Since 1.3.77: * Correct deadlock condition in cm_EndCallbackGrantingCall which can be triggered if the volume referenced by the cm_scache_t object is offline. * The AFS Service needs to respond to SERVICE_ACCEPT_SHUTDOWN messages in addition to SERVICE_ACCEPT_STOP. * Move RPC shutdown until after the SMB and RX shutdown procedures complete. Block until RPC shutdown is complete. * Modify afslogon.dll (integrated logon) to wait for service if its state is START_PENDING. If the timeout period occurs, reset to the retry interval and not the sleep interval. * When renewing the server list for a cell obtained via DNS AFSDB records, the cm_cell_t entry must be removed from the list of all cells. Otherwise, the list of cells will be corrupted. * In the dcache and scache modules, use the cm_scache_t dataVersion instead of the cm_fakeDirVersion. * Synchronize fs.c with the unix version. * The variable used to determine whether a file or virtual memory mapped cache is used was not properly initialized to a default value. If the registry setting "NonPersistentCaching" was not set, the choice would be random. Properly initialized to be "file". * The memory mapped view was never unmapped before closing the file at service shutdown. This is now properly cleaned up. * Default location of Cache file is now %TEMP%\AFSCache Since 1.3.76: * A bug affecting new installations of 1.3.75/76 would result in the creating of incorrect mountpoints in the freelance root.afs volume for the default cell. If "fs \\afs\all\" lists a volume name of "root" instead of "root.cell", you have been affected by the bug. To correct the problem, execute the following commands: fs rmmount \\afs\all\ fs rmmount \\afs\all\. fs mkmount \\afs\all\ root.cell fs mkmount \\afs\all\. root.cell -rw Since 1.3.75: * A bug has been fixed in the auto-generation of Freelance root.afs symlinks which produced random entries in the \\AFS\all directory. * Support has been added for multi-homed servers Since 1.3.74: * Added a new registry value, "StoreAnsiFilenames", which can be used to force the use of ANSI character sets instead of OEM Code Pages. This feature is useful when users require the ability to create filenames with 8-bit characters and need to access the files from both Latin-1 based Unix systems as well as from Windows. Activation of this feature will prevent access to files stored with 8-bit OEM characters. * Shutdown all SMB threads in a synchronized manner when stopping the service. * There is currently a maximum cache size of 1.3GB. The limit is imposed by the largest contiguous block of unused memory within the 2GB process space which can be assigned to the memory mapped file. Unfortunately, when the executable digital signature verification code is activated Windows sees fit to further segment the process memory which in turn reduces the size of the maximum cache file to less then 800MB. If larger cache sizes are desired, a new registry value should be set: HKLM\SOFTWARE\OpenAFS\Client (DWORD) "VerifyServiceSignature" = 0x0 Setting this value will disable the runtime verification of digital signatures on afsd_service.exe and the afs dlls which it loads. It will not disable the the version number check on those same files. The signature verification is not a security messure and is only meant to enhance the ability to afsd_service.exe to detect potential destablizing mixtures of DLLs from incompatible distributions. Added code to auto-disable the signature verification check if the desired cache size is greater then 700MB. * Windows' WinTrustVerify(WIN_SPUB_ACTION_PUBLISHED_SOFTWARE) is used to verify the validity of the afsd_service.exe binary as well as each of the AFS DLLs loaded by the service. Not only must the digital signature be valid but the signatures of the DLL must be signed by the same entity as the service. * Implement new functions: cm_freelanceMountPointExists and cm_freelanceSymlinkExists. Use them along with other validity checks in cm_freelanceAddMount and cm_freelanceAddSymlink to ensure that name collisions do not occur and that empty strings are not valid file names. A symlink may not have a name which would resolve to a valid cell name. Doing so would prevent access to the cell. * Add missing cm_HoldSCacheNoLock call to Freelance mount point re-initialization code. The reference counts of the fake root.afs volume scache object(s) would become invalid when the mount point or symlink lists were altered. * Add registry entries to provide mappings from the afsdsbmt.ini to the new locations for applications which count on the use of the old Profile file APIs. These apps are likely to fail if the user does not have administrator privileges and the registry is locked down. * The afs_config.exe submounts dialog had two errors. First, attempts to remove entries failed because the registry key was being opened without KEY_WRITE privileges. Second, when editing a submount entry, changing the name would add a new key and leave the original one in place. Now the original submount will be removed if its name is changed. * In recent months there have been several incidents in which users have experienced problems starting or accessing afsd_service.exe and after significant effort has been spent it has turned out that they have two versions of AFS on the machine or an inconsistent set of DLLs. Code has now been added to afsd_service.exe which will walk the list of modules loaded by afsd_service.exe and validate that the version of the AFS DLLs matches the version of the afsd_service.exe executable. If they do not match the