DESTDIR=dest/
SRCDIR=${DESTDIR}
INSTALL=${SRCDIR}bin/install
-WASHTOOL=${SRCDIR}bin/washtool
-#WASHTOOLRCSUPDATE=${WASHTOOL} rcsupdate
-WASHTOOLCMD=$(MAKE)
-WASHTOOLFLAGS=-argument install
+MKDIR_IF_NEEDED=[ -d $$1 ] || mkdir -p $$1
-COMPILE_PART1=${WASHTOOL} ${WASHTOOLCMD}
-COMPILE_PART2=${WASHTOOLFLAGS}
+# Systype-generic items
+SYS_NAME=@AFS_SYSNAME@
+MKAFS_OSTYPE=@MKAFS_OSTYPE@
-MKDIR_IF_NEEDED=[ -d $$1 ] || mkdir -p $$1
+# Systype-specific items
+LINUX_KERNEL_PATH=@LINUX_KERNEL_PATH@
+LINUX_VERSION=@LINUX_VERSION@
+
+# Other items
+LIB_AFSDB=@LIB_AFSDB@
# Enable build+install of obsolete and insecure packages
# Set to anything other than YES, or comment out to disable the build
-WITH_OBSOLETE=YES
-WITH_INSECURE=YES
+WITH_OBSOLETE=@WITH_OBSOLETE@
+WITH_INSECURE=@WITH_INSECURE@
# To compile AFS from scratch in the src tree run "make SYS_NAME=<type>".
# This recursively calls "make install ..." and does not depend on the
all:
set ${SYS_NAME}/dest; $(MKDIR_IF_NEEDED)
- $(MAKE) install "COMPILE_PART1=cd obj; cd" "COMPILE_PART2=; $(MAKE) install SYS_NAME=${SYS_NAME} DESTDIR=`pwd`/${SYS_NAME}/dest/ SRCDIR=`pwd`/${SYS_NAME}/dest/ TOP_SRCDIR=`pwd`/${SYS_NAME}/obj" "COMPILE_PART3=; $(MAKE) SYS_NAME=${SYS_NAME} DESTDIR=`pwd`/${SYS_NAME}/dest/ SRCDIR=`pwd`/${SYS_NAME}/dest/ TOP_SRCDIR=`pwd`/${SYS_NAME}/obj" SYS_NAME=${SYS_NAME} "WASHTOOL=echo No washtool: "
-
-basics:
- -if test -f "${WASHTOOL}"; \
- then \
- ${WASHTOOL} project . . -noretarget; \
- ${WASHTOOL} destdir; \
- fi
-# test -d ${DESTDIR}
+ $(MAKE) install "COMPILE_PART1=cd src; cd" "COMPILE_PART2=; $(MAKE) install SYS_NAME=${SYS_NAME} DESTDIR=`pwd`/${SYS_NAME}/dest/ TOP_SRCDIR=@TOP_SRCDIR@ SRCDIR=`pwd`/${SYS_NAME}/dest/" "COMPILE_PART3=; $(MAKE) test SYS_NAME=${SYS_NAME} DESTDIR=`pwd`/${SYS_NAME}/dest/ TOP_SRCDIR=@TOP_SRCDIR@ SRCDIR=`pwd`/${SYS_NAME}/dest/" "COMPILE_CLEAN=; $(MAKE) clean SYS_NAME=${SYS_NAME} DESTDIR=`pwd`/${SYS_NAME}/dest/ TOP_SRCDIR=@TOP_SRCDIR@ SRCDIR=`pwd`/${SYS_NAME}/dest/" SYS_NAME=${SYS_NAME}
-minproject: basics
- ${WASHTOOL} project . . -noretarget
- ${WASHTOOL} destdir
+project: cmd comerr
-project: basics cmd comerr minproject # try and initialize project
-
-config: basics
+config:
${COMPILE_PART1} config ${COMPILE_PART2}
-pinstall: basics config
+pinstall: config
${COMPILE_PART1} pinstall ${COMPILE_PART2}
-procmgmt: basics config pinstall
+procmgmt: config pinstall
${COMPILE_PART1} procmgmt ${COMPILE_PART2}
-util: basics pinstall procmgmt
+util: pinstall procmgmt
${COMPILE_PART1} util ${COMPILE_PART2}
-kernutil: basics pinstall
- ${COMPILE_PART1} util ${COMPILE_PART3} kinstall
-
-audit: basics pinstall rx rxkad fsint
+audit: pinstall rx rxkad fsint
${COMPILE_PART1} audit ${COMPILE_PART2}
-comerr: basics util
+comerr: util
${COMPILE_PART1} comerr ${COMPILE_PART2}
-cmd: basics comerr
+cmd: comerr
${COMPILE_PART1} cmd ${COMPILE_PART2}
@case ${SYS_NAME} in \
sgi_6* | sun4x_57 | sun4x_58 | hp_ux11* | sparc64_linux* | alpha_linux* ) \
lwp: project util
${COMPILE_PART1} lwp ${COMPILE_PART2}
-rxgen: minproject pinstall
+rxgen: pinstall
${COMPILE_PART1} rxgen ${COMPILE_PART2}
rxobj:
- ${WASHTOOL} object rx
kernrx:
${COMPILE_PART1} rx ${COMPILE_PART2}
rxstat: rx
${COMPILE_PART1} rxstat ${COMPILE_PART2}
-krxstat:
- ${COMPILE_PART1} rxstat ${COMPILE_PART3} kinstall
-
rxincls: rxobj
- ${COMPILE_PART1} rx ${COMPILE_PART3} kinstall
+ ${COMPILE_PART1} rx ${COMPILE_PART2}
rxtests: rxobj
- ${COMPILE_PART1} rx ${COMPILE_PART3} test
+ ${COMPILE_PART1} rx ${COMPILE_PART3}
fsint: project kfsint
- ${COMPILE_PART1} fsint ${COMPILE_PART2}
-kfsint: rxgen rxincls
- ${COMPILE_PART1} fsint ${COMPILE_PART3} kinstall
+kfsint: rxgen rxincls lwp
+ ${COMPILE_PART1} fsint ${COMPILE_PART2}
export2: project fsint
-export: minproject kfsint
+export: fsint
@case ${SYS_NAME} in \
rs_aix*) \
${COMPILE_PART1} export ${COMPILE_PART2} ;; \
* ) echo skipping export for ${SYS_NAME} ;; \
esac
-afs: project export
+afs: export
${COMPILE_PART1} afs ${COMPILE_PART2}
-des: minproject config
- if [ -f "obj/des/Makefile" ] ; then \
- ${COMPILE_PART1} des ${COMPILE_PART2} ; \
- else \
- ${COMPILE_PART1} des_stub ${COMPILE_PART2} ; \
- fi
+des: config
+ ${COMPILE_PART1} des ${COMPILE_PART2}
sys: project des rx rxstat fsint
${COMPILE_PART1} sys ${COMPILE_PART2}
rxkad: project des
- ${WASHTOOL} object rxkad
- ${WASHTOOL} object rxkad/domestic
${COMPILE_PART1} rxkad ${COMPILE_PART2}
-kernrxkad: minproject
- ${WASHTOOL} object rxkad
- ${WASHTOOL} object rxkad/domestic
- ${COMPILE_PART1} rxkad ${COMPILE_PART3} kinstall
-
kernauth:
${COMPILE_PART1} auth ${COMPILE_PART2}
ubik: project auth
${COMPILE_PART1} ubik ${COMPILE_PART2}
-# cd obj/ubik; $(MAKE) test SYS_NAME=${SYS_NAME}
ubiktests: ubik sys
${COMPILE_PART1} ubik ${COMPILE_PART3}
dauth: project ubik cmd auth comerr
${COMPILE_PART1} dauth ${COMPILE_PART2}
-kernacl:
- ${COMPILE_PART1} libacl ${COMPILE_PART3} kinstall
-
libacl: project ptserver
${COMPILE_PART1} libacl ${COMPILE_PART2}
-kerndir: minproject
- ${COMPILE_PART1} dir ${COMPILE_PART3} kinstall
+kerndir:
+ ${COMPILE_PART1} dir ${COMPILE_PART2}
-dir: project
+dir: project libacl
${COMPILE_PART1} dir ${COMPILE_PART2}
-vol: project dir afs
+# Removed from sgi_* case below:
+# ${COMPILE_PART1} sgiefs ${COMPILE_PART2};;
+sgiefs:
+ case ${SYS_NAME} in \
+ sgi_*) \
+ echo "SGI efs not supported" ;; \
+ *) \
+ echo No efs stuff for ${SYS_NAME};; \
+ esac
+
+vol: project dir afs sgiefs
${COMPILE_PART1} vol ${COMPILE_PART2}
vlserver: project vol audit
${COMPILE_PART1} vlserver ${COMPILE_PART2}
-kvlserver: minproject
- ${COMPILE_PART1} vlserver ${COMPILE_PART3} kinstall
-
viced: project vlserver audit
${COMPILE_PART1} viced ${COMPILE_PART2}
# ${COMPILE_PART1} vfscksol25 ${COMPILE_PART2} ;;
# ${COMPILE_PART1} vfscksol26 ${COMPILE_PART2} ;;
# ${COMPILE_PART1} vfscksol27 ${COMPILE_PART2} ;;
-vfsck: minproject vol
+vfsck: vol
set -x; \
case ${SYS_NAME} in \
sgi_* | *linux* | rs_aix42 | ppc_darwin* | hp_ux* | *fbsd* ) \
sgi_* ) \
${COMPILE_PART1} sgistuff ${COMPILE_PART2} ;; \
rs_aix42 ) \
- ${WASHTOOL} object login ; \
${COMPILE_PART1} tsm41 ${COMPILE_PART2} ;; \
alpha_dux* ) \
${COMPILE_PART1} sia ${COMPILE_PART2} ;; \
KERNELDIR= \
afs \
- kerndir \
- kfsint \
- kernrxkad \
- kernutil \
- kernacl \
- kvlserver \
- krxstat
+ dir \
+ rx \
+ fsint \
+ auth \
+ rxkad \
+ util \
+ libacl \
+ vlserver \
+ sgiefs \
+ rxstat
UKERNELDIR= \
rxstat
-libafs: minproject libafs_setup ${KERNELDIR}
+libafs: libafs_setup ${KERNELDIR}
${COMPILE_PART1} libafs ${COMPILE_PART2}
-libuafs: minproject libuafs_setup ${UKERNELDIR}
+libuafs: libuafs_setup ${UKERNELDIR}
set -x; \
case ${SYS_NAME} in \
hp_ux102* ) \
${COMPILE_PART1} libuafs ${COMPILE_PART2} ;; \
esac
-afsweb: minproject kauth dauth
+afsweb: kauth dauth
${COMPILE_PART1} afsweb ${COMPILE_PART2}
update: project auth
afsmonitor: project gtx xstat
${COMPILE_PART1} afsmonitor ${COMPILE_PART2}
-#
-# Washtool internal targets
-#
-ircs: project
- case ${SYS_NAME} in \
- sgi_* ) \
- echo skip ircs for ${SYS_NAME} ;; \
- *) \
- ${COMPILE_PART1} ircs ${COMPILE_PART2} ;; \
- esac
-
-wash: project
- case ${SYS_NAME} in \
- sgi_* ) \
- echo skip wash for ${SYS_NAME} ;; \
- *) \
- ${COMPILE_PART1} wash ${COMPILE_PART2} ;; \
- esac
-
tests: rxtests ubiktests
# pthread based user space RX library
case ${SYS_NAME} in \
alpha_dux*|sgi_*|sun4x_*|rs_aix*|*linux*|hp_ux110) \
$(MAKE) libadmin_real SYS_NAME=$(SYS_NAME) \
- WASHTOOL="$(WASHTOOL)" \
COMPILE_PART1="$(COMPILE_PART1)" \
COMPILE_PART2="$(COMPILE_PART2)" \
+ TOP_SRCDIR=@TOP_SRCDIR@ \
SRCDIR=$(SRCDIR) DESTDIR=$(DESTDIR) \
DBG_DEFS=$(DBG_DEFS) ;; \
*) \
# Use washtool to ensure MakefileProto is current and obj/libafs exists.
-libafs_setup: config minproject export
-# How about if no RCSUPDATE exists?
-# Well then you're going to lose. Or, if you insist, set
-# WASHTOOLRCSUPDATE to be a no-op
-# Warning: The next few lines are _extremely_ sensitive to spaces and tabs.
- ${WASHTOOL} object libafs
- case ${SYS_NAME} in \
- alpha_dux* ) \
- MKAFS_OSTYPE=DUX;; \
- hp_ux* ) \
- MKAFS_OSTYPE=HPUX;; \
- *linux*) \
- MKAFS_OSTYPE=LINUX;; \
- *fbsd*) \
- MKAFS_OSTYPE=FBSD;; \
- rs_aix* ) \
- MKAFS_OSTYPE=AIX;; \
- sgi_* ) \
- MKAFS_OSTYPE=IRIX;; \
- sun4x_5* ) \
- MKAFS_OSTYPE=SOLARIS;; \
- ppc_darwin* ) \
- MKAFS_OSTYPE=DARWIN;; \
- * ) \
- echo WARNING: No MakefileProto for sys ${SYS_NAME} ; \
- esac; \
- obj/config/config src/libafs/MakefileProto.$$MKAFS_OSTYPE obj/libafs/Makefile ${SYS_NAME}
-
-libuafs_setup: config minproject export
-# How about if no RCSUPDATE exists?
-# Well then you're going to lose. Or, if you insist, set
-# WASHTOOLRCSUPDATE to be a no-op
- ${WASHTOOL} object libuafs
- case ${SYS_NAME} in \
- hp_ux* ) \
- MKAFS_OSTYPE=HPUX;; \
- *linux*) \
- MKAFS_OSTYPE=LINUX;; \
- *fbsd*) \
- MKAFS_OSTYPE=FBSD;; \
- rs_aix* ) \
- MKAFS_OSTYPE=AIX;; \
- sun4x_5* ) \
- MKAFS_OSTYPE=SOLARIS;; \
- alpha_dux* ) \
- MKAFS_OSTYPE=DUX;; \
- sgi_6* ) \
- MKAFS_OSTYPE=IRIX;; \
- ppc_darwin* ) \
- MKAFS_OSTYPE=DARWIN;; \
- * ) \
- echo WARNING: No MakefileProto for sys ${SYS_NAME} ; \
- esac; \
- obj/config/config src/libuafs/MakefileProto.$$MKAFS_OSTYPE obj/libuafs/Makefile ${SYS_NAME}
+libafs_setup: config export
+ src/config/config src/libafs/MakefileProto.${MKAFS_OSTYPE} src/libafs/Makefile ${SYS_NAME}
-# "COMPILE_PART1=${COMPILE_PART1}" "COMPILE_PART2=${COMPILE_PART2}" SYS_NAME=${SYS_NAME} ;;
+libuafs_setup: config export
+ src/config/config src/libuafs/MakefileProto.${MKAFS_OSTYPE} src/libuafs/Makefile ${SYS_NAME}
TARGET=finale
install:
- $(MAKE) $(TARGET) "SYS_NAME=${SYS_NAME}" "WASHTOOL=${WASHTOOL}" \
+ $(MAKE) $(TARGET) "SYS_NAME=${SYS_NAME}" \
"COMPILE_PART1=${COMPILE_PART1}" \
"COMPILE_PART2=${COMPILE_PART2}" \
DESTDIR=`pwd`/${SYS_NAME}/dest/ \
+ TOP_SRCDIR=@TOP_SRCDIR@ \
SRCDIR=`pwd`/${SYS_NAME}/dest/ \
"DBG_DEFS=${DBG_DEFS}"
-# sgi: "NON_SHARED=-non_shared"
-#updatekdir:
-# ${WASHTOOL} rcsupdate ${KERNELDIR} libafs
-
kupdate: updatekdir libafs_setup libuafs_setup
blibafs:
$(MAKE) libuafs "WASHTOOL=${WASHTOOL}" "WASHTOOLFLAGS=-argument webinstall" SYS_NAME=${SYS_NAME} "CPUARCH=${CPUARCH}" "MPSP=${MPSP}" "DBG_DEFS=${DBG_DEFS}"
clean:
- ${WASHTOOL} every "cd obj/%s; $(MAKE) clean" -rootd obj
-
-checklist:
- ${WASHTOOL} every -command \
- 'cd rcs/%s; echo ; echo In %s:; if test x = "x`/bin/ls RCS/*,v`"; then exit 0; else rlog -I RCS/*,v; fi'
+ $(MAKE) clean2 "COMPILE_PART1=cd src; cd" "COMPILE_CLEAN=; $(MAKE) clean SYS_NAME=${SYS_NAME} DESTDIR=`pwd`/${SYS_NAME}/dest/ TOP_SRCDIR=@TOP_SRCDIR@ SRCDIR=`pwd`/${SYS_NAME}/dest/" SYS_NAME=${SYS_NAME}
+
+clean2:
+ ${COMPILE_PART1} config ${COMPILE_CLEAN}
+ ${COMPILE_PART1} pinstall ${COMPILE_CLEAN}
+ ${COMPILE_PART1} procmgmt ${COMPILE_CLEAN}
+ ${COMPILE_PART1} util ${COMPILE_CLEAN}
+ ${COMPILE_PART1} audit ${COMPILE_CLEAN}
+ ${COMPILE_PART1} comerr ${COMPILE_CLEAN}
+ ${COMPILE_PART1} cmd ${COMPILE_CLEAN}
+ ${COMPILE_PART1} lwp ${COMPILE_CLEAN}
+ ${COMPILE_PART1} rxgen ${COMPILE_CLEAN}
+ ${COMPILE_PART1} rx ${COMPILE_CLEAN}
+ ${COMPILE_PART1} rxstat ${COMPILE_CLEAN}
+ ${COMPILE_PART1} fsint ${COMPILE_CLEAN}
+ ${COMPILE_PART1} export ${COMPILE_CLEAN}
+ ${COMPILE_PART1} afs ${COMPILE_CLEAN}
+ ${COMPILE_PART1} des ${COMPILE_CLEAN}
+ ${COMPILE_PART1} sys ${COMPILE_CLEAN}
+ ${COMPILE_PART1} rxkad ${COMPILE_CLEAN}
+ ${COMPILE_PART1} auth ${COMPILE_CLEAN}
+ ${COMPILE_PART1} ubik ${COMPILE_CLEAN}
+ ${COMPILE_PART1} ptserver ${COMPILE_CLEAN}
+ ${COMPILE_PART1} kauth ${COMPILE_CLEAN}
+ ${COMPILE_PART1} dauth ${COMPILE_CLEAN}
+ ${COMPILE_PART1} libacl ${COMPILE_CLEAN}
+ ${COMPILE_PART1} dir ${COMPILE_CLEAN}
+ ${COMPILE_PART1} vol ${COMPILE_CLEAN}
+ ${COMPILE_PART1} vlserver ${COMPILE_CLEAN}
+ ${COMPILE_PART1} viced ${COMPILE_CLEAN}
+ ${COMPILE_PART1} viced ${COMPILE_CLEAN}
+ ${COMPILE_PART1} tviced ${COMPILE_CLEAN}
+ ${COMPILE_PART1} volser ${COMPILE_CLEAN}
+ ${COMPILE_PART1} venus ${COMPILE_CLEAN}
+ ${COMPILE_PART1} venus/test ${COMPILE_CLEAN}
+ ${COMPILE_PART1} afsd ${COMPILE_CLEAN}
+ ${COMPILE_PART1} null ${COMPILE_CLEAN}
+ ${COMPILE_PART1} gtx ${COMPILE_CLEAN}
+ ${COMPILE_PART1} fsprobe ${COMPILE_CLEAN}
+ ${COMPILE_PART1} scout ${COMPILE_CLEAN}
+ ${COMPILE_PART1} uss ${COMPILE_CLEAN}
+ ${COMPILE_PART1} bozo ${COMPILE_CLEAN}
+ ${COMPILE_PART1} vfsck ${COMPILE_CLEAN}
+ ${COMPILE_PART1} sgistuff ${COMPILE_CLEAN}
+ ${COMPILE_PART1} tsm41 ${COMPILE_CLEAN}
+ ${COMPILE_PART1} sia ${COMPILE_CLEAN}
+ ${COMPILE_PART1} login ${COMPILE_CLEAN}
+ ${COMPILE_PART1} pam ${COMPILE_CLEAN}
+ ${COMPILE_PART1} afsweb ${COMPILE_CLEAN}
+ ${COMPILE_PART1} update ${COMPILE_CLEAN}
+ ${COMPILE_PART1} log ${COMPILE_CLEAN}
+ ${COMPILE_PART1} bu_utils ${COMPILE_CLEAN}
+ ${COMPILE_PART1} usd ${COMPILE_CLEAN}
+ ${COMPILE_PART1} bubasics ${COMPILE_CLEAN}
+ ${COMPILE_PART1} butm ${COMPILE_CLEAN}
+ ${COMPILE_PART1} butc ${COMPILE_CLEAN}
+ ${COMPILE_PART1} tbutc ${COMPILE_CLEAN}
+ ${COMPILE_PART1} budb ${COMPILE_CLEAN}
+ ${COMPILE_PART1} bucoord ${COMPILE_CLEAN}
+ ${COMPILE_PART1} xstat ${COMPILE_CLEAN}
+ ${COMPILE_PART1} afsmonitor ${COMPILE_CLEAN}
+ ${COMPILE_PART1} libafsrpc ${COMPILE_CLEAN}
+ ${COMPILE_PART1} libafsauthent ${COMPILE_CLEAN}
+ ${COMPILE_PART1} libadmin ${COMPILE_CLEAN}
+ ${COMPILE_PART1} libadmin/adminutil ${COMPILE_CLEAN}
+ ${COMPILE_PART1} libadmin/client ${COMPILE_CLEAN}
+ ${COMPILE_PART1} libadmin/vos ${COMPILE_CLEAN}
+ ${COMPILE_PART1} libadmin/kas ${COMPILE_CLEAN}
+ ${COMPILE_PART1} libadmin/pts ${COMPILE_CLEAN}
+ ${COMPILE_PART1} libadmin/bos ${COMPILE_CLEAN}
+ ${COMPILE_PART1} libadmin/cfg ${COMPILE_CLEAN}
+ ${COMPILE_PART1} libadmin/test ${COMPILE_CLEAN}
+ ${COMPILE_PART1} libadmin/samples ${COMPILE_CLEAN}
+ ${COMPILE_PART1} finale ${COMPILE_CLEAN}
+ ${COMPILE_PART1} mpp ${COMPILE_CLEAN}
+ ${COMPILE_PART1} package ${COMPILE_CLEAN}
+ ${COMPILE_PART1} ntp ${COMPILE_CLEAN}
+ ${COMPILE_PART1} ftpd43+ ${COMPILE_CLEAN}
+ ${COMPILE_PART1} inetd ${COMPILE_CLEAN}
+ ${COMPILE_PART1} rsh ${COMPILE_CLEAN}
+ ${COMPILE_PART1} rlogind ${COMPILE_CLEAN}
+ ${COMPILE_PART1} rcp ${COMPILE_CLEAN}
+ ${COMPILE_PART1} libafs ${COMPILE_CLEAN}
+ ${COMPILE_PART1} libuafs ${COMPILE_CLEAN}
links:
echo "Remove the obj directory"
cd src; \
for file in `find [!NW]* -type f -print` ; do \
/bin/ln -s `pwd`/$${file} $${here}/obj/$${file} ; \
- done; \
- /bin/ln -s $${here}/obj/afsconfig.h.in $${here}/obj/config/afsconfig.h ;
-
-# config.h link will eventually be replaced with generating the file
-# directly from config.h.in via configure run. I'm linking instead of
-# copying to ease development for now
+ done;
#
# Below targets are all deprecated, insecure, or obsolte,
*) echo skipping deprecated target: ntp ;; \
esac
-sgistuff: project rlogind
- @case ${WITH_OBSOLETE} in \
- YES) case ${SYS_NAME} in \
- sgi_* ) ${COMPILE_PART1} sgistuff ${COMPILE_PART2} ;; \
- * ) echo skipping sgistuff for ${SYS_NAME} ;; \
- esac ;; \
- *) echo skipping deprecated target: sgistuff ;; \
- esac
-
ftpd43+: project kauth rxkad
@case ${WITH_INSECURE} in \
YES) case ${SYS_NAME} in \
--- /dev/null
+@BOTTOM@
+
+#define RCSID(msg) \
+static /**/const char *const rcsid[] = { (char *)rcsid, "\100(#)" msg }
+
+#undef HAVE_CONNECT
+#undef HAVE_GETHOSTBYNAME
+#undef HAVE_RES_SEARCH
+#undef HAVE_SOCKET
+
+#if ENDIANESS_IN_SYS_PARAM_H
+# include <sys/types.h>
+# include <sys/param.h>
+# if BYTE_ORDER == BIG_ENDIAN
+# define WORDS_BIGENDIAN 1
+# endif
+#endif
+
+#undef AFS_AFSDB_ENV
+#undef AFS_NAMEI_ENV
+#undef BOS_RESTRICTED_MODE
--- /dev/null
+dnl aclocal.m4 generated automatically by aclocal 1.4
+
+dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+dnl PARTICULAR PURPOSE.
+
+# Do all the work for Automake. This macro actually does too much --
+# some checks are only needed if your package does certain things.
+# But this isn't really a big deal.
+
+# serial 1
+
+dnl Usage:
+dnl AM_INIT_AUTOMAKE(package,version, [no-define])
+
+AC_DEFUN(AM_INIT_AUTOMAKE,
+[AC_REQUIRE([AC_PROG_INSTALL])
+PACKAGE=[$1]
+AC_SUBST(PACKAGE)
+VERSION=[$2]
+AC_SUBST(VERSION)
+dnl test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+fi
+ifelse([$3],,
+AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
+AC_REQUIRE([AM_SANITY_CHECK])
+AC_REQUIRE([AC_ARG_PROGRAM])
+dnl FIXME This is truly gross.
+missing_dir=`cd $ac_aux_dir && pwd`
+AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
+AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
+AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
+AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
+AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
+AC_REQUIRE([AC_PROG_MAKE_SET])])
+
+#
+# Check to make sure that the build environment is sane.
+#
+
+AC_DEFUN(AM_SANITY_CHECK,
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftestfile
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+ if test "[$]*" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftestfile`
+ fi
+ if test "[$]*" != "X $srcdir/configure conftestfile" \
+ && test "[$]*" != "X conftestfile $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+alias in your environment])
+ fi
+
+ test "[$]2" = conftestfile
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+rm -f conftest*
+AC_MSG_RESULT(yes)])
+
+dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
+dnl The program must properly implement --version.
