2 * Copyright 2000, International Business Machines Corporation and others.
5 * This software has been released under the terms of the IBM Public
6 * License. For details, see the LICENSE file in the top-level source
7 * directory or online at http://www.openafs.org/dl/license10.html
11 * A general description of the supergroup changes
14 * In AFS users can be members of groups. When you add
15 * a user, u1, to a group, g1, you add the user id for u1
16 * to an entries list in g1. This is a list of all the
18 * You also add the id for g1 to an entries list in u1.
19 * This is a list of all the groups this user is a
21 * The list has room for 10 entries. If more are required,
22 * a continuation record is created.
24 * With UMICH mods, u1 can be a group. When u1 is a group
25 * a new field is required to list the groups this group
26 * is a member of (since the entries field is used to
27 * list it's members). This new field is supergroups and
28 * has two entries. If more are required, a continuation
30 * There are two additional fields required, nextsg is
31 * an address of the next continuation record for this
32 * group, and countsg is the count for the number of
33 * groups this group is a member of.
37 * 09/18/95 jjm Add mdw's changes to afs-3.3a Changes:
38 * (1) Add the parameter -groupdepth or -depth to
39 * define the maximum search depth for supergroups.
40 * Define the variable depthsg to be the value of
41 * the parameter. The default value is set to 5.
43 * (3) Make sure the sizes of the struct prentry and
44 * struct prentryg are equal. If they aren't equal
45 * the pt database will be corrupted.
46 * The error is reported with an fprintf statement,
47 * but this doesn't print when ptserver is started by
48 * bos, so all you see is an error message in the
49 * /usr/afs/logs/BosLog file. If you start the
50 * ptserver without bos the fprintf will print
52 * The program will terminate with a PT_EXIT(1).
55 * Transarc does not currently use opcodes past 520, but
56 * they *could* decide at any time to use more opcodes.
57 * If they did, then one part of our local mods,
58 * ListSupergroups, would break. I've therefore
59 * renumbered it to 530, and put logic in to enable the
60 * old opcode to work (for now).
62 * 2/1/98 jjm Add mdw's changes for bit mapping for supergroups
64 * Before fetching a supergroup, this version of ptserver
65 * checks to see if it was marked "found" and "not a
66 * member". If and only if so, it doesn't fetch the group.
67 * Since this should be the case with most groups, this
68 * should save a significant amount of CPU in redundant
69 * fetches of the same group. After fetching the group,
70 * it sets "found", and either sets or clears "not a
71 * member", depending on if the group was a member of
72 * other groups. When it writes group entries to the
73 * database, it clears the "found" flag.
76 #if defined(SUPERGROUPS)
78 * A general description of the supergroup changes
81 * In AFS users can be members of groups. When you add a user, u1,
82 * to a group, g1, you add the user id for u1 to an entries list
83 * in g1. This is a list of all the members of g1. You also add
84 * the id for g1 to an entries list in u1. This is a list of all
85 * the groups this user is a member of. The list has room for 10
86 * entries. If more are required, a continuation record is created.
88 * With UMICH mods, u1 can be a group. When u1 is a group a new
89 * field is required to list the groups this group is a member of
90 * (since the entries field is used to list it's members). This
91 * new field is supergroups and has two entries. If more are
92 * required, a continuation record is formed.
94 * There are two additional fields required, nextsg is an address
95 * of the next continuation record for this group, and countsg is
96 * the count for the number of groups this group is a member of.
98 * Bit mapping support for supergroups:
100 * Before fetching a supergroup, this version of ptserver checks to
101 * see if it was marked "found" and "not a member". If and only if
102 * so, it doesn't fetch the group. Since this should be the case
103 * with most groups, this should save a significant amount of CPU in
104 * redundant fetches of the same group. After fetching the group, it
105 * sets "found", and either sets or clears "not a member", depending
106 * on if the group was a member of other groups. When it writes
107 * group entries to the database, it clears the "found" flag.
