-- Russ Allbery <rra@debian.org> Thu, 08 Apr 2010 13:20:50 -0700
+openafs (1.5.74.1-1) experimental; urgency=low
+
+ * New upstream testing release.
+ - Correctly recognize cache version differences in upgrades from 1.4
+ and invalidate the old cache.
+ - Resolve symlinks in fs rmmount.
+ - Include PID in byte-range lock warning.
+ * Preserve the AFS mount point and cache directorys set in
+ /etc/openafs/cacheinfo if the file already exists rather than
+ overwriting them with the defaults. Thanks, Liam Healy.
+ (Closes: #580077)
+ * In the openafs-client init script, don't assume that AFS is mounted on
+ /afs when unmounting it or killing processes with AFS files open.
+ Instead, parse /etc/mtab to find the AFS mount point.
+ * Move the experimental afsd.fuse AFS FUSE client into openafs-fuse to
+ avoid adding a FUSE dependency in openafs-client. Document its
+ current limitations in the package description.
+
+ -- Russ Allbery <rra@debian.org> Tue, 04 May 2010 21:49:52 -0700
+
+openafs (1.5.74-2) experimental; urgency=low
+
+ * Apply upstream deltas:
+ - [e6f6c349] Fixes and clarifications to vos setaddrs man page
+ - [d80382ef] Remove special-case call for KAM_SetPassword on s390
+ * Fix ucontext detection on ppc_linux26, hopefully fixing build failures
+ on the Debian powerpc architecture.
+ * Install afsd.fuse and a man page link for it if the FUSE client build
+ is enabled.
+ * Add build dependency on libfuse-dev and pass --enable-fuse-client to
+ configure so that the new FUSE afsd is built. Install afsd.fuse into
+ the openafs-client package for the time being; it will move to some
+ other package before being uploaded to unstable so that openafs-client
+ doesn't keep a dependency on libfuse. There is, as yet, no
+ documentation or init script support for the FUSE implementation.
+
+ -- Russ Allbery <rra@debian.org> Tue, 20 Apr 2010 18:12:06 -0700
+
openafs (1.5.74-1) experimental; urgency=low
* New upstream testing release.
- Network performance improvements.
- New libkopenafs library providing a kernel PAG manipulation
interface (a subset of the API provided by Heimdal's libkafs).
+ - Fix builds on sparc64. (LP: #181661)
* Apply upstream deltas:
- [7d395f17] Improve demand-attach fileserver bos documentation
- [a763edc3] Make src/rx/rx.c not executable
Uploaders: Sam Hartman <hartmans@debian.org>
Build-Depends: debhelper (>= 7), autoconf, automake, bison, comerr-dev,
cpio, dblatex, dkms (>= 2.1.1.1), docbook-xsl, doxygen, flex,
- libkrb5-dev, libncurses5-dev, libpam0g-dev, libxml2-utils, perl, xsltproc
+ libfuse-dev, libkrb5-dev, libncurses5-dev, libpam0g-dev, libxml2-utils,
+ perl, pkg-config, xsltproc
Standards-Version: 3.8.4
Homepage: http://www.openafs.org/
Vcs-Git: git://git.debian.org/git/pkg-k5-afs/openafs.git
AFS. If your site uses Kerberos v5 authentication for AFS, you will also
want to install openafs-krb5.
+Package: openafs-fuse
+Priority: extra
+Architecture: alpha amd64 arm armel i386 ia64 lpia powerpc ppc64 s390 s390x sparc
+Depends: ${shlibs:Depends}, ${misc:Depends}, openafs-client (>= 1.5.74.1)
+Description: AFS distributed file system experimental FUSE client
+ AFS is a distributed filesystem allowing cross-platform sharing of
+ files among multiple computers. Facilities are provided for access
+ control, authentication, backup and administrative management.
+ .
+ This package provides an experimental FUSE implementation of the AFS
+ client as afsd.fuse. This currently only provides read-only access to
+ AFS, doesn't work with all of the normal AFS client programs, and must be
+ started manually, but may be of interest in situations where read-only
+ access is sufficient and the kernel module cannot be built.
