u) omitted\n",
                             curDump->name, curDump->vid);
                    dparamsPtr->volumesFailed++;
                    break;
                case 'a':       /* abort */
                    TapeLog(1, taskId, 0, 0, "Dump aborted\n");
                    ERROR_EXIT(TC_ABORTEDBYREQUEST);
                    break;
                default:
                    ERROR_EXIT(TC_INTERNALERROR);
                    break;
                }
            }
            break;

        case DUMP_RETRY:
            TapeLog(1, taskId, dvcode, 0,
                    "Volume %s (%u) hit end-of-tape inferred - will retry on next tape\n",
                    curDump->name, curDump->vid);

            /* Get the next tape */
            unmountTape(taskId, tapeInfoPtr);

            dparamsPtr->tapeSeq++;
            tcode = getDumpTape(dparamsPtr, 1, 0);      /* interactive - no appends */
            if (tcode)
                ERROR_EXIT(tcode);

            dparamsPtr->curVolume--;    /* redump this volume */
            continue;

        case DUMP_NORETRYEOT:
            ErrorLog(1, taskId, 0, 0,
                     "Volume %s (%u) failed - volume larger than tape\n",
                     curDump->name, curDump->vid);

            /* rewrite the label on the tape - rewind - no need to switch tapes */
            tcode = butm_Create(tapeInfoPtr, &dparamsPtr->tapeLabel, 1);
            if (tcode) {
                ErrorLog(0, taskId, tcode, tapeInfoPtr->error,
                         "Can't relabel tape\n");

                unmountTape(taskId, tapeInfoPtr);
                tcode = getDumpTape(dparamsPtr, 1, 0);  /* interactive - no appends */
                if (tcode)
                    ERROR_EXIT(tcode);
            } else {            /* Record the tape in database */
                tapepos = tapeInfoPtr->position;
                tcode =
                    useTape(&dparamsPtr->tape, dparamsPtr->databaseDumpId,
                            dparamsPtr->tapeName,
                            (dparamsPtr->tapeSeq + dparamsPtr->dump.tapes.b),
                            dparamsPtr->tapeLabel.useCount,
                            dparamsPtr->tapeLabel.creationTime,
                            dparamsPtr->tapeLabel.expirationDate, tapepos);
            }

            curDump->hostAddr = 0;
            dparamsPtr->volumesFailed++;
            break;

        case DUMP_NODUMP:
            TapeLog(1, taskId, dvcode, 0,
                    "Volume %s (%u) not dumped - has not been modified since last dump\n",
                    curDump->name, curDump->vid);

            curDump->hostAddr = 0;
            dparamsPtr->volumesNotDumped++;
            break;

        default:
            ErrorLog(1, taskId, dvcode, 0, "Volume %s (%u) failed\n",
                     curDump->name, curDump->vid);
            ERROR_EXIT(dvcode);
            break;
        }
    }                           /*w */

  error_exit:
    /* check if we terminated while processing a volume */
    if (dparamsPtr->curVolume < nodePtr->arraySize) {
        TapeLog(2, taskId, 0, 0,
                "Terminated while processing Volume %s (%u)\n", curDump->name,
                curDump->vid);
    }

    /* print a summary of this pass */
    TapeLog(2, taskId, 0, 0, "End of pass %d: Volumes remaining = %d\n",
            passNumber,
            nodePtr->arraySize - (dparamsPtr->volumesDumped +
                                  dparamsPtr->volumesFailed +
                                  dparamsPtr->volumesNotDumped));
    return (code);
}

void *
Dumper(void *param)
{
    struct dumpNode *nodePtr = (struct dumpNode *)param;
    struct dumpRock dparams;
    struct butm_tapeInfo tapeInfo;
    int pass;
    int action;
    afs_int32 taskId;
    afs_int32 code = 0;

    /* for volume setup */
    int i;
    int failedvolumes = 0;
    int dumpedvolumes = 0;
    int nodumpvolumes = 0;
    char strlevel[5];
    char msg[20];
    char finishedMsg1[50];
    char finishedMsg2[50];
    time_t startTime = 0;
    time_t endTime = 0;
    afs_int32 allocbufferSize;

    extern struct deviceSyncNode *deviceLatch;
    extern struct tapeConfig globalTapeConfig;

    afs_pthread_setname_self("dumper");
    taskId = nodePtr->taskID;   /* Get task Id */
    setStatus(taskId, DRIVE_WAIT);
    EnterDeviceQueue(deviceLatch);
    clearStatus(taskId, DRIVE_WAIT);

    printf("\n\n");
    TapeLog(2, taskId, 0, 0, "Dump %s\n", nodePtr->dumpSetName);

    /* setup the dump parameters */
    memset(&dparams, 0, sizeof(dparams));
    dparams.node = nodePtr;
    dparams.tapeInfoPtr = &tapeInfo;
    dlqInit(&savedEntries);

    if (!CONF_XBSA) {
        /* Instantiate the tape module */
        tapeInfo.structVersion = BUTM_MAJORVERSION;
        code = butm_file_Instantiate(&tapeInfo, &globalTapeConfig);
        if (code) {
            ErrorLog(0, taskId, code, tapeInfo.error,
                     "Can't initialize the tape module\n");
            ERROR_EXIT(code);
        }
    }

    /* check if abort requested while waiting on device latch */
    if (checkAbortByTaskId(taskId))
        ERROR_EXIT(TC_ABORTEDBYREQUEST);

    /* Are there volumes to dump */
    if (nodePtr->arraySize == 0) {
        TLog(taskId, "Dump (%s), no volumes to dump\n", nodePtr->dumpSetName);
        ERROR_EXIT(0);
    }