+AC_DEFUN(AM_MISSING_PROG,
+[AC_MSG_CHECKING(for working $2)
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if ($2 --version) < /dev/null > /dev/null 2>&1; then
+ $1=$2
+ AC_MSG_RESULT(found)
+else
+ $1="$3/missing $2"
+ AC_MSG_RESULT(missing)
+fi
+AC_SUBST($1)])
+
+
+dnl AM_PROG_LEX
+dnl Look for flex, lex or missing, then run AC_PROG_LEX and AC_DECL_YYTEXT
+AC_DEFUN(AM_PROG_LEX,
+[missing_dir=ifelse([$1],,`cd $ac_aux_dir && pwd`,$1)
+AC_CHECK_PROGS(LEX, flex lex, "$missing_dir/missing flex")
+AC_PROG_LEX
+AC_DECL_YYTEXT])
+
+dnl
+dnl $Id$
+dnl
+
+dnl check if this computer is little or big-endian
+dnl if we can figure it out at compile-time then don't define the cpp symbol
+dnl otherwise test for it and define it. also allow options for overriding
+dnl it when cross-compiling
+
+AC_DEFUN(OPENAFS_CHECK_BIGENDIAN, [
+AC_ARG_ENABLE(bigendian,
+[ --enable-bigendian the target is big endian],
+openafs_cv_c_bigendian=yes)
+AC_ARG_ENABLE(littleendian,
+[ --enable-littleendian the target is little endian],
+openafs_cv_c_bigendian=no)
+AC_CACHE_CHECK(whether byte order is known at compile time,
+openafs_cv_c_bigendian_compile,
+[AC_TRY_COMPILE([
+#include <sys/types.h>
+#include <sys/param.h>],[
+#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
+ bogus endian macros
+#endif], openafs_cv_c_bigendian_compile=yes, openafs_cv_c_bigendian_compile=no)])
+AC_CACHE_CHECK(whether byte ordering is bigendian, openafs_cv_c_bigendian,[
+ if test "$openafs_cv_c_bigendian_compile" = "yes"; then
+ AC_TRY_COMPILE([
+#include <sys/types.h>
+#include <sys/param.h>],[
+#if BYTE_ORDER != BIG_ENDIAN
+ not big endian
+#endif], openafs_cv_c_bigendian=yes, openafs_cv_c_bigendian=no)
+ else
+ AC_TRY_RUN([main () {
+ /* Are we little or big endian? From Harbison&Steele. */
+ union
+ {
+ long l;
+ char c[sizeof (long)];
+ } u;
+ u.l = 1;
+ exit (u.c[sizeof (long) - 1] == 1);
+ }], openafs_cv_c_bigendian=no, openafs_cv_c_bigendian=yes,
+ AC_MSG_ERROR([specify either --enable-bigendian or --enable-littleendian]))
+ fi
+])
+if test "$openafs_cv_c_bigendian" = "yes"; then
+ AC_DEFINE(WORDS_BIGENDIAN, 1, [define if target is big endian])dnl
+fi
+if test "$openafs_cv_c_bigendian_compile" = "yes"; then
+ AC_DEFINE(ENDIANESS_IN_SYS_PARAM_H, 1, [define if sys/param.h defines the endiness])dnl
+fi
+])
+
+AC_DEFUN(LINUX_FS_STRUCT_INODE_HAS_I_BYTES, [
+AC_MSG_CHECKING(for i_bytes in struct inode)
+save_CPPFLAGS="$CPPFLAGS"
+CPPFLAGS="-I${LINUX_KERNEL_PATH}/include -D__KERNEL__ $CPPFLAGS"
+AC_CACHE_VAL(ac_cv_linux_fs_struct_inode_has_i_bytes,
+[
+AC_TRY_COMPILE(
+[#include <linux/fs.h>],
+[struct inode _inode;
+printf("%d\n", _inode.i_bytes);],
+ac_cv_linux_fs_struct_inode_has_i_bytes=yes,
+ac_cv_linux_fs_struct_inode_has_i_bytes=no)])
+AC_MSG_RESULT($ac_cv_linux_fs_struct_inode_has_i_bytes)
+CPPFLAGS="$save_CPPFLAGS"])
+
+
+AC_DEFUN(LINUX_INODE_SETATTR_RETURN_TYPE,[
+AC_MSG_CHECKING(for inode_setattr return type)
+save_CPPFLAGS="$CPPFLAGS"
+CPPFLAGS="-I${LINUX_KERNEL_PATH}/include -D__KERNEL__ $CPPFLAGS"
+AC_CACHE_VAL(ac_cv_linux_func_inode_setattr_returns_int,
+[
+AC_TRY_COMPILE(
+[#include <linux/fs.h>],
+[struct inode _inode;
+struct iattr _iattr;
+int i;
+i = inode_setattr(&_inode, &_iattr);],
+ac_cv_linux_func_inode_setattr_returns_int=yes,
+ac_cv_linux_func_inode_setattr_returns_int=no)])
+AC_MSG_RESULT($ac_cv_linux_func_inode_setattr_returns_int)
+CPPFLAGS="$save_CPPFLAGS"])
+
--- /dev/null
+#! /bin/sh
+# Attempt to guess a canonical system name.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
+# Free Software Foundation, Inc.
+
+version='2000-09-05'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Written by Per Bothner <bothner@cygnus.com>.
+# Please send patches to <config-patches@gnu.org>.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub. If it succeeds, it prints the system name on stdout, and
+# exits with 0. Otherwise, it exits with 1.
+#
+# The plan is that this can be called by configure scripts if you
+# don't specify an explicit system type (host/target name).
+#
+# Only a few systems have been added to this list; please add others
+# (but try to keep the structure clean).
+#
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of this system.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -V, --version print version number, then exit"
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case "$1" in
+ --version | --vers* | -V )
+ echo "$version" ; exit 0 ;;
+ --help | --h* | -h )
+ echo "$usage"; exit 0 ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ exec >&2
+ echo "$me: invalid option $1"
+ echo "$help"
+ exit 1 ;;
+ * )
+ break ;;
+ esac
+done
+
+if test $# != 0; then
+ echo "$me: too many arguments$help" >&2
+ exit 1
+fi
+
+# Use $HOST_CC if defined. $CC may point to a cross-compiler
+if test x"$CC_FOR_BUILD" = x; then
+ if test x"$HOST_CC" != x; then
+ CC_FOR_BUILD="$HOST_CC"
+ else
+ if test x"$CC" != x; then
+ CC_FOR_BUILD="$CC"
+ else
+ CC_FOR_BUILD=cc
+ fi
+ fi
+fi
+
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 8/24/94.)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+ PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+dummy=dummy-$$
+trap 'rm -f $dummy.c $dummy.o $dummy; exit 1' 1 2 15
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+ *:NetBSD:*:*)
+ # Netbsd (nbsd) targets should (where applicable) match one or
+ # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+ # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
+ # switched to ELF, *-*-netbsd* would select the old
+ # object file format. This provides both forward
+ # compatibility and a consistent mechanism for selecting the
+ # object file format.
+ # Determine the machine/vendor (is the vendor relevant).
+ case "${UNAME_MACHINE}" in
+ amiga) machine=m68k-unknown ;;
+ arm32) machine=arm-unknown ;;
+ atari*) machine=m68k-atari ;;
+ sun3*) machine=m68k-sun ;;
+ mac68k) machine=m68k-apple ;;
+ macppc) machine=powerpc-apple ;;
+ hp3[0-9][05]) machine=m68k-hp ;;
+ ibmrt|romp-ibm) machine=romp-ibm ;;
+ *) machine=${UNAME_MACHINE}-unknown ;;
+ esac
+ # The Operating System including object format.
+ if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep __ELF__ >/dev/null
+ then
+ # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+ # Return netbsd for either. FIX?
+ os=netbsd
+ else
+ os=netbsdelf
+ fi
+ # The OS release
+ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+ # contains redundant information, the shorter form:
+ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+ echo "${machine}-${os}${release}"
+ exit 0 ;;
+ alpha:OSF1:*:*)
+ if test $UNAME_RELEASE = "V4.0"; then
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+ fi
+ # A Vn.n version is a released version.
+ # A Tn.n version is a released field test version.
+ # A Xn.n version is an unreleased experimental baselevel.
+ # 1.2 uses "1.2" for uname -r.
+ cat <<EOF >$dummy.s
+ .data
+\$Lformat:
+ .byte 37,100,45,37,120,10,0 # "%d-%x\n"
+
+ .text
+ .globl main
+ .align 4
+ .ent main
+main:
+ .frame \$30,16,\$26,0
+ ldgp \$29,0(\$27)
+ .prologue 1
+ .long 0x47e03d80 # implver \$0
+ lda \$2,-1
+ .long 0x47e20c21 # amask \$2,\$1
+ lda \$16,\$Lformat
+ mov \$0,\$17
+ not \$1,\$18
+ jsr \$26,printf
+ ldgp \$29,0(\$26)
+ mov 0,\$16
+ jsr \$26,exit
+ .end main
+EOF
+ $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
+ if test "$?" = 0 ; then
+ case `./$dummy` in
+ 0-0)
+ UNAME_MACHINE="alpha"
+ ;;
+ 1-0)
+ UNAME_MACHINE="alphaev5"
+ ;;
+ 1-1)
+ UNAME_MACHINE="alphaev56"
+ ;;
+ 1-101)
+ UNAME_MACHINE="alphapca56"
+ ;;
+ 2-303)
+ UNAME_MACHINE="alphaev6"
+ ;;
+ 2-307)
+ UNAME_MACHINE="alphaev67"
+ ;;
+ esac
+ fi
+ rm -f $dummy.s $dummy
+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ exit 0 ;;
+ Alpha\ *:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # Should we change UNAME_MACHINE based on the output of uname instead
+ # of the specific Alpha model?
+ echo alpha-pc-interix
+ exit 0 ;;
+ 21064:Windows_NT:50:3)
+ echo alpha-dec-winnt3.5
+ exit 0 ;;
+ Amiga*:UNIX_System_V:4.0:*)
+ echo m68k-unknown-sysv4
+ exit 0;;
+ amiga:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ *:[Aa]miga[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-amigaos
+ exit 0 ;;
+ arc64:OpenBSD:*:*)
+ echo mips64el-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ arc:OpenBSD:*:*)
+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ hkmips:OpenBSD:*:*)
+ echo mips-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ pmax:OpenBSD:*:*)
+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ sgi:OpenBSD:*:*)
+ echo mips-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ wgrisc:OpenBSD:*:*)
+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ *:OS/390:*:*)
+ echo i370-ibm-openedition
+ exit 0 ;;
+ arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+ echo arm-acorn-riscix${UNAME_RELEASE}
+ exit 0;;
+ SR2?01:HI-UX/MPP:*:*)
+ echo hppa1.1-hitachi-hiuxmpp
+ exit 0;;
+ Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+ # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+ if test "`(/bin/universe) 2>/dev/null`" = att ; then
+ echo pyramid-pyramid-sysv3
+ else
+ echo pyramid-pyramid-bsd
+ fi
+ exit 0 ;;
+ NILE*:*:*:dcosx)
+ echo pyramid-pyramid-svr4
+ exit 0 ;;
+ sun4H:SunOS:5.*:*)
+ echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+ echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ i86pc:SunOS:5.*:*)
+ echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ sun4*:SunOS:6*:*)
+ # According to config.sub, this is the proper way to canonicalize
+ # SunOS6. Hard to guess exactly what SunOS6 will be like, but
+ # it's likely to be more like Solaris than SunOS4.
+ echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ sun4*:SunOS:*:*)
+ case "`/usr/bin/arch -k`" in
+ Series*|S4*)
+ UNAME_RELEASE=`uname -v`
+ ;;
+ esac
+ # Japanese Language versions have a version number like `4.1.3-JL'.
+ echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+ exit 0 ;;
+ sun3*:SunOS:*:*)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ exit 0 ;;
+ sun*:*:4.2BSD:*)
+ UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+ test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+ case "`/bin/arch`" in
+ sun3)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ ;;
+ sun4)
+ echo sparc-sun-sunos${UNAME_RELEASE}
+ ;;
+ esac
+ exit 0 ;;
+ aushp:SunOS:*:*)
+ echo sparc-auspex-sunos${UNAME_RELEASE}
+ exit 0 ;;
+ atari*:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ # The situation for MiNT is a little confusing. The machine name
+ # can be virtually everything (everything which is not
+ # "atarist" or "atariste" at least should have a processor
+ # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
+ # to the lowercase version "mint" (or "freemint"). Finally
+ # the system name "TOS" denotes a system which is actually not
+ # MiNT. But MiNT is downward compatible to TOS, so this should
+ # be no problem.
+ atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit 0 ;;
+ atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit 0 ;;
+ *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit 0 ;;
+ milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+ echo m68k-milan-mint${UNAME_RELEASE}
+ exit 0 ;;
+ hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+ echo m68k-hades-mint${UNAME_RELEASE}
+ exit 0 ;;
+ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+ echo m68k-unknown-mint${UNAME_RELEASE}
+ exit 0 ;;
+ sun3*:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mac68k:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mvme68k:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mvme88k:OpenBSD:*:*)
+ echo m88k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ powerpc:machten:*:*)
+ echo powerpc-apple-machten${UNAME_RELEASE}
+ exit 0 ;;
+ RISC*:Mach:*:*)
+ echo mips-dec-mach_bsd4.3
+ exit 0 ;;
+ RISC*:ULTRIX:*:*)
+ echo mips-dec-ultrix${UNAME_RELEASE}
+ exit 0 ;;
+ VAX*:ULTRIX*:*:*)
+ echo vax-dec-ultrix${UNAME_RELEASE}
+ exit 0 ;;
+ 2020:CLIX:*:* | 2430:CLIX:*:*)
+ echo clipper-intergraph-clix${UNAME_RELEASE}
+ exit 0 ;;
+ mips:*:*:UMIPS | mips:*:*:RISCos)
+ sed 's/^ //' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h> /* for printf() prototype */
+ int main (int argc, char *argv[]) {
+#else
+ int main (argc, argv) int argc; char *argv[]; {
+#endif
+ #if defined (host_mips) && defined (MIPSEB)
+ #if defined (SYSTYPE_SYSV)
+ printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_SVR4)
+ printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+ printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+ #endif
+ #endif
+ exit (-1);
+ }
+EOF
+ $CC_FOR_BUILD $dummy.c -o $dummy \
+ && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
+ && rm $dummy.c $dummy && exit 0
+ rm -f $dummy.c $dummy
+ echo mips-mips-riscos${UNAME_RELEASE}
+ exit 0 ;;
+ Night_Hawk:Power_UNIX:*:*)
+ echo powerpc-harris-powerunix
+ exit 0 ;;
+ m88k:CX/UX:7*:*)
+ echo m88k-harris-cxux7
+ exit 0 ;;
+ m88k:*:4*:R4*)
+ echo m88k-motorola-sysv4
+ exit 0 ;;
+ m88k:*:3*:R3*)
+ echo m88k-motorola-sysv3
+ exit 0 ;;
+ AViiON:dgux:*:*)
+ # DG/UX returns AViiON for all architectures
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+ if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110]
+ then
+ if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+ [ ${TARGET_BINARY_INTERFACE}x = x ]
+ then
+ echo m88k-dg-dgux${UNAME_RELEASE}
+ else
+ echo m88k-dg-dguxbcs${UNAME_RELEASE}
+ fi
+ else
+ echo i586-dg-dgux${UNAME_RELEASE}
+ fi
+ exit 0 ;;
+ M88*:DolphinOS:*:*) # DolphinOS (SVR3)
+ echo m88k-dolphin-sysv3
+ exit 0 ;;
+ M88*:*:R3*:*)
+ # Delta 88k system running SVR3
+ echo m88k-motorola-sysv3
+ exit 0 ;;
+ XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+ echo m88k-tektronix-sysv3
+ exit 0 ;;
+ Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+ echo m68k-tektronix-bsd
+ exit 0 ;;
+ *:IRIX*:*:*)
+ echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+ exit 0 ;;
+ ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
+ exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX '
+ i?86:AIX:*:*)
+ echo i386-ibm-aix
+ exit 0 ;;
+ *:AIX:2:3)
+ if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+ sed 's/^ //' << EOF >$dummy.c
+ #include <sys/systemcfg.h>
+
+ main()
+ {
+ if (!__power_pc())
+ exit(1);
+ puts("powerpc-ibm-aix3.2.5");
+ exit(0);
+ }
+EOF
+ $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
+ rm -f $dummy.c $dummy
+ echo rs6000-ibm-aix3.2.5
+ elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+ echo rs6000-ibm-aix3.2.4
+ else
+ echo rs6000-ibm-aix3.2
+ fi
+ exit 0 ;;
+ *:AIX:*:4)
+ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'`
+ if /usr/sbin/lsattr -EHl ${IBM_CPU_ID} | grep POWER >/dev/null 2>&1; then
+ IBM_ARCH=rs6000
+ else
+ IBM_ARCH=powerpc
+ fi
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV=4.${UNAME_RELEASE}
+ fi
+ echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+ exit 0 ;;
+ *:AIX:*:*)
+ echo rs6000-ibm-aix
+ exit 0 ;;
+ ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+ echo romp-ibm-bsd4.4
+ exit 0 ;;
+ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
+ echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
+ exit 0 ;; # report: romp-ibm BSD 4.3
+ *:BOSX:*:*)
+ echo rs6000-bull-bosx
+ exit 0 ;;
+ DPX/2?00:B.O.S.:*:*)
+ echo m68k-bull-sysv3
+ exit 0 ;;
+ 9000/[34]??:4.3bsd:1.*:*)
+ echo m68k-hp-bsd
+ exit 0 ;;
+ hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+ echo m68k-hp-bsd4.4
+ exit 0 ;;
+ 9000/[34678]??:HP-UX:*:*)
+ case "${UNAME_MACHINE}" in
+ 9000/31? ) HP_ARCH=m68000 ;;
+ 9000/[34]?? ) HP_ARCH=m68k ;;
+ 9000/[678][0-9][0-9])
+ sed 's/^ //' << EOF >$dummy.c
+
+ #define _HPUX_SOURCE
+ #include <stdlib.h>
+ #include <unistd.h>
+
+ int main ()
+ {
+ #if defined(_SC_KERNEL_BITS)
+ long bits = sysconf(_SC_KERNEL_BITS);
+ #endif
+ long cpu = sysconf (_SC_CPU_VERSION);
+
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+ case CPU_PA_RISC2_0:
+ #if defined(_SC_KERNEL_BITS)
+ switch (bits)
+ {
+ case 64: puts ("hppa2.0w"); break;
+ case 32: puts ("hppa2.0n"); break;
+ default: puts ("hppa2.0"); break;
+ } break;
+ #else /* !defined(_SC_KERNEL_BITS) */
+ puts ("hppa2.0"); break;
+ #endif
+ default: puts ("hppa1.0"); break;
+ }
+ exit (0);
+ }
+EOF
+ (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
+ rm -f $dummy.c $dummy
+ esac
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+ exit 0 ;;
+ 3050*:HI-UX:*:*)
+ sed 's/^ //' << EOF >$dummy.c
+ #include <unistd.h>
+ int
+ main ()
+ {
+ long cpu = sysconf (_SC_CPU_VERSION);
+ /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+ true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
+ results, however. */
+ if (CPU_IS_PA_RISC (cpu))
+ {
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+ default: puts ("hppa-hitachi-hiuxwe2"); break;
+ }
+ }
+ else if (CPU_IS_HP_MC68K (cpu))
+ puts ("m68k-hitachi-hiuxwe2");
+ else puts ("unknown-hitachi-hiuxwe2");
+ exit (0);
+ }
+EOF
+ $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
+ rm -f $dummy.c $dummy
+ echo unknown-hitachi-hiuxwe2
+ exit 0 ;;
+ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+ echo hppa1.1-hp-bsd
+ exit 0 ;;
+ 9000/8??:4.3bsd:*:*)
+ echo hppa1.0-hp-bsd
+ exit 0 ;;
+ *9??*:MPE/iX:*:*)
+ echo hppa1.0-hp-mpeix
+ exit 0 ;;
+ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+ echo hppa1.1-hp-osf
+ exit 0 ;;
+ hp8??:OSF1:*:*)
+ echo hppa1.0-hp-osf
+ exit 0 ;;
+ i?86:OSF1:*:*)
+ if [ -x /usr/sbin/sysversion ] ; then
+ echo ${UNAME_MACHINE}-unknown-osf1mk
+ else
+ echo ${UNAME_MACHINE}-unknown-osf1
+ fi
+ exit 0 ;;
+ parisc*:Lites*:*:*)
+ echo hppa1.1-hp-lites
+ exit 0 ;;
+ hppa*:OpenBSD:*:*)
+ echo hppa-unknown-openbsd
+ exit 0 ;;
+ C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+ echo c1-convex-bsd
+ exit 0 ;;
+ C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit 0 ;;
+ C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+ echo c34-convex-bsd
+ exit 0 ;;
+ C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+ echo c38-convex-bsd
+ exit 0 ;;
+ C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+ echo c4-convex-bsd
+ exit 0 ;;
+ CRAY*X-MP:*:*:*)
+ echo xmp-cray-unicos
+ exit 0 ;;
+ CRAY*Y-MP:*:*:*)
+ echo ymp-cray-unicos${UNAME_RELEASE}
+ exit 0 ;;
+ CRAY*[A-Z]90:*:*:*)
+ echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
+ exit 0 ;;
+ CRAY*TS:*:*:*)
+ echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ CRAY*T3E:*:*:*)
+ echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ CRAY*SV1:*:*:*)
+ echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ CRAY-2:*:*:*)
+ echo cray2-cray-unicos
+ exit 0 ;;
+ F300:UNIX_System_V:*:*)
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+ echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit 0 ;;
+ F301:UNIX_System_V:*:*)
+ echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'`
+ exit 0 ;;
+ hp300:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ i?86:BSD/386:*:* | i?86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+ echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+ exit 0 ;;
+ sparc*:BSD/OS:*:*)
+ echo sparc-unknown-bsdi${UNAME_RELEASE}
+ exit 0 ;;
+ *:BSD/OS:*:*)
+ echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+ exit 0 ;;
+ *:FreeBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+ exit 0 ;;
+ *:OpenBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ exit 0 ;;
+ i*:CYGWIN*:*)
+ echo ${UNAME_MACHINE}-pc-cygwin
+ exit 0 ;;
+ i*:MINGW*:*)
+ echo ${UNAME_MACHINE}-pc-mingw32
+ exit 0 ;;
+ i*:PW*:*)
+ echo ${UNAME_MACHINE}-pc-pw32
+ exit 0 ;;
+ i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+ # UNAME_MACHINE based on the output of uname instead of i386?
+ echo i386-pc-interix
+ exit 0 ;;
+ i*:UWIN*:*)
+ echo ${UNAME_MACHINE}-pc-uwin
+ exit 0 ;;
+ p*:CYGWIN*:*)
+ echo powerpcle-unknown-cygwin
+ exit 0 ;;
+ prep*:SunOS:5.*:*)
+ echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ *:GNU:*:*)
+ echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+ exit 0 ;;
+ i*86:Minix:*:*)
+ echo ${UNAME_MACHINE}-pc-minix
+ exit 0 ;;
+ *:Linux:*:*)
+
+ # The BFD linker knows what the default object file format is, so
+ # first see if it will tell us. cd to the root directory to prevent
+ # problems with other programs or directories called `ld' in the path.
+ ld_help_string=`cd /; ld --help 2>&1`
+ ld_supported_emulations=`echo $ld_help_string \
+ | sed -ne '/supported emulations:/!d
+ s/[ ][ ]*/ /g
+ s/.*supported emulations: *//
+ s/ .*//
+ p'`
+ case "$ld_supported_emulations" in
+ *ia64)
+ echo "${UNAME_MACHINE}-unknown-linux"
+ exit 0
+ ;;
+ i?86linux)
+ echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+ exit 0
+ ;;
+ elf_i?86)
+ TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
+ ;;
+ i?86coff)
+ echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+ exit 0
+ ;;
+ sparclinux)
+ echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+ exit 0
+ ;;
+ armlinux)
+ echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+ exit 0
+ ;;
+ elf32arm*)
+ echo "${UNAME_MACHINE}-unknown-linux-gnuoldld"
+ exit 0
+ ;;
+ armelf_linux*)
+ echo "${UNAME_MACHINE}-unknown-linux-gnu"
+ exit 0
+ ;;
+ m68klinux)
+ echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+ exit 0
+ ;;
+ elf32ppc | elf32ppclinux)
+ # Determine Lib Version
+ cat >$dummy.c <<EOF
+#include <features.h>
+#if defined(__GLIBC__)
+extern char __libc_version[];
+extern char __libc_release[];
+#endif
+main(argc, argv)
+ int argc;
+ char *argv[];
+{
+#if defined(__GLIBC__)
+ printf("%s %s\n", __libc_version, __libc_release);
+#else
+ printf("unkown\n");
+#endif
+ return 0;
+}
+EOF
+ LIBC=""
+ $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null
+ if test "$?" = 0 ; then
+ ./$dummy | grep 1\.99 > /dev/null
+ if test "$?" = 0 ; then
+ LIBC="libc1"
+ fi
+ fi
+ rm -f $dummy.c $dummy
+ echo powerpc-unknown-linux-gnu${LIBC}
+ exit 0
+ ;;
+ shelf_linux)
+ echo "${UNAME_MACHINE}-unknown-linux-gnu"
+ exit 0
+ ;;
+ esac
+
+ if test "${UNAME_MACHINE}" = "alpha" ; then
+ cat <<EOF >$dummy.s
+ .data
+ \$Lformat:
+ .byte 37,100,45,37,120,10,0 # "%d-%x\n"
+
+ .text
+ .globl main
+ .align 4
+ .ent main
+ main:
+ .frame \$30,16,\$26,0
+ ldgp \$29,0(\$27)
+ .prologue 1
+ .long 0x47e03d80 # implver \$0
+ lda \$2,-1
+ .long 0x47e20c21 # amask \$2,\$1
+ lda \$16,\$Lformat
+ mov \$0,\$17
+ not \$1,\$18
+ jsr \$26,printf
+ ldgp \$29,0(\$26)
+ mov 0,\$16
+ jsr \$26,exit
+ .end main
+EOF
+ LIBC=""
+ $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
+ if test "$?" = 0 ; then
+ case `./$dummy` in
+ 0-0)
+ UNAME_MACHINE="alpha"
+ ;;
+ 1-0)
+ UNAME_MACHINE="alphaev5"
+ ;;
+ 1-1)
+ UNAME_MACHINE="alphaev56"
+ ;;
+ 1-101)
+ UNAME_MACHINE="alphapca56"
+ ;;
+ 2-303)
+ UNAME_MACHINE="alphaev6"
+ ;;
+ 2-307)
+ UNAME_MACHINE="alphaev67"
+ ;;
+ esac
+
+ objdump --private-headers $dummy | \
+ grep ld.so.1 > /dev/null
+ if test "$?" = 0 ; then
+ LIBC="libc1"
+ fi
+ fi
+ rm -f $dummy.s $dummy
+ echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0
+ elif test "${UNAME_MACHINE}" = "mips" ; then
+ cat >$dummy.c <<EOF
+#ifdef __cplusplus
+#include <stdio.h> /* for printf() prototype */
+ int main (int argc, char *argv[]) {
+#else
+ int main (argc, argv) int argc; char *argv[]; {
+#endif
+#ifdef __MIPSEB__
+ printf ("%s-unknown-linux-gnu\n", argv[1]);
+#endif
+#ifdef __MIPSEL__
+ printf ("%sel-unknown-linux-gnu\n", argv[1]);
+#endif
+ return 0;
+}
+EOF
+ $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
+ rm -f $dummy.c $dummy
+ elif test "${UNAME_MACHINE}" = "s390"; then
+ echo s390-ibm-linux && exit 0
+ elif test "${UNAME_MACHINE}" = "x86_64"; then
+ echo x86_64-unknown-linux-gnu && exit 0
+ else
+ # Either a pre-BFD a.out linker (linux-gnuoldld)
+ # or one that does not give us useful --help.
+ # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout.
+ # If ld does not provide *any* "supported emulations:"
+ # that means it is gnuoldld.
+ echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations:"
+ test $? != 0 && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0
+
+ case "${UNAME_MACHINE}" in
+ i?86)
+ VENDOR=pc;
+ ;;
+ *)
+ VENDOR=unknown;
+ ;;
+ esac
+ # Determine whether the default compiler is a.out or elf
+ cat >$dummy.c <<EOF
+#include <features.h>
+#ifdef __cplusplus
+#include <stdio.h> /* for printf() prototype */
+ int main (int argc, char *argv[]) {
+#else
+ int main (argc, argv) int argc; char *argv[]; {
+#endif
+#ifdef __ELF__
+# ifdef __GLIBC__
+# if __GLIBC__ >= 2
+ printf ("%s-${VENDOR}-linux-gnu\n", argv[1]);
+# else
+ printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+# endif
+# else
+ printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+# endif
+#else
+ printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]);
+#endif
+ return 0;
+}
+EOF
+ $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
+ rm -f $dummy.c $dummy
+ test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
+ fi ;;
+# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions
+# are messed up and put the nodename in both sysname and nodename.