+
Package: openafs-kpasswd
Priority: extra
Architecture: alpha amd64 arm armel i386 ia64 lpia powerpc ppc64 s390 s390x sparc
git branch -f upstream-1.5 "$commit"
git tag "$tag" "$commit"
git rm -q -r -f "$dir"
+rm -rf "$dir"
# normally called via kill_all_afs.
kill_afs() {
signal=$1
- pids=`/usr/bin/lsof -Fp /afs | sed 's/p//'`
- if [ -n "$pids" ] ; then
- kill -$signal $pids > /dev/null 2>&1
- sleep 1
+ mount=`grep ^'AFS ' /etc/mtab | awk '{ print $2 }'`
+ if [ -n "$mount" ] ; then
+ pids=`/usr/bin/lsof -Fp $mount | sed 's/p//'`
+ if [ -n "$pids" ] ; then
+ kill -$signal $pids > /dev/null 2>&1
+ sleep 1
+ fi
fi
}
stop|force-stop)
$AFS_PRE_SHUTDOWN
echo -n "Stopping AFS services:"
- if mount | grep -q '^AFS' ; then
- umount /afs
+ if grep -q '^AFS ' /etc/mtab ; then
+ umount `grep ^'AFS ' /etc/mtab | awk '{ print $2 }'`
echo -n " afsd"
fi
if pidof /usr/sbin/afsd >/dev/null || pidof /sbin/afsd >/dev/null ; then
fi
fi
+ # Our config script will have already taken care of extracting the cache
+ # size from the cacheinfo file and using it as the default for the debconf
+ # prompt, but the mount point and cache directory have no debconf prompts.
+ # For those, we need to get the default from the file.
+ mountpoint=/afs
+ cachedir=/var/cache/openafs
+ if [ -r /etc/openafs/cacheinfo ] ; then
+ IFS=: read mountpoint cachedir cachesize < /etc/openafs/cacheinfo
+ fi
db_get openafs-client/cachesize
- echo /afs:/var/cache/openafs:$RET >/etc/openafs/cacheinfo
+ echo "${mountpoint}:${cachedir}:${RET}" > /etc/openafs/cacheinfo
echo <<'EOF' > /etc/openafs/afs.conf.client
# This file is managed by debconf. You may change the parameters set below,
--- /dev/null
+usr/share/doc
--- /dev/null
+debian/tmp/usr/sbin/afsd.fuse usr/sbin
--- /dev/null
+/usr/share/man/man8/afsd.8.gz usr/share/man/man8/afsd.fuse.8.gz
# The /usr/share/doc directory for these packages should be a symlink to
# /usr/share/doc/openafs-client. Any package on this list must depend on
# openafs-client.
-DOC_PACKAGES = libpam-openafs-kaserver openafs-dbserver openafs-kpasswd
+DOC_PACKAGES = libpam-openafs-kaserver openafs-dbserver openafs-fuse \
+ openafs-kpasswd
# These are files that we know we don't want to install. List them so that we
# can use dh_install --fail-missing and catch anything new that shows up.
-Xuss -Xvldb_convert -Xvsys -Xxfs_size_check
# Installed via other means since we have to rename them.
-IGNORE += -Xpam_afs
+IGNORE += -Xafsd.fuse.8 -Xpam_afs
# These variables are used by get-orig-source and to construct dkms.conf.
# You will need to change TAG to package stable releases instead of
--sysconfdir=/etc --libexecdir=/usr/lib \
--localstatedir=/var/lib --with-krb5-conf=/usr/bin/krb5-config \
--enable-supergroups --enable-demand-attach-fs \
- --enable-disconnected \
+ --enable-disconnected --enable-fuse-client \
--with-xslt-processor=xsltproc --with-html-xsl=$(HTML_XSL) \
--enable-debug --enable-debug-lwp $(DEBIAN_OPT_FLAGS) $(SYSTEM)
chmod a+x config.sub src/libafs/make_kbuild_makefile.pl \