    /* Allocate a buffer for the dumps. Leave room for header and vol-trailer.
     * dataSize is amount of data to read in each rx_Read() call.
     */
    if (CONF_XBSA) {
        /* XBSA dumps have not header */
        dataSize = BufferSize;
        allocbufferSize = dataSize + sizeof(struct volumeHeader);
    } else {
        tapeblocks = BufferSize / BUTM_BLOCKSIZE;       /* # of 16K tapeblocks */
        dataSize = (tapeblocks * BUTM_BLKSIZE);
        allocbufferSize =
            BUTM_HDRSIZE + dataSize + sizeof(struct volumeHeader);
    }
    bufferBlock = NULL;
    bufferBlock = malloc(allocbufferSize);
    if (!bufferBlock) {
        ErrorLog(0, taskId, TC_NOMEMORY, 0,
                 "Can't allocate BUFFERSIZE for dumps\n");
        ERROR_EXIT(TC_NOMEMORY);
    }

    /* Determine the dumpid of the most recent dump of this volumeset and dumplevel
     * Used when requesting a tape. Done now because once we create the dump, the
     * routine will then find the newly created dump.
     */
    sprintf(strlevel, "%d", nodePtr->level);
    code =
        bcdb_FindLatestDump(nodePtr->volumeSetName, strlevel,
                            &dparams.lastDump);
    if (code) {
        if (code != BUDB_NODUMPNAME) {
            ErrorLog(0, taskId, code, 0, "Can't read backup database\n");
            ERROR_EXIT(code);
        }
        memset(&dparams.lastDump, 0, sizeof(dparams.lastDump));
    }

    code = createDump(&dparams);        /* enter dump into database */
    if (code) {
        ErrorLog(0, taskId, code, 0, "Can't create dump in database\n");
        ERROR_EXIT(code);
    }

    TLog(taskId, "Dump %s (DumpID %u)\n", nodePtr->dumpSetName,
         dparams.databaseDumpId);

    if (!CONF_XBSA) {
        /* mount the tape and write its label */
        code = getDumpTape(&dparams, autoQuery, nodePtr->doAppend);
    } else {
        /* Create a dummy tape to satisfy backup databae */
        code = getXBSATape(&dparams);
        tapeInfo.position = 1;
    }
    if (code) {
        /* If didn't write the label, remove dump from the database */
        if (!dparams.wroteLabel) {
            i = bcdb_deleteDump(dparams.databaseDumpId, 0, 0, 0);
            if (i && (i != BUDB_NOENT))
                ErrorLog(1, taskId, i, 0,
                         "Warning: Can't delete dump %u from database\n",
                         dparams.databaseDumpId);
            else
                dparams.databaseDumpId = 0;
        }
        ERROR_EXIT(code);       /* exit with code from getTape */
    }

    startTime = time(0);
    for (pass = 1; pass <= maxpass; pass++) {
        lastPass = (pass == maxpass);
        code = dumpPass(&dparams, pass);
        if (code)
            ERROR_EXIT(code);

        /* if no failed volumes, we're done */
        if ((dparams.volumesDumped + dparams.volumesFailed +
             dparams.volumesNotDumped) == nodePtr->arraySize)
            break;
    }

    /*
     * Log the error but ignore it since the dump is effectively done.
     * Scantape may assume another volume and ask for next tape.
     */
    if (!CONF_XBSA) {
        code = butm_WriteEOT(&tapeInfo);
        if (code)
            TapeLog(0, taskId, code, tapeInfo.error,
                    "Warning: Can't write end-of-dump on tape\n");
    }

    code =
        finishTape(&dparams.tape,
                   dparams.tapeInfoPtr->kBytes +
                   (dparams.tapeInfoPtr->nBytes ? 1 : 0));
    if (code)
        ERROR_EXIT(code);

    code = finishDump(&dparams.dump);
    if (code)
        ERROR_EXIT(code);

    action = dparams.curVolumeStatus;
    code = flushSavedEntries(action);
    if (code)
        ERROR_EXIT(code);

  error_exit:
    endTime = time(0);
    Bind(0);
    if (bufferBlock)
        free(bufferBlock);

    if (!CONF_XBSA) {
        unmountTape(taskId, &tapeInfo);
    }
    waitDbWatcher();

    dumpedvolumes = dparams.volumesDumped;
    nodumpvolumes = dparams.volumesNotDumped;
    failedvolumes = nodePtr->arraySize - (dumpedvolumes + nodumpvolumes);

    /* pass back the number of volumes we failed to dump */
    lock_Status();
    nodePtr->statusNodePtr->volsFailed = failedvolumes;
    unlock_Status();

    lastPass = 1;               /* In case we aborted */

    DUMPNAME(finishedMsg1, nodePtr->dumpSetName, dparams.databaseDumpId);
    sprintf(finishedMsg2, "%d volumes dumped", dumpedvolumes);
    if (failedvolumes) {
        sprintf(msg, ", %d failed", failedvolumes);
        strcat(finishedMsg2, msg);
    }
    if (nodumpvolumes) {
        sprintf(msg, ", %d unchanged", nodumpvolumes);
        strcat(finishedMsg2, msg);
    }

    if (code == TC_ABORTEDBYREQUEST) {
        ErrorLog(0, taskId, 0, 0, "%s: Aborted by request. %s\n",
                 finishedMsg1, finishedMsg2);
        clearStatus(taskId, ABORT_REQUEST);
        setStatus(taskId, ABORT_DONE);
    } else if (code) {
        ErrorLog(0, taskId, code, 0, "%s: Finished with errors. %s\n",
                 finishedMsg1, finishedMsg2);
        setStatus(taskId, TASK_ERROR);
    } else {
        TLog(taskId, "%s: Finished. %s\n", finishedMsg1, finishedMsg2);
    }
    lastPass = 0;