+ i?86:DYNIX/ptx:4*:*)
+ echo i386-sequent-sysv4
+ exit 0 ;;
+ i?86:UNIX_SV:4.2MP:2.*)
+ # Unixware is an offshoot of SVR4, but it has its own version
+ # number series starting with 2...
+ # I am not positive that other SVR4 systems won't match this,
+ # I just have to hope. -- rms.
+ # Use sysv4.2uw... so that sysv4* matches it.
+ echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+ exit 0 ;;
+ i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*)
+ UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+ if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+ echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+ else
+ echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+ fi
+ exit 0 ;;
+ i?86:*:5:7*)
+ # Fixed at (any) Pentium or better
+ UNAME_MACHINE=i586
+ if [ ${UNAME_SYSTEM} = "UnixWare" ] ; then
+ echo ${UNAME_MACHINE}-sco-sysv${UNAME_RELEASE}uw${UNAME_VERSION}
+ else
+ echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
+ fi
+ exit 0 ;;
+ i?86:*:3.2:*)
+ if test -f /usr/options/cb.name; then
+ UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+ echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+ elif /bin/uname -X 2>/dev/null >/dev/null ; then
+ UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
+ (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
+ (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
+ && UNAME_MACHINE=i586
+ (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \
+ && UNAME_MACHINE=i686
+ (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \
+ && UNAME_MACHINE=i686
+ echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+ else
+ echo ${UNAME_MACHINE}-pc-sysv32
+ fi
+ exit 0 ;;
+ i?86:*DOS:*:*)
+ echo ${UNAME_MACHINE}-pc-msdosdjgpp
+ exit 0 ;;
+ pc:*:*:*)
+ # Left here for compatibility:
+ # uname -m prints for DJGPP always 'pc', but it prints nothing about
+ # the processor, so we play safe by assuming i386.
+ echo i386-pc-msdosdjgpp
+ exit 0 ;;
+ Intel:Mach:3*:*)
+ echo i386-pc-mach3
+ exit 0 ;;
+ paragon:*:*:*)
+ echo i860-intel-osf1
+ exit 0 ;;
+ i860:*:4.*:*) # i860-SVR4
+ if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+ echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+ else # Add other i860-SVR4 vendors below as they are discovered.
+ echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
+ fi
+ exit 0 ;;
+ mini*:CTIX:SYS*5:*)
+ # "miniframe"
+ echo m68010-convergent-sysv
+ exit 0 ;;
+ M68*:*:R3V[567]*:*)
+ test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
+ 3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
+ OS_REL=''
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && echo i486-ncr-sysv4.3${OS_REL} && exit 0
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
+ 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && echo i486-ncr-sysv4 && exit 0 ;;
+ m68*:LynxOS:2.*:*)
+ echo m68k-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ mc68030:UNIX_System_V:4.*:*)
+ echo m68k-atari-sysv4
+ exit 0 ;;
+ i?86:LynxOS:2.*:* | i?86:LynxOS:3.[01]*:*)
+ echo i386-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ TSUNAMI:LynxOS:2.*:*)
+ echo sparc-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*)
+ echo rs6000-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ SM[BE]S:UNIX_SV:*:*)
+ echo mips-dde-sysv${UNAME_RELEASE}
+ exit 0 ;;
+ RM*:ReliantUNIX-*:*:*)
+ echo mips-sni-sysv4
+ exit 0 ;;
+ RM*:SINIX-*:*:*)
+ echo mips-sni-sysv4
+ exit 0 ;;
+ *:SINIX-*:*:*)
+ if uname -p 2>/dev/null >/dev/null ; then
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ echo ${UNAME_MACHINE}-sni-sysv4
+ else
+ echo ns32k-sni-sysv
+ fi
+ exit 0 ;;
+ PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+ # says <Richard.M.Bartel@ccMail.Census.GOV>
+ echo i586-unisys-sysv4
+ exit 0 ;;
+ *:UNIX_System_V:4*:FTX*)
+ # From Gerald Hewes <hewes@openmarket.com>.
+ # How about differentiating between stratus architectures? -djm
+ echo hppa1.1-stratus-sysv4
+ exit 0 ;;
+ *:*:*:FTX*)
+ # From seanf@swdc.stratus.com.
+ echo i860-stratus-sysv4
+ exit 0 ;;
+ mc68*:A/UX:*:*)
+ echo m68k-apple-aux${UNAME_RELEASE}
+ exit 0 ;;
+ news*:NEWS-OS:6*:*)
+ echo mips-sony-newsos6
+ exit 0 ;;
+ R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+ if [ -d /usr/nec ]; then
+ echo mips-nec-sysv${UNAME_RELEASE}
+ else
+ echo mips-unknown-sysv${UNAME_RELEASE}
+ fi
+ exit 0 ;;
+ BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
+ echo powerpc-be-beos
+ exit 0 ;;
+ BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
+ echo powerpc-apple-beos
+ exit 0 ;;
+ BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
+ echo i586-pc-beos
+ exit 0 ;;
+ SX-4:SUPER-UX:*:*)
+ echo sx4-nec-superux${UNAME_RELEASE}
+ exit 0 ;;
+ SX-5:SUPER-UX:*:*)
+ echo sx5-nec-superux${UNAME_RELEASE}
+ exit 0 ;;
+ Power*:Rhapsody:*:*)
+ echo powerpc-apple-rhapsody${UNAME_RELEASE}
+ exit 0 ;;
+ *:Rhapsody:*:*)
+ echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+ exit 0 ;;
+ *:Darwin:*:*)
+ echo `uname -p`-apple-darwin${UNAME_RELEASE}
+ exit 0 ;;
+ *:procnto*:*:* | *:QNX:[0123456789]*:*)
+ if test "${UNAME_MACHINE}" = "x86pc"; then
+ UNAME_MACHINE=pc
+ fi
+ echo `uname -p`-${UNAME_MACHINE}-nto-qnx
+ exit 0 ;;
+ *:QNX:*:4*)
+ echo i386-pc-qnx
+ exit 0 ;;
+ NSR-[KW]:NONSTOP_KERNEL:*:*)
+ echo nsr-tandem-nsk${UNAME_RELEASE}
+ exit 0 ;;
+ BS2000:POSIX*:*:*)
+ echo bs2000-siemens-sysv
+ exit 0 ;;
+ DS/*:UNIX_System_V:*:*)
+ echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+ exit 0 ;;
+ *:Plan9:*:*)
+ # "uname -m" is not consistent, so use $cputype instead. 386
+ # is converted to i386 for consistency with other x86
+ # operating systems.
+ if test "$cputype" = "386"; then
+ UNAME_MACHINE=i386
+ else
+ UNAME_MACHINE="$cputype"
+ fi
+ echo ${UNAME_MACHINE}-unknown-plan9
+ exit 0 ;;
+ *:OS/2:*:*)
+ echo ${UNAME_MACHINE}-pc-os2_emx
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+ /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
+ I don't know.... */
+ printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+ printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+ "4"
+#else
+ ""
+#endif
+ ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+ printf ("arm-acorn-riscix"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+ printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+ int version;
+ version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+ if (version < 4)
+ printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+ else
+ printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+ exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+ printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+ printf ("ns32k-encore-mach\n"); exit (0);
+#else
+ printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+ printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+ printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+ printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+ struct utsname un;
+
+ uname(&un);
+
+ if (strncmp(un.version, "V2", 2) == 0) {
+ printf ("i386-sequent-ptx2\n"); exit (0);
+ }
+ if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+ printf ("i386-sequent-ptx1\n"); exit (0);
+ }
+ printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+#if !defined (ultrix)
+ printf ("vax-dec-bsd\n"); exit (0);
+#else
+ printf ("vax-dec-ultrix\n"); exit (0);
+#endif
+#endif
+
+#if defined (alliant) && defined (i860)
+ printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+ exit (1);
+}
+EOF
+
+$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm $dummy.c $dummy && exit 0
+rm -f $dummy.c $dummy
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+ case `getsysinfo -f cpu_type` in
+ c1*)
+ echo c1-convex-bsd
+ exit 0 ;;
+ c2*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit 0 ;;
+ c34*)
+ echo c34-convex-bsd
+ exit 0 ;;
+ c38*)
+ echo c38-convex-bsd
+ exit 0 ;;
+ c4*)
+ echo c4-convex-bsd
+ exit 0 ;;
+ esac
+fi
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+The $version version of this script cannot recognize your system type.
+Please download the most up to date version of the config scripts:
+
+ ftp://ftp.gnu.org/pub/gnu/config/
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess version = $version
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo = `(hostinfo) 2>/dev/null`
+/bin/universe = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "version='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
--- /dev/null
+#! /bin/sh
+# Configuration validation subroutine script, version 1.1.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
+# Free Software Foundation, Inc.
+
+version='2000-09-11'
+
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine. It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Please send patches to <config-patches@gnu.org>.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support. The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+ $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -V, --version print version number, then exit"
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case "$1" in
+ --version | --vers* | -V )
+ echo "$version" ; exit 0 ;;
+ --help | --h* | -h )
+ echo "$usage"; exit 0 ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ exec >&2
+ echo "$me: invalid option $1"
+ echo "$help"
+ exit 1 ;;
+
+ *local*)
+ # First pass through any local machine types.
+ echo $1
+ exit 0;;
+
+ * )
+ break ;;
+ esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+ exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+ exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+ nto-qnx* | linux-gnu*)
+ os=-$maybe_os
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+ ;;
+ *)
+ basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+ if [ $basic_machine != $1 ]
+ then os=`echo $1 | sed 's/.*-/-/'`
+ else os=; fi
+ ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work. We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+ -sun*os*)
+ # Prevent following clause from handling this invalid input.
+ ;;
+ -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+ -apple | -axis)
+ os=
+ basic_machine=$1
+ ;;
+ -sim | -cisco | -oki | -wec | -winbond)
+ os=
+ basic_machine=$1
+ ;;
+ -scout)
+ ;;
+ -wrs)
+ os=-vxworks
+ basic_machine=$1
+ ;;
+ -hiux*)
+ os=-hiuxwe2
+ ;;
+ -sco5)
+ os=-sco3.2v5
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco4)
+ os=-sco3.2v4
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2.[4-9]*)
+ os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2v[4-9]*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco*)
+ os=-sco3.2v2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -udk*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -isc)
+ os=-isc2.2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -clix*)
+ basic_machine=clipper-intergraph
+ ;;
+ -isc*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -lynx*)
+ os=-lynxos
+ ;;
+ -ptx*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+ ;;
+ -windowsnt*)
+ os=`echo $os | sed -e 's/windowsnt/winnt/'`
+ ;;
+ -psos*)
+ os=-psos
+ ;;
+ -mint | -mint[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+ # Recognize the basic CPU types without company name.
+ # Some are omitted here because they have special meanings below.
+ tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \
+ | arme[lb] | armv[2345] | armv[345][lb] | pyramid | mn10200 | mn10300 | tron | a29k \
+ | 580 | i960 | h8300 \
+ | x86 | ppcbe | mipsbe | mipsle | shbe | shle | armbe | armle \
+ | hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \
+ | hppa64 \
+ | alpha | alphaev[4-8] | alphaev56 | alphapca5[67] \
+ | alphaev6[78] \
+ | we32k | ns16k | clipper | i370 | sh | sh[34] \
+ | powerpc | powerpcle \
+ | 1750a | dsp16xx | pdp11 | mips16 | mips64 | mipsel | mips64el \
+ | mips64orion | mips64orionel | mipstx39 | mipstx39el \
+ | mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \
+ | mips64vr5000 | miprs64vr5000el | mcore \
+ | sparc | sparclet | sparclite | sparc64 | sparcv9 | v850 | c4x \
+ | thumb | d10v | d30v | fr30 | avr)
+ basic_machine=$basic_machine-unknown
+ ;;
+ m6811 | m68hc11 | m6812 | m68hc12)
+ # Motorola 68HC11/12.
+ basic_machine=$basic_machine-unknown
+ os=-none
+ ;;
+ m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | h8500 | w65 | pj | pjl)
+ ;;
+
+ # We use `pc' rather than `unknown'
+ # because (1) that's what they normally are, and
+ # (2) the word "unknown" tends to confuse beginning users.
+ i[234567]86 | x86_64)
+ basic_machine=$basic_machine-pc
+ ;;
+ # Object if more than one company name word.
+ *-*-*)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+ # Recognize the basic CPU types with company name.
+ # FIXME: clean up the formatting here.
+ vax-* | tahoe-* | i[234567]86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \
+ | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \
+ | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
+ | power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \
+ | xmp-* | ymp-* \
+ | x86-* | ppcbe-* | mipsbe-* | mipsle-* | shbe-* | shle-* | armbe-* | armle-* \
+ | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* \
+ | hppa2.0n-* | hppa64-* \
+ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphapca5[67]-* \
+ | alphaev6[78]-* \
+ | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \
+ | clipper-* | orion-* \
+ | sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
+ | sparc64-* | sparcv9-* | sparc86x-* | mips16-* | mips64-* | mipsel-* \
+ | mips64el-* | mips64orion-* | mips64orionel-* \
+ | mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \
+ | mipstx39-* | mipstx39el-* | mcore-* \
+ | f301-* | armv*-* | s390-* | sv1-* | t3e-* \
+ | m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \
+ | thumb-* | v850-* | d30v-* | tic30-* | c30-* | fr30-* \
+ | bs2000-* | tic54x-* | c54x-* | x86_64-*)
+ ;;
+ # Recognize the various machine names and aliases which stand
+ # for a CPU type and a company and sometimes even an OS.
+ 386bsd)
+ basic_machine=i386-unknown
+ os=-bsd
+ ;;
+ 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+ basic_machine=m68000-att
+ ;;
+ 3b*)
+ basic_machine=we32k-att
+ ;;
+ a29khif)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ adobe68k)
+ basic_machine=m68010-adobe
+ os=-scout
+ ;;
+ alliant | fx80)
+ basic_machine=fx80-alliant
+ ;;
+ altos | altos3068)
+ basic_machine=m68k-altos
+ ;;
+ am29k)
+ basic_machine=a29k-none
+ os=-bsd
+ ;;
+ amdahl)
+ basic_machine=580-amdahl
+ os=-sysv
+ ;;
+ amiga | amiga-*)
+ basic_machine=m68k-unknown
+ ;;
+ amigaos | amigados)
+ basic_machine=m68k-unknown
+ os=-amigaos
+ ;;
+ amigaunix | amix)
+ basic_machine=m68k-unknown
+ os=-sysv4
+ ;;
+ apollo68)
+ basic_machine=m68k-apollo
+ os=-sysv
+ ;;
+ apollo68bsd)
+ basic_machine=m68k-apollo
+ os=-bsd
+ ;;
+ aux)
+ basic_machine=m68k-apple
+ os=-aux
+ ;;
+ balance)
+ basic_machine=ns32k-sequent
+ os=-dynix
+ ;;
+ convex-c1)
+ basic_machine=c1-convex
+ os=-bsd
+ ;;
+ convex-c2)
+ basic_machine=c2-convex
+ os=-bsd
+ ;;
+ convex-c32)
+ basic_machine=c32-convex
+ os=-bsd
+ ;;
+ convex-c34)
+ basic_machine=c34-convex
+ os=-bsd
+ ;;
+ convex-c38)
+ basic_machine=c38-convex
+ os=-bsd
+ ;;
+ cray | ymp)
+ basic_machine=ymp-cray
+ os=-unicos
+ ;;
+ cray2)
+ basic_machine=cray2-cray
+ os=-unicos
+ ;;
+ [ctj]90-cray)
+ basic_machine=c90-cray
+ os=-unicos
+ ;;
+ crds | unos)
+ basic_machine=m68k-crds
+ ;;
+ cris | cris-* | etrax*)
+ basic_machine=cris-axis
+ ;;
+ da30 | da30-*)
+ basic_machine=m68k-da30
+ ;;
+ decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+ basic_machine=mips-dec
+ ;;
+ delta | 3300 | motorola-3300 | motorola-delta \
+ | 3300-motorola | delta-motorola)
+ basic_machine=m68k-motorola
+ ;;
+ delta88)
+ basic_machine=m88k-motorola
+ os=-sysv3
+ ;;
+ dpx20 | dpx20-*)
+ basic_machine=rs6000-bull
+ os=-bosx
+ ;;
+ dpx2* | dpx2*-bull)
+ basic_machine=m68k-bull
+ os=-sysv3
+ ;;
+ ebmon29k)
+ basic_machine=a29k-amd
+ os=-ebmon
+ ;;
+ elxsi)
+ basic_machine=elxsi-elxsi
+ os=-bsd
+ ;;
+ encore | umax | mmax)
+ basic_machine=ns32k-encore
+ ;;
+ es1800 | OSE68k | ose68k | ose | OSE)
+ basic_machine=m68k-ericsson
+ os=-ose
+ ;;
+ fx2800)
+ basic_machine=i860-alliant
+ ;;
+ genix)
+ basic_machine=ns32k-ns
+ ;;
+ gmicro)
+ basic_machine=tron-gmicro
+ os=-sysv
+ ;;
+ h3050r* | hiux*)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ h8300hms)
+ basic_machine=h8300-hitachi
+ os=-hms
+ ;;
+ h8300xray)
+ basic_machine=h8300-hitachi
+ os=-xray
+ ;;
+ h8500hms)
+ basic_machine=h8500-hitachi
+ os=-hms
+ ;;
+ harris)
+ basic_machine=m88k-harris
+ os=-sysv3
+ ;;
+ hp300-*)
+ basic_machine=m68k-hp
+ ;;
+ hp300bsd)
+ basic_machine=m68k-hp
+ os=-bsd
+ ;;
+ hp300hpux)
+ basic_machine=m68k-hp
+ os=-hpux
+ ;;
+ hp3k9[0-9][0-9] | hp9[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k2[0-9][0-9] | hp9k31[0-9])
+ basic_machine=m68000-hp
+ ;;
+ hp9k3[2-9][0-9])
+ basic_machine=m68k-hp
+ ;;
+ hp9k6[0-9][0-9] | hp6[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k7[0-79][0-9] | hp7[0-79][0-9])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k78[0-9] | hp78[0-9])
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][13679] | hp8[0-9][13679])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][0-9] | hp8[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hppa-next)
+ os=-nextstep3
+ ;;
+ hppaosf)
+ basic_machine=hppa1.1-hp
+ os=-osf
+ ;;
+ hppro)
+ basic_machine=hppa1.1-hp
+ os=-proelf
+ ;;
+ i370-ibm* | ibm*)
+ basic_machine=i370-ibm
+ ;;
+# I'm not sure what "Sysv32" means. Should this be sysv3.2?
+ i[34567]86v32)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv32
+ ;;
+ i[34567]86v4*)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv4
+ ;;
+ i[34567]86v)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv
+ ;;
+ i[34567]86sol2)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-solaris2
+ ;;
+ i386mach)
+ basic_machine=i386-mach
+ os=-mach
+ ;;
+ i386-vsta | vsta)
+ basic_machine=i386-unknown
+ os=-vsta
+ ;;
+ i386-go32 | go32)
+ basic_machine=i386-unknown
+ os=-go32
+ ;;
+ i386-mingw32 | mingw32)
+ basic_machine=i386-unknown
+ os=-mingw32
+ ;;
+ i[34567]86-pw32 | pw32)
+ basic_machine=i586-unknown
+ os=-pw32
+ ;;
+ iris | iris4d)
+ basic_machine=mips-sgi
+ case $os in
+ -irix*)
+ ;;
+ *)
+ os=-irix4
+ ;;
+ esac
+ ;;
+ isi68 | isi)
+ basic_machine=m68k-isi
+ os=-sysv
+ ;;
+ m88k-omron*)
+ basic_machine=m88k-omron
+ ;;
+ magnum | m3230)
+ basic_machine=mips-mips
+ os=-sysv
+ ;;
+ merlin)
+ basic_machine=ns32k-utek
+ os=-sysv
+ ;;
+ miniframe)
+ basic_machine=m68000-convergent
+ ;;
+ *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+ mipsel*-linux*)
+ basic_machine=mipsel-unknown
+ os=-linux-gnu
+ ;;
+ mips*-linux*)
+ basic_machine=mips-unknown
+ os=-linux-gnu
+ ;;
+ mips3*-*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+ ;;
+ mips3*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+ ;;
+ mmix*)
+ basic_machine=mmix-knuth
+ os=-mmixware
+ ;;
+ monitor)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ msdos)
+ basic_machine=i386-unknown
+ os=-msdos
+ ;;
+ mvs)
+ basic_machine=i370-ibm
+ os=-mvs
+ ;;
+ ncr3000)
+ basic_machine=i486-ncr
+ os=-sysv4
+ ;;
+ netbsd386)
+ basic_machine=i386-unknown
+ os=-netbsd
+ ;;
+ netwinder)
+ basic_machine=armv4l-rebel
+ os=-linux
+ ;;
+ news | news700 | news800 | news900)
+ basic_machine=m68k-sony
+ os=-newsos
+ ;;
+ news1000)
+ basic_machine=m68030-sony
+ os=-newsos
+ ;;
+ news-3600 | risc-news)
+ basic_machine=mips-sony
+ os=-newsos
+ ;;
+ necv70)
+ basic_machine=v70-nec
+ os=-sysv
+ ;;
+ next | m*-next )
+ basic_machine=m68k-next
+ case $os in
+ -nextstep* )
+ ;;
+ -ns2*)
+ os=-nextstep2
+ ;;
+ *)
+ os=-nextstep3
+ ;;
+ esac
+ ;;
+ nh3000)
+ basic_machine=m68k-harris
+ os=-cxux
+ ;;
+ nh[45]000)
+ basic_machine=m88k-harris
+ os=-cxux
+ ;;
+ nindy960)
+ basic_machine=i960-intel
+ os=-nindy
+ ;;
+ mon960)
+ basic_machine=i960-intel
+ os=-mon960
+ ;;
+ np1)
+ basic_machine=np1-gould
+ ;;
+ nsr-tandem)
+ basic_machine=nsr-tandem
+ ;;
+ op50n-* | op60c-*)
+ basic_machine=hppa1.1-oki
+ os=-proelf
+ ;;
+ OSE68000 | ose68000)
+ basic_machine=m68000-ericsson
+ os=-ose
+ ;;
+ os68k)
+ basic_machine=m68k-none
+ os=-os68k
+ ;;
+ pa-hitachi)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ paragon)
+ basic_machine=i860-intel
+ os=-osf
+ ;;
+ pbd)
+ basic_machine=sparc-tti
+ ;;
+ pbb)
+ basic_machine=m68k-tti
+ ;;
+ pc532 | pc532-*)
+ basic_machine=ns32k-pc532
+ ;;
+ pentium | p5 | k5 | k6 | nexen)
+ basic_machine=i586-pc
+ ;;
+ pentiumpro | p6 | 6x86 | athlon)
+ basic_machine=i686-pc
+ ;;
+ pentiumii | pentium2)
+ basic_machine=i786-pc
+ ;;
+ pentium-* | p5-* | k5-* | k6-* | nexen-*)
+ basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumpro-* | p6-* | 6x86-* | athlon-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumii-* | pentium2-*)
+ basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pn)
+ basic_machine=pn-gould
+ ;;
+ power) basic_machine=rs6000-ibm
+ ;;
+ ppc) basic_machine=powerpc-unknown
+ ;;
+ ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppcle | powerpclittle | ppc-le | powerpc-little)
+ basic_machine=powerpcle-unknown
+ ;;
+ ppcle-* | powerpclittle-*)
+ basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ps2)
+ basic_machine=i386-ibm
+ ;;
+ rom68k)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ rm[46]00)
+ basic_machine=mips-siemens
+ ;;
+ rtpc | rtpc-*)
+ basic_machine=romp-ibm
+ ;;
+ sa29200)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ sequent)
+ basic_machine=i386-sequent
+ ;;
+ sh)
+ basic_machine=sh-hitachi
+ os=-hms
+ ;;
+ sparclite-wrs)
+ basic_machine=sparclite-wrs
+ os=-vxworks
+ ;;
+ sps7)
+ basic_machine=m68k-bull
+ os=-sysv2
+ ;;
+ spur)
+ basic_machine=spur-unknown
+ ;;
+ st2000)
+ basic_machine=m68k-tandem
+ ;;
+ stratus)
+ basic_machine=i860-stratus
+ os=-sysv4
+ ;;
+ sun2)
+ basic_machine=m68000-sun
+ ;;
+ sun2os3)
+ basic_machine=m68000-sun
+ os=-sunos3
+ ;;
+ sun2os4)
+ basic_machine=m68000-sun
+ os=-sunos4
+ ;;
+ sun3os3)
+ basic_machine=m68k-sun
+ os=-sunos3
+ ;;
+ sun3os4)
+ basic_machine=m68k-sun
+ os=-sunos4
+ ;;
+ sun4os3)
+ basic_machine=sparc-sun
+ os=-sunos3
+ ;;
+ sun4os4)
+ basic_machine=sparc-sun
+ os=-sunos4
+ ;;
+ sun4sol2)
+ basic_machine=sparc-sun
+ os=-solaris2
+ ;;
+ sun3 | sun3-*)
+ basic_machine=m68k-sun
+ ;;
+ sun4)
+ basic_machine=sparc-sun
+ ;;
+ sun386 | sun386i | roadrunner)
+ basic_machine=i386-sun
+ ;;
+ sv1)
+ basic_machine=sv1-cray
+ os=-unicos
+ ;;
+ symmetry)
+ basic_machine=i386-sequent
+ os=-dynix
+ ;;
+ t3e)
+ basic_machine=t3e-cray
+ os=-unicos
+ ;;
+ tic54x | c54x*)
+ basic_machine=tic54x-unknown
+ os=-coff
+ ;;
+ tx39)
+ basic_machine=mipstx39-unknown
+ ;;
+ tx39el)
+ basic_machine=mipstx39el-unknown
+ ;;
+ tower | tower-32)
+ basic_machine=m68k-ncr
+ ;;
+ udi29k)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ ultra3)
+ basic_machine=a29k-nyu
+ os=-sym1
+ ;;
+ v810 | necv810)
+ basic_machine=v810-nec
+ os=-none
+ ;;
+ vaxv)
+ basic_machine=vax-dec
+ os=-sysv
+ ;;
+ vms)
+ basic_machine=vax-dec
+ os=-vms
+ ;;
+ vpp*|vx|vx-*)
+ basic_machine=f301-fujitsu
+ ;;
+ vxworks960)
+ basic_machine=i960-wrs
+ os=-vxworks
+ ;;
+ vxworks68)
+ basic_machine=m68k-wrs
+ os=-vxworks
+ ;;
+ vxworks29k)
+ basic_machine=a29k-wrs
+ os=-vxworks
+ ;;
+ w65*)
+ basic_machine=w65-wdc
+ os=-none
+ ;;
+ w89k-*)
+ basic_machine=hppa1.1-winbond
+ os=-proelf
+ ;;
+ xmp)
+ basic_machine=xmp-cray
+ os=-unicos
+ ;;
+ xps | xps100)
+ basic_machine=xps100-honeywell
+ ;;
+ z8k-*-coff)
+ basic_machine=z8k-unknown
+ os=-sim
+ ;;
+ none)
+ basic_machine=none-none
+ os=-none
+ ;;
+
+# Here we handle the default manufacturer of certain CPU types. It is in
+# some cases the only manufacturer, in others, it is the most popular.