service will not start. * When Freelance mode is enabled and there is no registry key HKLM\SOFTWARE\OpenAFS\Client\Freelance, afsd_service.exe will attempt to import the afs_freelance.ini file contents. If the file does not exist, it was creating a dummy file with a r/o and r/w entry for the default cell and then importing those values. This process has been changed. The temporary file is no longer created. Also, both the OpenAFS Client install directory as well as %WINDIR% are checked for previous afs_freelance.ini files. * Added support for VL_GetEntryByNameN(). Still need to add support for VL_GetEntryByNameU() for multi-homed support. * Fix a deadlock situation in afscreds.exe when canceling an auto-generated Obtain Tokens dialog Since 1.3.72/73: * Fix the locking of objects during Directory Searches in the SMB/CIFS server. The failure to properly lock the reference counts was resulting in the premature freeing of smb_dirSearch_t objects while they were still in use by the SMB/CIFS client. This does not solve the "Invalid Handle" problem. * Fix Find Cell By Name pioctl call to return a valid cell name for the Freelance fake root.afs volume. "Freelance.Local.Root". * Fix the Explorer Shell Extension Symlinks->Add operation. The dialog template was missing and the link destination string was too short. * Add support for symlinks to Freelance root.afs volume Stored at HKLM\SOFTWARE\OpenAFS\Client\Freelance\Symlinks = ":." Use symlink.exe to create, list, or remove * Remove the fallback to the use of KFW's KRB4 library when obtaining tokens. We never obtain KRB4 tickets. * Fix AFS Client Configuration Control Panel to support new SysName protocol. * Fix a bug in afsd_service.exe which could result in the SysName not being read from the registry. Since 1.3.71: * Add code to block the issuance of AFS tokens by aklog.exe or afscreds.exe when the Kerberos 5 principal name contains a dot. * Modify the IsAdmin() function to always treat the local SYSTEM account as an AFS client administrator. Affects fs.exe and afs_config.exe. * Modify the internal handling of Quota Exceeded errors * Upgrade all reference count fields in the Windows cache manager and the osi library to use unsigned long instead of signed short. A similar fix has been applied to the afs rpc (rx) library. * fix the Windows cache manager to prevent it from replacing the rx_connection object associated with the cm_conn_t object on each and every operation if "fs crypt" was set. This explains the dramatic performance difference when crypt is used vs clear. The problem: 'cryptall', a boolean flag indicating whether or not "fs crypt" is set, was being compared to the rx_connection cryptlevel which is either rxkad_clear:0 or rxkad_crypt:2. 1 != 2 and therefore the rx_connection was always destroyed and replaced on each and every operation. Lock the cm_conn_t object around every call to RXAFS_xxxx functions. It is not safe for the cm_conn_t object to not be locked because rx_DestroyConnection might be called from another thread if: - the user's tokens have changed or expired - the crypt mode has changed This fix appears to have also taken care of the problems associated with Overlapped Writes resulting in Delayed Write errors. * fix NSIS installer's AdminGroup.exe to properly create and remove groups when given -create or -remove. The string comparison test was wrong. * fs sysname now accepts a list of sysname values * added a new registry value HKLM\SOFTWARE\OpenAFS\Client "IoctlDebug" DWORD which when set to a non-zero value will cause error message text to be output to stderr from the pioctl() routine. Useful in debugging failures of fs.exe, tokens.exe, etc. * added a test to the power management code to only perform a flush operation if there is at least one network adapter which is not a loopback adapter. * Fix bug in loading of registry value HKLM\SOFTWARE\OpenAFS\Client "EnableKFW". This value will not be read if the key HKCU\SOFTWARE\OpenAFS\Client exists; even if the "EnableKFW" value under that key does not. * provide mechanisms to force the use of krb524d for Kerberos 5 ticket to AFS token conversion. For afslogon.dll and afscreds.exe there is a new registry value "Use524" and for aklog.exe a new command line parameter "-m". * Fix the pattern matching algorithm to properly match patterns ending with a '*'. * smb_ReceiveCoreRename() was factored to produce smb_Rename() which is used by both the original function and the new smb_ReceiveNTRename(). smb_ReceiveNTRename() supports the creation of HardLinks in addition to Renaming. smb_Link() is a new function which creates HardLinks via cm_Link(). cm_Link() is a new vnodeops function which creates links using RXAFS_Link(). smb_ReceiveNTRename() does not support the File Copy and Move Cluster Information operations described in its interface. ReceiveNTRename is under documented in CIFS-TR-1p00_FINAL.pdf. * When opening files via symlinks, we should follow the symlinks until we reach the actual file stat cache entry. The stat cache entry of the file should then be stored in the FID instead of stat scache entry of the symlink. * return bad operation errors for all unimplemented functions even if we do not know the functions exist. * Log bad packets and unknown operation packets to the trace log * Map CM_ERROR_BADOP to STATUS_NOT_SUPPORTED instead of 0xC09820FF * Update list of known CIFS operations to include all those listed in CIFS-TR-1p00_FINAL.pdf. * Modify the handling of HKLM\SOFTWARE\OpenAFS\Client\Submounts to support the REG_EXPAND_SZ type. Since 1.3.70: * A new Windows authorization