    /* Record how long the dump took */
    if (centralLogIO && startTime) {
        long timediff;
        afs_int32 hrs, min, sec, tmp;
        char line[1024];
        struct tm tmstart, tmend;

        localtime_r(&startTime, &tmstart);
        localtime_r(&endTime, &tmend);
        timediff = (int)endTime - (int)startTime;
        hrs = timediff / 3600;
        tmp = timediff % 3600;
        min = tmp / 60;
        sec = tmp % 60;

        sprintf(line,
                "%-5d  %02d/%02d/%04d %02d:%02d:%02d  "
                "%02d/%02d/%04d %02d:%02d:%02d  " "%02d:%02d:%02d  "
                "%s %d of %d volumes dumped (%lu KB)\n", taskId,
                tmstart.tm_mon + 1, tmstart.tm_mday, tmstart.tm_year + 1900,
                tmstart.tm_hour, tmstart.tm_min, tmstart.tm_sec,
                tmend.tm_mon + 1, tmend.tm_mday, tmend.tm_year + 1900,
                tmend.tm_hour, tmend.tm_min, tmend.tm_sec, hrs, min, sec,
                nodePtr->volumeSetName, dumpedvolumes,
                dumpedvolumes + failedvolumes,
                afs_printable_uint32_lu(dparams.tapeInfoPtr->kBytes + 1));

        fwrite(line, strlen(line), 1, centralLogIO);
        fflush(centralLogIO);
    }

    setStatus(taskId, TASK_DONE);

    FreeNode(taskId);           /* free the dump node */
    LeaveDeviceQueue(deviceLatch);
    return (void *)(intptr_t)(code);
}

#define BELLTIME 60             /* 60 seconds before a bell rings */
#define BELLCHAR 7              /* ascii for bell */

/* retryPrompt
 *      prompt the user to decide how to handle a failed volume dump. The
 *      volume parameters describe the volume that failed
 * entry:
 *      volumeName - name of volume
 *      volumeId - volume id
 *      taskId - for job contrl
 * fn return:
 *      character typed by user, one of r, o or a
 */

char
retryPrompt(char *volumeName, afs_int32 volumeId, afs_uint32 taskId)
{
    afs_int32 start;
    char ch;
    afs_int32 code = 0;

    setStatus(taskId, OPR_WAIT);
    printf("\nDump of volume %s (%u) failed\n\n", volumeName, volumeId);

    printf("Please select action to be taken for this volume\n");

  again:
    printf("r - retry, try dumping this volume again\n");
    printf("o - omit,  this volume from this dump\n");
    printf("a - abort, the entire dump\n");

    while (1) {
        FFlushInput();
        putchar(BELLCHAR);
        fflush(stdout);

        start = time(0);
        while (1) {
            code = LWP_GetResponseKey(5, &ch);  /* ch stores key pressed */
            if (code == 1)
                break;          /* input is available */

            if (checkAbortByTaskId(taskId)) {
                clearStatus(taskId, OPR_WAIT);
                printf
                    ("This tape operation has been aborted by the coordinator\n");
                return 'a';
            }

            if (time(0) > start + BELLTIME)
                break;
        }
        /* otherwise, we should beep again, check for abort and go back,
         * since the GetResponseKey() timed out.
         */
        if (code == 1)
            break;              /* input is available */
    }
    clearStatus(taskId, OPR_WAIT);
    if (ch != 'r' && ch != 'o' && ch != 'a') {
        printf("Please select one of the 3 options, r, o or a\n");
        goto again;
    }

    return ch;
}

/* For testing: it prints the tape label */
int
printTapeLabel(struct butm_tapeLabel *tl)
{
    printf("Tape Label\n");
    printf("   structVersion  = %d\n", tl->structVersion);
    printf("   creationTime   = %u\n", tl->creationTime);
    printf("   expirationDate = %u\n", tl->expirationDate);
    printf("   AFSName        = %s\n", tl->AFSName);
    printf("   cell           = %s\n", tl->cell);
    printf("   dumpid         = %d\n", tl->dumpid);
    printf("   useCount       = %d\n", tl->useCount);
    printf("   comment        = %s\n", tl->comment);
    printf("   pName          = %s\n", tl->pName);
    printf("   size           = %u\n", tl->size);
    printf("   dumpPath       = %s\n", tl->dumpPath);
    return 0;
}

/* getXBSATape
 *      Create a tape structure to be satisfy the backup database
 *      even though we don't really use a tape with XBSA.
 */
int
getXBSATape(struct dumpRock *dparamsPtr)
{
    struct dumpNode *nodePtr = dparamsPtr->node;
    struct butm_tapeInfo *tapeInfoPtr = dparamsPtr->tapeInfoPtr;
    struct butm_tapeLabel *tapeLabelPtr = &dparamsPtr->tapeLabel;
    afs_int32 code = 0;

    tc_MakeTapeName(dparamsPtr->tapeName, &nodePtr->tapeSetDesc,
                    dparamsPtr->tapeSeq);

    GetNewLabel(tapeInfoPtr, "" /*pName */ , dparamsPtr->tapeName,
                tapeLabelPtr);
    strcpy(tapeLabelPtr->dumpPath, nodePtr->dumpName);
    tapeLabelPtr->dumpid = dparamsPtr->databaseDumpId;
    tapeLabelPtr->expirationDate =
        calcExpirationDate(nodePtr->tapeSetDesc.expType,
                           nodePtr->tapeSetDesc.expDate, time(0));

    /* printTapeLabel(tapeLabelPtr); For testing */

    code =
        useTape(&dparamsPtr->tape, dparamsPtr->databaseDumpId,
                dparamsPtr->tapeName,
                (dparamsPtr->tapeSeq + dparamsPtr->dump.tapes.b),
                tapeLabelPtr->useCount, tapeLabelPtr->creationTime,
                tapeLabelPtr->expirationDate, 0 /*tape position */ );
    return (code);
}