+ w89k)
+ basic_machine=hppa1.1-winbond
+ ;;
+ op50n)
+ basic_machine=hppa1.1-oki
+ ;;
+ op60c)
+ basic_machine=hppa1.1-oki
+ ;;
+ mips)
+ if [ x$os = x-linux-gnu ]; then
+ basic_machine=mips-unknown
+ else
+ basic_machine=mips-mips
+ fi
+ ;;
+ romp)
+ basic_machine=romp-ibm
+ ;;
+ rs6000)
+ basic_machine=rs6000-ibm
+ ;;
+ vax)
+ basic_machine=vax-dec
+ ;;
+ pdp11)
+ basic_machine=pdp11-dec
+ ;;
+ we32k)
+ basic_machine=we32k-att
+ ;;
+ sh3 | sh4)
+ base_machine=sh-unknown
+ ;;
+ sparc | sparcv9)
+ basic_machine=sparc-sun
+ ;;
+ cydra)
+ basic_machine=cydra-cydrome
+ ;;
+ orion)
+ basic_machine=orion-highlevel
+ ;;
+ orion105)
+ basic_machine=clipper-highlevel
+ ;;
+ mac | mpw | mac-mpw)
+ basic_machine=m68k-apple
+ ;;
+ pmac | pmac-mpw)
+ basic_machine=powerpc-apple
+ ;;
+ c4x*)
+ basic_machine=c4x-none
+ os=-coff
+ ;;
+ *)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+ *-digital*)
+ basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+ ;;
+ *-commodore*)
+ basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+ ;;
+ *)
+ ;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+ # First match some system type aliases
+ # that might get confused with valid system types.
+ # -solaris* is a basic system type, with this one exception.
+ -solaris1 | -solaris1.*)
+ os=`echo $os | sed -e 's|solaris1|sunos4|'`
+ ;;
+ -solaris)
+ os=-solaris2
+ ;;
+ -svr4*)
+ os=-sysv4
+ ;;
+ -unixware*)
+ os=-sysv4.2uw
+ ;;
+ -gnu/linux*)
+ os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+ ;;
+ # First accept the basic system types.
+ # The portable systems comes first.
+ # Each alternative MUST END IN A *, to match a version number.
+ # -sysv* is not here because it comes later, after sysvr4.
+ -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+ | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
+ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
+ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+ | -aos* \
+ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+ | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
+ | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+ | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
+ | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \
+ | -openstep* | -oskit* | -conix* | -pw32*)
+ # Remember, each alternative MUST END IN *, to match a version number.
+ ;;
+ -qnx*)
+ case $basic_machine in
+ x86-* | i[34567]86-*)
+ ;;
+ *)
+ os=-nto$os
+ ;;
+ esac
+ ;;
+ -nto*)
+ os=-nto-qnx
+ ;;
+ -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+ | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
+ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+ ;;
+ -mac*)
+ os=`echo $os | sed -e 's|mac|macos|'`
+ ;;
+ -linux*)
+ os=`echo $os | sed -e 's|linux|linux-gnu|'`
+ ;;
+ -sunos5*)
+ os=`echo $os | sed -e 's|sunos5|solaris2|'`
+ ;;
+ -sunos6*)
+ os=`echo $os | sed -e 's|sunos6|solaris3|'`
+ ;;
+ -opened*)
+ os=-openedition
+ ;;
+ -wince*)
+ os=-wince
+ ;;
+ -osfrose*)
+ os=-osfrose
+ ;;
+ -osf*)
+ os=-osf
+ ;;
+ -utek*)
+ os=-bsd
+ ;;
+ -dynix*)
+ os=-bsd
+ ;;
+ -acis*)
+ os=-aos
+ ;;
+ -386bsd)
+ os=-bsd
+ ;;
+ -ctix* | -uts*)
+ os=-sysv
+ ;;
+ -ns2 )
+ os=-nextstep2
+ ;;
+ -nsk*)
+ os=-nsk
+ ;;
+ # Preserve the version number of sinix5.
+ -sinix5.*)
+ os=`echo $os | sed -e 's|sinix|sysv|'`
+ ;;
+ -sinix*)
+ os=-sysv4
+ ;;
+ -triton*)
+ os=-sysv3
+ ;;
+ -oss*)
+ os=-sysv3
+ ;;
+ -svr4)
+ os=-sysv4
+ ;;
+ -svr3)
+ os=-sysv3
+ ;;
+ -sysvr4)
+ os=-sysv4
+ ;;
+ # This must come after -sysvr4.
+ -sysv*)
+ ;;
+ -ose*)
+ os=-ose
+ ;;
+ -es1800*)
+ os=-ose
+ ;;
+ -xenix)
+ os=-xenix
+ ;;
+ -*mint | -*MiNT)
+ os=-mint
+ ;;
+ -none)
+ ;;
+ *)
+ # Get rid of the `-' at the beginning of $os.
+ os=`echo $os | sed 's/[^-]*-//'`
+ echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system. Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+ *-acorn)
+ os=-riscix1.2
+ ;;
+ arm*-rebel)
+ os=-linux
+ ;;
+ arm*-semi)
+ os=-aout
+ ;;
+ pdp11-*)
+ os=-none
+ ;;
+ *-dec | vax-*)
+ os=-ultrix4.2
+ ;;
+ m68*-apollo)
+ os=-domain
+ ;;
+ i386-sun)
+ os=-sunos4.0.2
+ ;;
+ m68000-sun)
+ os=-sunos3
+ # This also exists in the configure program, but was not the
+ # default.
+ # os=-sunos4
+ ;;
+ m68*-cisco)
+ os=-aout
+ ;;
+ mips*-cisco)
+ os=-elf
+ ;;
+ mips*-*)
+ os=-elf
+ ;;
+ *-tti) # must be before sparc entry or we get the wrong os.
+ os=-sysv3
+ ;;
+ sparc-* | *-sun)
+ os=-sunos4.1.1
+ ;;
+ *-be)
+ os=-beos
+ ;;
+ *-ibm)
+ os=-aix
+ ;;
+ *-wec)
+ os=-proelf
+ ;;
+ *-winbond)
+ os=-proelf
+ ;;
+ *-oki)
+ os=-proelf
+ ;;
+ *-hp)
+ os=-hpux
+ ;;
+ *-hitachi)
+ os=-hiux
+ ;;
+ i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+ os=-sysv
+ ;;
+ *-cbm)
+ os=-amigaos
+ ;;
+ *-dg)
+ os=-dgux
+ ;;
+ *-dolphin)
+ os=-sysv3
+ ;;
+ m68k-ccur)
+ os=-rtu
+ ;;
+ m88k-omron*)
+ os=-luna
+ ;;
+ *-next )
+ os=-nextstep
+ ;;
+ *-sequent)
+ os=-ptx
+ ;;
+ *-crds)
+ os=-unos
+ ;;
+ *-ns)
+ os=-genix
+ ;;
+ i370-*)
+ os=-mvs
+ ;;
+ *-next)
+ os=-nextstep3
+ ;;
+ *-gould)
+ os=-sysv
+ ;;
+ *-highlevel)
+ os=-bsd
+ ;;
+ *-encore)
+ os=-bsd
+ ;;
+ *-sgi)
+ os=-irix
+ ;;
+ *-siemens)
+ os=-sysv4
+ ;;
+ *-masscomp)
+ os=-rtu
+ ;;
+ f301-fujitsu)
+ os=-uxpv
+ ;;
+ *-rom68k)
+ os=-coff
+ ;;
+ *-*bug)
+ os=-coff
+ ;;
+ *-apple)
+ os=-macos
+ ;;
+ *-atari*)
+ os=-mint
+ ;;
+ *)
+ os=-none
+ ;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer. We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+ *-unknown)
+ case $os in
+ -riscix*)
+ vendor=acorn
+ ;;
+ -sunos*)
+ vendor=sun
+ ;;
+ -aix*)
+ vendor=ibm
+ ;;
+ -beos*)
+ vendor=be
+ ;;
+ -hpux*)
+ vendor=hp
+ ;;
+ -mpeix*)
+ vendor=hp
+ ;;
+ -hiux*)
+ vendor=hitachi
+ ;;
+ -unos*)
+ vendor=crds
+ ;;
+ -dgux*)
+ vendor=dg
+ ;;
+ -luna*)
+ vendor=omron
+ ;;
+ -genix*)
+ vendor=ns
+ ;;
+ -mvs* | -opened*)
+ vendor=ibm
+ ;;
+ -ptx*)
+ vendor=sequent
+ ;;
+ -vxsim* | -vxworks*)
+ vendor=wrs
+ ;;
+ -aux*)
+ vendor=apple
+ ;;
+ -hms*)
+ vendor=hitachi
+ ;;
+ -mpw* | -macos*)
+ vendor=apple
+ ;;
+ -*mint | -*MiNT)
+ vendor=atari
+ ;;
+ esac
+ basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+ ;;
+esac
+
+echo $basic_machine$os
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "version='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
--- /dev/null
+#! /bin/sh
+
+# Guess values for system-dependent variables and create Makefiles.
+# Generated automatically using autoconf version 2.13
+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+
+# Defaults:
+ac_help=
+ac_default_prefix=/usr/local
+# Any additions from configure.in:
+ac_help="$ac_help
+ --with-afs-sysname=sys use sys for the afs sysname
+"
+ac_help="$ac_help
+ --enable-obsolete enable obsolete portions of AFS (mpp, ntp and package)"
+ac_help="$ac_help
+ --enable-insecure enable insecure portions of AFS (ftpd, inetd, rcp, rlogind and rsh)"
+ac_help="$ac_help
+ --disable-afsdb disable AFSDB RR support"
+ac_help="$ac_help
+ --enable-bos-restricted-mode enable bosserver restricted mode which disables certain bosserver functionality"
+ac_help="$ac_help
+ --enable-namei-fileserver force compilation of namei fileserver in preference to inode fileserver"
+ac_help="$ac_help
+ --with-linux-kernel-headers=path use the kernel headers found at path(optional, defaults to /usr/src/linux)
+"
+ac_help="$ac_help
+ --enable-bigendian the target is big endian"
+ac_help="$ac_help
+ --enable-littleendian the target is little endian"
+
+# Initialize some variables set by options.
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+build=NONE
+cache_file=./config.cache
+exec_prefix=NONE
+host=NONE
+no_create=
+nonopt=NONE
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+target=NONE
+verbose=
+x_includes=NONE
+x_libraries=NONE
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+# Initialize some other variables.
+subdirs=
+MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
+
+ac_prev=
+for ac_option
+do
+
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval "$ac_prev=\$ac_option"
+ ac_prev=
+ continue
+ fi
+
+ case "$ac_option" in
+ -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+ *) ac_optarg= ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case "$ac_option" in
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir="$ac_optarg" ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build="$ac_optarg" ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file="$ac_optarg" ;;
+
+ -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+ | --da=*)
+ datadir="$ac_optarg" ;;
+
+ -disable-* | --disable-*)
+ ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+ # Reject names that are not valid shell variable names.
+ if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+ { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+ fi
+ ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+ eval "enable_${ac_feature}=no" ;;
+
+ -enable-* | --enable-*)
+ ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+ # Reject names that are not valid shell variable names.
+ if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+ { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+ fi
+ ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+ case "$ac_option" in
+ *=*) ;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "enable_${ac_feature}='$ac_optarg'" ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix="$ac_optarg" ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he)
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat << EOF
+Usage: configure [options] [host]
+Options: [defaults in brackets after descriptions]
+Configuration:
+ --cache-file=FILE cache test results in FILE
+ --help print this message
+ --no-create do not create output files
+ --quiet, --silent do not print \`checking...' messages
+ --version print the version of autoconf that created configure
+Directory and file names:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [same as prefix]
+ --bindir=DIR user executables in DIR [EPREFIX/bin]
+ --sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
+ --libexecdir=DIR program executables in DIR [EPREFIX/libexec]
+ --datadir=DIR read-only architecture-independent data in DIR
+ [PREFIX/share]
+ --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data in DIR
+ [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
+ --libdir=DIR object code libraries in DIR [EPREFIX/lib]
+ --includedir=DIR C header files in DIR [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
+ --infodir=DIR info documentation in DIR [PREFIX/info]
+ --mandir=DIR man documentation in DIR [PREFIX/man]
+ --srcdir=DIR find the sources in DIR [configure dir or ..]
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM
+ run sed PROGRAM on installed program names
+EOF
+ cat << EOF
+Host type:
+ --build=BUILD configure for building on BUILD [BUILD=HOST]
+ --host=HOST configure for HOST [guessed]
+ --target=TARGET configure for TARGET [TARGET=HOST]
+Features and packages:
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --x-includes=DIR X include files are in DIR
+ --x-libraries=DIR X library files are in DIR
+EOF
+ if test -n "$ac_help"; then
+ echo "--enable and --with options recognized:$ac_help"
+ fi
+ exit 0 ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host="$ac_optarg" ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir="$ac_optarg" ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir="$ac_optarg" ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir="$ac_optarg" ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir="$ac_optarg" ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst \
+ | --locals | --local | --loca | --loc | --lo)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+ localstatedir="$ac_optarg" ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir="$ac_optarg" ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir="$ac_optarg" ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix="$ac_optarg" ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix="$ac_optarg" ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix="$ac_optarg" ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name="$ac_optarg" ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir="$ac_optarg" ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir="$ac_optarg" ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site="$ac_optarg" ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir="$ac_optarg" ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir="$ac_optarg" ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target="$ac_optarg" ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers)
+ echo "configure generated by autoconf version 2.13"
+ exit 0 ;;
+
+ -with-* | --with-*)
+ ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+ # Reject names that are not valid shell variable names.
+ if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+ { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+ fi
+ ac_package=`echo $ac_package| sed 's/-/_/g'`
+ case "$ac_option" in
+ *=*) ;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "with_${ac_package}='$ac_optarg'" ;;
+
+ -without-* | --without-*)
+ ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+ # Reject names that are not valid shell variable names.
+ if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+ { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+ fi
+ ac_package=`echo $ac_package| sed 's/-/_/g'`
+ eval "with_${ac_package}=no" ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes="$ac_optarg" ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries="$ac_optarg" ;;
+
+ -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+ ;;
+
+ *)
+ if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+ echo "configure: warning: $ac_option: invalid host type" 1>&2
+ fi
+ if test "x$nonopt" != xNONE; then
+ { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+ fi
+ nonopt="$ac_option"
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+fi
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 6 checking for... messages and results
+# 5 compiler messages saved in config.log
+if test "$silent" = yes; then
+ exec 6>/dev/null
+else
+ exec 6>&1
+fi
+exec 5>./config.log
+
+echo "\
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+" 1>&5
+
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Also quote any args containing shell metacharacters.
+ac_configure_args=
+for ac_arg
+do
+ case "$ac_arg" in
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c) ;;
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+ ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+ *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+ esac
+done
+
+# NLS nuisances.
+# Only set these to C if already set. These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
+if test "${LANG+set}" = set; then LANG=C; export LANG; fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo > confdefs.h
+
+# A filename unique to this package, relative to the directory that
+# configure is in, which we can look for to find out if srcdir is correct.
+ac_unique_file=src/config/stds.h
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then its parent.
+ ac_prog=$0
+ ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+ test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+ srcdir=$ac_confdir
+ if test ! -r $srcdir/$ac_unique_file; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+ if test "$ac_srcdir_defaulted" = yes; then
+ { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+ else
+ { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+ fi
+fi
+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+ fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+ if test -r "$ac_site_file"; then
+ echo "loading site script $ac_site_file"
+ . "$ac_site_file"
+ fi
+done
+
+if test -r "$cache_file"; then
+ echo "loading cache $cache_file"
+ . $cache_file
+else
+ echo "creating cache $cache_file"
+ > $cache_file
+fi
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ac_exeext=
+ac_objext=o
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+ # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+ if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+ ac_n= ac_c='
+' ac_t=' '
+ else
+ ac_n=-n ac_c= ac_t=
+ fi
+else
+ ac_n= ac_c='\c' ac_t=
+fi
+
+
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:576: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ # Account for people who put trailing slashes in PATH elements.
+ case "$ac_dir/" in
+ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ if test -f $ac_dir/$ac_prog; then
+ if test $ac_prog = install &&
+ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ else
+ ac_cv_path_install="$ac_dir/$ac_prog -c"
+ break 2
+ fi
+ fi
+ done
+ ;;
+ esac
+ done
+ IFS="$ac_save_IFS"
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL="$ac_cv_path_install"
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL="$ac_install_sh"
+ fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
+echo "configure:629: checking whether build environment is sane" >&5
+# Just in case
+sleep 1
+echo timestamp > conftestfile
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftestfile`
+ fi
+ if test "$*" != "X $srcdir/configure conftestfile" \
+ && test "$*" != "X conftestfile $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ { echo "configure: error: ls -t appears to fail. Make sure there is not a broken
+alias in your environment" 1>&2; exit 1; }
+ fi
+
+ test "$2" = conftestfile
+ )
+then
+ # Ok.
+ :
+else
+ { echo "configure: error: newly created file is older than distributed files!
+Check your system clock" 1>&2; exit 1; }
+fi
+rm -f conftest*
+echo "$ac_t""yes" 1>&6
+if test "$program_transform_name" = s,x,x,; then
+ program_transform_name=
+else
+ # Double any \ or $. echo might interpret backslashes.
+ cat <<\EOF_SED > conftestsed
+s,\\,\\\\,g; s,\$,$$,g
+EOF_SED
+ program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
+ rm -f conftestsed
+fi
+test "$program_prefix" != NONE &&
+ program_transform_name="s,^,${program_prefix},; $program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
+
+# sed with no file args requires a program.
+test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+
+echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
+echo "configure:686: checking whether ${MAKE-make} sets \${MAKE}" >&5
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftestmake <<\EOF
+all:
+ @echo 'ac_maketemp="${MAKE}"'
+EOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+ eval ac_cv_prog_make_${ac_make}_set=yes
+else
+ eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftestmake
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ SET_MAKE=
+else
+ echo "$ac_t""no" 1>&6
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+
+PACKAGE=openafs
+
+VERSION=devel
+
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+ { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
+fi
+cat >> confdefs.h <<EOF
+#define PACKAGE "$PACKAGE"
+EOF
+
+cat >> confdefs.h <<EOF
+#define VERSION "$VERSION"
+EOF
+
+
+
+missing_dir=`cd $ac_aux_dir && pwd`
+echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
+echo "configure:732: checking for working aclocal" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (aclocal --version) < /dev/null > /dev/null 2>&1; then
+ ACLOCAL=aclocal
+ echo "$ac_t""found" 1>&6
+else
+ ACLOCAL="$missing_dir/missing aclocal"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
+echo "configure:745: checking for working autoconf" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (autoconf --version) < /dev/null > /dev/null 2>&1; then
+ AUTOCONF=autoconf
+ echo "$ac_t""found" 1>&6
+else
+ AUTOCONF="$missing_dir/missing autoconf"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working automake""... $ac_c" 1>&6
+echo "configure:758: checking for working automake" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (automake --version) < /dev/null > /dev/null 2>&1; then
+ AUTOMAKE=automake
+ echo "$ac_t""found" 1>&6
+else
+ AUTOMAKE="$missing_dir/missing automake"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
+echo "configure:771: checking for working autoheader" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (autoheader --version) < /dev/null > /dev/null 2>&1; then
+ AUTOHEADER=autoheader
+ echo "$ac_t""found" 1>&6
+else
+ AUTOHEADER="$missing_dir/missing autoheader"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
+echo "configure:784: checking for working makeinfo" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
+ MAKEINFO=makeinfo
+ echo "$ac_t""found" 1>&6
+else
+ MAKEINFO="$missing_dir/missing makeinfo"
+ echo "$ac_t""missing" 1>&6
+fi
+
+
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:804: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+ case $nonopt in
+ NONE)
+ if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+ else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+ fi ;;
+ *) host_alias=$nonopt ;;
+ esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+
+
+#BOZO_SAVE_CORES BOS_RESTRICTED_MODE BOS_NEW_CONFIG pam sia BITMAP_LATER FAST_RESTART
+# Check whether --with-afs-sysname or --without-afs-sysname was given.
+if test "${with_afs_sysname+set}" = set; then
+ withval="$with_afs_sysname"
+ :
+fi
+
+# Check whether --enable-obsolete or --disable-obsolete was given.
+if test "${enable_obsolete+set}" = set; then
+ enableval="$enable_obsolete"
+ :
+else
+ enable_obsolete="no"
+fi
+
+# Check whether --enable-insecure or --disable-insecure was given.
+if test "${enable_insecure+set}" = set; then
+ enableval="$enable_insecure"
+ :
+else
+ enable_insecure="no"
+fi
+
+# Check whether --enable-afsdb or --disable-afsdb was given.
+if test "${enable_afsdb+set}" = set; then
+ enableval="$enable_afsdb"
+ :
+else
+ enable_afsdb="yes"
+fi
+
+# Check whether --enable-bos-restricted-mode or --disable-bos-restricted-mode was given.
+if test "${enable_bos_restricted_mode+set}" = set; then
+ enableval="$enable_bos_restricted_mode"
+ :
+else
+ enable_bos_restricted_mode="no"
+fi
+
+# Check whether --enable-namei-fileserver or --disable-namei-fileserver was given.
+if test "${enable_namei_fileserver+set}" = set; then
+ enableval="$enable_namei_fileserver"
+ :
+else
+ enable_namei_fileserver="no"
+fi
+
+# Check whether --with-linux-kernel-headers or --without-linux-kernel-headers was given.
+if test "${with_linux_kernel_headers+set}" = set; then
+ withval="$with_linux_kernel_headers"
+ :
+fi
+
+
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:883: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="gcc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:913: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_prog_rejected=no
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# -gt 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ set dummy "$ac_dir/$ac_word" "$@"
+ shift
+ ac_cv_prog_CC="$@"
+ fi
+fi
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test -z "$CC"; then
+ case "`uname -s`" in
+ *win32* | *WIN32*)
+ # Extract the first word of "cl", so it can be a program name with args.
+set dummy cl; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:964: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="cl"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+ ;;
+ esac
+ fi
+ test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:996: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+cat > conftest.$ac_ext << EOF
+
+#line 1007 "configure"
+#include "confdefs.h"
+
+main(){return(0);}
+EOF
+if { (eval echo configure:1012: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ ac_cv_prog_cc_works=yes
+ # If we can't run a trivial program, we are probably using a cross compiler.
+ if (./conftest; exit) 2>/dev/null; then
+ ac_cv_prog_cc_cross=no
+ else
+ ac_cv_prog_cc_cross=yes
+ fi
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ ac_cv_prog_cc_works=no
+fi
+rm -fr conftest*
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
+if test $ac_cv_prog_cc_works = no; then
+ { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
+fi
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:1038: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+echo "configure:1043: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.c <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1052: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+ ac_cv_prog_gcc=yes
+else
+ ac_cv_prog_gcc=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+
+if test $ac_cv_prog_gcc = yes; then
+ GCC=yes
+else
+ GCC=
+fi
+
+ac_test_CFLAGS="${CFLAGS+set}"
+ac_save_CFLAGS="$CFLAGS"
+CFLAGS=
+echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:1071: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo 'void f(){}' > conftest.c
+if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+ ac_cv_prog_cc_g=yes
+else
+ ac_cv_prog_cc_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS="$ac_save_CFLAGS"
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+
+
+echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+echo "configure:1104: checking how to run the C preprocessor" >&5
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # This must be in double quotes, not single quotes, because CPP may get
+ # substituted into the Makefile and "${CC-cc}" will confuse make.
+ CPP="${CC-cc} -E"
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp.
+ cat > conftest.$ac_ext <<EOF
+#line 1119 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1125: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -E -traditional-cpp"
+ cat > conftest.$ac_ext <<EOF
+#line 1136 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1142: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -nologo -E"
+ cat > conftest.$ac_ext <<EOF
+#line 1153 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1159: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP=/lib/cpp
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+ ac_cv_prog_CPP="$CPP"
+fi
+ CPP="$ac_cv_prog_CPP"
+else
+ ac_cv_prog_CPP="$CPP"
+fi
+echo "$ac_t""$CPP" 1>&6
+
+echo $ac_n "checking for AIX""... $ac_c" 1>&6
+echo "configure:1184: checking for AIX" >&5
+cat > conftest.$ac_ext <<EOF
+#line 1186 "configure"
+#include "confdefs.h"
+#ifdef _AIX
+ yes
+#endif
+
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "yes" >/dev/null 2>&1; then
+ rm -rf conftest*
+ echo "$ac_t""yes" 1>&6; cat >> confdefs.h <<\EOF
+#define _ALL_SOURCE 1
+EOF
+
+else
+ rm -rf conftest*
+ echo "$ac_t""no" 1>&6
+fi
+rm -f conftest*
+
+
+echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
+echo "configure:1208: checking for POSIXized ISC" >&5
+if test -d /etc/conf/kconfig.d &&
+ grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
+then
+ echo "$ac_t""yes" 1>&6
+ ISC=yes # If later tests want to check for ISC.
+ cat >> confdefs.h <<\EOF
+#define _POSIX_SOURCE 1
+EOF
+
+ if test "$GCC" = yes; then
+ CC="$CC -posix"
+ else
+ CC="$CC -Xp"
+ fi
+else
+ echo "$ac_t""no" 1>&6
+ ISC=
+fi
+
+ac_safe=`echo "minix/config.h" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for minix/config.h""... $ac_c" 1>&6
+echo "configure:1230: checking for minix/config.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1235 "configure"
+#include "confdefs.h"
+#include <minix/config.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1240: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ MINIX=yes
+else
+ echo "$ac_t""no" 1>&6
+MINIX=
+fi
+
+if test "$MINIX" = yes; then
+ cat >> confdefs.h <<\EOF
+#define _POSIX_SOURCE 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define _POSIX_1_SOURCE 2
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define _MINIX 1
+EOF
+
+fi
+
+
+echo $ac_n "checking for inline""... $ac_c" 1>&6
+echo "configure:1279: checking for inline" >&5
+if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_cv_c_inline=no
+for ac_kw in inline __inline__ __inline; do
+ cat > conftest.$ac_ext <<EOF
+#line 1286 "configure"
+#include "confdefs.h"
+
+int main() {
+} $ac_kw foo() {
+; return 0; }
+EOF
+if { (eval echo configure:1293: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_c_inline=$ac_kw; break
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+done
+
+fi
+
+echo "$ac_t""$ac_cv_c_inline" 1>&6
+case "$ac_cv_c_inline" in
+ inline | yes) ;;
+ no) cat >> confdefs.h <<\EOF
+#define inline
+EOF
+ ;;
+ *) cat >> confdefs.h <<EOF
+#define inline $ac_cv_c_inline
+EOF
+ ;;
+esac
+
+echo $ac_n "checking for working const""... $ac_c" 1>&6
+echo "configure:1319: checking for working const" >&5
+if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1324 "configure"
+#include "confdefs.h"
+
+int main() {
+
+/* Ultrix mips cc rejects this. */
+typedef int charset[2]; const charset x;
+/* SunOS 4.1.1 cc rejects this. */
+char const *const *ccp;
+char **p;
+/* NEC SVR4.0.2 mips cc rejects this. */
+struct point {int x, y;};
+static struct point const zero = {0,0};
+/* AIX XL C 1.02.0.0 rejects this.