111 #include <afsconfig.h>
112 #include <afs/param.h>
115 #include <afs/stds.h>
119 #include <sys/types.h>
122 #include <sys/stat.h>
124 #include <winsock2.h>
125 #include <WINNT/afsevent.h>
128 #include <netinet/in.h>
133 #include <rx/rx_globals.h>
136 #include <afs/cellconfig.h>
137 #include <afs/auth.h>
138 #include <afs/keys.h>
139 #include "ptserver.h"
140 #include "ptprototypes.h"
141 #include "error_macros.h"
142 #include "afs/audit.h"
143 #include <afs/afsutil.h>
144 #include <afs/com_err.h>
145 #include <rx/rxstat.h>
147 /* make all of these into a structure if you want */
148 struct prheader cheader;
149 struct ubik_dbase *dbase;
150 struct afsconf_dir *prdir;
152 #if defined(SUPERGROUPS)
153 extern afs_int32 depthsg;
163 int rxkadDisableDotCheck = 0;
165 #define ADDRSPERSITE 16 /* Same global is in rx/rx_user.c */
166 afs_uint32 SHostAddrs[ADDRSPERSITE];
168 static struct afsconf_cell info;
170 extern int prp_group_default;
171 extern int prp_user_default;
173 #include "AFS_component_version_number.c"
176 prp_access_mask(char *s)
179 if (*s >= '0' && *s <= '9') {
180 return strtol(s, NULL, 0);
183 while (*s) switch(*s++)
185 case 'S': r |= PRP_STATUS_ANY; break;
186 case 's': r |= PRP_STATUS_MEM; break;
187 case 'O': r |= PRP_OWNED_ANY; break;
188 case 'M': r |= PRP_MEMBER_ANY; break;
189 case 'm': r |= PRP_MEMBER_MEM; break;
190 case 'A': r |= PRP_ADD_ANY; break;
191 case 'a': r |= PRP_ADD_MEM; break;
192 case 'r': r |= PRP_REMOVE_MEM; break;
197 /* check whether caller is authorized to manage RX statistics */
199 pr_rxstat_userok(struct rx_call *call)
201 return afsconf_SuperUser(prdir, call, NULL);
205 main(int argc, char **argv)
207 register afs_int32 code;
209 register struct hostent *th;
211 struct rx_service *tservice;
212 struct rx_securityClass *sc[3];
214 struct ktc_encryptionKey tkey;
216 int kerberosKeys; /* set if found some keys */
218 char clones[MAXHOSTSPERCELL];
219 afs_uint32 host = htonl(INADDR_ANY);
221 const char *pr_dbaseName;
222 char *whoami = "ptserver";
227 char *auditFileName = NULL;
231 * The following signal action for AIX is necessary so that in case of a
232 * crash (i.e. core is generated) we can include the user's data section
233 * in the core dump. Unfortunately, by default, only a partial core is
234 * generated which, in many cases, isn't too useful.
236 struct sigaction nsa;
238 sigemptyset(&nsa.sa_mask);
239 nsa.sa_handler = SIG_DFL;
240 nsa.sa_flags = SA_FULLDUMP;
241 sigaction(SIGABRT, &nsa, NULL);
242 sigaction(SIGSEGV, &nsa, NULL);
245 osi_audit(PTS_StartEvent, 0, AUD_END);
247 /* Initialize dirpaths */
248 if (!(initAFSDirPath() & AFSDIR_SERVER_PATHS_OK)) {
250 ReportErrorEventAlt(AFSEVT_SVR_NO_INSTALL_DIR, 0, argv[0], 0);
252 fprintf(stderr, "%s: Unable to obtain AFS server directory.\n",
257 pr_dbaseName = AFSDIR_SERVER_PRDB_FILEPATH;
259 #if defined(SUPERGROUPS)
260 /* make sure the structures for database records are the same size */
261 if ((sizeof(struct prentry) != ENTRYSIZE)
262 || (sizeof(struct prentryg) != ENTRYSIZE)) {
264 "The structures for the database records are different"
265 " sizes\n" "struct prentry = %d\n" "struct prentryg = %d\n"
266 "ENTRYSIZE = %d\n", sizeof(struct prentry),
267 sizeof(struct prentryg), ENTRYSIZE);
272 for (a = 1; a < argc; a++) {
274 lcstring(arg, argv[a], sizeof(arg));
276 if (strcmp(argv[a], "-d") == 0) {
277 if ((a + 1) >= argc) {
278 fprintf(stderr, "missing argument for -d\n");
281 debuglevel = atoi(argv[++a]);
282 LogLevel = debuglevel;
283 } else if ((strncmp(arg, "-database", alen) == 0)
284 || (strncmp(arg, "-db", alen) == 0)) {
285 pr_dbaseName = argv[++a]; /* specify a database */
286 } else if (strncmp(arg, "-p", alen) == 0) {
287 lwps = atoi(argv[++a]);
288 if (lwps > 16) { /* maximum of 16 */
289 printf("Warning: '-p %d' is too big; using %d instead\n",
