3 backup - Introduction to the backup command suite
7 The commands in the B<backup> command suite are the administrative
8 interface to the AFS Backup System. There are several categories of
15 Commands to copy data from AFS volumes to tape or a backup data file, and
16 to restore it to the file system:
17 L<B<backup diskrestore>|backup_diskrestore(8)>,
18 L<B<backup dump>|backup_dump(8)>,
19 L<B<backup volrestore>|backup_volrestore(8)>,
20 and L<B<backup volsetrestore>|backup_volsetrestore(8)>.
24 Commands to administer the records in the Backup Database:
25 L<B<backup adddump>|backup_adddump(8)>,
26 L<B<backup addhost>|backup_addhost(8)>,
27 L<B<backup addvolentry>|backup_addvolentry(8)>,
28 L<B<backup addvolset>|backup_addvolset(8)>,
29 L<B<backup deldump>|backup_deldump(8)>,
30 L<B<backup deletedump>|backup_deletedump(8)>,
31 L<B<backup delhost>|backup_delhost(8)>,
32 L<B<backup delvolentry>|backup_delvolentry(8)>,
33 L<B<backup delvolset>|backup_delvolset(8)>,
34 L<B<backup dumpinfo>|backup_dumpinfo(8)>,
35 L<B<backup listdumps>|backup_listdumps(8)>,
36 L<B<backup listhosts>|backup_listhosts(8)>,
37 L<B<backup listvolsets>|backup_listvolsets(8)>,
38 L<B<backup scantape>|backup_scantape(8)>,
39 L<B<backup setexp>|backup_setexp(8)>,
40 and L<B<backup volinfo>|backup_volinfo(8)>.
44 Commands to write and read tape labels:
45 L<B<backup labeltape>|backup_labeltape(8)>
46 and L<B<backup readlabel>|backup_readlabel(8)>.
50 Commands to list and change the status of backup operations and the
51 machines performing them:
52 L<B<backup jobs>|backup_jobs(8)>,
53 L<B<backup kill>|backup_kill(8)>,
54 and L<B<backup status>|backup_status(8)>.
58 Commands to enter and leave interactive mode:
59 L<B<backup interactive>|backup_interactive(8)>
60 and L<B<backup quit>|backup_quit(8)>.
64 Commands to check for and repair corruption in the Backup Database:
65 L<B<backup dbverify>|backup_dbverify(8)>,
66 L<B<backup restoredb>|backup_restoredb(8)>,
67 and L<B<backup savedb>|backup_savedb(8)>.
71 Commands to obtain help:
72 L<B<backup apropos>|backup_apropos(8)>
73 and L<B<backup help>|backup_help(8)>.
77 A command to display the OpenAFS command suite version: B<backup version>.
81 The backup command interpreter interacts with two other processes:
87 The Backup Server (B<buserver>) process. It maintains the Backup Database,
88 which stores most of the administrative information used by the Backup
89 System. In the standard configuration, the Backup Server runs on each
90 database server machine in the cell, and uses AFS's distributed database
91 technology, Ubik, to synchronize its copy of the database with the copies
92 on the other database server machines.
96 The Backup Tape Coordinator (B<butc>) process. A separate instance of the
97 process controls each tape device or backup data file used to dump or
98 restore data. The Tape Coordinator runs on a Tape Coordinator machine,
99 which is an AFS server or client machine that has one or more tape devices
100 attached, or has sufficient disk space to accommodate one or more backup
101 data files on its local disk.
103 Each Tape Coordinator must be registered in the Backup Database and in the
104 F</usr/afs/backup/tapeconfig> configuration file on the Tape Coordinator
105 machine's local disk, and information in the two places must be consistent
106 for proper Backup System performance. The optional
107 F</usr/afs/backup/CFG_I<device_name>> for each Tape Coordinator records
108 information used to automate its operation.
112 In addition to the standard command line interface, the B<backup> command
113 suite provides an I<interactive> interface, which has several useful
114 features described in L<backup_interactive(8)>. Three of the commands in
115 the suite are available only in interactive mode:
116 L<B<backup jobs>|backup_jobs(8)>,
117 L<B<backup kill>|backup_kill(8)>,
118 and L<B<backup quit>|backup_quit(8)>
122 The following options are available on many commands in the B<backup>
123 suite. The reference page for each command also lists them, but they are
124 described here in greater detail.
128 =item B<-cell> <I<cell name>>
130 Names the cell in which to run the command. It is acceptable to abbreviate
131 the cell name to the shortest form that distinguishes it from the other
132 entries in the F</usr/vice/etc/CellServDB> file on the local machine. If
133 the B<-cell> argument is omitted, the command interpreter determines the
134 name of the local cell by reading the following in order:
140 The value of the AFSCELL environment variable.
144 The local F</usr/vice/etc/ThisCell> file.
148 Do not combine the B<-cell> and B<-localauth> options. A command on which
149 the B<-localauth> flag is included always runs in the local cell (as
150 defined in the server machine's local F</usr/afs/etc/ThisCell> file),
151 whereas a command on which the B<-cell> argument is included runs in the
152 specified foreign cell.
154 The B<-cell> argument is not available on commands issued in interactive
155 mode. The cell defined when the B<backup> command interpreter enters
156 interactive mode applies to all commands issued during the interactive
161 Prints a command's online help message on the standard output stream. Do
162 not combine this flag with any of the command's other options; when it is
163 provided, the command interpreter ignores all other options, and only
164 prints the help message.
168 Constructs a server ticket using the server encryption key with the
169 highest key version number in the local F</usr/afs/etc/KeyFile>
170 or F</usr/afs/etc/KeyFileExt> file. The
171 B<backup> command interpreter presents the ticket, which never expires, to
172 the Backup Server, Volume Server and Volume Location (VL) Server during
173 mutual authentication.