+ It does not let you subtract one const X* pointer from another in an arm
+ of an if-expression whose if-part is not a constant expression */
+const char *g = "string";
+ccp = &g + (g ? g-g : 0);
+/* HPUX 7.0 cc rejects these. */
+++ccp;
+p = (char**) ccp;
+ccp = (char const *const *) p;
+{ /* SCO 3.2v4 cc rejects this. */
+ char *t;
+ char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+ *t++ = 0;
+}
+{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
+ int x[] = {25, 17};
+ const int *foo = &x[0];
+ ++foo;
+}
+{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+ typedef const int *iptr;
+ iptr p = 0;
+ ++p;
+}
+{ /* AIX XL C 1.02.0.0 rejects this saying
+ "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+ struct s { int j; const int *ap[3]; };
+ struct s *b; b->j = 5;
+}
+{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+ const int foo = 10;
+}
+
+; return 0; }
+EOF
+if { (eval echo configure:1373: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_c_const=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_c_const=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_c_const" 1>&6
+if test $ac_cv_c_const = no; then
+ cat >> confdefs.h <<\EOF
+#define const
+EOF
+
+fi
+
+echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
+echo "configure:1394: checking for ANSI C header files" >&5
+if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1399 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1407: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ ac_cv_header_stdc=yes
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+cat > conftest.$ac_ext <<EOF
+#line 1424 "configure"
+#include "confdefs.h"
+#include <string.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "memchr" >/dev/null 2>&1; then
+ :
+else
+ rm -rf conftest*
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+cat > conftest.$ac_ext <<EOF
+#line 1442 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "free" >/dev/null 2>&1; then
+ :
+else
+ rm -rf conftest*
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+if test "$cross_compiling" = yes; then
+ :
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1463 "configure"
+#include "confdefs.h"
+#include <ctype.h>
+#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int main () { int i; for (i = 0; i < 256; i++)
+if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
+exit (0); }
+
+EOF
+if { (eval echo configure:1474: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ :
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_header_stdc=no
+fi
+rm -fr conftest*
+fi
+
+fi
+fi
+
+echo "$ac_t""$ac_cv_header_stdc" 1>&6
+if test $ac_cv_header_stdc = yes; then
+ cat >> confdefs.h <<\EOF
+#define STDC_HEADERS 1
+EOF
+
+fi
+
+echo $ac_n "checking for pid_t""... $ac_c" 1>&6
+echo "configure:1498: checking for pid_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1503 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "(^|[^a-zA-Z_0-9])pid_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_type_pid_t=yes
+else
+ rm -rf conftest*
+ ac_cv_type_pid_t=no
+fi
+rm -f conftest*
+
+fi
+echo "$ac_t""$ac_cv_type_pid_t" 1>&6
+if test $ac_cv_type_pid_t = no; then
+ cat >> confdefs.h <<\EOF
+#define pid_t int
+EOF
+
+fi
+
+echo $ac_n "checking for size_t""... $ac_c" 1>&6
+echo "configure:1531: checking for size_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1536 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_type_size_t=yes
+else
+ rm -rf conftest*
+ ac_cv_type_size_t=no
+fi
+rm -f conftest*
+
+fi
+echo "$ac_t""$ac_cv_type_size_t" 1>&6
+if test $ac_cv_type_size_t = no; then
+ cat >> confdefs.h <<\EOF
+#define size_t unsigned
+EOF
+
+fi
+
+echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
+echo "configure:1564: checking return type of signal handlers" >&5
+if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1569 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <signal.h>
+#ifdef signal
+#undef signal
+#endif
+#ifdef __cplusplus
+extern "C" void (*signal (int, void (*)(int)))(int);
+#else
+void (*signal ()) ();
+#endif
+
+int main() {
+int i;
+; return 0; }
+EOF
+if { (eval echo configure:1586: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_type_signal=void
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_type_signal=int
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_type_signal" 1>&6
+cat >> confdefs.h <<EOF
+#define RETSIGTYPE $ac_cv_type_signal
+EOF
+
+
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:1617: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ # Account for people who put trailing slashes in PATH elements.
+ case "$ac_dir/" in
+ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ if test -f $ac_dir/$ac_prog; then
+ if test $ac_prog = install &&
+ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ else
+ ac_cv_path_install="$ac_dir/$ac_prog -c"
+ break 2
+ fi
+ fi
+ done
+ ;;
+ esac
+ done
+ IFS="$ac_save_IFS"
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL="$ac_cv_path_install"
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL="$ac_install_sh"
+ fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
+echo "configure:1670: checking whether ln -s works" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ rm -f conftestdata
+if ln -s X conftestdata 2>/dev/null
+then
+ rm -f conftestdata
+ ac_cv_prog_LN_S="ln -s"
+else
+ ac_cv_prog_LN_S=ln
+fi
+fi
+LN_S="$ac_cv_prog_LN_S"
+if test "$ac_cv_prog_LN_S" = "ln -s"; then
+ echo "$ac_t""yes" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+# Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1693: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+for ac_prog in 'bison -y' byacc
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1725: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$YACC"; then
+ ac_cv_prog_YACC="$YACC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_YACC="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+YACC="$ac_cv_prog_YACC"
+if test -n "$YACC"; then
+ echo "$ac_t""$YACC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$YACC" && break
+done
+test -n "$YACC" || YACC="yacc"
+
+missing_dir=`cd $ac_aux_dir && pwd`
+for ac_prog in flex lex
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1761: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$LEX"; then
+ ac_cv_prog_LEX="$LEX" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_LEX="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+LEX="$ac_cv_prog_LEX"
+if test -n "$LEX"; then
+ echo "$ac_t""$LEX" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$LEX" && break
+done
+test -n "$LEX" || LEX=""$missing_dir/missing flex""
+
+# Extract the first word of "flex", so it can be a program name with args.
+set dummy flex; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1794: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$LEX"; then
+ ac_cv_prog_LEX="$LEX" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_LEX="flex"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_LEX" && ac_cv_prog_LEX="lex"
+fi
+fi
+LEX="$ac_cv_prog_LEX"
+if test -n "$LEX"; then
+ echo "$ac_t""$LEX" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$LEXLIB"
+then
+ case "$LEX" in
+ flex*) ac_lib=fl ;;
+ *) ac_lib=l ;;
+ esac
+ echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
+echo "configure:1828: checking for yywrap in -l$ac_lib" >&5
+ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-l$ac_lib $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 1836 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char yywrap();
+
+int main() {
+yywrap()
+; return 0; }
+EOF
+if { (eval echo configure:1847: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LEXLIB="-l$ac_lib"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+
+echo $ac_n "checking lex output file root""... $ac_c" 1>&6
+echo "configure:1870: checking lex output file root" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # The minimal lex program is just a single line: %%. But some broken lexes
+# (Solaris, I think it was) want two %% lines, so accommodate them.
+echo '%%
+%%' | $LEX
+if test -f lex.yy.c; then
+ ac_cv_prog_lex_root=lex.yy
+elif test -f lexyy.c; then
+ ac_cv_prog_lex_root=lexyy
+else
+ { echo "configure: error: cannot find output from $LEX; giving up" 1>&2; exit 1; }
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_lex_root" 1>&6
+LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
+
+echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
+echo "configure:1891: checking whether yytext is a pointer" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # POSIX says lex can declare yytext either as a pointer or an array; the
+# default is implementation-dependent. Figure out which it is, since
+# not all implementations provide the %pointer and %array declarations.
+ac_cv_prog_lex_yytext_pointer=no
+echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c
+ac_save_LIBS="$LIBS"
+LIBS="$LIBS $LEXLIB"
+cat > conftest.$ac_ext <<EOF
+#line 1903 "configure"
+#include "confdefs.h"
+`cat $LEX_OUTPUT_ROOT.c`
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:1910: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ ac_cv_prog_lex_yytext_pointer=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+rm -f "${LEX_OUTPUT_ROOT}.c"
+
+fi
+
+echo "$ac_t""$ac_cv_prog_lex_yytext_pointer" 1>&6
+if test $ac_cv_prog_lex_yytext_pointer = yes; then
+ cat >> confdefs.h <<\EOF
+#define YYTEXT_POINTER 1
+EOF
+
+fi
+
+
+
+# Check whether --enable-bigendian or --disable-bigendian was given.
+if test "${enable_bigendian+set}" = set; then
+ enableval="$enable_bigendian"
+ openafs_cv_c_bigendian=yes
+fi
+
+# Check whether --enable-littleendian or --disable-littleendian was given.
+if test "${enable_littleendian+set}" = set; then
+ enableval="$enable_littleendian"
+ openafs_cv_c_bigendian=no
+fi
+
+echo $ac_n "checking whether byte order is known at compile time""... $ac_c" 1>&6
+echo "configure:1946: checking whether byte order is known at compile time" >&5
+if eval "test \"`echo '$''{'openafs_cv_c_bigendian_compile'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1951 "configure"
+#include "confdefs.h"
+
+#include <sys/types.h>
+#include <sys/param.h>
+int main() {
+
+#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
+ bogus endian macros
+#endif
+; return 0; }
+EOF
+if { (eval echo configure:1963: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ openafs_cv_c_bigendian_compile=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ openafs_cv_c_bigendian_compile=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$openafs_cv_c_bigendian_compile" 1>&6
+echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
+echo "configure:1977: checking whether byte ordering is bigendian" >&5
+if eval "test \"`echo '$''{'openafs_cv_c_bigendian'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ if test "$openafs_cv_c_bigendian_compile" = "yes"; then
+ cat > conftest.$ac_ext <<EOF
+#line 1984 "configure"
+#include "confdefs.h"
+
+#include <sys/types.h>
+#include <sys/param.h>
+int main() {
+
+#if BYTE_ORDER != BIG_ENDIAN
+ not big endian
+#endif
+; return 0; }
+EOF
+if { (eval echo configure:1996: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ openafs_cv_c_bigendian=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ openafs_cv_c_bigendian=no
+fi
+rm -f conftest*
+ else
+ if test "$cross_compiling" = yes; then
+ { echo "configure: error: specify either --enable-bigendian or --enable-littleendian" 1>&2; exit 1; }
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2011 "configure"
+#include "confdefs.h"
+main () {
+ /* Are we little or big endian? From Harbison&Steele. */
+ union
+ {
+ long l;
+ char c[sizeof (long)];
+ } u;
+ u.l = 1;
+ exit (u.c[sizeof (long) - 1] == 1);
+ }
+EOF
+if { (eval echo configure:2024: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ openafs_cv_c_bigendian=no
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ openafs_cv_c_bigendian=yes
+fi
+rm -fr conftest*
+fi
+
+ fi
+
+fi
+
+echo "$ac_t""$openafs_cv_c_bigendian" 1>&6
+if test "$openafs_cv_c_bigendian" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define WORDS_BIGENDIAN 1
+EOF
+fi
+if test "$openafs_cv_c_bigendian_compile" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define ENDIANESS_IN_SYS_PARAM_H 1
+EOF
+fi
+
+
+echo $ac_n "checking your OS""... $ac_c" 1>&6
+echo "configure:2054: checking your OS" >&5
+system=$host
+case $system in
+ *-linux*)
+ MKAFS_OSTYPE=LINUX
+ if test "x$with_linux_kernel_headers" != "x"; then
+ LINUX_KERNEL_PATH="$with_linux_kernel_headers"
+ else
+ LINUX_KERNEL_PATH="/usr/src/linux"
+ fi
+ if test -f "$with_linux_kernel_headers/include/linux/version.h"; then
+ linux_kvers=`fgrep UTS_RELEASE $with_linux_kernel_headers/include/linux/version.h |awk 'BEGIN { FS="\"" } { print $2 }'`
+ if test "x$linux_kvers" = "x"; then
+ { echo "configure: error: Linux headers lack version definition" 1>&2; exit 1; }
+ exit 1
+ else
+ LINUX_VERSION="$linux_kvers"
+ fi
+ else
+ { echo "configure: error: No linux headers found at $with_linux_kernel_headers" 1>&2; exit 1; }
+ exit 1
+ fi
+ echo "$ac_t""linux" 1>&6
+
+echo $ac_n "checking for i_bytes in struct inode""... $ac_c" 1>&6
+echo "configure:2079: checking for i_bytes in struct inode" >&5
+save_CPPFLAGS="$CPPFLAGS"
+CPPFLAGS="-I${LINUX_KERNEL_PATH}/include -D__KERNEL__ $CPPFLAGS"
+if eval "test \"`echo '$''{'ac_cv_linux_fs_struct_inode_has_i_bytes'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+cat > conftest.$ac_ext <<EOF
+#line 2087 "configure"
+#include "confdefs.h"
+#include <linux/fs.h>
+int main() {
+struct inode _inode;
+printf("%d\n", _inode.i_bytes);
+; return 0; }
+EOF
+if { (eval echo configure:2095: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_linux_fs_struct_inode_has_i_bytes=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_linux_fs_struct_inode_has_i_bytes=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_linux_fs_struct_inode_has_i_bytes" 1>&6
+CPPFLAGS="$save_CPPFLAGS"
+
+echo $ac_n "checking for inode_setattr return type""... $ac_c" 1>&6
+echo "configure:2111: checking for inode_setattr return type" >&5
+save_CPPFLAGS="$CPPFLAGS"
+CPPFLAGS="-I${LINUX_KERNEL_PATH}/include -D__KERNEL__ $CPPFLAGS"
+if eval "test \"`echo '$''{'ac_cv_linux_func_inode_setattr_returns_int'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+cat > conftest.$ac_ext <<EOF
+#line 2119 "configure"
+#include "confdefs.h"
+#include <linux/fs.h>
+int main() {
+struct inode _inode;
+struct iattr _iattr;
+int i;
+i = inode_setattr(&_inode, &_iattr);
+; return 0; }
+EOF
+if { (eval echo configure:2129: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_linux_func_inode_setattr_returns_int=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_linux_func_inode_setattr_returns_int=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_linux_func_inode_setattr_returns_int" 1>&6
+CPPFLAGS="$save_CPPFLAGS"
+ ;;
+ *-solaris*)
+ MKAFS_OSTYPE=SOLARIS
+ echo "$ac_t""sun4" 1>&6
+ ;;
+ *-hpux*)
+ MKAFS_OSTYPE=HPUX
+ echo "$ac_t""hp_ux" 1>&6
+ ;;
+ *-irix*)
+ MKAFS_OSTYPE=IRIX
+ echo "$ac_t""sgi" 1>&6
+ ;;
+ *-aix*)
+ MKAFS_OSTYPE=AIX
+ echo "$ac_t""rs_aix" 1>&6
+ ;;
+ *-osf*)
+ MKAFS_OSTYPE=DUX
+ echo "$ac_t""alpha_dux" 1>&6
+ ;;
+ *-darwin*)
+ MKAFS_OSTYPE=DARWIN
+ echo "$ac_t""ppc_darwin" 1>&6
+ ;;
+ *)
+ echo "$ac_t""$system" 1>&6
+ ;;
+esac
+
+if test "x${MKAFS_OSTYPE}" = "xIRIX"; then
+ echo Skipping library tests because they confuse Irix.
+else
+ for ac_func in socket
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:2179: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2184 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:2207: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+
+ if test "$ac_cv_func_socket" = no; then
+ for lib in socket inet; do
+ if test "$HAVE_SOCKET" != 1; then
+ echo $ac_n "checking for socket in -l$lib""... $ac_c" 1>&6
+echo "configure:2236: checking for socket in -l$lib" >&5
+ac_lib_var=`echo $lib'_'socket | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-l$lib $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2244 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char socket();
+
+int main() {
+socket()
+; return 0; }
+EOF
+if { (eval echo configure:2255: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LIBS="$LIBS -l$lib";HAVE_SOCKET=1;cat >> confdefs.h <<\EOF
+#define HAVE_SOCKET 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ done
+ fi
+
+ for ac_func in connect
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:2285: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2290 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:2313: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+
+ if test "$ac_cv_func_connect" = no; then
+ for lib in nsl; do
+ if test "$HAVE_CONNECT" != 1; then
+ echo $ac_n "checking for connect in -l$lib""... $ac_c" 1>&6
+echo "configure:2342: checking for connect in -l$lib" >&5
+ac_lib_var=`echo $lib'_'connect | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-l$lib $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2350 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char connect();
+
+int main() {
+connect()
+; return 0; }
+EOF
+if { (eval echo configure:2361: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LIBS="$LIBS -l$lib";HAVE_CONNECT=1;cat >> confdefs.h <<\EOF
+#define HAVE_CONNECT 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ done
+ fi
+
+ for ac_func in gethostbyname
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:2391: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2396 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:2419: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+ if test "$ac_cv_func_gethostbyname" = no; then
+ for lib in dns nsl resolv; do
+ if test "$HAVE_GETHOSTBYNAME" != 1; then
+ echo $ac_n "checking for gethostbyname in -l$lib""... $ac_c" 1>&6
+echo "configure:2447: checking for gethostbyname in -l$lib" >&5
+ac_lib_var=`echo $lib'_'gethostbyname | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-l$lib $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2455 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char gethostbyname();
+
+int main() {
+gethostbyname()
+; return 0; }
+EOF
+if { (eval echo configure:2466: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LIBS="$LIBS -l$lib";HAVE_GETHOSTBYNAME=1;cat >> confdefs.h <<\EOF
+#define HAVE_GETHOSTBYNAME 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ done
+ fi
+
+ for ac_func in res_search
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:2496: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2501 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:2524: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+ if test "$ac_cv_func_res_search" = no; then
+ for lib in dns nsl resolv; do
+ if test "$HAVE_RES_SEARCH" != 1; then
+ echo $ac_n "checking for res_search in -l$lib""... $ac_c" 1>&6
+echo "configure:2552: checking for res_search in -l$lib" >&5
+ac_lib_var=`echo $lib'_'res_search | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-l$lib $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2560 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char res_search();
+
+int main() {
+res_search()
+; return 0; }
+EOF
+if { (eval echo configure:2571: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LIBS="$LIBS -l$lib";HAVE_RES_SEARCH=1;cat >> confdefs.h <<\EOF
+#define HAVE_RES_SEARCH 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ done
+ if test "$HAVE_RES_SEARCH" = 1; then
+ LIB_res_search="-l$lib"
+ fi
+ fi
+fi
+
+PTHREAD_LIBS=error
+echo $ac_n "checking for pthread_attr_init in -lpthread""... $ac_c" 1>&6
+echo "configure:2604: checking for pthread_attr_init in -lpthread" >&5
+ac_lib_var=`echo pthread'_'pthread_attr_init | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lpthread $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2612 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char pthread_attr_init();
+
+int main() {
+pthread_attr_init()
+; return 0; }
+EOF
+if { (eval echo configure:2623: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ PTHREAD_LIBS="-lpthread"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test "x$PTHREAD_LIBS" = xerror; then
+ echo $ac_n "checking for pthread_attr_init in -lpthreads""... $ac_c" 1>&6
+echo "configure:2645: checking for pthread_attr_init in -lpthreads" >&5
+ac_lib_var=`echo pthreads'_'pthread_attr_init | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lpthreads $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2653 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char pthread_attr_init();
+
+int main() {
+pthread_attr_init()
+; return 0; }
+EOF
+if { (eval echo configure:2664: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ PTHREAD_LIBS="-lpthreads"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test "x$PTHREAD_LIBS" = xerror; then
+ echo $ac_n "checking for pthread_attr_init in -lc_r""... $ac_c" 1>&6
+echo "configure:2687: checking for pthread_attr_init in -lc_r" >&5
+ac_lib_var=`echo c_r'_'pthread_attr_init | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lc_r $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2695 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char pthread_attr_init();
+
+int main() {
+pthread_attr_init()
+; return 0; }
+EOF
+if { (eval echo configure:2706: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ PTHREAD_LIBS="-lc_r"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test "x$PTHREAD_LIBS" = xerror; then
+ echo $ac_n "checking for pthread_attr_init""... $ac_c" 1>&6
+echo "configure:2729: checking for pthread_attr_init" >&5
+if eval "test \"`echo '$''{'ac_cv_func_pthread_attr_init'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2734 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char pthread_attr_init(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char pthread_attr_init();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_pthread_attr_init) || defined (__stub___pthread_attr_init)
+choke me
+#else
+pthread_attr_init();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:2757: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_pthread_attr_init=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_pthread_attr_init=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'pthread_attr_init`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ PTHREAD_LIBS=""
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test "x$PTHREAD_LIBS" = xerror; then
+ { echo "configure: error: *** Unable to locate working posix thread library ***" 1>&2; exit 1; }
+fi
+
+
+if test "$enable_obsolete" = "yes"; then
+ WITH_OBSOLETE=YES
+fi
+
+if test "$enable_insecure" = "yes"; then
+ WITH_INSECURE=YES
+fi
+
+# Should autocompute a default
+if test "x$with_afs_sysname" != "x"; then
+ AFS_SYSNAME="$with_afs_sysname"
+else
+ { echo "configure: error: An AFS sysname is required" 1>&2; exit 1; }
+ exit 1
+fi
+
+if test "$enable_bos_restricted_mode" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define BOS_RESTRICTED_MODE 1
+EOF
+
+fi
+
+if test "$enable_namei_fileserver" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define AFS_NAMEI_ENV 1
+EOF
+
+fi
+
+if test "$enable_afsdb" = "yes"; then
+ LIB_AFSDB="$LIB_res_search"
+ cat >> confdefs.h <<\EOF
+#define AFS_AFSDB_ENV 1
+EOF
+
+fi
+
+SRCDIR_PARENT=`pwd`
+TOP_SRCDIR="${SRCDIR_PARENT}/src"
+
+echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
+echo "configure:2824: checking for ANSI C header files" >&5
+if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2829 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2837: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ ac_cv_header_stdc=yes
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+cat > conftest.$ac_ext <<EOF
+#line 2854 "configure"
+#include "confdefs.h"
+#include <string.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "memchr" >/dev/null 2>&1; then
+ :
+else
+ rm -rf conftest*
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+cat > conftest.$ac_ext <<EOF
+#line 2872 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "free" >/dev/null 2>&1; then
+ :
+else
+ rm -rf conftest*
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+if test "$cross_compiling" = yes; then
+ :
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2893 "configure"
+#include "confdefs.h"
+#include <ctype.h>
+#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int main () { int i; for (i = 0; i < 256; i++)
+if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
+exit (0); }
+
+EOF
+if { (eval echo configure:2904: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ :
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_header_stdc=no
+fi
+rm -fr conftest*
+fi
+
+fi
+fi
+
+echo "$ac_t""$ac_cv_header_stdc" 1>&6
+if test $ac_cv_header_stdc = yes; then
+ cat >> confdefs.h <<\EOF
+#define STDC_HEADERS 1
+EOF
+
+fi
+
+echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
+echo "configure:2928: checking for sys/wait.h that is POSIX.1 compatible" >&5
+if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2933 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <sys/wait.h>
+#ifndef WEXITSTATUS
+#define WEXITSTATUS(stat_val) ((unsigned)(stat_val) >> 8)
+#endif
+#ifndef WIFEXITED
+#define WIFEXITED(stat_val) (((stat_val) & 255) == 0)
+#endif
+int main() {
+int s;
+wait (&s);
+s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
+; return 0; }
+EOF
+if { (eval echo configure:2949: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_header_sys_wait_h=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_header_sys_wait_h=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_header_sys_wait_h" 1>&6
+if test $ac_cv_header_sys_wait_h = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_SYS_WAIT_H 1
+EOF
+
+fi
+
+ac_header_dirent=no
+for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
+echo "configure:2974: checking for $ac_hdr that defines DIR" >&5
+if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2979 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <$ac_hdr>
+int main() {
+DIR *dirp = 0;
+; return 0; }
+EOF
+if { (eval echo configure:2987: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ eval "ac_cv_header_dirent_$ac_safe=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_dirent_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_dirent_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+ ac_header_dirent=$ac_hdr; break
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
+if test $ac_header_dirent = dirent.h; then
+echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
+echo "configure:3012: checking for opendir in -ldir" >&5
+ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldir $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3020 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char opendir();
+
+int main() {
+opendir()
+; return 0; }
+EOF
+if { (eval echo configure:3031: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LIBS="$LIBS -ldir"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+else
+echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
+echo "configure:3053: checking for opendir in -lx" >&5
+ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lx $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3061 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char opendir();
+
+int main() {
+opendir()
+; return 0; }
+EOF
+if { (eval echo configure:3072: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LIBS="$LIBS -lx"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+
+for ac_hdr in stdlib.h string.h unistd.h fcntl.h sys/time.h sys/file.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:3098: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3103 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:3108: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_hdr in netinet/in.h netdb.h sys/fcntl.h sys/mnttab.h sys/mntent.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:3138: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3143 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:3148: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_hdr in mntent.h sys/vfs.h sys/param.h sys/fs_types.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:3178: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3183 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:3188: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_hdr in sys/mount.h strings.h termios.h signal.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:3218: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3223 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:3228: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_hdr in windows.h malloc.h winsock2.h direct.h io.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:3258: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3263 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:3268: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_hdr in security/pam_modules.h siad.h usersec.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:3298: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3303 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:3308: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+
+for ac_func in utimes random srandom getdtablesize snprintf re_comp re_exec
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:3338: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3343 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3366: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+
+
+
+
+
+
+
+
+
+
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs. It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already. You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ ;;
+ esac >> confcache
+if cmp -s $cache_file confcache; then
+ :
+else
+ if test -w $cache_file; then
+ echo "updating cache $cache_file"
+ cat confcache > $cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
+fi
+
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+
+DEFS=-DHAVE_CONFIG_H
+
+# Without the "./", some shells look in PATH for config.status.
+: ${CONFIG_STATUS=./config.status}
+
+echo creating $CONFIG_STATUS
+rm -f $CONFIG_STATUS
+cat > $CONFIG_STATUS <<EOF
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# $0 $ac_configure_args
+#
+# Compiler output produced by configure, useful for debugging
+# configure, is in ./config.log if it exists.
+
+ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+for ac_option
+do
+ case "\$ac_option" in
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+ exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+ -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+ echo "$CONFIG_STATUS generated by autoconf version 2.13"
+ exit 0 ;;
+ -help | --help | --hel | --he | --h)
+ echo "\$ac_cs_usage"; exit 0 ;;
+ *) echo "\$ac_cs_usage"; exit 1 ;;
+ esac
+done
+
+ac_given_srcdir=$srcdir
+ac_given_INSTALL="$INSTALL"
+
+trap 'rm -fr `echo "\
+Makefile \
+src/config/Makefile.${AFS_SYSNAME} \
+src/libafs/MakefileProto.${MKAFS_OSTYPE} \
+ src/config/afsconfig.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+# Protect against being on the right side of a sed subst in config.status.
+sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+$ac_vpsub
+$extrasub
+s%@SHELL@%$SHELL%g
+s%@CFLAGS@%$CFLAGS%g
+s%@CPPFLAGS@%$CPPFLAGS%g
+s%@CXXFLAGS@%$CXXFLAGS%g
+s%@FFLAGS@%$FFLAGS%g
+s%@DEFS@%$DEFS%g
+s%@LDFLAGS@%$LDFLAGS%g
+s%@LIBS@%$LIBS%g
+s%@exec_prefix@%$exec_prefix%g
+s%@prefix@%$prefix%g
+s%@program_transform_name@%$program_transform_name%g
+s%@bindir@%$bindir%g
+s%@sbindir@%$sbindir%g
+s%@libexecdir@%$libexecdir%g
+s%@datadir@%$datadir%g
+s%@sysconfdir@%$sysconfdir%g
+s%@sharedstatedir@%$sharedstatedir%g
+s%@localstatedir@%$localstatedir%g
+s%@libdir@%$libdir%g
+s%@includedir@%$includedir%g
+s%@oldincludedir@%$oldincludedir%g
+s%@infodir@%$infodir%g
+s%@mandir@%$mandir%g
+s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
+s%@PACKAGE@%$PACKAGE%g
+s%@VERSION@%$VERSION%g
+s%@ACLOCAL@%$ACLOCAL%g
+s%@AUTOCONF@%$AUTOCONF%g
+s%@AUTOMAKE@%$AUTOMAKE%g
+s%@AUTOHEADER@%$AUTOHEADER%g
+s%@MAKEINFO@%$MAKEINFO%g
+s%@SET_MAKE@%$SET_MAKE%g
+s%@host@%$host%g
+s%@host_alias@%$host_alias%g
+s%@host_cpu@%$host_cpu%g
+s%@host_vendor@%$host_vendor%g
+s%@host_os@%$host_os%g
+s%@CC@%$CC%g
+s%@CPP@%$CPP%g
+s%@LN_S@%$LN_S%g
+s%@RANLIB@%$RANLIB%g
+s%@YACC@%$YACC%g
+s%@LEX@%$LEX%g
+s%@LEXLIB@%$LEXLIB%g
+s%@LEX_OUTPUT_ROOT@%$LEX_OUTPUT_ROOT%g
+s%@PTHREAD_LIBS@%$PTHREAD_LIBS%g
+s%@AFS_SYSNAME@%$AFS_SYSNAME%g
+s%@LIB_AFSDB@%$LIB_AFSDB%g
+s%@LINUX_KERNEL_PATH@%$LINUX_KERNEL_PATH%g
+s%@LINUX_VERSION@%$LINUX_VERSION%g
+s%@MKAFS_OSTYPE@%$MKAFS_OSTYPE%g
+s%@TOP_SRCDIR@%$TOP_SRCDIR%g
+s%@WITH_OBSOLETE@%$WITH_OBSOLETE%g
+s%@WITH_INSECURE@%$WITH_INSECURE%g
+
+CEOF
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+ if test $ac_beg -gt 1; then
+ sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+ else
+ sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+ fi
+ if test ! -s conftest.s$ac_file; then
+ ac_more_lines=false
+ rm -f conftest.s$ac_file
+ else
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds="sed -f conftest.s$ac_file"
+ else
+ ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+ fi
+ ac_file=`expr $ac_file + 1`
+ ac_beg=$ac_end
+ ac_end=`expr $ac_end + $ac_max_sed_cmds`
+ fi
+done
+if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds=cat
+fi
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+
+CONFIG_FILES=\${CONFIG_FILES-"\
+Makefile \
+src/config/Makefile.${AFS_SYSNAME} \
+src/libafs/MakefileProto.${MKAFS_OSTYPE} \
+"}
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ case "$ac_file" in
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+ ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+ *) ac_file_in="${ac_file}.in" ;;
+ esac
+
+ # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+
+ # Remove last slash and all that follows it. Not all systems have dirname.
+ ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+ if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+ # The file is in a subdirectory.
+ test ! -d "$ac_dir" && mkdir "$ac_dir"
+ ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+ else
+ ac_dir_suffix= ac_dots=
+ fi
+
+ case "$ac_given_srcdir" in
+ .) srcdir=.
+ if test -z "$ac_dots"; then top_srcdir=.
+ else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+ /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+ *) # Relative path.
+ srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+ top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+
+ case "$ac_given_INSTALL" in
+ [/$]*) INSTALL="$ac_given_INSTALL" ;;
+ *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
+ esac
+
+ echo creating "$ac_file"
+ rm -f "$ac_file"
+ configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+ case "$ac_file" in
+ *Makefile*) ac_comsub="1i\\
+# $configure_input" ;;
+ *) ac_comsub= ;;
+ esac
+
+ ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+ sed -e "$ac_comsub
+s%@configure_input@%$configure_input%g
+s%@srcdir@%$srcdir%g
+s%@top_srcdir@%$top_srcdir%g
+s%@INSTALL@%$INSTALL%g
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+fi; done
+rm -f conftest.s*
+
+# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
+# NAME is the cpp macro being defined and VALUE is the value it is being given.
+#
+# ac_d sets the value in "#define NAME VALUE" lines.
+ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)'
+ac_dB='\([ ][ ]*\)[^ ]*%\1#\2'
+ac_dC='\3'
+ac_dD='%g'
+# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
+ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
+ac_uB='\([ ]\)%\1#\2define\3'
+ac_uC=' '
+ac_uD='\4%g'
+# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
+ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
+ac_eB='$%\1#\2define\3'
+ac_eC=' '
+ac_eD='%g'
+
+if test "${CONFIG_HEADERS+set}" != set; then
+EOF
+cat >> $CONFIG_STATUS <<EOF
+ CONFIG_HEADERS="src/config/afsconfig.h"
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+fi
+for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ case "$ac_file" in
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+ ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+ *) ac_file_in="${ac_file}.in" ;;
+ esac
+
+ echo creating $ac_file
+
+ rm -f conftest.frag conftest.in conftest.out
+ ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+ cat $ac_file_inputs > conftest.in
+
+EOF
+
+# Transform confdefs.h into a sed script conftest.vals that substitutes
+# the proper values into config.h.in to produce config.h. And first:
+# Protect against being on the right side of a sed subst in config.status.
+# Protect against being in an unquoted here document in config.status.
+rm -f conftest.vals
+cat > conftest.hdr <<\EOF
+s/[\\&%]/\\&/g
+s%[\\$`]%\\&%g
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
+s%ac_d%ac_u%gp
+s%ac_u%ac_e%gp
+EOF
+sed -n -f conftest.hdr confdefs.h > conftest.vals
+rm -f conftest.hdr
+
+# This sed command replaces #undef with comments. This is necessary, for
+# example, in the case of _POSIX_SOURCE, which is predefined and required
+# on some systems where configure will not decide to define it.
+cat >> conftest.vals <<\EOF
+s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
+EOF
+
+# Break up conftest.vals because some shells have a limit on
+# the size of here documents, and old seds have small limits too.
+
+rm -f conftest.tail
+while :
+do
+ ac_lines=`grep -c . conftest.vals`
+ # grep -c gives empty output for an empty file on some AIX systems.
+ if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
+ # Write a limited-size here document to conftest.frag.
+ echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
+ sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
+ echo 'CEOF
+ sed -f conftest.frag conftest.in > conftest.out
+ rm -f conftest.in
+ mv conftest.out conftest.in
+' >> $CONFIG_STATUS
+ sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
+ rm -f conftest.vals
+ mv conftest.tail conftest.vals
+done
+rm -f conftest.vals
+
+cat >> $CONFIG_STATUS <<\EOF
+ rm -f conftest.frag conftest.h
+ echo "/* $ac_file. Generated automatically by configure. */" > conftest.h
+ cat conftest.in >> conftest.h
+ rm -f conftest.in
+ if cmp -s $ac_file conftest.h 2>/dev/null; then
+ echo "$ac_file is unchanged"
+ rm -f conftest.h
+ else
+ # Remove last slash and all that follows it. Not all systems have dirname.
+ ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+ if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+ # The file is in a subdirectory.
+ test ! -d "$ac_dir" && mkdir "$ac_dir"
+ fi
+ rm -f $ac_file
+ mv conftest.h $ac_file
+ fi
+fi; done
+
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+
+exit 0
+EOF
+chmod +x $CONFIG_STATUS
+rm -fr confdefs* $ac_clean_files
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
--- /dev/null
+AC_INIT(src/config/stds.h)
+AM_INIT_AUTOMAKE(openafs,devel)
+AC_CANONICAL_HOST
+AC_CONFIG_HEADER(src/config/afsconfig.h)
+
+#BOZO_SAVE_CORES BOS_RESTRICTED_MODE BOS_NEW_CONFIG pam sia BITMAP_LATER FAST_RESTART
+AC_ARG_WITH(afs-sysname,
+[ --with-afs-sysname=sys use sys for the afs sysname]
+)
+AC_ARG_ENABLE( obsolete,
+[ --enable-obsolete enable obsolete portions of AFS (mpp, ntp and package)],, enable_obsolete="no")
+AC_ARG_ENABLE( insecure,
+[ --enable-insecure enable insecure portions of AFS (ftpd, inetd, rcp, rlogind and rsh)],, enable_insecure="no")
+AC_ARG_ENABLE( afsdb,
+[ --disable-afsdb disable AFSDB RR support],, enable_afsdb="yes")
+AC_ARG_ENABLE( bos-restricted-mode,
+[ --enable-bos-restricted-mode enable bosserver restricted mode which disables certain bosserver functionality],, enable_bos_restricted_mode="no")
+AC_ARG_ENABLE( namei-fileserver,
+[ --enable-namei-fileserver force compilation of namei fileserver in preference to inode fileserver],, enable_namei_fileserver="no")
+AC_ARG_WITH(linux-kernel-headers,
+[ --with-linux-kernel-headers=path use the kernel headers found at path(optional, defaults to /usr/src/linux)]
+)
+
+AC_PROG_CC
+
+dnl weird ass systems
+AC_AIX
+AC_ISC_POSIX
+AC_MINIX
+
+dnl Various compiler setup.
+AC_C_INLINE
+AC_C_CONST
+AC_TYPE_PID_T
+AC_TYPE_SIZE_T
+AC_TYPE_SIGNAL
+
+dnl Checks for programs.
+AC_PROG_INSTALL
+AC_PROG_LN_S
+AC_PROG_RANLIB
+AC_PROG_YACC
+AM_PROG_LEX
+
+OPENAFS_CHECK_BIGENDIAN
+
+AC_MSG_CHECKING(your OS)
+system=$host
+case $system in
+ *-linux*)
+ MKAFS_OSTYPE=LINUX
+ if test "x$with_linux_kernel_headers" != "x"; then
+ LINUX_KERNEL_PATH="$with_linux_kernel_headers"
+ else
+ LINUX_KERNEL_PATH="/usr/src/linux"
+ fi
+ if test -f "$with_linux_kernel_headers/include/linux/version.h"; then
+ linux_kvers=`fgrep UTS_RELEASE $with_linux_kernel_headers/include/linux/version.h |awk 'BEGIN { FS="\"" } { print $2 }'`
+ if test "x$linux_kvers" = "x"; then
+ AC_MSG_ERROR(Linux headers lack version definition)
+ exit 1
+ else
+ LINUX_VERSION="$linux_kvers"
+ fi
+ else
+ AC_MSG_ERROR(No linux headers found at $with_linux_kernel_headers)
+ exit 1
+ fi
+ AC_MSG_RESULT(linux)
+ LINUX_FS_STRUCT_INODE_HAS_I_BYTES
+ LINUX_INODE_SETATTR_RETURN_TYPE
+ ;;
+ *-solaris*)
+ MKAFS_OSTYPE=SOLARIS
+ AC_MSG_RESULT(sun4)
+ ;;
+ *-hpux*)
+ MKAFS_OSTYPE=HPUX
+ AC_MSG_RESULT(hp_ux)
+ ;;
+ *-irix*)
+ MKAFS_OSTYPE=IRIX
+ AC_MSG_RESULT(sgi)
+ ;;
+ *-aix*)
+ MKAFS_OSTYPE=AIX
+ AC_MSG_RESULT(rs_aix)
+ ;;
+ *-osf*)
+ MKAFS_OSTYPE=DUX
+ AC_MSG_RESULT(alpha_dux)
+ ;;
+ *-darwin*)
+ MKAFS_OSTYPE=DARWIN
+ AC_MSG_RESULT(ppc_darwin)
+ ;;
+ *)
+ AC_MSG_RESULT($system)
+ ;;
+esac
+
+if test "x${MKAFS_OSTYPE}" = "xIRIX"; then
+ echo Skipping library tests because they confuse Irix.
+else
+ AC_CHECK_FUNCS(socket)
+
+ if test "$ac_cv_func_socket" = no; then
+ for lib in socket inet; do
+ if test "$HAVE_SOCKET" != 1; then
+ AC_CHECK_LIB($lib, socket,LIBS="$LIBS -l$lib";HAVE_SOCKET=1;AC_DEFINE(HAVE_SOCKET))
+ fi
+ done
+ fi
+
+ AC_CHECK_FUNCS(connect)
+
+ if test "$ac_cv_func_connect" = no; then
+ for lib in nsl; do
+ if test "$HAVE_CONNECT" != 1; then
+ AC_CHECK_LIB($lib, connect,LIBS="$LIBS -l$lib";HAVE_CONNECT=1;AC_DEFINE(HAVE_CONNECT))
+ fi
+ done
+ fi
+
+ AC_CHECK_FUNCS(gethostbyname)
+ if test "$ac_cv_func_gethostbyname" = no; then
+ for lib in dns nsl resolv; do
+ if test "$HAVE_GETHOSTBYNAME" != 1; then
+ AC_CHECK_LIB($lib, gethostbyname, LIBS="$LIBS -l$lib";HAVE_GETHOSTBYNAME=1;AC_DEFINE(HAVE_GETHOSTBYNAME))
+ fi
+ done
+ fi
+
+ AC_CHECK_FUNCS(res_search)
+ if test "$ac_cv_func_res_search" = no; then
+ for lib in dns nsl resolv; do
+ if test "$HAVE_RES_SEARCH" != 1; then
+ AC_CHECK_LIB($lib, res_search, LIBS="$LIBS -l$lib";HAVE_RES_SEARCH=1;AC_DEFINE(HAVE_RES_SEARCH))
+ fi
+ done
+ if test "$HAVE_RES_SEARCH" = 1; then
+ LIB_res_search="-l$lib"
+ fi
+ fi
+fi
+
+PTHREAD_LIBS=error
+AC_CHECK_LIB(pthread, pthread_attr_init,
+ PTHREAD_LIBS="-lpthread")
+if test "x$PTHREAD_LIBS" = xerror; then
+ AC_CHECK_LIB(pthreads, pthread_attr_init,
+ PTHREAD_LIBS="-lpthreads")
+fi
+if test "x$PTHREAD_LIBS" = xerror; then
+ AC_CHECK_LIB(c_r, pthread_attr_init,
+ PTHREAD_LIBS="-lc_r")
+fi
+if test "x$PTHREAD_LIBS" = xerror; then
+ AC_CHECK_FUNC(pthread_attr_init, PTHREAD_LIBS="")
+fi
+if test "x$PTHREAD_LIBS" = xerror; then
+ AC_MSG_ERROR(*** Unable to locate working posix thread library ***)
+fi
+AC_SUBST(PTHREAD_LIBS)
+
+if test "$enable_obsolete" = "yes"; then
+ WITH_OBSOLETE=YES
+fi
+
+if test "$enable_insecure" = "yes"; then
+ WITH_INSECURE=YES
+fi
+
+# Should autocompute a default
+if test "x$with_afs_sysname" != "x"; then
+ AFS_SYSNAME="$with_afs_sysname"
+else
+ AC_MSG_ERROR(An AFS sysname is required)
+ exit 1
+fi
+
+if test "$enable_bos_restricted_mode" = "yes"; then
+ AC_DEFINE(BOS_RESTRICTED_MODE)
+fi
+
+if test "$enable_namei_fileserver" = "yes"; then
+ AC_DEFINE(AFS_NAMEI_ENV)
+fi
+
+if test "$enable_afsdb" = "yes"; then
+ LIB_AFSDB="$LIB_res_search"
+ AC_DEFINE(AFS_AFSDB_ENV)
+fi
+
+SRCDIR_PARENT=`pwd`
+TOP_SRCDIR="${SRCDIR_PARENT}/src"
+
+dnl checks for header files.
+AC_HEADER_STDC
+AC_HEADER_SYS_WAIT
+AC_HEADER_DIRENT
+AC_CHECK_HEADERS(stdlib.h string.h unistd.h fcntl.h sys/time.h sys/file.h)
+AC_CHECK_HEADERS(netinet/in.h netdb.h sys/fcntl.h sys/mnttab.h sys/mntent.h)
+AC_CHECK_HEADERS(mntent.h sys/vfs.h sys/param.h sys/fs_types.h)
+AC_CHECK_HEADERS(sys/mount.h strings.h termios.h signal.h)
+AC_CHECK_HEADERS(windows.h malloc.h winsock2.h direct.h io.h)
+AC_CHECK_HEADERS(security/pam_modules.h siad.h usersec.h)
+
+AC_CHECK_FUNCS(utimes random srandom getdtablesize snprintf re_comp re_exec)
+
+AC_SUBST(AFS_SYSNAME)
+AC_SUBST(LIB_AFSDB)
+AC_SUBST(LINUX_KERNEL_PATH)
+AC_SUBST(LINUX_VERSION)
+AC_SUBST(MKAFS_OSTYPE)
+AC_SUBST(TOP_SRCDIR)
+AC_SUBST(WITH_OBSOLETE)
+AC_SUBST(WITH_INSECURE)
+
+AC_OUTPUT( \
+Makefile \
+src/config/Makefile.${AFS_SYSNAME} \
+src/libafs/MakefileProto.${MKAFS_OSTYPE} \
+)
--- /dev/null
+#! /bin/sh
+#
+# install - install a program, script, or datafile
+# This comes from X11R5.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+#
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+tranformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+ case $1 in
+ -c) instcmd="$cpprog"
+ shift
+ continue;;
+
+ -d) dir_arg=true
+ shift
+ continue;;
+
+ -m) chmodcmd="$chmodprog $2"
+ shift
+ shift
+ continue;;
+
+ -o) chowncmd="$chownprog $2"
+ shift
+ shift
+ continue;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift
+ shift
+ continue;;
+
+ -s) stripcmd="$stripprog"
+ shift
+ continue;;
+
+ -t=*) transformarg=`echo $1 | sed 's/-t=//'`
+ shift
+ continue;;
+
+ -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+ shift
+ continue;;
+
+ *) if [ x"$src" = x ]
+ then
+ src=$1
+ else
+ # this colon is to work around a 386BSD /bin/sh bug
+ :
+ dst=$1
+ fi
+ shift
+ continue;;
+ esac
+done
+
+if [ x"$src" = x ]
+then
+ echo "install: no input file specified"
+ exit 1
+else
+ true
+fi
+
+if [ x"$dir_arg" != x ]; then
+ dst=$src
+ src=""
+
+ if [ -d $dst ]; then
+ instcmd=:
+ else
+ instcmd=mkdir
+ fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad
+# if $src (and thus $dsttmp) contains '*'.
+
+ if [ -f $src -o -d $src ]
+ then
+ true
+ else
+ echo "install: $src does not exist"
+ exit 1
+ fi
+
+ if [ x"$dst" = x ]
+ then
+ echo "install: no destination specified"
+ exit 1
+ else
+ true
+ fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+ if [ -d $dst ]
+ then
+ dst="$dst"/`basename $src`
+ else
+ true
+ fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+# this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='
+'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+ pathcomp="${pathcomp}${1}"
+ shift
+
+ if [ ! -d "${pathcomp}" ] ;
+ then
+ $mkdirprog "${pathcomp}"
+ else
+ true
+ fi
+
+ pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+ $doit $instcmd $dst &&
+
+ if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
+ if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+ if [ x"$transformarg" = x ]
+ then
+ dstfile=`basename $dst`
+ else
+ dstfile=`basename $dst $transformbasename |
+ sed $transformarg`$transformbasename
+ fi
+
+# don't allow the sed command to completely eliminate the filename
+
+ if [ x"$dstfile" = x ]
+ then
+ dstfile=`basename $dst`
+ else
+ true
+ fi
+
+# Make a temp file name in the proper directory.
+
+ dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+ $doit $instcmd $src $dsttmp &&
+
+ trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing. If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+ if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
+ if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+
+# Now rename the file to the real destination.
+
+ $doit $rmcmd -f $dstdir/$dstfile &&
+ $doit $mvcmd $dsttmp $dstdir/$dstfile
+
+fi &&
+
+
+exit 0
--- /dev/null
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+# Copyright (C) 1996, 1997, 1999, 2000 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+if test $# -eq 0; then
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+fi
+
+run=:
+
+case "$1" in
+--run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
+ ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
+ --run try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+ aclocal touch file \`aclocal.m4'
+ autoconf touch file \`configure'
+ autoheader touch file \`config.h.in'
+ automake touch all \`Makefile.in' files
+ bison create \`y.tab.[ch]', if possible, from existing .[ch]
+ flex create \`lex.yy.c', if possible, from existing .c
+ help2man touch the output file
+ lex create \`lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+ tar try tar, gnutar, gtar, then tar without non-portable flags
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing 0.3 - GNU automake"
+ ;;
+
+ -*)
+ echo 1>&2 "$0: Unknown \`$1' option"
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+ ;;
+
+ aclocal)
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified \`acinclude.m4' or \`configure.in'. You might want
+ to install the \`Automake' and \`Perl' packages. Grab them from
+ any GNU archive site."
+ touch aclocal.m4
+ ;;
+
+ autoconf)
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified \`configure.in'. You might want to install the
+ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+ archive site."
+ touch configure
+ ;;
+
+ autoheader)
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified \`acconfig.h' or \`configure.in'. You might want
+ to install the \`Autoconf' and \`GNU m4' packages. Grab them
+ from any GNU archive site."
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' configure.in`
+ test -z "$files" && files="config.h"
+ touch_files=
+ for f in $files; do
+ case "$f" in
+ *:*) touch_files="$touch_files "`echo "$f" |
+ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+ *) touch_files="$touch_files $f.in";;
+ esac
+ done
+ touch $touch_files
+ ;;
+
+ automake)
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'.
+ You might want to install the \`Automake' and \`Perl' packages.
+ Grab them from any GNU archive site."
+ find . -type f -name Makefile.am -print |
+ sed 's/\.am$/.in/' |
+ while read f; do touch "$f"; done
+ ;;
+
+ bison|yacc)
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified a \`.y' file. You may need the \`Bison' package
+ in order for those modifications to take effect. You can get
+ \`Bison' from any GNU archive site."
+ rm -f y.tab.c y.tab.h
+ if [ $# -ne 1 ]; then
+ eval LASTARG="\${$#}"
+ case "$LASTARG" in
+ *.y)
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" y.tab.c
+ fi
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" y.tab.h
+ fi
+ ;;
+ esac
+ fi
+ if [ ! -f y.tab.h ]; then
+ echo >y.tab.h
+ fi
+ if [ ! -f y.tab.c ]; then
+ echo 'main() { return 0; }' >y.tab.c
+ fi
+ ;;
+
+ lex|flex)
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified a \`.l' file. You may need the \`Flex' package
+ in order for those modifications to take effect. You can get
+ \`Flex' from any GNU archive site."
+ rm -f lex.yy.c
+ if [ $# -ne 1 ]; then
+ eval LASTARG="\${$#}"
+ case "$LASTARG" in
+ *.l)
+ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" lex.yy.c
+ fi
+ ;;
+ esac
+ fi
+ if [ ! -f lex.yy.c ]; then
+ echo 'main() { return 0; }' >lex.yy.c
+ fi
+ ;;
+
+ help2man)
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified a dependency of a manual page. You may need the
+ \`Help2man' package in order for those modifications to take
+ effect. You can get \`Help2man' from any GNU archive site."
+
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+ fi
+ if [ -f "$file" ]; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo ".ab help2man is required to generate this page"
+ exit 1
+ fi
+ ;;
+
+ makeinfo)
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified a \`.texi' or \`.texinfo' file, or any other file
+ indirectly affecting the aspect of the manual. The spurious
+ call might also be the consequence of using a buggy \`make' (AIX,
+ DU, IRIX). You might want to install the \`Texinfo' package or
+ the \`GNU make' package. Grab either from any GNU archive site."
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+ fi
+ touch $file
+ ;;
+
+ tar)
+ shift
+ if test -n "$run"; then
+ echo 1>&2 "ERROR: \`tar' requires --run"
+ exit 1
+ fi
+
+ # We have already tried tar in the generic part.
+ # Look for gnutar/gtar before invocation to avoid ugly error
+ # messages.
+ if (gnutar --version > /dev/null 2>&1); then
+ gnutar ${1+"$@"} && exit 0
+ fi
+ if (gtar --version > /dev/null 2>&1); then
+ gtar ${1+"$@"} && exit 0
+ fi
+ firstarg="$1"
+ if shift; then
+ case "$firstarg" in
+ *o*)
+ firstarg=`echo "$firstarg" | sed s/o//`
+ tar "$firstarg" ${1+"$@"} && exit 0
+ ;;
+ esac
+ case "$firstarg" in
+ *h*)
+ firstarg=`echo "$firstarg" | sed s/h//`
+ tar "$firstarg" ${1+"$@"} && exit 0
+ ;;
+ esac
+ fi
+
+ echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+ You may want to install GNU tar or Free paxutils, or check the
+ command line arguments."
+ exit 1
+ ;;
+
+ *)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+ system. You might have modified some files without having the
+ proper tools for further handling them. Check the \`README' file,
+ it often tells you about the needed prerequirements for installing
+ this package. You may also peek at any GNU archive site, in case
+ some other package would contain this missing \`$1' program."
+ exit 1
+ ;;
+esac
+
+exit 0
+echo "Updating configuration..."
echo "Running aclocal"
-aclocal -I cf
+aclocal -I src/cf
echo "Running autoconf"
autoconf
echo "Running autoheader"
autoheader
-echo "Running automake"
-automake
+#echo "Running automake"
+#automake
be able to use kgcc to compile all of AFS. Just add CC=kgcc
to your make arguments.
- When building for kernels other than the stock kernel you
- may need to create symlinks in /usr/src named for your
- configuration, e.g. linux-2.2.16-22smp pointing to your
- source tree (linux-2.2.16-22); Redhat provides a unified
- source tree with a switch in include/linux/version.h.
+ When building for multiple kernels in one dest tree,
+ if the kernel version string which UTS_RELEASE is defined to in
+ include/linux/version.h matches the last kernel you built for,
+ the previous kernel module will be overwritten.
+
+Redhat 7.1 (i386_linux24):
+ src/venus/kdump.c may fail to compile.
+
+ You will need pam-devel installed to compile the included
+ PAM module.
+
+ When building for multiple kernels in one dest tree,
+ if the kernel version string which UTS_RELEASE is defined to in
+ include/linux/version.h matches the last kernel you built for,
+ the previous kernel module will be overwritten.
HPUX 11.0 (hp_ux110):
Does not currently build libafs, which means no afs client support,
--- /dev/null
+Basic Installation
+==================
+
+ These are generic installation instructions.
+
+ The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation. It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions. Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, a file
+`config.cache' that saves the results of its tests to speed up
+reconfiguring, and a file `config.log' containing compiler output
+(useful mainly for debugging `configure').
+
+ If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release. If at some point `config.cache'
+contains results you don't want to keep, you may remove or edit it.
+
+ The file `configure.in' is used to create `configure' by a program
+called `autoconf'. You only need `configure.in' if you want to change
+it or regenerate `configure' using a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+ 1. `cd' to the directory containing the package's source code and type
+ `./configure' to configure the package for your system. If you're
+ using `csh' on an old version of System V, you might need to type
+ `sh ./configure' instead to prevent `csh' from trying to execute
+ `configure' itself.
+
+ Running `configure' takes awhile. While running, it prints some
+ messages telling which features it is checking for.
+
+ 2. Type `make' to compile the package.
+
+ 3. Optionally, type `make check' to run any self-tests that come with
+ the package.
+
+ 4. Type `make install' to install the programs and any data files and
+ documentation.
+
+ 5. You can remove the program binaries and object files from the
+ source code directory by typing `make clean'. To also remove the
+ files that `configure' created (so you can compile the package for
+ a different kind of computer), type `make distclean'. There is
+ also a `make maintainer-clean' target, but that is intended mainly
+ for the package's developers. If you use it, you may have to get
+ all sorts of other programs in order to regenerate files that came
+ with the distribution.
+
+Compilers and Options
+=====================
+
+ Some systems require unusual options for compilation or linking that
+the `configure' script does not know about. You can give `configure'
+initial values for variables by setting them in the environment. Using
+a Bourne-compatible shell, you can do that on the command line like
+this:
+ CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+
+Or on systems that have the `env' program, you can do it like this:
+ env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+
+Compiling For Multiple Architectures
+====================================
+
+ You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory. To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'. `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script. `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+ If you have to use a `make' that does not supports the `VPATH'
+variable, you have to compile the package for one architecture at a time
+in the source code directory. After you have installed the package for
+one architecture, use `make distclean' before reconfiguring for another
+architecture.
+
+Installation Names
+==================
+
+ By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc. You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
+
+ You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. If you
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+ In addition, if you use an unusual directory layout you can give
+options like `--bindir=PATH' to specify different values for particular
+kinds of files. Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+ If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+ Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System). The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+ For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+ There may be some features `configure' can not figure out
+automatically, but needs to determine by the type of host the package
+will run on. Usually `configure' can figure that out, but if it prints
+a message saying it can not guess the host type, give it the
+`--host=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name with three fields:
+ CPU-COMPANY-SYSTEM
+
+See the file `config.sub' for the possible values of each field. If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the host type.
+
+ If you are building compiler tools for cross-compiling, you can also
+use the `--target=TYPE' option to select the type of system they will
+produce code for and the `--build=TYPE' option to select the type of
+system on which you are compiling the package.