/* getDumpTape
 *      iterate until the desired tape (as specified by the dump structures)
 *      is mounted.
 * entry:
 *      interactiveFlag
 *              0 - assume the tape is there. Prompt if assumption false
 *              1 - prompt regardless
 */

int
getDumpTape(struct dumpRock *dparamsPtr, int interactiveFlag,
            afs_int32 append)
{
    struct dumpNode *nodePtr = dparamsPtr->node;
    struct butm_tapeInfo *tapeInfoPtr = dparamsPtr->tapeInfoPtr;
    struct butm_tapeLabel *newTapeLabelPtr = &dparamsPtr->tapeLabel;
    char AFSTapeName[TC_MAXTAPENAMELEN];
    afs_int32 taskId = nodePtr->taskID;
    struct butm_tapeLabel oldTapeLabel;
    struct budb_dumpEntry dumpEntry;
    struct budb_tapeEntry tapeEntry;
    struct budb_volumeEntry volEntry;
    Date expir;
    afs_int32 doAppend;
    afs_int32 code = 0;
    int askForTape;
    int tapecount = 1;
    char strlevel[5];
    afs_int32 tapepos, lastpos;

    extern struct tapeConfig globalTapeConfig;

    askForTape = interactiveFlag;
    dparamsPtr->wroteLabel = 0;

    /* Keep prompting for a tape until we get it right */
    while (1) {
        /* What the name of the tape would be if not appending to it */
        tc_MakeTapeName(AFSTapeName, &nodePtr->tapeSetDesc,
                        dparamsPtr->tapeSeq);

        doAppend = append;

        if (askForTape) {
            code =
                PromptForTape((doAppend ? APPENDOPCODE : WRITEOPCODE),
                              AFSTapeName, dparamsPtr->databaseDumpId, taskId,
                              tapecount);
            if (code)
                ERROR_EXIT(code);
        }
        askForTape = 1;
        tapecount++;

        /* open the tape device */
        code = butm_Mount(tapeInfoPtr, AFSTapeName);
        if (code) {
            TapeLog(0, taskId, code, tapeInfoPtr->error, "Can't open tape\n");
            goto getNewTape;
        }

        /* Read the tape label */
        code = butm_ReadLabel(tapeInfoPtr, &oldTapeLabel, 1);   /* rewind */
        if (code) {
            if (tapeInfoPtr->error) {
                ErrorLog(0, taskId, code, tapeInfoPtr->error,
                         "Warning: Tape error while reading label (will proceed with dump)\n");
            }
            memset(&oldTapeLabel, 0, sizeof(oldTapeLabel));
        }

        /* Check if null tape. Prior 3.3, backup tapes have no dump id */
        if ((strcmp(oldTapeLabel.AFSName, "") == 0)
            && (oldTapeLabel.dumpid == 0)) {
            if (doAppend) {
                TLog(taskId,
                     "Dump not found on tape. Proceeding with initial dump\n");
                doAppend = 0;
            }
        } else if (doAppend) {  /* appending */
            /* Check that we don't have a database dump tape */
            if (databaseTape(oldTapeLabel.AFSName)) {
                char gotName[BU_MAXTAPELEN + 32];

                /* label does not match */
                LABELNAME(gotName, &oldTapeLabel);
                TLog(taskId, "Can't append to database tape %s\n", gotName);
                goto getNewTape;
            }

            /* Verify that the tape is of version 4 (AFS 3.3) or greater */
            if (oldTapeLabel.structVersion < TAPE_VERSION_4) {
                TLog(taskId,
                     "Can't append: requires tape version %d or greater\n",
                     TAPE_VERSION_4);
                goto getNewTape;
            }

            /* Verify that the last tape of the dump set is in the drive.
             * volEntry will be zeroed if last dump has no volume entries.
             */
            code =
                bcdb_FindLastTape(oldTapeLabel.dumpid, &dumpEntry, &tapeEntry,
                                  &volEntry);
            if (code) {
                ErrorLog(0, taskId, code, 0,
                         "Can't append: Can't find last volume of dumpId %u in database\n",
                         oldTapeLabel.dumpid);
                printf("Please scan the dump in or choose another tape\n");
                goto getNewTape;
            }
            lastpos =
                (volEntry.position ? volEntry.position : tapeEntry.labelpos);

            if (strcmp(TNAME(&oldTapeLabel), tapeEntry.name)) {
                char expName[BU_MAXTAPELEN + 32], gotName[BU_MAXTAPELEN + 32];

                TAPENAME(expName, tapeEntry.name, oldTapeLabel.dumpid);
                LABELNAME(gotName, &oldTapeLabel);

                TLog(taskId,
                     "Can't append: Last tape in dump-set is %s, label seen %s\n",
                     expName, gotName);
                goto getNewTape;
            }

            /* After reading the tape label, we now know what it is */
            strcpy(AFSTapeName, oldTapeLabel.AFSName);  /* the real name */
            strcpy(tapeInfoPtr->name, oldTapeLabel.AFSName);    /* the real name */

            /* Position after last volume on the tape */
            code = butm_SeekEODump(tapeInfoPtr, lastpos);
            if (code) {
                ErrorLog(0, taskId, code, tapeInfoPtr->error,
                         "Can't append: Can't position to end of dump on tape %s\n",
                         tapeEntry.name);
                goto getNewTape;
            }

            /* Track size of tape - set after seek since seek changes the value */
            tapeInfoPtr->kBytes = tapeEntry.useKBytes;
        } else {                /* not appending */

            afs_uint32 tapeid;
            afs_uint32 dmp;
            struct budb_dumpEntry de, de2;