175 Use this flag only when issuing a command on a server machine; client
176 machines do not usually have a F</usr/afs/etc/KeyFile> or
177 F</usr/afs/etc/KeyFileExt> file. The issuer
178 of a command that includes this flag must be logged on to the server
179 machine as the local superuser C<root>. The flag is useful for commands
180 invoked by an unattended application program, such as a process controlled
181 by the UNIX B<cron> utility or by a cron entry in the machine's
182 F</usr/afs/local/BosConfig> file. It is also useful if an administrator is
183 unable to authenticate to AFS but is logged in as the local superuser
186 Do not combine the B<-cell> and B<-localauth> options. A command on which
187 the B<-localauth> flag is included always runs in the local cell (as
188 defined in the server machine's local F</usr/afs/etc/ThisCell> file),
189 whereas a command on which the B<-cell> argument is included runs in the
190 specified foreign cell.
192 The B<-localauth> argument is not available on commands issued in
193 interactive mode. The local identity and AFS tokens with which the
194 B<backup> command interpreter enters interactive mode apply to all
195 commands issued during the interactive session.
197 =item B<-portoffset> <I<TC port offset>>
199 Specifies the port offset number of the Tape Coordinator that is to
200 execute the B<backup> command. The port offset number uniquely identifies
201 a pairing of a Tape Coordinator (B<butc>) process and tape device or
204 The backup command interpreter and Tape Coordinator process communicate
205 via a UDP socket, or port. Before issuing a B<backup> command that
206 involves reading or writing a tape, the backup operator must start a
207 B<butc> process that controls the appropriate tape device and listens for
208 requests sent to its port number. If a Backup System machine has multiple
209 tape devices attached, they can perform backup operations simultaneously
210 because each device has its own associated B<butc> process and port offset
213 The Backup System associates a tape capacity and file mark size with each
214 port offset (as defined in the F<tapeconfig> file). For a compressing tape
215 device, the capacity and file mark values differ for compression and
216 non-compression modes, so the two modes have distinct port offset numbers.
218 The Backup Database can store up to 58,511 port offsets, so the legal
219 values for this argument are the integers C<0> through C<58510>. If the
220 issuer omits the argument, it defaults to C<0>. (The limit of 58,511 port
221 offsets results from the fact that UDP socket numbers are identified by a
222 16-bit integer, and the lowest socket number used by the Backup System is
223 7025. The largest number that a 16-bit integer can represent is
224 65,535. Subtracting 7,025 yields 58,510. The addition of port offset 0
225 (zero) increases the maximum to 58,511.)
227 Although it is possible to define up to 58,511 port offset numbers for a
228 cell, it is not possible to run 58,511 tape devices simultaneously, due to
229 the following limits:
235 The maximum number of dump or restore operations that can run
236 simultaneously is 64.
240 The maximum number of tape devices that can work together on a restore
241 operation is 128 (that is the maximum number of values that can be
242 provided for the B<-portoffset> argument to the
243 L<B<backup diskrestore>|backup_diskrestore(8)>,
244 L<B<backup volrestore>|backup_volrestore(8)>,
245 or L<B<backup volsetrestore>|backup_volsetrestore(8)> command).
249 The Backup System does not reserve UDP sockets. If another application is
250 already using the Tape Coordinator's socket when it tries to start, the
251 B<butc> process fails and the following error message appears at the shell
254 bind: Address already in use
255 rxi_GetUDPSocket: bind failed
259 =head1 PRIVILEGE REQUIRED
261 To issue any backup command that accesses the Backup Database only, the
262 issuer must be listed in the F</usr/afs/etc/UserList> file on every
263 machine where the Backup Server is running. To issue any B<backup> command
264 that accesses volume data, the issuer must appear in the F<UserList> file
265 on every Backup Server machine, every Volume Location (VL) Server machine,
266 and every file server machine that houses affected volumes. By convention,
267 a common F<UserList> file is distributed to all database server and file
268 server machines in the cell. See the chapter on privileged users in the
269 I<OpenAFS Administration Guide> for more information on this type of
272 If the B<-localauth> flag is included, the user must instead be logged on
273 as the local superuser C<root> on the server machine where the B<backup>
286 L<backup_adddump(8)>,
287 L<backup_addhost(8)>,
288 L<backup_addvolentry(8)>,
289 L<backup_addvolset(8)>,
290 L<backup_apropos(8)>,
291 L<backup_dbverify(8)>,
292 L<backup_deldump(8)>,
293 L<backup_deletedump(8)>,
294 L<backup_delhost(8)>,
295 L<backup_delvolentry(8)>,
296 L<backup_delvolset(8)>,
297 L<backup_diskrestore(8)>,
299 L<backup_dumpinfo(8)>,
301 L<backup_interactive(8)>,
304 L<backup_labeltape(8)>,
305 L<backup_listdumps(8)>,
306 L<backup_listhosts(8)>,
307 L<backup_listvolsets(8)>,
309 L<backup_readlabel(8)>,
310 L<backup_restoredb(8)>,
312 L<backup_scantape(8)>,
315 L<backup_volinfo(8)>,
316 L<backup_volrestore(8)>,
317 L<backup_volsetrestore(8)>,
323 IBM Corporation 2000. <http://www.ibm.com/> All Rights Reserved.
325 This documentation is covered by the IBM Public License Version 1.0. It was
326 converted from HTML to POD by software written by Chas Williams and Russ
327 Allbery, based on work by Alf Wachsmann and Elizabeth Cassell.