+
+Sharing Defaults
+================
+
+ If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists. Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Operation Controls
+==================
+
+ `configure' recognizes the following options to control how it
+operates.
+
+`--cache-file=FILE'
+ Use and save the results of the tests in FILE instead of
+ `./config.cache'. Set FILE to `/dev/null' to disable caching, for
+ debugging `configure'.
+
+`--help'
+ Print a summary of the options to `configure', and exit.
+
+`--quiet'
+`--silent'
+`-q'
+ Do not print messages saying which checks are being made. To
+ suppress all normal output, redirect it to `/dev/null' (any error
+ messages will still be shown).
+
+`--srcdir=DIR'
+ Look for the package's source code in directory DIR. Usually
+ `configure' can determine that directory automatically.
+
+`--version'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
+`configure' also accepts some other, not widely useful, options.
+
in afs space is also valid. In the directory that you uncompressed the
source in, you will only have an src/ directory.
- 1. Make a directory for each system type that you plan on
- building. Current tested system types include the following
- (this step is skipped for the i386_nt40 system type):
-
- alpha_dux40/
- alpha_dux50/ (only tested on 5.0A)
- i386_linux22/
- i386_linux24/ (only tested with 2.4.0 kernel)
- rs_aix42/
- sgi_65/ (file server not tested)
- sun4x_56/
- sun4x_57/
- sun4x_58/
- ppc_darwin_13/
- alpha_linux_2216_22/ (DES does not work, will require one more change to
+ 1. Pick a system to build for, and note its default AFS sys_name.
+ A directory will be automatically created for binaries to be written
+ into with this name when you build.
+
+ alpha_dux40
+ alpha_dux50 (only tested on 5.0A)
+ i386_linux22
+ i386_linux24 (only tested with 2.4.0 kernel)
+ rs_aix42
+ sgi_65 (file server not tested)
+ sun4x_56
+ sun4x_57
+ sun4x_58
+ ppc_darwin_13
+ alpha_linux_22 (DES does not work, will require one more change to
compile)
- hp_ux110/ (No client support, but db servers and utilities work)
- hp_ux102/ (No client support, but db servers and utilities work)
-
- Example:
- % mkdir i386_linux22
- % ls -CF
- i386_linux22/ src/
-
- 2. Within each of those directories, create a dest/ and obj/ directory.
-
- Example:
- % mkdir i386_linux22/dest
- % mkdir i386_linux22/obj
-
- 3. Create symbolic links to the system type you are about to build
- a. If the source is in AFS space
-
- Example:
- % ln -s @sys/dest dest
- % ln -s @sys/obj obj
- % ls -CF
- dest@ i386_linux22/ obj@ src/
-
- Within AFS space, the AFS Cache Manager automatically
- substitutes the local machine's AFS system name (CPU/operating
- system type [ie: alpha_dux40, i386_linux22, ...]) for the @sys
- variable.
-
- b. If this source is NOT in AFS space, You must make a link from
- @sys to your current system type.
-
- Example:
- % ln -s i386_linux22 @sys
- % ln -s @sys/dest dest
- % ln -s @sys/obj obj
- % ls -CF
- dest@ i386_linux22/ obj@ src/ sys@
-
- 5. Create the top level Makefile:
-
- Example:
- % ln -s src/Makefile Makefile
- % ls -CF
- Makefile@ dest@ i386_linux22/ obj@ src/
+ hp_ux110 (No client support, but db servers and utilities work)
+ hp_ux102 (No client support, but db servers and utilities work)
+
+ 2. Using configure in the top level directory, configure for your
+ AFS system type, providing the necessary flags:
+ % ./configure --with-afs-sysname=sun4x_58
+
+ For Linux systems you need also provide the patch in which your
+ kernel headers for your configured kernel can be found. This should
+ be the path of the directory containing a child directory named
+ "include". So if your version file was
+ /usr/src/linux/include/linux/version.h you would invoke:
+ % ./configure --with-afs-sysname=i386_linux24 --with-linux-kernel-headers=/usr/src/linux
+
+ Currently you can build for only one Linux kernel at a time,
+ and the version is extracted from the kernel headers in the root
+ you specify.
+
+ Be prepared to provide the switches --enable-obsolete and
+ --enable-insecure if you require the use of any bundled but obsolete
+ or insecure software included with OpenAFS. See README.obsolete and
+ README.insecure for more details.
B Building
- 1. Make the obj links. This creates links from the @sys/obj/ tree
- back to the source tree. The source tree remains unchanged and
- builds are done in the platform specific object tree.
+ 1. Now, you can build OpenAFS.
- % make links
+ % make
- 2. Begin building
- a. For Linux
- % make SYS_NAME="i386_linux22" LINUX_VERS="2.2.14"
+ When the build completes, you will have a complete binary tree
+ in the dest directory under the directory named for the sys_name you
+ built for, e.g. sun4x_57/dest or i386_linux22/dest
- b. For UNIX versions, specify the system name as given by
- the system type defined in step A1.
- % make SYS_NAME="<system_name>"
+ 2. As appropriate you can clean up or, if you're using Linux, build for
+ another kernel version:
+ a. To clean up:
+ % make clean
- Example for the rs_aix42 operating system:
- % make SYS_NAME="rs_aix42"
+ b. To build for another Linux kernel version:
+ the system type defined in step A1.
+ % ./configure --with-afs-sysname=i386_linux22 --with-linux-kernel-headers=/usr/src/linux-2.2.19-i686
+ % make
+
+ Your dest tree will now include an additional kernel module for your
+ additional kernel headers. Be aware that if the kernel version string
+ which UTS_RELEASE is defined to in include/linux/version.h matches
+ the last kernel you built for, the previous kernel module will be
+ overwritten.
C Problems
If you have a problem building this source, you may want to visit
and occasionally develop them, and current versions can be found at:
ftp://ftp.andrew.cmu.edu/pub/AFS-Tools
-To disable building of the obsolete code included with OpenAFS, set the
-WITH_OBSOLETE flag in the makefile to NO.
+To enable building of the obsolete code included with OpenAFS,
+run configure with the --enable-obsolete switch
In any case, carefully consider the security implications before deploying
these utilities.
-To disable building of the insecure code included with OpenAFS, set the
-WITH_INSECURE flag in the makefile to NO.
+To enable building of the insecure code included with OpenAFS, run
+configure with the --enable-insecure switch.
+
+++ /dev/null
-#undef HAVE_CONNECT
-#undef HAVE_GETHOSTBYNAME
-#undef HAVE_SOCKET
esac
clean:
- echo Nothing to delete.
+ rm -f *.o core AFS_component_version_number.c afs_trace.h afs_trace.msf afszcm.cat
#endif
#endif /* AFS_USR_DARWIN_ENV || AFS_USR_FBSD_ENV */
+#ifdef AFS_AFSDB_ENV
+#include <arpa/nameser.h>
+#include <resolv.h>
+#endif /* AFS_AFSDB_ENV */
+
/* glibc 2.2 has pthread_attr_setstacksize */
#if defined(AFS_LINUX22_ENV) || defined(AFS_USR_LINUX22_ENV) && (__GLIBC_MINOR__ < 2)
#define pthread_attr_setstacksize(a,b) 0
+++ /dev/null
-/*
- * This is a template config.h.in, it is not truly a config.h.in at the moment
- * but will be converted to one during autoconf switch. The defines below
- * are all static and hardcoded purely to aid in the cleanup and migration
- * process.
- *
- */
-
-#ifndef AFSCONFIG_H
-#define AFSCONFIG_H
-
-#define HAVE_STDLIB_H
-#define HAVE_STRING_H
-
-#ifdef AFS_NT40_ENV
-#define HAVE_WINDOWS_H
-#define HAVE_MALLOC_H
-#define HAVE_WINSOCK2_H
-#define HAVE_DIRECT_H
-#define HAVE_IO_H
-#endif
-
-#ifndef AFS_NT40_ENV
-#define HAVE_UNISTD_H
-#define HAVE_FCNTL_H
-#define HAVE_SYS_TIME_H
-#define HAVE_SYS_FILE_H
-#define HAVE_NETINET_IN_H
-#define HAVE_NETDB_H
-#endif
-
-#ifdef AFS_SUN5_ENV
-#define HAVE_SYS_FCNTL_H
-#define HAVE_SYS_MNTTAB_H
-#define HAVE_SYS_MNTENT_H
-#endif
-
-#if defined(AFS_SGI_ENV) || defined(AFS_HPUX_ENV) || defined(AFS_LINUX20_ENV) || (defined(AFS_SUN_ENV) && !defined(AFS_SUN5_ENV))
-#define HAVE_MNTENT_H
-#endif
-
-#if !defined(AFS_OSF_ENV) && !defined(AFS_DEC_ENV) && !defined(AFS_DARWIN_ENV) && !defined(AFS_FBSD_ENV)
-#define HAVE_SYS_VFS_H
-#endif
-
-#ifdef AFS_DEC_ENV
-#define HAVE_SYS_PARAM_H
-#define HAVE_SYS_FS_TYPES_H
-#endif
-
-#if !defined(AFS_AIX41_ENV)
-#define HAVE_SYS_MOUNT_H
-#endif
-
-#if defined(AFS_SUN5_ENV) || defined(AFS_SGI_ENV) || defined(AFS_LINUX22_ENV)
-#define HAVE_STRINGS_H
-#define HAVE_STRING_H
-#else
-#define HAVE_STRING_H
-#endif
-
-#if defined(AFS_SUN_ENV) && !defined(AFS_SUN5_ENV)
-#define HAVE_TERMIOS_H
-#elif defined(AFS_DARWIN_ENV) || defined(AFS_FBSD_ENV)
-#define HAVE_TERMIOS_H
-#endif
-
-#if defined(AFS_SGI_ENV) || defined(AFS_LINUX20_ENV) || defined(AFS_DARWIN_ENV) || defined(AFS_FBSD_ENV)
-#define HAVE_SIGNAL_H
-#endif
-
-#ifndef RCSID
-#define RCSID(msg) static /**/const char *const rcsid[] = { (const char *)rcsid, "\100(#)" msg }
-#endif
-
-#endif /* AFSCONFIG_H */
${CC} ${CFLAGS} -c audit.c
clean:
- rm -f *.o core AFS_component_version_number.c
+ rm -f *.o core AFS_component_version_number.c *.a
beancount:
wc -l *.c *.h
*/
#include <afs/param.h>
+#include <afsconfig.h>
#include <afs/stds.h>
#include <afs/pthread_glock.h>
#ifdef UKERNEL
${INSTALL} bnode.h ${DESTDIR}include/afs/bnode.h
clean:
- rm -f *.a *.o bos bosserver testproc bosint.cs.c bosint.ss.c bosint.xdr.c bosint.h core\
+ rm -f *.a *.o bos bosserver testproc bosint.cs.c bosint.ss.c bosint.xdr.c bosint.h core boserr.c bnode.h\
AFS_component_version_number.c
test:
${INSTALL} backup ${DESTDIR}etc
clean:
- rm -f *.o backup convert *.ss.c *.cs.c *.xdr.c *.a core btest ttest AFS_component_version_number.c
+ rm -f *.o backup convert *.ss.c *.cs.c *.xdr.c *.a core btest ttest AFS_component_version_number.c bc.h bucoord_errs.c
lint:
lint -IDEST/include -IDEST/include/afs *.h *.c
--- /dev/null
+dnl
+dnl $Id$
+dnl
+
+dnl check if this computer is little or big-endian
+dnl if we can figure it out at compile-time then don't define the cpp symbol
+dnl otherwise test for it and define it. also allow options for overriding
+dnl it when cross-compiling
+
+AC_DEFUN(OPENAFS_CHECK_BIGENDIAN, [
+AC_ARG_ENABLE(bigendian,
+[ --enable-bigendian the target is big endian],
+openafs_cv_c_bigendian=yes)
+AC_ARG_ENABLE(littleendian,
+[ --enable-littleendian the target is little endian],
+openafs_cv_c_bigendian=no)
+AC_CACHE_CHECK(whether byte order is known at compile time,
+openafs_cv_c_bigendian_compile,
+[AC_TRY_COMPILE([
+#include <sys/types.h>
+#include <sys/param.h>],[
+#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
+ bogus endian macros
+#endif], openafs_cv_c_bigendian_compile=yes, openafs_cv_c_bigendian_compile=no)])
+AC_CACHE_CHECK(whether byte ordering is bigendian, openafs_cv_c_bigendian,[
+ if test "$openafs_cv_c_bigendian_compile" = "yes"; then
+ AC_TRY_COMPILE([
+#include <sys/types.h>
+#include <sys/param.h>],[
+#if BYTE_ORDER != BIG_ENDIAN
+ not big endian
+#endif], openafs_cv_c_bigendian=yes, openafs_cv_c_bigendian=no)
+ else
+ AC_TRY_RUN([main () {
+ /* Are we little or big endian? From Harbison&Steele. */
+ union
+ {
+ long l;
+ char c[sizeof (long)];
+ } u;
+ u.l = 1;
+ exit (u.c[sizeof (long) - 1] == 1);
+ }], openafs_cv_c_bigendian=no, openafs_cv_c_bigendian=yes,
+ AC_MSG_ERROR([specify either --enable-bigendian or --enable-littleendian]))
+ fi
+])
+if test "$openafs_cv_c_bigendian" = "yes"; then
+ AC_DEFINE(WORDS_BIGENDIAN, 1, [define if target is big endian])dnl
+fi
+if test "$openafs_cv_c_bigendian_compile" = "yes"; then
+ AC_DEFINE(ENDIANESS_IN_SYS_PARAM_H, 1, [define if sys/param.h defines the endiness])dnl
+fi
+])
--- /dev/null
+AC_DEFUN(LINUX_INODE_SETATTR_RETURN_TYPE,[
+AC_MSG_CHECKING(for inode_setattr return type)
+save_CPPFLAGS="$CPPFLAGS"
+CPPFLAGS="-I${LINUX_KERNEL_PATH}/include -D__KERNEL__ $CPPFLAGS"
+AC_CACHE_VAL(ac_cv_linux_func_inode_setattr_returns_int,
+[
+AC_TRY_COMPILE(
+[#include <linux/fs.h>],
+[struct inode _inode;
+struct iattr _iattr;
+int i;
+i = inode_setattr(&_inode, &_iattr);],
+ac_cv_linux_func_inode_setattr_returns_int=yes,
+ac_cv_linux_func_inode_setattr_returns_int=no)])
+AC_MSG_RESULT($ac_cv_linux_func_inode_setattr_returns_int)
+CPPFLAGS="$save_CPPFLAGS"])
--- /dev/null
+AC_DEFUN(LINUX_FS_STRUCT_INODE_HAS_I_BYTES, [
+AC_MSG_CHECKING(for i_bytes in struct inode)
+save_CPPFLAGS="$CPPFLAGS"
+CPPFLAGS="-I${LINUX_KERNEL_PATH}/include -D__KERNEL__ $CPPFLAGS"
+AC_CACHE_VAL(ac_cv_linux_fs_struct_inode_has_i_bytes,
+[
+AC_TRY_COMPILE(
+[#include <linux/fs.h>],
+[struct inode _inode;
+printf("%d\n", _inode.i_bytes);],
+ac_cv_linux_fs_struct_inode_has_i_bytes=yes,
+ac_cv_linux_fs_struct_inode_has_i_bytes=no)])
+AC_MSG_RESULT($ac_cv_linux_fs_struct_inode_has_i_bytes)
+CPPFLAGS="$save_CPPFLAGS"])
+
+++ /dev/null
-/* config.h.in. Generated automatically from configure.in by autoheader. */
-
-/* Define if lex declares yytext as a char * by default, not a char[]. */
-#undef YYTEXT_POINTER
-
-/* Name of package */
-#undef PACKAGE
-
-/* Version number of package */
-#undef VERSION
-
# kernel include environment. param.h is, well, param.h. The afs_sysnames.h
# file is needed by param.h to create unique identifiers for each SYS_TYPE.
-kinstall: lkversion config $(KDIRS) ${KERNELDIR}/afs/param.h \
+# lkversion
+kinstall: config $(KDIRS) ${KERNELDIR}/afs/param.h \
${KERNELDIR}/afs/stds.h \
${KERNELDIR}/afs/afs_sysnames.h \
${KERNELDIR}/config/Makefile.${SYS_NAME} \
${UKERNELDIR}/afs/AFS_component_version_number.c
clean:
- $(RM) -f *.o config core xprt
+ $(RM) -f *.o config core xprt AFS_component_version_number.c
MT_CFLAGS=-D_REENTRANT=1 -pthread -DAFS_PTHREAD_ENV ${XCFLAGS}
SHLIB_SUFFIX=so
SHLIB_CFLAGS=
-XLIBS=
+XLIBS=@LIB_AFSDB@
MTLIBS=-pthread -lpthread -lmach -lexc -lc
NON_SHARED=-non_shared
TXLIBS= -lcurses
LWP_OPTMZ=-O2
OPTMZ=-O2
DBG=-g3
-CP=cp
CSTATIC=-non_shared
RANLIB=/bin/true
WASHTOOL=${DESTDIR}bin/washtool
INSTALL=${DESTDIR}bin/install
+CP=cp
#this is for the vol package
FS_CONV_OSF40D= $(DESTDIR)root.server/usr/afs/bin/fs_conv_dux40D
MT_CFLAGS=-D_REENTRANT=1 -pthread -DAFS_PTHREAD_ENV ${XCFLAGS}
SHLIB_SUFFIX=so
SHLIB_CFLAGS=
-XLIBS=
+XLIBS=@LIB_AFSDB@
MTLIBS=-pthread -lpthread -lmach -lexc -lc
NON_SHARED=-non_shared
TXLIBS= -lcurses
LWP_OPTMZ=-O2
OPTMZ=-O2
DBG=-g3
+CP=cp
CSTATIC=-non_shared
RANLIB=/bin/true
WASHTOOL=${DESTDIR}bin/washtool
# libraries
MTLIBS=-lpthread
TXLIBS= /usr/lib/libncurses.so
-XLIBS=
+XLIBS=@LIB_AFSDB@
#
# programs
AR=ar
XCFLAGS=${XCFLAGS0} +DA1.0
XCFLAGS64=${XCFLAGS0} +DA2.0W
MT_CFLAGS=-D_POSIX_C_SOURCE=199506L -DAFS_PTHREAD_ENV ${XCFLAGS}
-XLIBS=
+XLIBS=@LIB_AFSDB@
XLIBELFA=
TXLIBS=/usr/lib/libHcurses.a
MTLIBS=-L/opt/dce/lib -ldce
XCFLAGS=${XCFLAGS0} +DA1.0
XCFLAGS64=${XCFLAGS0} +DA2.0W
MT_CFLAGS=-D_POSIX_C_SOURCE=199506L -DAFS_PTHREAD_ENV ${XCFLAGS}
-XLIBS=-lnsl
+XLIBS=@LIB_AFSDB@ -lnsl
XLIBELFA=-lelf
TXLIBS=/usr/lib/libHcurses.a
MTLIBS=-lpthread
# libraries
MTLIBS=-pthread
TXLIBS= /usr/lib/libncurses.so
-XLIBS=-lcompat
+XLIBS=@LIB_AFSDB@ -lcompat
+
#
# programs
AR=ar
# libraries
MTLIBS=-lpthread
TXLIBS= /usr/lib/libncurses.so
-XLIBS=
+XLIBS= @LIB_AFSDB@
#
# programs
AR=ar
# libraries
MTLIBS=-lpthread
TXLIBS= /usr/lib/libncurses.so
-XLIBS=
+XLIBS= @LIB_AFSDB@
#
# programs
AR=ar
#
# libraries
-#XLIBS=
+XLIBS=@LIB_AFSDB@
TXLIBS=
#MTLIBS=
#XLIBELFA=
#
# libraries
-#XLIBS=
+XLIBS=@LIB_AFSDB@
TXLIBS=
#MTLIBS=
#XLIBELFA=
# libraries
MTLIBS=-lpthread
TXLIBS= /usr/lib/libncurses.so
-XLIBS=
+XLIBS=@LIB_AFSDB@
#
# programs
AR=ar
# libraries
MTLIBS=-lpthread
TXLIBS= /usr/lib/libncurses.so
-XLIBS=
+XLIBS=@LIB_AFSDB@
#
# programs
AR=ar
# libraries
TXLIBS=-lcurses
MTLIBS=-lpthreads
-XLIBS=-ldl
+XLIBS=@LIB_AFSDB@ -ldl
#
# programs
MT_CC=xlc_r
# libraries
MTLIBS=-lpthread
TXLIBS= /usr/lib/libncurses.so
-XLIBS=
+XLIBS=@LIB_AFSDB@
#
# programs
AR=ar
# libraries
MTLIBS=-lpthread
TXLIBS= /usr/lib/libncurses.so
-XLIBS=
+XLIBS=@LIB_AFSDB@
#
# programs
AR=ar
#
# libraries
TXLIBS= -lcurses
-XLIBS=
+XLIBS=@LIB_AFSDB@
MTLIBS=-lpthread
SHLIB_SUFFIX=so
#
#
# libraries
TXLIBS= -lcurses
-XLIBS=
+XLIBS=@LIB_AFSDB@
MTLIBS=-lpthread
SHLIB_SUFFIX=so
#
#
# libraries
TXLIBS= -lcurses
-XLIBS=
+XLIBS=@LIB_AFSDB@
MTLIBS=-lpthread
SHLIB_SUFFIX=so
SHLIB_CFLAGS=
#
# libraries
TXLIBS= -lcurses
-XLIBS=
+XLIBS=@LIB_AFSDB@
MTLIBS=-lpthread
SHLIB_SUFFIX=so
SHLIB_CFLAGS=
# libraries
MTLIBS=-lpthread
TXLIBS= /usr/lib/libncurses.so
-XLIBS=
+XLIBS=@LIB_AFSDB@
#
# programs
AR=ar
# libraries
MTLIBS=-lpthread
TXLIBS= /usr/lib/libncurses.so
-XLIBS=
+XLIBS=@LIB_AFSDB@
#
# programs
AR=ar
DBG=-g
#
# libraries
-XLIBS=-lsocket -lnsl -lintl -ldl
+XLIBS=@LIB_AFSDB@ -lsocket -lnsl -lintl -ldl
TXLIBS=-lcurses
MTLIBS=-lpthread -lsocket
XLIBELFA=-lelf
DBG=-g
#
# libraries
-XLIBS=-lsocket -lnsl -lintl -ldl
+XLIBS=@LIB_AFSDB@ -lsocket -lnsl -lintl -ldl
TXLIBS=-L/usr/ccs/lib -lcurses
MTLIBS=-lpthread -lsocket
XLIBELFA=-lelf
#
# libraries
-XLIBS=-lsocket -lnsl -lintl -ldl
+XLIBS=@LIB_AFSDB@ -lsocket -lnsl -lintl -ldl
TXLIBS=-lcurses
MTLIBS=-lpthread -lsocket
XLIBELFA=-lelf
#
# libraries
-XLIBS=-lsocket -lnsl -lintl -ldl
+XLIBS=@LIB_AFSDB@ -lsocket -lnsl -lintl -ldl
TXLIBS=-lcurses
MTLIBS=-lpthread -lsocket
XLIBELFA=-lelf
# compilation and link editor flags
#
# libraries
+
+XLIBS=@LIB_AFSDB@
#
# programs
AR = /usr/ccs/bin/ar
--- /dev/null
+# Copyright 2000, International Business Machines Corporation and others.
+# All Rights Reserved.
+#
+# This software has been released under the terms of the IBM Public
+# License. For details, see the LICENSE file in the top-level source
+# directory or online at http://www.openafs.org/dl/license10.html
+
+AFS_component_version_number.o: AFS_component_version_number.c
+
+AFS_component_version_number.c:
+ echo 'char cml_version_number[]="@(#) OpenAFS devel built ' `date +"%Y-%m-%d"` '";' >AFS_component_version_number.c;
+ echo 'char* AFSVersion = "openafs devel"; ' >>AFS_component_version_number.c;
+
+noversion: install
+
--- /dev/null
+/* src/config/afsconfig.h.in. Generated automatically from configure.in by autoheader. */
+
+/* Define if on AIX 3.
+ System headers sometimes define this.