            /* Check if tape name is not what expected - null tapes are acceptable
             * Don't do check if the tape has a user defined label.
             */
            if (dump_namecheck && (strcmp(oldTapeLabel.pName, "") == 0)) {
                if (strcmp(oldTapeLabel.AFSName, "") && /* not null tape */
                    strcmp(oldTapeLabel.AFSName, AFSTapeName)) {        /* not expected name */
                    TLog(taskId, "Tape label expected %s, label seen %s\n",
                         AFSTapeName, oldTapeLabel.AFSName);
                    goto getNewTape;
                }

                /* Check that we don't have a database dump tape */
                if (databaseTape(oldTapeLabel.AFSName)) {
                    /* label does not match */
                    TLog(taskId,
                         "Tape label expected %s, can't dump to database tape %s\n",
                         AFSTapeName, oldTapeLabel.AFSName);
                    goto getNewTape;
                }
            }

            /* Verify the tape has not expired - only check if not appending */
            if (!tapeExpired(&oldTapeLabel)) {
                TLog(taskId, "This tape has not expired\n");
                goto getNewTape;
            }

            /* Given a tape dump with good data, verify we don't overwrite recent dumps
             * and also verify that the volume will be restorable - if not print warnings
             */
            if (oldTapeLabel.dumpid) {
                /* Do not overwrite a tape that belongs to the dump's dumpset */
                tapeid =
                    (dparamsPtr->initialDumpId ? dparamsPtr->
                     initialDumpId : dparamsPtr->databaseDumpId);
                if (oldTapeLabel.dumpid == tapeid) {
                    ErrorLog(0, taskId, 0, 0,
                             "Can't overwrite tape containing the dump in progress\n");
                    goto getNewTape;
                }

                /* Since the dumpset on this tape will be deleted from database, check if
                 * any of the dump's parent-dumps are on this tape.
                 */
                for (dmp = nodePtr->parent; dmp; dmp = de.parent) {
                    code = bcdb_FindDumpByID(dmp, &de);
                    if (code) {
                        ErrorLog(0, taskId, 0, 0,
                                 "Warning: Can't find parent dump %u in backup database\n",
                                 dmp);
                        break;
                    }

                    tapeid = (de.initialDumpID ? de.initialDumpID : de.id);
                    if (oldTapeLabel.dumpid == tapeid) {
                        ErrorLog(0, taskId, 0, 0,
                                 "Can't overwrite the parent dump %s (DumpID %u)\n",
                                 de.name, de.id);
                        goto getNewTape;
                    }
                }

                /* Since the dumpset on this tape will be deleted from database, check if
                 * any of the dumps in this dumpset are most-recent-dumps.
                 */
                for (dmp = oldTapeLabel.dumpid; dmp; dmp = de.appendedDumpID) {
                    if (dmp == dparamsPtr->lastDump.id) {
                        memcpy(&de, &dparamsPtr->lastDump, sizeof(de));
                        memcpy(&de2, &dparamsPtr->lastDump, sizeof(de2));
                    } else {
                        code = bcdb_FindDumpByID(dmp, &de);
                        if (code)
                            break;
                        sprintf(strlevel, "%d", de.level);
                        code =
                            bcdb_FindLatestDump(de.volumeSetName, strlevel,
                                                &de2);
                        if (code)
                            continue;
                    }

                    /* If dump on the tape is the latest dump at this level */
                    if (de.id == de2.id) {
                        if (strcmp(DUMP_TAPE_NAME, de2.name) == 0) {
                            ErrorLog(0, taskId, 0, 0,
                                     "Warning: Overwriting most recent dump %s (DumpID %u)\n",
                                     de.name, de.id);
                        } else {
                            ErrorLog(0, taskId, 0, 0,
                                     "Warning: Overwriting most recent dump of the '%s' volumeset: %s (DumpID %u)\n",
                                     de.volumeSetName, de.name, de.id);
                        }
                    }
                }
            }                   /* if (oldTapeLabel.dumpid) */
        }                       /* else not appending */

        /*
         * Now have the right tape. Create a new label for the tape
         * Appended labels have the dump's dumpId - labels at beginnings of
         *     tape have the initial dump's dumpId.
         * Appended labels do not increment the useCount.
         * Labels at beginnings of tape use the most future expiration of the dump set.
         */
        GetNewLabel(tapeInfoPtr, oldTapeLabel.pName, AFSTapeName,
                    newTapeLabelPtr);
        strcpy(newTapeLabelPtr->dumpPath, nodePtr->dumpName);
        newTapeLabelPtr->expirationDate =
            calcExpirationDate(nodePtr->tapeSetDesc.expType,
                               nodePtr->tapeSetDesc.expDate, time(0));
        newTapeLabelPtr->dumpid = dparamsPtr->databaseDumpId;
        newTapeLabelPtr->useCount = oldTapeLabel.useCount;

        if (!doAppend) {
            newTapeLabelPtr->useCount++;
            if (dparamsPtr->initialDumpId) {
                newTapeLabelPtr->dumpid = dparamsPtr->initialDumpId;
                expir = ExpirationDate(dparamsPtr->initialDumpId);
                if (expir > newTapeLabelPtr->expirationDate)
                    newTapeLabelPtr->expirationDate = expir;
            }
        }

        /* write the label on the tape - rewind if not appending and vice-versa */
        code = butm_Create(tapeInfoPtr, newTapeLabelPtr, !doAppend);
        if (code) {
            char gotName[BU_MAXTAPELEN + 32];

            LABELNAME(gotName, newTapeLabelPtr);
            TapeLog(0, taskId, code, tapeInfoPtr->error,
                    "Can't label tape as %s\n", gotName);
            goto getNewTape;
        }
        dparamsPtr->wroteLabel = 1;     /* Remember we wrote the label */
        tapepos = tapeInfoPtr->position - 1;

        strcpy(dparamsPtr->tapeName, TNAME(newTapeLabelPtr));