group "AFS Client Admins" is now created and populated with the members of the "Administrators" group. The group is used to determine which accounts on the machine may be used to modify the AFS Client Configuration via the UI and command line tools. afs_config.exe, fs.exe, * Modify the WinLogon Logoff Event Handler to query NT4 domain controllers for the remote profile path if Active Directory services are not available. * Fix aklog.exe to not add the AFS ID to the username * PTS registration of new users to foreign cells has been added to afscreds.exe * The cm_Daemon thread is used to perform checks for down servers, up servers, volumes, callback expirations, lock maintenance and token expiration. Due to a gaff in larger integer division the thread never performed any work. Instead the current time computation would always be less then the trigger times. This had an adverse affect on the client's ability to maintain communication with servers, keep volumes up to date, and flush user tokens and acls when they have expired. This was broken when the 1.3 branch was modified to support VC7 which no longer included largeint.lib * An initialization problem with the Freelance code was detected while fixing the callbackRequest. The cm_rootSCachep object is obtained during afsd_InitDaemons() but the callback information is incomplete. The callback information will not be obtained until cm_MergeStatus is called from within cm_GetCallback. Unfortunately, cm_SyncOp did not properly test for the conditions under which the callback information must be obtained. * Reports have been filed indicating that callbacks were being lost. An examination of the code indicated that the cm_server_t objects were not being properly reference counted by the cm_scache_t and cm_callbackRequest_t objects. In particular, the cm_server_t objects may have been freed from beneath the cm_conn_t objects. All of the reference counting is now done via the functions: cm_GetServer cm_GetServerNoLock cm_PutServer cm_PutServerNoLock this improves the ability to track the referrals. Each cm_BeginCallbackGranting Call now allocates a reference to the cm_server_t. The cm_EndCallbackGrantingCall either frees the reference or transfers it to the cm_scache_t cbServerp field. These are then appropriately tracked through the cm_Analyze call. * Ensure that the dnlc hash table is the same size as the dir name hash table (as per original author's note). Increase the dnlc CM_AFSNCNAMESIZE to a multiple of 8 for compatibility with 64-bit systems. * fix smb_ApplyV3DirListPatches to properly apply the hidden attribute to dotfiles when the infoLevel < 0x101 and cm_SyncOp has failed. * Fix the Freelance registry initialization code. There was a possibility that some systems could end up with garbage in the registry during a clean install. Since 1.3.66: * file and directory names beginning with "." will now be given the hidden attribute when the volume access is anonymous. this matches the behavior when the volume access is via an authenticated user. * Added a change monitor to the HKLM\SOFTWARE\OpenAFS\Client\Freelance key. When a change occurs mark the root.afs data as invalid and for it to be reloaded on the next access. This allows administrators to modify the mount point list without restarting the service. The freelance client used to provide a fake modification time for the root.afs volume data and its mount points of 7/09/2001 14:24 EDT. Added code to extract the last modification time of the Freelance registry key and use that instead. The time now represents the most recent mount point change. * PTS registration of new users to foreign cells has been added to aklog.exe * Additional Cache Control and Credential Manager options have been added to the WiX installer. See deployment guide for details. * The CachePath setting is now optionally a REG_EXPAND_SZ type * The WiX installer has been upgraded. Version 2.0.1927.1 is now required. * The loopback installation code may have had a problem updating the %ETC%\HOSTS file which could have resulted in a premature failure. Work around code has been added for the case where the file cannot be deleted. * The default max chunksize was increased from 15 (32K) to 17 (128K) because Windows sends 64K blocks when using overlapped writes. * The default number of server threads was increased from 4 to 25 to better handle overlapped writes. * The "AfscredsShortcutParams" registry value was not being properly loaded by afscreds.exe. Therefore, the default value was always being used instead of the value set by the installer. * Windows XP provides downgrade attack detection to prevent an attacker from being able to force the use of NTLM simply by disrupting communication with the KDC. This attack cannot exist between the Windows CIFS client and the AFS Client Service. Therefore, when a downgrade has been detected the afs pioctl library will force the establishment of a new CIFS connection using NTLM. * A locking error was discovered surrounding all references to volume server lists within the cm_cell.c source file. * The logged into Windows username was incorrect on Terminal Server machines. * A new registry value "NonPersistentCaching" was added to the service parameters key. When set to a non-zero value, the afs cache is stored in the Windows paging file. There are two limitations to choosing this option: 1. when persistent caching is implemented it won't work with this flag set since there will be nothing to persist. 