+ We just want to avoid a redefinition error message. */
+#ifndef _ALL_SOURCE
+#undef _ALL_SOURCE
+#endif
+
+/* Define to empty if the keyword does not work. */
+#undef const
+
+/* Define if you have <sys/wait.h> that is POSIX.1 compatible. */
+#undef HAVE_SYS_WAIT_H
+
+/* Define as __inline if that's what the C compiler calls it. */
+#undef inline
+
+/* Define if on MINIX. */
+#undef _MINIX
+
+/* Define to `int' if <sys/types.h> doesn't define. */
+#undef pid_t
+
+/* Define if the system does not provide POSIX.1 features except
+ with this defined. */
+#undef _POSIX_1_SOURCE
+
+/* Define if you need to in order for stat and other things to work. */
+#undef _POSIX_SOURCE
+
+/* Define as the return type of signal handlers (int or void). */
+#undef RETSIGTYPE
+
+/* Define to `unsigned' if <sys/types.h> doesn't define. */
+#undef size_t
+
+/* Define if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Define if lex declares yytext as a char * by default, not a char[]. */
+#undef YYTEXT_POINTER
+
+/* Define if you have the connect function. */
+#undef HAVE_CONNECT
+
+/* Define if you have the getdtablesize function. */
+#undef HAVE_GETDTABLESIZE
+
+/* Define if you have the gethostbyname function. */
+#undef HAVE_GETHOSTBYNAME
+
+/* Define if you have the random function. */
+#undef HAVE_RANDOM
+
+/* Define if you have the re_comp function. */
+#undef HAVE_RE_COMP
+
+/* Define if you have the re_exec function. */
+#undef HAVE_RE_EXEC
+
+/* Define if you have the res_search function. */
+#undef HAVE_RES_SEARCH
+
+/* Define if you have the snprintf function. */
+#undef HAVE_SNPRINTF
+
+/* Define if you have the socket function. */
+#undef HAVE_SOCKET
+
+/* Define if you have the srandom function. */
+#undef HAVE_SRANDOM
+
+/* Define if you have the utimes function. */
+#undef HAVE_UTIMES
+
+/* Define if you have the <direct.h> header file. */
+#undef HAVE_DIRECT_H
+
+/* Define if you have the <dirent.h> header file. */
+#undef HAVE_DIRENT_H
+
+/* Define if you have the <fcntl.h> header file. */
+#undef HAVE_FCNTL_H
+
+/* Define if you have the <io.h> header file. */
+#undef HAVE_IO_H
+
+/* Define if you have the <malloc.h> header file. */
+#undef HAVE_MALLOC_H
+
+/* Define if you have the <mntent.h> header file. */
+#undef HAVE_MNTENT_H
+
+/* Define if you have the <ndir.h> header file. */
+#undef HAVE_NDIR_H
+
+/* Define if you have the <netdb.h> header file. */
+#undef HAVE_NETDB_H
+
+/* Define if you have the <netinet/in.h> header file. */
+#undef HAVE_NETINET_IN_H
+
+/* Define if you have the <security/pam_modules.h> header file. */
+#undef HAVE_SECURITY_PAM_MODULES_H
+
+/* Define if you have the <siad.h> header file. */
+#undef HAVE_SIAD_H
+
+/* Define if you have the <signal.h> header file. */
+#undef HAVE_SIGNAL_H
+
+/* Define if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define if you have the <sys/dir.h> header file. */
+#undef HAVE_SYS_DIR_H
+
+/* Define if you have the <sys/fcntl.h> header file. */
+#undef HAVE_SYS_FCNTL_H
+
+/* Define if you have the <sys/file.h> header file. */
+#undef HAVE_SYS_FILE_H
+
+/* Define if you have the <sys/fs_types.h> header file. */
+#undef HAVE_SYS_FS_TYPES_H
+
+/* Define if you have the <sys/mntent.h> header file. */
+#undef HAVE_SYS_MNTENT_H
+
+/* Define if you have the <sys/mnttab.h> header file. */
+#undef HAVE_SYS_MNTTAB_H
+
+/* Define if you have the <sys/mount.h> header file. */
+#undef HAVE_SYS_MOUNT_H
+
+/* Define if you have the <sys/ndir.h> header file. */
+#undef HAVE_SYS_NDIR_H
+
+/* Define if you have the <sys/param.h> header file. */
+#undef HAVE_SYS_PARAM_H
+
+/* Define if you have the <sys/time.h> header file. */
+#undef HAVE_SYS_TIME_H
+
+/* Define if you have the <sys/vfs.h> header file. */
+#undef HAVE_SYS_VFS_H
+
+/* Define if you have the <termios.h> header file. */
+#undef HAVE_TERMIOS_H
+
+/* Define if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define if you have the <usersec.h> header file. */
+#undef HAVE_USERSEC_H
+
+/* Define if you have the <windows.h> header file. */
+#undef HAVE_WINDOWS_H
+
+/* Define if you have the <winsock2.h> header file. */
+#undef HAVE_WINSOCK2_H
+
+/* Name of package */
+#undef PACKAGE
+
+/* Version number of package */
+#undef VERSION
+
+/* define if target is big endian */
+#undef WORDS_BIGENDIAN
+
+/* define if sys/param.h defines the endiness */
+#undef ENDIANESS_IN_SYS_PARAM_H
+
+
+#define RCSID(msg) \
+static /**/const char *const rcsid[] = { (char *)rcsid, "\100(#)" msg }
+
+#undef HAVE_CONNECT
+#undef HAVE_GETHOSTBYNAME
+#undef HAVE_RES_SEARCH
+#undef HAVE_SOCKET
+
+#if ENDIANESS_IN_SYS_PARAM_H
+# include <sys/types.h>
+# include <sys/param.h>
+# if BYTE_ORDER == BIG_ENDIAN
+# define WORDS_BIGENDIAN 1
+# endif
+#endif
+
+#undef AFS_AFSDB_ENV
+#undef AFS_NAMEI_ENV
+#undef BOS_RESTRICTED_MODE
#define AFS_64BIT_IOPS_ENV 1
#define AFS_NAMEI_ENV 1 /* User space interface to file system */
+/* Machine / Operating system information */
+#define SYS_NAME "i386_linux22"
+#define SYS_NAME_ID SYS_NAME_ID_i386_linux22
+#define AFSLITTLE_ENDIAN 1
+#define AFS_HAVE_FFS 1 /* Use system's ffs. */
+#define AFS_HAVE_STATVFS 0 /* System doesn't support statvfs */
+#define AFS_VM_RDWR_ENV 1 /* read/write implemented via VM */
+
#if defined(__KERNEL__) && !defined(KDUMP_KERNEL)
+#if defined(MODULE) && defined(CONFIG_MODVERSIONS)
+#define MODVERSIONS
+#include <linux/modversions.h>
+#endif
+
#include <linux/config.h>
#ifdef CONFIG_SMP
#undef CONFIG_SMP
#define AFS_GLOBAL_SUNLOCK
#endif
-#if defined(MODULE) && defined(CONFIG_MODVERSIONS)
-#define MODVERSIONS
-#include <linux/modversions.h>
-#endif
-
#endif /* __KERNEL__ && !DUMP_KERNEL*/
#include <afs/afs_sysnames.h>
+++ /dev/null
-AC_INIT(src/config/stds.h)
-AM_INIT_AUTOMAKE(openafs,devel)
-AC_CANONICAL_HOST
-AC_CONFIG_HEADER(src/afsconfig.h)
-
-AC_ARG_ENABLE( obsolete,
-[ --disable-obsolete disable obsolete portions of AFS (mpp, ntp and package)],, enable_obsolete="yes")
-AC_ARG_ENABLE( insecure,
-[ --disable-insecure disable insecure portions of AFS (ftpd, inetd, rcp, rlogind and rsh)],, enable_insecure="yes")
-AC_ARG_ENABLE( afsdb,
-[ --enable-afsdb enable AFSDB RR support],, enable_afsdb="no")
-AC_ARG_ENABLE( namei-fileserver,
-[ --enable-namei-fileserver force compilation of namei fileserver in preference to inode fileserver],, enable_namei_fileserver="no")
-
-AC_PROG_CC
-
-dnl weird ass systems
-AC_AIX
-AC_ISC_POSIX
-AC_MINIX
-
-dnl Various compiler setup.
-AC_C_BIGENDIAN
-AC_C_INLINE
-AC_C_CONST
-AC_TYPE_PID_T
-AC_TYPE_SIZE_T
-AC_TYPE_SIGNAL
-
-dnl Checks for programs.
-AC_PROG_INSTALL
-AC_PROG_LN_S
-AC_PROG_RANLIB
-AC_PROG_YACC
-AM_PROG_LEX
-
-dnl fix to use config.sub output
-AC_MSG_CHECKING(your OS)
-system=$host
-IRIX=no
-case $system in
- *-linux*)
- LINUX=1
- AC_MSG_RESULT(Linux)
- ;;
- *-solaris*)
- SYSV=1
- SVR4=1
- SOLARIS=1
- AC_MSG_RESULT(Solaris)
- if test "$CC" = cc; then
- CFLAGS="$CFLAGS -mt"
- fi
- ;;
- *-hpux*)
- hpux=1
- AC_MSG_RESULT(HP-UX)
- CFLAGS="$CFLAGS -D_HPUX_SOURCE -DHPUX"
- if test "$CC" = cc; then
- CFLAGS="$CFLAGS -Aa"
- fi
- ;;
- *-irix*)
- IRIX=yes
- AC_MSG_RESULT(IRIX)
- ;;
- *-aix*)
- AIX=yes
- AC_MSG_RESULT(AIX)
- ;;
- *)
- AC_MSG_RESULT($system)
- ;;
-esac
-
-if test ${IRIX} = yes; then
- echo Skipping library tests because they confuse Irix.
-else
- AC_CHECK_FUNCS(socket)
-
- if test "$ac_cv_func_socket" = no; then
- for lib in socket inet; do
- if test "$HAVE_SOCKET" != 1; then
- AC_CHECK_LIB($lib, socket,LIBS="$LIBS -l$lib";HAVE_SOCKET=1;AC_DEFINE(HAVE_SOCKET))
- fi
- done
- fi
-
- AC_CHECK_FUNCS(connect)
-
- if test "$ac_cv_func_connect" = no; then
- for lib in nsl; do
- if test "$HAVE_CONNECT" != 1; then
- AC_CHECK_LIB($lib, connect,LIBS="$LIBS -l$lib";HAVE_CONNECT=1;AC_DEFINE(HAVE_CONNECT))
- fi
- done
- fi
-
- AC_CHECK_FUNCS(gethostbyname)
- if test "$ac_cv_func_gethostbyname" = no; then
- for lib in dns nsl resolv; do
- if test "$HAVE_GETHOSTBYNAME" != 1; then
- AC_CHECK_LIB($lib, gethostbyname, LIBS="$LIBS -l$lib";HAVE_GETHOSTBYNAME=1;AC_DEFINE(HAVE_GETHOSTBYNAME))
- fi
- done
- fi
-fi
-
-PTHREAD_LIBS=error
-AC_CHECK_LIB(pthread, pthread_attr_init,
- PTHREAD_LIBS="-lpthread")
-if test "x$PTHREAD_LIBS" = xerror; then
- AC_CHECK_LIB(pthreads, pthread_attr_init,
- PTHREAD_LIBS="-lpthreads")
-fi
-if test "x$PTHREAD_LIBS" = xerror; then
- AC_CHECK_LIB(c_r, pthread_attr_init,
- PTHREAD_LIBS="-lc_r")
-fi
-if test "x$PTHREAD_LIBS" = xerror; then
- AC_CHECK_FUNC(pthread_attr_init, PTHREAD_LIBS="")
-fi
-if test "x$PTHREAD_LIBS" = xerror; then
- AC_MSG_ERROR(*** Unable to locate working posix thread library ***)
-fi
-AC_SUBST(PTHREAD_LIBS)
-
-dnl checks for header files.
-AC_HEADER_STDC
-AC_HEADER_SYS_WAIT
-AC_HEADER_DIRENT
-AC_CHECK_HEADERS(stdlib.h string.h unistd.h fcntl.h sys/time.h sys/file.h)
-AC_CHECK_HEADERS(netinet/in.h netdb.h sys/fcntl.h sys/mnttab.h sys/mntent.h)
-AC_CHECK_HEADERS(mntent.h sys/vfs.h sys/param.h sys/fs_types.h)
-AC_CHECK_HEADERS(sys/mount.h strings.h termios.h signal.h)
-AC_CHECK_HEADERS(windows.h malloc.h winsock2.h direct.h io.h)
-
-AC_CHECK_FUNCS(utimes random srandom getdtablesize snprintf re_comp re_exec)
-
-AC_OUTPUT( \
-Makefile \
-config/Makefile \
-procmgmt/Makefile \
-procmgmt/afs/Makefile \
-util/Makefile \
-util/afs/Makefile \
-comerr/Makefile \
-rxgen/Makefile \
-include/Makefile \
-include/afs/Makefile \
-include/rx/Makefile
-)
all: dlog dpass
clean:
- rm -f adkint.h adkint.cs.c adkint.ss.c adkint.xdr.c *.o dlog
+ rm -f adkint.h adkint.cs.c adkint.ss.c adkint.xdr.c *.o dlog dpass AFS_component_version_number.c
adkint.cs.o: adkint.cs.c
adkint.xdr.o: adkint.xdr.c adkint.h
${INSTALL} odd.h ${DESTDIR}include/des_odd.h
clean:
- rm -f ${OBJECTS} ${DEP_LIBS} ${PROGS} ${GPROGS} ${GFILES} AFS_component_version_number.c
+ rm -f ${OBJECTS} ${DEP_LIBS} ${PROGS} ${GPROGS} ${GFILES} AFS_component_version_number.c misco.c
rm -f *.s *.o *.b core *~ *.com *.ld
rm -f tags TAGS ${LLIB}
${INSTALL} afscbint.h ${DESTDIR}include/afs
clean:
- rm -f *.o *.cs.c *.ss.c *.er.c afsint.h afsint.xdr.c libafsint.a $(KDSRCS) core AFS_component_version_number.c
+ rm -f *.o *.cs.c *.ss.c *.er.c afsint.h afsint.xdr.c libafsint.a $(KDSRCS) core AFS_component_version_number.c afscbint.xdr.c
cd test; $(MAKE)
clean:
- rm -f *.o kaserver kas klog multiklog kpasswd klogin rebuild kauth.cs.c kauth.ss.c kauth.xdr.c kauth.h kautils.h kaerrors.c *.a core kpwvalid AFS_component_version_number.c
+ rm -f *.o kaserver kas klog multiklog kpasswd klogin rebuild kauth.cs.c kauth.ss.c kauth.xdr.c kauth.h kautils.h kaerrors.c *.a core kpwvalid AFS_component_version_number.c klog.krb knfs klogin.krb kdb Kkauth.xdr.c Kkauth.h
kaserver: kautils.o kalocalcell.o kadatabase.o kaprocs.o kalog.o kauth.ss.o kauth.xdr.o kaserver.o kaaux.o krb_udp.o kaauxdb.o $(LIBS) ${auditlib}
${CC} ${LDFLAGS} -o kaserver kaserver.o kautils.o kalocalcell.o kadatabase.o krb_udp.o kaprocs.o kalog.o kauth.ss.o kauth.xdr.o kaaux.o kaauxdb.o $(LIBS) ${XLIBS} ${auditlib}
system install:
${INSTALL} afs_Admin.h ${DESTDIR}include/afs
+clean:
+
clean:
-rm -rf STATIC* MODLOAD*
- -rm -f h net netinet rpc ufs machine inet nfs sys
+ -rm -rf h net netinet rpc ufs machine inet nfs sys afs afsint asm asm-generic config rx
#
DESTDIR=DEST/
-include $(DESTDIR)../obj/config/Makefile.${SYS_NAME}
+include ../config/Makefile.${SYS_NAME}
# OS specific object files:
AFS_OS_OBJS = \
#
DESTDIR=DEST/
-include $(DESTDIR)../obj/config/Makefile.${SYS_NAME}
+include ../config/Makefile.${SYS_NAME}
# OS specific object files:
#
DESTDIR=DEST/
-include $(DESTDIR)../obj/config/Makefile.${SYS_NAME}
+include ../config/Makefile.${SYS_NAME}
# OS specific object files:
#
DESTDIR=DEST/
-# include $(DESTDIR)/../obj/config/Makefile.${SYS_NAME}
-
+# include ../config/Makefile.${SYS_NAME}
# OS specific object files:
AFS_OS_OBJS = \
#
DESTDIR=DEST/
-include $(DESTDIR)../obj/config/Makefile.${SYS_NAME}
+include ../config/Makefile.${SYS_NAME}
# OS specific object files:
AFS_OS_OBJS = \
#
DESTDIR=DEST/
-include $(DESTDIR)../obj/config/Makefile.${SYS_NAME}
-
+include ../config/Makefile.${SYS_NAME}
# OS specific object files:
AFS_OS_OBJS = \
KOBJ = MODLOAD
MPS = MP SP
-# To pick up anything we might have missed
-include Makefile.extradefs
-
# COMPDIRS is called in Makefile.common to do the actual builds.
COMPDIRS=linux_compdirs
-
include Makefile.common
+LINUX_VERS=@LINUX_VERSION@
+LINUX_KERNEL_PATH=@LINUX_KERNEL_PATH@
+
setup:
-rm -f h net netinet sys rpc
-ln -s rx rpc
- for v in ${LINUX_VERS} ; do \
- for m in ${MPS} ; do \
- KDIR=$(KOBJ)-$$v-$$m; \
- mkdir -p $${KDIR}; \
- ln -fs ../Makefile $${KDIR}/Makefile ; \
- ln -fs ../Makefile.common $${KDIR}/Makefile.common; \
-<i386_linux22 i386_linux24 s390_linux24>
- sh ./redhat.sh ${LINUX_SRCDIR}$$v $${KDIR}/Makefile.extradefs; \
-<all>
- done \
- done
+ for m in ${MPS} ; do \
+ KDIR=$(KOBJ)-${LINUX_VERS}-$$m; \
+ mkdir -p $${KDIR}; \
+ ln -fs ../Makefile $${KDIR}/Makefile ; \
+ ln -fs ../Makefile.common $${KDIR}/Makefile.common; \
+ done
# Compile SP and MP clients as requested
-LINUX_INCDIR=include/linux
-
${COMPDIRS}:
- for v in ${LINUX_VERS} ; do \
- IDIR=${LINUX_SRCDIR}$$v/${LINUX_INCDIR}; \
- rm -f h; \
- ln -s $${IDIR} h; \
- rm -f linux; \
- ln -s $${IDIR} linux; \
- rm -f net; \
- ln -s $${IDIR} net; \
- rm -f netinet; \
- ln -s $${IDIR} netinet; \
- rm -f sys; \
- ln -s $${IDIR} sys; \
- rm -f asm-generic; \
- ln -s ${LINUX_SRCDIR}$$v/include/asm-generic asm-generic; \
- rm -f asm; \
+ rm -f h
+ ln -s ${LINUX_KERNEL_PATH}/include/linux h
+ rm -f linux
+ ln -s ${LINUX_KERNEL_PATH}/include/linux linux
+ rm -f net
+ ln -s ${LINUX_KERNEL_PATH}/include/linux net
+ rm -f netinet
+ ln -s ${LINUX_KERNEL_PATH}/include/linux netinet
+ rm -f sys
+ ln -s ${LINUX_KERNEL_PATH}/include/linux sys
+ rm -f asm-generic
+ ln -s ${LINUX_KERNEL_PATH}/include/asm-generic asm-generic
+ rm -f asm
<alpha_linux_22 alpha_linux_24>
- ln -s ${LINUX_SRCDIR}$$v/include/asm-alpha asm ; \
+ ln -s ${LINUX_KERNEL_PATH}/include/asm-alpha asm
<i386_linux22 i386_linux24>
- ln -s ${LINUX_SRCDIR}$$v/include/asm-i386 asm ; \
+ ln -s ${LINUX_KERNEL_PATH}/include/asm-i386 asm
<s390_linux22 s390_linux24>
- ln -s ${LINUX_SRCDIR}$$v/include/asm-s390 asm ; \
+ ln -s ${LINUX_KERNEL_PATH}/include/asm-s390 asm
<ppc_linux22 ppc_linux24>
- ln -s ${LINUX_SRCDIR}$$v/include/asm-ppc asm ; \
+ ln -s ${LINUX_KERNEL_PATH}/include/asm-ppc asm
<sparc_linux22 sparc_linux24>
- ln -s ${LINUX_SRCDIR}$$v/include/asm-sparc asm ; \
+ ln -s ${LINUX_KERNEL_PATH}/include/asm-sparc asm
<sparc64_linux22 sparc64_linux24>
- ln -s ${LINUX_SRCDIR}$$v/include/asm-sparc64 asm ; \
+ ln -s ${LINUX_KERNEL_PATH}/include/asm-sparc64 asm
<all>
- for m in ${MPS} ; do \
- KDIR=${KOBJ}-$$v-$$m ; \
- echo Building in directory: $${KDIR} ; \
- if [ "$$m" = "MP" ] ; then \
- SMP_DEF="-DAFS_SMP -D__BOOT_KERNEL_SMP=1 -D__BOOT_KERNEL_UP=0 -D__SMP__" ; \
- TARG="libafs.mp" ; \
- else \
- SMP_DEF="-D__BOOT_KERNEL_SMP=0 -D__BOOT_KERNEL_UP=1 -U__SMP__" ; \
- TARG=libafs ; \
- fi ; \
- cd $${KDIR} ; \
- $(MAKE) DESTDIR=${DESTDIR} SMP_DEF="$${SMP_DEF}" $${TARG} CLIENT=$$v || exit $$?; \
- cd ../ ; \
- done \
+ for m in ${MPS} ; do \
+ KDIR=${KOBJ}-${LINUX_VERS}-$$m ; \
+ echo Building in directory: $${KDIR} ; \
+ if [ "$$m" = "MP" ] ; then \
+ SMP_DEF="-DAFS_SMP -D__BOOT_KERNEL_SMP=1 -D__BOOT_KERNEL_UP=0 -D__SMP__" ; \
+ TARG="libafs.mp" ; \
+ else \
+ SMP_DEF="-D__BOOT_KERNEL_SMP=0 -D__BOOT_KERNEL_UP=1 -U__SMP__" ; \
+ TARG=libafs ; \
+ fi ; \
+ cd $${KDIR} ; \
+ $(MAKE) DESTDIR=${DESTDIR} SMP_DEF="$${SMP_DEF}" $${TARG} CLIENT=${LINUX_VERS} || exit $$?; \
+ cd ../ ; \
done
# MakefileProto for Solaris systems
#
-
-include $(DESTDIR)../obj/config/Makefile.${SYS_NAME}
-
+include ../config/Makefile.${SYS_NAME}
# OS specific object files:
AFS_OS_OBJS = \
ukinstall: ukinsthdrs UAFS/$(LIBUAFS) linktest ukinstlibs
linktest: UAFS/$(LIBUAFS) des/libdes.a
- $(CC) $(TEST_CFLAGS) $(TEST_LDFLAGS) -o linktest linktest.c -I${DESTDIR}include -I${DESTDIR}include/rx -I${DESTDIR}root.perf/include UAFS/$(LIBUAFS) des/libdes.a $(TEST_LIBS)
+ $(CC) $(TEST_CFLAGS) $(TEST_LDFLAGS) -o linktest linktest.c -I${DESTDIR}include -I${DESTDIR}include/rx -I${DESTDIR}root.perf/include UAFS/$(LIBUAFS) des/libdes.a $(TEST_LIBS) $(XLIBS)
CRULE1= $(CC) $(OPTF) -DKERNEL $(CFLAGS) -c $?
CRULE2= $(CC) $(OPTF) $(WEBOPTS) -DKERNEL $(CFLAGS) -c $?
$(CRULE2);
clean:
- -rm -rf UAFS* AFSWEB*
- -rm -f h net netinet rpc ufs machine inet nfs sys
+ -rm -rf UAFS* AFSWEB* nsapi des
+ -rm -f h net netinet rpc ufs machine inet nfs sys des linktest afs afsint config rx
# MakefileProto for AIX systems
#
-include $(DESTDIR)../obj/config/Makefile.${SYS_NAME}
+include ../config/Makefile.${SYS_NAME}
MKDIR_IF_NEEDED=[ -d $$1 ] || mkdir -p $$1
#
DBUG=-O
-include $(DESTDIR)/../obj/config/Makefile.${SYS_NAME}
+include ../config/Makefile.${SYS_NAME}
MKDIR_IF_NEEDED=[ -d $$1 ] || mkdir -p $$1
# System specific build commands and flags
-CC = cc
DEFINES=-DAFSDEBUG -DKERNEL -DUKERNEL -DAFS -DVICE -D_NO_PROTO -DOSF
KOPTS=
DBUG=
# License. For details, see the LICENSE file in the top-level source
# directory or online at http://www.openafs.org/dl/license10.html
-# MakefileProto for Solaris systems
+# MakefileProto for HP-UX systems
#
-include $(DESTDIR)../obj/config/Makefile.${SYS_NAME}
+include ../config/Makefile.${SYS_NAME}
MKDIR_IF_NEEDED=[ -d $$1 ] || mkdir -p $$1
# MakefileProto for Solaris systems
#
-include $(DESTDIR)../obj/config/Makefile.${SYS_NAME}
+include ../config/Makefile.${SYS_NAME}
MKDIR_IF_NEEDED=[ -d $$1 ] || mkdir -p $$1
# MakefileProto for Solaris systems
#
-include $(DESTDIR)../obj/config/Makefile.${SYS_NAME}
+include ../config/Makefile.${SYS_NAME}
MKDIR_IF_NEEDED=[ -d $$1 ] || mkdir -p $$1
# System specific build commands and flags
-# Redundant
-# CC = /opt/SUNWspro/bin/cc
DEFINES= -D_REENTRANT -DAFSDEBUG -DKERNEL -DUKERNEL -DAFS -DVICE
CFLAGS=-I. -I.. -I${TOP_SRCDIR}/config ${FSINCLUDES} $(DEFINES) $(KOPTS) ${DBUG}
OPTF=-O
lint ${INCDIRS} passwd.c
clean:
- rm -f *.o log passwd unlog tokens kseal core AFS_component_version_number.c
+ rm -f *.o log passwd unlog tokens kseal core AFS_component_version_number.c tokens.krb
beancount:
wc -l log.c passwd.c unlog.c
esac
clean:
- /bin/rm -f $(TARGETS) $(OBJS) afs_setcred.o afs_setcred_krb.o core *~
+ /bin/rm -f $(TARGETS) $(OBJS) afs_setcred.o afs_setcred_krb.o core *~ AFS_component_version_number.c
install: all
${INSTALL} -s pam_afs.so.1 ${DESTDIR}lib/pam_afs.so.1
clean:
$(RM) -f *.o ptserver ptint.cs.c ptint.ss.c ptclient ptint.xdr.c ptint.h \
libprot.a pts readgroup readpwd db_verify testpt pt_util pterror.h pterror.c \
- core AFS_component_version_number.c
+ core AFS_component_version_number.c Kptint.cs.c Kptint.h Kptint.xdr.c
ptserver: ptserver.o ptutils.o ptprocs.o ptint.ss.o ptint.xdr.o utils.o $(LIBS) ${auditlib}
$(CC) ${CFLAGS} -o ptserver ptserver.o ptutils.o ptprocs.o ptint.ss.o ptint.xdr.o utils.o $(LIBS) ${XLIBS} ${auditlib}
-$(INSTALL) UKERNEL/*.[ch] $(UKERNELDIR)rx
clean:
- rm -f *.o *.a core *_component_version_number.c
+ rm -f *.o *.a core *_component_version_number.c rxdumptrace rxdebug
system: install
clean:
- rm -f *.o tcrypt core *.a rxkad_errs.c rxkad.h AFS_component_version_number.c
+ rm -f *.o tcrypt core *.a rxkad_errs.c rxkad.h AFS_component_version_number.c crypt_conn.c fcrypt.c fcrypt.h sboxes.h
librxkad.a: $(OBJS) ${REGOBJS} AFS_component_version_number.o
-rm -f librxkad.a
afskauthlib.so: sgi_auth.o ${KAFSLIBS} ${AUTHFILES}
$(LD) ${LDFLAGS} -shared -all -o afskauthlib.so sgi_auth.o $(KAFSLIBS) ${AUTHFILES}
+../inetd/ta-rauth.o: ../inetd/ta-rauth.c
+ (cd ../inetd ; $(MAKE) ta-rauth.o )
+
../rsh/rcmd.o: ../rsh/rcmd.c
(cd ../rsh ; $(MAKE) rcmd.o )
all: test-reauth ${DESTDIR}/lib/afs/libafssiad.so ${DESTDIR}/lib/afs/libafssiad.krb.so
+clean:
+ rm -f test-reauth libafssiad.so libafssiad.krb.so *.s *.o *.b core *~ *.com *.ld AFS_component_version_number.c
+
CFLAGS = $(DEBUG) -I${SRCDIR}include ${XCFLAGS}
${DESTDIR}/lib/afs/libafssiad.so: libafssiad.so
clean:
rm -f *.o libsys.a xfsinode iinc idec icreate iopen istat core \
rmtsysc rmtsyss *.o rmtsys.ss.c rmtsys.cs.c rmtsys.xdr.c rmtsys.h \
- rmtsysd AFS_component_version_number.c
+ rmtsysd AFS_component_version_number.c pagsh pagsh.krb
beancount:
wc -l *.c *.s
clean:
rm -f *.o utst_server utst_client udebug *.a *.cs.c *.ss.c *.xdr.c
- rm -f utst_int.h ubik_int.h uerrors.c ubik.h core AFS_component_version_number.c
+ rm -f utst_int.h ubik_int.h uerrors.c ubik.h core AFS_component_version_number.c Kubik_int.h
system: install
utst_int.ss.o: utst_int.ss.c utst_int.xdr.c
utst_int.cs.o: utst_int.cs.c utst_int.xdr.c
utst_int.xdr.o: utst_int.xdr.c utst_int.h
-utst_int.rs.c utst_int.cs.c utst_int.xdr.c utst_int.h: utst_int.xg
+utst_int.ss.c utst_int.cs.c utst_int.xdr.c utst_int.h: utst_int.xg
${RXGEN} utst_int.xg
utst_server.o: utst_server.c ${INCLS} utst_int.h AFS_component_version_number.c
#include <netinet/in.h>
#include <netdb.h>
#endif
-#ifdev HAVE_UNISTD_H
+#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
#include <signal.h>
esac
clean:
- rm -f *.o *.a up fs core cmdebug AFS_component_version_number.c
+ rm -f *.o *.a up fs core cmdebug AFS_component_version_number.c fstrace gcpags
beancount:
wc -l *.c *.h
system: install
clean:
- rm -f *.o llib-lvice.ln fileserver core AFS_component_version_number.c
+ rm -f *.o llib-lvice.ln fileserver core AFS_component_version_number.c cbd check_sysid fsprobe
beancount:
wc -l *.c *.h
clean:
rm -f *.o *.a AFS_component_version_number.c
- rm -f ${SCMPROGS} ${STAGEPROGS} core
+ rm -f ${SCMPROGS} ${STAGEPROGS} core salvager volinfo
beancount:
wc -l *.c *.h
clean:
rm -f volserver *.o volint.ss.c volint.cs.c *.a volint.h \
- volint.xdr.c vos core volser.h volerr.c AFS_component_version_number.c
+ volint.xdr.c vos core volser.h volerr.c AFS_component_version_number.c restorevol
lint: vos.c vsprocs.c volmain.c volprocs.c lockprocs.c
lint -hb ${INCDIRS} ${INCLIBS} vos.c