        /* If appending, set dumpentry in the database as appended. */
        if (doAppend) {
            char gotName[BU_MAXTAPELEN + 32];

            nodePtr->tapeSetDesc.b = extractTapeSeq(AFSTapeName);
            dparamsPtr->dump.tapes.b = nodePtr->tapeSetDesc.b;
            dparamsPtr->initialDumpId = oldTapeLabel.dumpid;
            strcpy(nodePtr->tapeSetDesc.format, dumpEntry.tapes.format);

            code =
                bcdb_MakeDumpAppended(dparamsPtr->databaseDumpId,
                                      dparamsPtr->initialDumpId,
                                      nodePtr->tapeSetDesc.b);
            if (code)
                ErrorLog(2, taskId, code, 0,
                         "Warning: Can't append dump %u to dump %u in database\n",
                         dparamsPtr->databaseDumpId,
                         dparamsPtr->initialDumpId);

            LABELNAME(gotName, &oldTapeLabel);
            TLog(taskId, "Appending dump %s (DumpID %u) to tape %s\n",
                 nodePtr->dumpSetName, dparamsPtr->databaseDumpId, gotName);
        }

        /* If not appending, delete overwritten dump from the database */
        else {
            if ((oldTapeLabel.structVersion >= TAPE_VERSION_3)
                && oldTapeLabel.dumpid) {
                code = bcdb_deleteDump(oldTapeLabel.dumpid, 0, 0, 0);
                if (code && (code != BUDB_NOENT))
                    ErrorLog(0, taskId, code, 0,
                             "Warning: Can't delete old dump %u from database\n",
                             oldTapeLabel.dumpid);
            }
        }

        code =
            useTape(&dparamsPtr->tape, dparamsPtr->databaseDumpId,
                    dparamsPtr->tapeName,
                    (dparamsPtr->tapeSeq + dparamsPtr->dump.tapes.b),
                    newTapeLabelPtr->useCount, newTapeLabelPtr->creationTime,
                    newTapeLabelPtr->expirationDate, tapepos);

        /*
         * The margin of space to check for end of tape is set to the
         * amount of space used to write an end-of-tape multiplied by 2.
         * The amount of space is size of a 16K volume trailer, a 16K File
         * End mark, its EOF marker, a 16K EODump marker, its EOF marker,
         * and up to two EOF markers done on close (3 16K blocks + 4 EOF
         * markers).
         */
        tc_EndMargin = (3 * 16384 + 4 * globalTapeConfig.fileMarkSize) * 2;
        tc_KEndMargin = tc_EndMargin / 1024;
        break;

      getNewTape:
        unmountTape(taskId, tapeInfoPtr);
    }

  error_exit:
    return (code);
}

int
makeVolumeHeader(struct volumeHeader *vhptr, struct dumpRock *dparamsPtr,
                 int fragmentNumber)
{
    struct dumpNode *nodePtr = dparamsPtr->node;
    struct tc_dumpDesc *curDump;
    afs_int32 code = 0;

    curDump = &nodePtr->dumps[dparamsPtr->curVolume];

    memset(vhptr, 0, sizeof(*vhptr));
    strcpy(vhptr->volumeName, curDump->name);
    vhptr->volumeID = curDump->vid;
    vhptr->cloneDate = curDump->cloneDate;
    vhptr->server = curDump->hostAddr;
    vhptr->part = curDump->partition;
    vhptr->from = curDump->date;
    vhptr->frag = fragmentNumber;
    vhptr->contd = 0;
    vhptr->magic = TC_VOLBEGINMAGIC;
    vhptr->dumpID = dparamsPtr->databaseDumpId; /* real dump id */
    vhptr->level = nodePtr->level;
    vhptr->parentID = nodePtr->parent;
    vhptr->endTime = 0;
    vhptr->versionflags = CUR_TAPE_VERSION;
    strcpy(vhptr->dumpSetName, nodePtr->dumpSetName);
    strcpy(vhptr->preamble, "H++NAME#");
    strcpy(vhptr->postamble, "T--NAME#");

    return (code);
}

int
volumeHeader_hton(struct volumeHeader *hostPtr, struct volumeHeader *netPtr)
{
    struct volumeHeader volHdr;

    memset(&volHdr, 0, sizeof(volHdr));

    strcpy(volHdr.preamble, hostPtr->preamble);
    strcpy(volHdr.postamble, hostPtr->postamble);
    strcpy(volHdr.volumeName, hostPtr->volumeName);
    strcpy(volHdr.dumpSetName, hostPtr->dumpSetName);
    volHdr.volumeID = htonl(hostPtr->volumeID);
    volHdr.server = htonl(hostPtr->server);
    volHdr.part = htonl(hostPtr->part);
    volHdr.from = htonl(hostPtr->from);
    volHdr.frag = htonl(hostPtr->frag);
    volHdr.magic = htonl(hostPtr->magic);
    volHdr.contd = htonl(hostPtr->contd);
    volHdr.dumpID = htonl(hostPtr->dumpID);
    volHdr.level = htonl(hostPtr->level);
    volHdr.parentID = htonl(hostPtr->parentID);
    volHdr.endTime = htonl(hostPtr->endTime);
    volHdr.versionflags = htonl(hostPtr->versionflags);
    volHdr.cloneDate = htonl(hostPtr->cloneDate);

    memcpy(netPtr, &volHdr, sizeof(struct volumeHeader));
    return 0;
}

/* database related routines */

afs_int32
createDump(struct dumpRock *dparamsPtr)
{
    struct dumpNode *nodePtr = dparamsPtr->node;
    struct budb_dumpEntry *dumpPtr;
    afs_int32 code = 0;

    dumpPtr = &dparamsPtr->dump;
    memset(dumpPtr, 0, sizeof(*dumpPtr));