2. with this flag set the initial paging allocation cannot be changed while the service is running * An initialization bug was discovered in aklog.exe which affected users who have a domain name for their afs servers which could not be mapped to a realm Since 1.3.65: * afs_config.exe now validates cell names against DNS in addition to the CellServDB file. * In order to allow the freelance client to connect to a volume with ID equal to 1 on the default cell we changed the fake root.afs volume ID once again. This time we choose 0xFFFFFFFF. In addition, we change the cell ID of the fake root.afs volume from 1 to 0xFFFFFFFF as well. It will now be impossible for a volume ID to match that of another cell unless the client is connected to 0xFFFFFFFD cells. That should be enough room for growth. * Fix "fs mkmount" command to work with UNC paths and when started from non-AFS drives. It is now possible to create a mount point in the freelance fake root.afs volume with the command fs mkmount \\AFS\all\ For example, fs mkmount \\AFS\all\openafs.org root.cell openafs.org fs mkmount \\AFS\all\.openafs.org root.cell openafs.org -rw * The algorithm used to re-attempt access to the servers associated with a volume has been altered to properly address the case in which all servers have been marked down. The previous algorithm did not reset the server's down flags so the servers were never actually retried. This caused a problem with active volumes if the network connectivity was lost as could be the case with a network cable removal, wireless drop, or laptop hibernation. With the fix volume access is restored almost instantenously when network connectivity becomes available. * Support for SMB/CIFS browsing has been added to the AFS Client Service SMB server. It is now possible to use "NET VIEW \\AFS" to obtain a listing of AFS submounts and freelance mount points. Support for NETSHAREENUM, NETSHAREGETINFO, NETSERVERENUM2, NETSERVERGETINFO significantly enhances the behavior of AFS volumes within the Explorer Shell. For instance, "AFS" now shows up as server in the Explorer with each submount or freelance mount point visible as a share. The right click menu in each folder now works with full functionality on a consistent basis. * The network provider can be configured to have different behavior depending on the domain that the user logs into. These settings are only relevant when using integrated login. A domain refers to an Active Directory (AD) domain, a trusted Kerberos (non-AD) realm or the local machine (i.e. local account logins). The domain name that is used for selecting the domain would be the domain that is passed into the NPLogonNotify function of the network provider. (see registry.txt for details) * Added a new registry value [HKCU\SOFTWARE\OpenAFS\Client] "Authentication Cell" which may be used to specify a default authentication cell for afscreds.exe which is different from the default cell for the AFS Client Service daemon. * Added a Logoff WinLogon Event Notification function to afslogon.dll. afslogon.dll moved to %WINDIR%\System32\. New registry entries added to register the dll for Winlogon events. The logoff event will now force a call to ktc_ForgetAllTokens() using the context of the user being logged off as long as the user's profile is not loaded from within AFS. If the profile was loaded from AFS we can't release the tokens since the Logoff event is triggered prior to the profile being written back to the its source location. This is now performed in an XP SP2 safe manner. * Windows XP SP2 Internet Connection Firewall interoperability has been added. * The %WINDIR%\afsdsbmt.ini contains four sections: Submounts, Drive Mappings, Active Maps and CSC Policies. The Submounts and CSC policies are now stored in the registry under [HKLM\SOFTWARE\OpenAFS\Client\Submounts] [HKLM\SOFTWARE\OpenAFS\Client\CSCPolicy] The Drive Mappings and Active Maps are stored in the registry under [HKCU\SOFTWARE\OpenAFS\Client\Mappings] [HKCU\SOFTWARE\OpenAFS\Client\Active Maps] There is no automatic migration of this data as it would be impossible to consistently migrate data to user profiles which may not be active when the machine is updated. * The %WINDIR%\afs_freelance.ini contains lists of mountpoints for the fake root.afs volume. For the same reasons as for the cellservdb file, this information should not be in %WINDIR%. This information is now kept under the registry key [HKLM\SOFTWARE\OpenAFS\Client\Freelance] The data from the afs_freelance.ini file will be automatically migrated to the registry on first execution of afsd_service.exe * Keeping the CellServDB file in the location %WINDIR%\afsdcell.ini is troublesome for several reasons. One, it is confusing for those who expect the file to be named "CellServDB" instead of "afsdcell.ini". Two, this file is not a Windows Profile formatted file. Three, applications should not be reading or writing to %WINDIR%. It causes problems for Windows Terminal Server. The new location of CellServDB will be the OpenAFS Client install directory which is by default C:\Program Files\OpenAFS\Client and can be determined by querying the registry for [HKLM\SOFTWARE\TransarcCorporation\AFS Client\CurrentVersion]PathName The existing afsdcell.ini will be migrated by the NSIS installer. The Wix installer must still be updated to do the same. * Change NSIS installer to use DNS by default; to remove Integrated Logon High Security mode; and to add Terminal Services compatibility registry entries to allow the OpenAFS tools to find the afsdcell.ini and other configuration files in %WINDIR%. * Add support for authenticated SMB connections. This will remove the need for