292 } else if (lwps < 3) { /* minimum of 3 */
293 printf("Warning: '-p %d' is too small; using %d instead\n",
297 } else if (strncmp(arg, "-rebuild", alen) == 0) /* rebuildDB++ */
299 #if defined(SUPERGROUPS)
300 else if ((strncmp(arg, "-groupdepth", alen) == 0)
301 || (strncmp(arg, "-depth", alen) == 0)) {
302 depthsg = atoi(argv[++a]); /* Max search depth for supergroups */
305 else if (strncmp(arg, "-default_access", alen) == 0) {
306 prp_user_default = prp_access_mask(argv[++a]);
307 prp_group_default = prp_access_mask(argv[++a]);
309 else if (strncmp(arg, "-restricted", alen) == 0) {
312 else if (strncmp(arg, "-rxbind", alen) == 0) {
315 else if (strncmp(arg, "-allow-dotted-principals", alen) == 0) {
316 rxkadDisableDotCheck = 1;
318 else if (strncmp(arg, "-enable_peer_stats", alen) == 0) {
319 rx_enablePeerRPCStats();
320 } else if (strncmp(arg, "-enable_process_stats", alen) == 0) {
321 rx_enableProcessRPCStats();
324 else if (strncmp(arg, "-syslog", alen) == 0) {
325 /* set syslog logging flag */
327 } else if (strncmp(arg, "-syslog=", MIN(8, alen)) == 0) {
329 serverLogSyslogFacility = atoi(arg + 8);
332 else if (strncmp(arg, "-auditlog", alen) == 0) {
333 auditFileName = argv[++a];
335 } else if (strncmp(arg, "-audit-interface", alen) == 0) {
336 char *interface = argv[++a];
337 if (osi_audit_interface(interface)) {
338 printf("Invalid audit interface '%s'\n", interface);
342 else if (!strncmp(arg, "-rxmaxmtu", alen)) {
343 if ((a + 1) >= argc) {
344 fprintf(stderr, "missing argument for -rxmaxmtu\n");
347 rxMaxMTU = atoi(argv[++a]);
348 if ((rxMaxMTU < RX_MIN_PACKET_SIZE) ||
349 (rxMaxMTU > RX_MAX_PACKET_DATA_SIZE)) {
350 printf("rxMaxMTU %d invalid; must be between %d-%" AFS_SIZET_FMT "\n",
351 rxMaxMTU, RX_MIN_PACKET_SIZE,
352 RX_MAX_PACKET_DATA_SIZE);
356 else if (*arg == '-') {
357 /* hack in help flag support */
359 #if defined(SUPERGROUPS)
361 printf("Usage: ptserver [-database <db path>] "
362 "[-auditlog <log path>] "
363 "[-audit-interface <file|sysvmq> (default is file)] "
364 "[-syslog[=FACILITY]] [-d <debug level>] "
365 "[-p <number of processes>] [-rebuild] "
366 "[-groupdepth <depth>] "
367 "[-restricted] [-rxmaxmtu <bytes>] [-rxbind] "
368 "[-allow-dotted-principals] "
369 "[-enable_peer_stats] [-enable_process_stats] "
370 "[-default_access default_user_access default_group_access] "
372 #else /* AFS_NT40_ENV */
373 printf("Usage: ptserver [-database <db path>] "
374 "[-auditlog <log path>] "
375 "[-audit-interface <file|sysvmq> (default is file)] "
376 "[-d <debug level>] "
377 "[-p <number of processes>] [-rebuild] [-rxbind] "
378 "[-allow-dotted-principals] "
379 "[-default_access default_user_access default_group_access] "
380 "[-restricted] [-rxmaxmtu <bytes>] [-rxbind] "
381 "[-groupdepth <depth>] " "[-help]\n");
385 printf("Usage: ptserver [-database <db path>] "
386 "[-auditlog <log path>] "
387 "[-audit-interface <file|sysvmq> (default is file)] "
388 "[-d <debug level>] "
389 "[-syslog[=FACILITY]] "
390 "[-p <number of processes>] [-rebuild] "
391 "[-enable_peer_stats] [-enable_process_stats] "
392 "[-default_access default_user_access default_group_access] "
393 "[-restricted] [-rxmaxmtu <bytes>] [-rxbind] "
394 "[-allow-dotted-principals] "
396 #else /* AFS_NT40_ENV */
397 printf("Usage: ptserver [-database <db path>] "
398 "[-auditlog <log path>] [-d <debug level>] "
399 "[-default_access default_user_access default_group_access] "
400 "[-restricted] [-rxmaxmtu <bytes>] [-rxbind] "
401 "[-allow-dotted-principals] "
402 "[-p <number of processes>] [-rebuild] " "[-help]\n");
409 #if defined(SUPERGROUPS)
411 fprintf(stderr, "Unrecognized arg: '%s' ignored!\n", arg);
417 osi_audit_file(auditFileName);
418 osi_audit(PTS_StartEvent, 0, AUD_END);
422 serverLogSyslogTag = "ptserver";