    /* id filled in by database */
    dumpPtr->parent = nodePtr->parent;
    dumpPtr->level = nodePtr->level;
    dumpPtr->flags = 0;
#ifdef xbsa
    if (CONF_XBSA) {
        if (xbsaType == XBSA_SERVER_TYPE_ADSM) {
            strcpy(dumpPtr->tapes.tapeServer, butxInfo.serverName);
            dumpPtr->flags = BUDB_DUMP_ADSM;
        }
        if (!(butxInfo.serverType & XBSA_SERVER_FLAG_MULTIPLE)) {
            /* The current server (API) doesn't provide the function required
             * to specify a server at startup time.  For that reason, we can't
             * be sure that the server name supplied by the user in the user-
             * defined configuration file is correct.  We set a flag here so
             * we know at restore time that the servername info in the backup
             * database may be incorrect.  We will not allow a server switch
             * at that time, even if the server at restore time supports
             * multiple servers.
             */
            dumpPtr->flags |= BUDB_DUMP_XBSA_NSS;
        }
    }
#endif
    strcpy(dumpPtr->volumeSetName, nodePtr->volumeSetName);
    strcpy(dumpPtr->dumpPath, nodePtr->dumpName);
    strcpy(dumpPtr->name, nodePtr->dumpSetName);
    dumpPtr->created = 0;       /* let database assign it */
    dumpPtr->incTime = 0;       /* not really used */
    dumpPtr->nVolumes = 0;
    dumpPtr->initialDumpID = 0;

    dumpPtr->tapes.id = groupId;
    dumpPtr->tapes.b = 1;
    dumpPtr->tapes.maxTapes = 0;
    strcpy(dumpPtr->tapes.format, nodePtr->tapeSetDesc.format);

    /* principal filled in by database */

    /* now call the database to create the entry */
    code = bcdb_CreateDump(dumpPtr);
    if (code == 0)
        dparamsPtr->databaseDumpId = dumpPtr->id;

    return (code);
}

#ifdef xbsa
/* InitToServer:
 * Initialize to a specific server. The first time, we remember the
 * server as the original server and go back to it each time we pass 0
 * as the server.
 */
afs_int32
InitToServer(afs_int32 taskId, struct butx_transactionInfo * butxInfoP,
             char *server)
{
    static char origserver[BSA_MAX_DESC];
    static int init = 0;
    afs_int32 rc, code = 0;

    if (!init) {
        strcpy(origserver, "");
        init = 1;
    }

    if (!server)
        server = origserver;    /* return to original server */
    if (strcmp(server, "") == 0)
        return 0;               /* No server, do nothing */
    if (strcmp(butxInfoP->serverName, server) == 0)
        return 0;               /* same server, do nothing */
    if (strcmp(origserver, "") == 0)
        strcpy(origserver, server);     /* remember original server */

    if (strcmp(butxInfoP->serverName, "") != 0) {
        /* If already connected to a server, disconnect from it.
         * Check to see if our server does not support switching.
         */
        if (!(butxInfo.serverType & XBSA_SERVER_FLAG_MULTIPLE)) {
            ErrorLog(0, taskId, TC_BADTASK, 0,
                     "This version of XBSA libraries does not support switching "
                     "from server %s to server %s\n", butxInfoP->serverName,
                     server);
            return (TC_BADTASK);
        }

        rc = xbsa_Finalize(&butxInfo);
        if (rc != XBSA_SUCCESS) {
            ErrorLog(0, taskId, rc, 0,
                     "InitToServer: Unable to terminate the connection to server %s\n",
                     butxInfoP->serverName);
            ERROR_EXIT(rc);
        }
    }

    /* initialize to the new server */
    rc = xbsa_Initialize(&butxInfo, xbsaObjectOwner, appObjectOwner,
                         xbsaSecToken, server);
    if (rc != XBSA_SUCCESS) {
        ErrorLog(0, taskId, rc, 0,
                 "InitToServer: Unable to initialize the XBSA library to server %s\n",
                 server);
        ERROR_EXIT(rc);
    }

  error_exit:
    return (code);
}


/* DeleteDump
 *
 */
void *
DeleteDump(void *param)
{
    struct deleteDumpIf *ptr = (struct deleteDumpIf *)param;

    afs_int32 taskId;
    afs_int32 rc, code = 0;
    afs_uint32 dumpid;
    afs_int32 index, next, dbTime;
    budb_volumeList vl;
    struct budb_dumpEntry dumpEntry;
    char tapeName[BU_MAXTAPELEN];
    char dumpIdStr[XBSA_MAX_OSNAME];
    char volumeNameStr[XBSA_MAX_PATHNAME];
    afs_int32 i;
    int intrans = 0;
    int allnotfound = 1, onenotfound = 0;
    extern struct udbHandleS udbHandle;
    extern struct deviceSyncNode *deviceLatch;

    dumpid = ptr->dumpID;
    taskId = ptr->taskId;       /* Get task Id */

    afs_pthread_setname_self("deletedump");
    setStatus(taskId, DRIVE_WAIT);
    EnterDeviceQueue(deviceLatch);
    clearStatus(taskId, DRIVE_WAIT);

    printf("\n\n");
    TapeLog(2, taskId, 0, 0, "Delete Dump %u\n", dumpid);

    vl.budb_volumeList_len = 0;
    vl.budb_volumeList_val = 0;
    tapeName[0] = '\0';

    /* Get the dump info for the dump we are deleting */
    rc = bcdb_FindDumpByID(dumpid, &dumpEntry);
    if (rc) {
        ErrorLog(0, taskId, rc, 0,
                 "Unable to locate dump ID %u in database\n", dumpid);
        setStatus(taskId, TASK_ERROR);
        ERROR_EXIT(rc);
    }