high security mode in most situations. Both NTLM and Extended Security (GSS SPNEGO) modes are supported. Effectively, only NTLM can be used even though Kerberos is now supported. The reason is that it is not possible to construct a service principal which is unique to each individual machine. SMB Extended Auth does not work on XP SP2 unless one of two registry modifications are made: (1) To disable the check for matching host names on loopback connections set this key. This does not require a reboot: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa] "DisableLoopbackCheck"=dword:00000001 (2) To add the AFS SMB/CIFS service name to an approved list. This does require a reboot: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0] "BackConnectionHostNames"=multi-sz "AFS" "MACHINE-AFS" afsd_service.exe will automatically add the current Netbios Name to the BackConnectionHostNames list and then temporarily disable the loopback check for one cycle of startup/shutdown of the service. We assume most folks do not start/stop without a reboot so this will be adequate in most cases. * Fix security hole in afslogon.dll which allowed passwords to be sent in clear text to the KDC in a misformed principal name. * Fix cm_GetCell() to properly handle expired dns entries without crashing * If Freelance mode is active and the afs_freelance.ini file does not exist, do not create an empty file. Instead create a file containing ro and rw mountpoints to the default cell using the standard conventions. * Modify the Freelance support to handle the ability to create rw mount points in the fake root.afs volume. * Changed the RPC mechanism used for token setting from named pipes to local. Use of named pipes can be restored by setting the environment variable AFS_RPC_PROTSEQ to "ncacn_np". Named pipes were required when a Windows 9x system was using a NT system in gateway mode which is incompatible with our use of local loopback adapters. * In afscreds.exe, if a username of the form user@REALM is specified and no password is specified, do not perform a kinit operation. Only perform the aklog functionality. * Add a new registry value which allows the number of processors on which afsd_service.exe executes to be restricted. Valid values are 1..numOfProcessors HKLM\SYSTEM\CurrentControlSet\Services\TransarcAfsDaemon\Parameters (DWORD) MaxCPUs Since 1.3.64: * A second MSI based installer option is now available. * Fixed Kerberos 5 kinit functionality in afscreds.exe to properly request tickets for user/instance@REALM instead of just user@REALM * Modify the Power Management Notify routine to wait for the Hard Dead timeout period instead of a fixed 19 seconds. With the longer timeout periods Hibernation and Standby could never succeed when network connectivity is not available. * The following fs.exe commands are now restricted to Administrator: - checkservers with a non-zero timer value - setcachesize - newcell - sysname with a new sysname list - exportafs - setcell - setserverprefs - storebehind - setcrypt - cscpolicy - trace setting the default sysname for a machine should be done via the registry and not via "fs sysname". * NSIS installer adds options to install Debugging Symbols and the Microsoft Loopback Adapter; the user is now also given the ability to select the afscreds.exe startup options. * Build system modified to generate symbols for FREE (aka RELEASE) builds as well as CHECKED (aka DEBUG) builds * Sites which have a volume ID of 0x20000001 assigned to their root.cell volumes have been experiencing problems with accessing the root.cell volume of their cell when Freelance mode has been active. This was because 0x20000001 was assigned to the fake root.afs volume created by freelance. The fake volume id is now set to 0x00000001 to prevent conflicts. * The timeout logic in the AFS Client Service has been wrong for sometime. It is based on two different assumptions. First, the SMB client timeout is a fix value as was the case with OS/2 Lan Manager. This assumption is incorrect. The SMB timeout in Windows is a dynamic value computed based upon a fixed minimum timeout to which is added time based upon the size of the request and the performance characteristics of the connection. Second, it is the responsibility of the SMB Server to enforce the timeout requirements of the client. This is untrue. The SMB Server cannot be expected to know the requirements of the client. More importantly, if the SMB server uses the SMB client timeout as a value to restrict its behavior as an RX client, the performance characteristics of the local SMB session would be used to prematurely terminate WAN connections with significantly different performance characteristics. The timeout logic has therefore been modified in the following manner: . the Lan Manager Workstation (SMB) Session Timeout is used only as a basis for configuring the Connection Dead Timeout and Hard Dead Timeout values. The Connection Dead Timeout must be at least 15 seconds longer than the SMB Timeout and the Hard Dead Timeout must be at least double the Connection Dead Timeout. . New registry entries have been added to allow the Connection Dead Timeout and Hard Dead Timeout values independent of the Lan Manager Workstation Session Timeout . The test to enforce the SMB Client Timeout has been removed. One of the side-effects of removing the enforcement of the SMB Client Timeout is that regardless of whether or not the SMB client is available to receive the response (and how would the SMB server know) the RX protocol response can be used to update the AFS Client