424 OpenLog(AFSDIR_SERVER_PTLOG_FILEPATH); /* set up logging */
427 prdir = afsconf_Open(AFSDIR_SERVER_ETC_DIRPATH);
429 fprintf(stderr, "ptserver: can't open configuration directory.\n");
432 if (afsconf_GetNoAuthFlag(prdir))
433 printf("ptserver: running unauthenticated\n");
436 /* initialize winsock */
437 if (afs_winsockInit() < 0) {
438 ReportErrorEventAlt(AFSEVT_SVR_WINSOCK_INIT_FAILED, 0, argv[0], 0);
440 fprintf(stderr, "ptserver: couldn't initialize winsock. \n");
445 gethostname(hostname, sizeof(hostname));
446 th = gethostbyname(hostname);
448 fprintf(stderr, "ptserver: couldn't get address of this host.\n");
451 memcpy(&myHost, th->h_addr, sizeof(afs_int32));
453 /* get list of servers */
455 afsconf_GetExtendedCellInfo(prdir, NULL, "afsprot", &info, &clones);
457 afs_com_err(whoami, code, "Couldn't get server list");
460 pr_realmName = info.name;
461 pr_realmNameLen = strlen(pr_realmName);
465 code = afsconf_GetKey(prdir, 999, &tkey);
467 afs_com_err(whoami, code,
468 "couldn't get bcrypt keys from key file, ignoring.");
472 afs_int32 kvno; /* see if there is a KeyFile here */
473 struct ktc_encryptionKey key;
474 code = afsconf_GetLatestKey(prdir, &kvno, &key);
475 kerberosKeys = (code == 0);
478 ("ptserver: can't find any Kerberos keys, code = %d, ignoring\n",
482 /* initialize ubik */
483 ubik_CRXSecurityProc = afsconf_ClientAuth;
484 ubik_CRXSecurityRock = prdir;
485 ubik_SRXSecurityProc = afsconf_ServerAuth;
486 ubik_SRXSecurityRock = prdir;
487 ubik_CheckRXSecurityProc = afsconf_CheckAuth;
488 ubik_CheckRXSecurityRock = prdir;
490 /* The max needed is when deleting an entry. A full CoEntry deletion
491 * required removal from 39 entries. Each of which may refers to the entry
492 * being deleted in one of its CoEntries. If a CoEntry is freed its
493 * predecessor CoEntry will be modified as well. Any freed blocks also
494 * modifies the database header. Counting the entry being deleted and its
495 * CoEntry this adds up to as much as 1+1+39*3 = 119. If all these entries
496 * and the header are in separate Ubik buffers then 120 buffers may be
498 ubik_nBuffers = 120 + /*fudge */ 40;
502 if (AFSDIR_SERVER_NETRESTRICT_FILEPATH ||
503 AFSDIR_SERVER_NETINFO_FILEPATH) {
505 ccode = parseNetFiles(SHostAddrs, NULL, NULL,
506 ADDRSPERSITE, reason,
507 AFSDIR_SERVER_NETINFO_FILEPATH,
508 AFSDIR_SERVER_NETRESTRICT_FILEPATH);
511 ccode = rx_getAllAddr(SHostAddrs, ADDRSPERSITE);
514 host = SHostAddrs[0];
515 /* the following call is idempotent so if/when it gets called
516 * again by the ubik init stuff, it doesn't really matter
519 rx_InitHost(host, htons(AFSCONF_PROTPORT));
524 ubik_ServerInitByInfo(myHost, htons(AFSCONF_PROTPORT), &info, clones,
525 (char *)pr_dbaseName, &dbase);
527 afs_com_err(whoami, code, "Ubik init failed");
530 #if defined(SUPERGROUPS)
534 sc[0] = rxnull_NewServerSecurityObject();
537 sc[2] = rxkad_NewServerSecurityObject(0, prdir, afsconf_GetKey, NULL);
541 /* Disable jumbograms */
544 if (rxMaxMTU != -1) {
545 rx_SetMaxMTU(rxMaxMTU);
549 rx_NewServiceHost(host, 0, PRSRV, "Protection Server", sc, 3,
551 if (tservice == (struct rx_service *)0) {
552 fprintf(stderr, "ptserver: Could not create new rx service.\n");
555 rx_SetMinProcs(tservice, 2);
556 rx_SetMaxProcs(tservice, lwps);
557 if (rxkadDisableDotCheck) {
558 rx_SetSecurityConfiguration(tservice, RXS_CONFIG_FLAGS,
559 (void *)RXS_CONFIG_FLAGS_DISABLE_DOTCHECK);
563 rx_NewServiceHost(host, 0, RX_STATS_SERVICE_ID, "rpcstats", sc, 3,
564 RXSTATS_ExecuteRequest);
565 if (tservice == (struct rx_service *)0) {
566 fprintf(stderr, "ptserver: Could not create new rx service.\n");
569 rx_SetMinProcs(tservice, 2);
570 rx_SetMaxProcs(tservice, 4);
572 /* allow super users to manage RX statistics */
573 rx_SetRxStatUserOk(pr_rxstat_userok);
576 osi_audit(PTS_FinishEvent, -1, AUD_END);