    /* we must make sure that we are configured with the correct type of
     * XBSA server for this dump delete! Only those dumped to an ADSM server.
     */
    if ((xbsaType == XBSA_SERVER_TYPE_ADSM)
        && !((dumpEntry.flags & (BUDB_DUMP_ADSM | BUDB_DUMP_BUTA)))) {
        ErrorLog(0, taskId, TC_BADTASK, 0,
                 "The dump %u requested for deletion is incompatible with this instance of butc\n",
                 dumpid);
        setStatus(taskId, TASK_ERROR);
        ERROR_EXIT(TC_BADTASK);
    }

    /* Make sure we are connected to the correct server. If not, switch to it if appropriate */
    if ((strlen((char *)dumpEntry.tapes.tapeServer) != 0)
        && (strcmp((char *)dumpEntry.tapes.tapeServer, butxInfo.serverName) !=
            0)) {

        /* Check to see if the tapeServer name is trustworthy */
        if ((dumpEntry.flags & (BUDB_DUMP_XBSA_NSS | BUDB_DUMP_BUTA))
            && !forcemultiple) {
            /* The dump was made with a version of the XBSA interface
             * that didn't allow switching of servers, we can't be sure
             * that the servername in the backup database is correct.  So,
             * we will check the servername and log it if they don't match;
             * but we will try to do the delete without switching servers.
             */
            TLog(taskId,
                 "The dump %d requested for deletion is on server %s "
                 "but butc is connected to server %s "
                 "(Attempting to delete the dump anyway)\n", dumpid,
                 (char *)dumpEntry.tapes.tapeServer, butxInfo.serverName);
        } else {
            TLog(taskId,
                 "The dump %u requested for deletion is on server %s "
                 "but butc is connected to server %s "
                 "(switching servers)\n", dumpid,
                 (char *)dumpEntry.tapes.tapeServer, butxInfo.serverName);

            rc = InitToServer(taskId, &butxInfo,
                              (char *)dumpEntry.tapes.tapeServer);
            if (rc != XBSA_SUCCESS) {
                setStatus(taskId, TASK_ERROR);
                ERROR_EXIT(rc);
            }
        }
    }

    /* Start a new Transaction */
    rc = xbsa_BeginTrans(&butxInfo);
    if (rc != XBSA_SUCCESS) {
        ErrorLog(0, taskId, rc, 0, "Unable to create a new transaction\n");
        setStatus(taskId, TASK_ERROR);
        ERROR_EXIT(rc);
    }
    intrans = 1;

    /* Query the backup database for list of volumes to delete */
    for (index = next = 0; index != -1; index = next) {
        rc = ubik_Call_SingleServer(BUDB_GetVolumes, udbHandle.uh_client,
                                    UF_SINGLESERVER, BUDB_MAJORVERSION,
                                    BUDB_OP_DUMPID, tapeName, dumpid, 0,
                                    index, &next, &dbTime, &vl);
        if (rc) {
            if (rc == BUDB_ENDOFLIST)
                break;
            ErrorLog(0, taskId, rc, 0, "Can't find volume info for dump %d\n",
                     dumpid);
            setStatus(taskId, TASK_ERROR);
            ERROR_EXIT(rc);
        }

        /* Delete all volumes on the list */
        for (i = 0; i < vl.budb_volumeList_len; i++) {
            if (dumpEntry.flags & BUDB_DUMP_BUTA) {
                /* dump was from buta, use old buta style names */
                sprintf(dumpIdStr, "/%d", dumpid);
                strcpy(volumeNameStr, "/");
                strcat(volumeNameStr, (char *)vl.budb_volumeList_val[i].name);
            } else {            /* BUDB_DUMP_ADSM */
                /* dump was from butc to ADSM, use butc names */
                strcpy(dumpIdStr, butcdumpIdStr);
                sprintf(volumeNameStr, "/%d", dumpid);
                strcat(volumeNameStr, "/");
                strcat(volumeNameStr, (char *)vl.budb_volumeList_val[i].name);
            }

            rc = xbsa_DeleteObject(&butxInfo, dumpIdStr, volumeNameStr);
            if (rc != XBSA_SUCCESS) {
                ErrorLog(0, taskId, rc, 0,
                         "Unable to delete the object %s of dump %s from the server\n",
                         volumeNameStr, dumpIdStr);
                /* Don't exit if volume was not found */
                if (rc != BUTX_DELETENOVOL) {
                    allnotfound = 0;
                    ERROR_EXIT(rc);
                }
                onenotfound = 1;
            } else {
                allnotfound = 0;
                TLog(0,
                     "Deleted volume %s (%u) in dumpID %u from the backup server\n",
                     vl.budb_volumeList_val[i].name,
                     vl.budb_volumeList_val[i].id, dumpid);
            }
        }

        /* free the memory allocated by RPC for this list */
        if (vl.budb_volumeList_val)
            free(vl.budb_volumeList_val);
        vl.budb_volumeList_len = 0;
        vl.budb_volumeList_val = 0;
    }

  error_exit:
    if (intrans) {
        rc = xbsa_EndTrans(&butxInfo);
        if (rc != XBSA_SUCCESS) {
            ErrorLog(0, taskId, rc, 0,
                     "Unable to terminate the current transaction\n");
            setStatus(taskId, TASK_ERROR);
            ERROR_EXIT(rc);
        }
    }

    /* Switch back to the original server */
    rc = InitToServer(taskId, &butxInfo, NULL);

    if (vl.budb_volumeList_val)
        free(vl.budb_volumeList_val);

    setStatus(taskId, TASK_DONE);
    FreeNode(taskId);           /* free the dump node */
    LeaveDeviceQueue(deviceLatch);

    /* If we don't find any dumps on the server, rather than returning
     * a success, return a failure.
     */
    if (!code && onenotfound && allnotfound) {
        code = BUTX_DELETENOVOL;
        setStatus(taskId, TASK_ERROR);
    }
    return (void *)(uintptr_t)(code);
}
#endif