Service state for ready access by future SMB client requests. This should be the end of the "Server paused or restarting messages" * Add support for arbitrary UNC paths to the pioctl() support. This enables the fs commands as well as the AFS Shell Extension to work correctly when UNC paths are being used. * Fix afscreds.exe (by updating afskfw.lib) to search for cells via DNS if the cell configuration cannot be determined via CellServDB * Add debug info to test whether CM_BUF_WAITING or CM_SCACHE_WAITING are ever set more than once at a time * Fix the management of lists of cm_cell_t structures when using DNS to lookup cell information. The previous code would fail to reuse the same cellID for a cell if DNS was used more than once for a given cell name. When the ttl expired, a single cm_cell_t could be inserted into the cm_allCellsp list more than once producing a loop. In addition, the vlServerp list belonging to the cell was not freed resulting in improper refCounting of the servers. * Add DNS support to cm_IoctlNewCell() which previous only examined the CellServDB file * Add cm_FreeServer() function and call it from cm_FreeServerList() to properly garbage collect cm_server_t objects * Add numVCs variable to smb.c to track the number of smb_vc_t objects created and use it to initialize the vcID field which previously was set to 0 in all objects resulting in FindByID collisions. * Fixed DNS lookups to work consistently throughout the OpenAFS product instead of just from within the afsd_service.exe * Added a runtime check to ensure that AFS Client Service SMB Server is accepting connections before attempting to mount global drives. * Read IP addresses for volume servers out of the CellServDB file if gethostbyname() on the hostname fails. * Fix getcellconfig() to populate both the Hostnames as well as IP addresses when loading cell data via DNS * Increase the Connection Dead Time to 50 from 20 seconds Increase the Hard Dead Time to 120 from 40 seconds (matches the Unix values) * Fixed an assertion validating the number of allocated NCBs * Fixed the build environment to consistently build for Windows 2000 and above. (APPVER = 5.0) * Fixed rx_debug to properly validate the receipt in incoming data with select() and recvfrom(). Do not copy data out of the socket buffer unless success is indicated. Since 1.3.63: * afsd_service.exe will now display a message box to the desktop when it terminates due to an IP Address Change. * installer no longer deletes AFS Server configuration data on uninstall * installer generates a warning dialog if the RPC service is not properly configured * installer compressed with lzma instead of bzip2 * afsd_service.exe shutdown crash solved once and for all * reference counting of smb_vc_t data structures improved * name space collision of smb_fid_t event objects corrected * the output of "fs memdump" is now written to %WINDIR%\TEMP\afsd_alloc.log * the file TaAfsApp_1033.dll is now properly installed allowing the User Manager to start * a new algorithm is used for computing filename pattern matches * afscreds.exe now accepts user names containing instance fields. * Fix the Directory Name Lookup Cache to be case-sensitive. This is crucial in environments in which a Windows client is accessing a directory with more than one filename that differs only by case. If the directory contains "FOO" and "Foo". You want "DEL Foo" to delete the correct one. We still have a problem in that "DEL foo" will delete a random filename. This will be addressed in a future release. * Fix afscreds.exe -M option (renewMaps) to work when High Security mode is off. Also, remember to disable the ActiveMap flag in afsdsbmt.ini when a drive mapping is removed. * Updates to NSIS installer script. AFS Server configuration data will not be destroyed on un-install or re-install. Use a better compression algorithm. * afslogon.dll now uses KFW to obtain tokens when available * afslogon.dll when given an all uppercase username will attempt to authenticate with both the uppercase name and an all lowercase variation * DST modification removed. The fix appears to make things worse after a reboot of the machine. * fs.exe: added "cscpolicy" which is used to change client side caching policy for AFS shares Usage: fs cscpolicy [-share ] [-manual] [-programs] [-documents] [-disable] [-help] * Several uninitialized variables have been initialized * It is now possible to obtain tokens using cross realm Kerberos within afscreds.exe: cell: dementia.org user: jaltman@ATHENA.MIT.EDU password: xxxxxxxx Will obtain a cross realm ticket for jaltman/DEMENTIA.ORG@ATHENA.MIT.EDU will will in turn be used to obtain afs@DEMENTIA.ORG. The resulting token will be stored with the display name jaltman@ATHENA.MIT.EDU@dementia.org * aklog.exe has been added to the client Usage: aklog [-d] [[-cell | -c] cell [-k krb_realm]] [[-p | -path] pathname] [-noprdb] [-force] [-5 | -4] -d gives debugging information. krb_realm is the kerberos realm of a cell. pathname is the name of a directory to which you wish to authenticate. -noprdb means don't try to determine AFS ID. -5 or -4 selects whether to use Kerberos V or Kerberos IV. (default is Kerberos V) No commandline arguments means authenticate to the local cell. Since 1.3.62: * All of the resource files have been restructured to adhere to a set of rules IBM implemented for loading string resources. These rules had either been forgotten or were not discovered by folks working on the OpenAFS sources. The end result was memory corruption. This is primary item which was preventing the AFS Server from working. * Increased the size of the maximum ticket size stored in a token from 344 bytes to 12,000. Increased the buffers used to convey messages between the pioctl() caller and the SMB Server from 1000 bytes to 12,512. The code appeared to have been writing above the top of the stack by quite a few number of bytes. (The increased ticket size is necessary for the next item.) * When obtaining AFS Tokens via KFW, krb524 is no longer required. Instead the raw Kerberos 5 ticket is used in its entirety. This is extremely important as it allows us to use pure Kerberos 5 KDCs as the source of the AFS authentication. The use of up to 12,000 byte tickets will allow tickets produced by all versions of Microsoft Active Directory to be used. - create a user account. - designate it DES only - disable pre-auth - specify its UPN to be "afs@realm" - assign a SPN of "afs/cellname" to the UPN with setspn.exe * Do not enforce the funky 8dot3 pattern matching rule that the first "." is special when using long file names. (you must use "*.*" and not "*") Instead only enforce it when performing 8dot3 searches. * Fixed the DST problem with creation times being set one hour ahead * Fixed the problem when using \\afs\cell-alias. For example, \\afs\uncc instead of \\afs\uncc.edu. Do not a new cell struct for the alias name; instead simply expand the name. One of the symptoms of this problem was a loss of acquired tokens. * Fixed the AFS Shell Extension. The Symbolic Link menu was empty of strings. (Only English strings provided.) * Fixed the installer to properly replace in use files. * Fixed the build system to cleanup generated component version files * The release build compiled with MSVC 6.0 compiler to avoid the afsd_service.exe shutdown crash. This does not solve the problem but simply avoids it for the time being. Since 1.3.61: * fix afslogon.dll to not corrupt memory when High Security mode is not used. * fix afsd_service.exe to not attempt to restore the stack when an exception occurs. (not safe in multi-threaded programs) * fix uninstaller to properly remove the CRT and MFC DLLs * remove a Message Box from afscreds.exe when getcellconfig() fails on a kerberos realm which is not a cell The following is a list of changes to the OpenAFS for Window client since 1.3.60. * "fs setserverprefs" will leave afsd service deadlocked * "vos listaddrs" will core dump * installer sets the appropriate keys to support Integrated Logon * installer disables the "Find Lana by Name" functionality as it was causing headaches for many users * fix the intermittent crash of the power management thread when shutting down the AFS Client Service * optimizes the obtain drive mount list functionality which is executed every time the mount tab in afscreds.exe and afs_config.exe are refreshed. (this happens a lot) * fix the service shutdown logic. add the STOP_PENDING state and do not accept additional service events after we declare ourselves STOPPED. The following is a list of changes to the OpenAFS for Window client since 1.2.10. * flexelint was run against the source tree and hundreds (perhaps thousands) of corrections were applied to ensure prototypes were in use; types were used consistently; variables were initialized; unused variables were removed; etc. * A wide variety of instrumentation was added including the ability to produce a stack trace from within afsd_service.exe when it crashes. * Dynamic configuration of the RDRtimeout value based upon the LanMan Workstation Session Timeout * The mount root no longer needs to be called "/afs". This is now set by a registry value "MountRoot" within the key HKLM\SYSTEM\CurrentControlSet\Services\TransarcAFSDaemon\Parameters * The cell list is now only read out of afsdcell.ini when the file changes instead of each time a cell is resolved. * Thread synchronization was added to cm_server.c and ktc_nt.c * All calls to GlobalAlloc()/GlobalFree() were replaced with calloc()/free(). The Global functions were needed on Windows 3.x but have caused a variety of problems on the Win32 platforms. Avoiding them is highly recommended by several Microsoft Knowledgebase articles * Support for Symbolic Links added to the AFS Shell Extension * Added a registry value "OverlayEnabled" to determine if Shell Extension Overlays should be enabled. HKLM\SYSTEM\CurrentControlSet\Services\TransarcAFSDaemon\Parameters * New Build system to support VC6, VC.NET, VC.NET2003 compilers and separate trees for checked and free builds. Build system supports a custom directory src\WINNT\extra which can be used as a grafting location of organization specific additions to the build tree. * New installer built using NSIS 2.0. * Named all kernel objects in order to allow them to be monitored with tools such as SysInternals' ProcExp.exe. * Introduced new EventLog framework for AFSD * Introduced Power Management interface to AFSD for Standby and Hibernate modes to allow cache to be flushed prior to network disconnect * Utilize Win32 DNSQuery API instead of internal routines. This allows DNS SRV queries to be sent to all current domain name servers. Not just one specified in an INI file. DNS is now always activated. * "NetbiosName" registry value may be used to specify a fixed Netbios Name such as "AFS" to be used instead of "HOSTNAME-AFS" when the loopback adapter is in use. If you need to use the old notation with a loopback adapter installed specify a registry entry of "NetbiosName" REG_EXPAND_SZ = "%COMPUTERNAME%-AFS" * Refactor all modules which depend on LAN Adapter and NetbiosName determination in a new library: lanahelper.lib. This allows for consistent behavior throughout the product. * Move the afsd.log and afsd_init.log files to the directory specified by the "TEMP" environment variable. This is usually %WINDIR%\TEMP for services. Added the Date to the log entries. * New registry value "RxMaxMTU" used to limit the size of the RX packets sent by the AFS Client Service to the Server. In order to enable OpenAFS to work across the Cisco IPSec VPN the packet size must be restricted to 1264 or smaller. The latest NSIS installer sets a value of 1260 by default. * New registry value "RxNoJumbo" to disable the use of Jumbo Rx packets. This is not needed in order to work across the Cisco VPN but might be needed for other network environments. This value is not set by the NSIS installer. * New registry value "HideDotFiles" is used to apply the Hidden attribute to files whose names begin with a '.'. This value is set by the NSIS installer. * New registry value "MaxMpxRequests" allows the maximum number of multiplexed sessions to be configured at run time. This value is not set by the NSIS installer. The default value is 50. * New registry value "MaxVCPerServer" allows the maxmimum number of VCs per server to be configured at run time. This value is not set by the NSIS installer. The default value is 100. * New registry value "AllSubmount" allows the "all" submount to be disabled by setting its value to 0x00. * Allow cells names to be valid mount points \\\ * Store the active state of drive mappings in order for afscreds.exe to restore them upon startup * Add exception handling to generate a Stack Trace to the afsd_init.log file if one happens to occur. * Add lots of logging to help detect the cause of invalid SMB packets * Enable Kerberos for Windows to be used to obtain AFS Tokens via conversion of Kerberos 5 "afs" service tickets. Supports auto- renewal of expiring tokens as long as afscreds.exe is running. * New afscreds.exe command line options: -A = autoinit -M = renew drive maps -N = ip address change detection -Z = unmap drives * New registry value "EnableKFW" in {HKCU,HKLM}SOFTWARE\OpenAFS\Client determines whether or not MIT Kerberos for Windows should be used to obtain tokens via Kerberos 5 tickets. * New registry value "AfscredsShortcutParams" in {HKCU,HKLM}SOFTWARE\OpenAFS\Client determines the command line parameters to be specified when "fixing" the AFS Shortcut in the user's startup folder. * The "ShowTrayIcon" registry value has been moved from HKLM\Software\TransarcCorporation\AFS Client\AfsCreds to {HKCU,HKLM}SOFTWARE\OpenAFS\Client * The registry values used to store the token expiration reminders have been moved from HKLM\Software\TransarcCorporation\AFS Client\AfsCreds to {HKCU,HKLM}SOFTWARE\OpenAFS\Client\Reminders * Obtain the Logon User Name from the Explorer key when available * new text document doc\txt\winnotes\registry.txt lists all registry values used by OpenAFS (excluding the AFS Server) * BUG: rx_securityClass objects were not properly reference counted and were never freed. * BUG: reduce the number of conditions under which CM_ERROR_TIMEOUT would be generated. The existence of a server does not imply that it is not down. If all of the servers for a cell are down return CM_ERROR_NOSUCHVOLUME instead. This prevents the Explorer Shell from hanging. * BUG: the directory name lookup cache failed to free the entries in the cache when the name cache entries cycled. The entries in the cache would become dereferenced without being freed. * BUG: fs setserverprefs could be executed without Administrator privileges * BUG: the number of allocated NCB objects (100) exceeded the number which could actually be waited upon by the kernel (64). Any objects which were utilized above the limit could never have event completions detected. * BUG: smb_username_t objects were not being reference counted and were not properly freed. * BUG: smb_tid_t objects could under unusual circumstances be freed before they were no longer referenced. * BUG: smb_fid_t object pointer were frequently used even when their value could be NULL. They were not properly released and therefore they were never freed. * BUG: smb_packet_t data structures were not completely initialized upon creation * BUG: when Rx produces a CM_ERROR_NOIPC error do not return "Access Denied" because that causes the Explorer Shell to try again until access is obtained. Instead return "Remote Resources" which allows the shell to move on and treat the error as transient. * BUG: when initializing the NCBreturns structure, separate Event objects were created for each NCB although a single Event object was supposed to be shared by all. * BUG: smb_dirSearch_t objects were not being properly referenced counted or freed. * BUG: smb_tran2Packet_t objects were not being properly referenced counted or freed. * BUG: directory path creation did not handle the case of multiple directories requiring creation in one attempt * BUG: SMB requests which required an Extended Response were ignored. This prevented some files from being written to AFS volumes. * BUG: character strings were being freed even after they were inserted into in use data structures * BUG: inconsistent usernames were used when High Security mode was enabled. (there is still much to do in this area) * BUG: pioctl() calls which require out of band RPC operations were susceptible to race conditions when performed by multiple processes * BUG: memory allocation and deallocation crossed instances of the C Runtime Library producing memory leakage and corruption in afscreds and the client configurator.