2 * Copyright 2000, International Business Machines Corporation and others.
5 * This software has been released under the terms of the IBM Public
6 * License. For details, see the LICENSE file in the top-level source
7 * directory or online at http://www.openafs.org/dl/license10.html
11 * A general description of the supergroup changes
14 * In AFS users can be members of groups. When you add
15 * a user, u1, to a group, g1, you add the user id for u1
16 * to an entries list in g1. This is a list of all the
18 * You also add the id for g1 to an entries list in u1.
19 * This is a list of all the groups this user is a
21 * The list has room for 10 entries. If more are required,
22 * a continuation record is created.
24 * With UMICH mods, u1 can be a group. When u1 is a group
25 * a new field is required to list the groups this group
26 * is a member of (since the entries field is used to
27 * list it's members). This new field is supergroups and
28 * has two entries. If more are required, a continuation
30 * There are two additional fields required, nextsg is
31 * an address of the next continuation record for this
32 * group, and countsg is the count for the number of
33 * groups this group is a member of.
37 * 09/18/95 jjm Add mdw's changes to afs-3.3a Changes:
38 * (1) Add the parameter -groupdepth or -depth to
39 * define the maximum search depth for supergroups.
40 * Define the variable depthsg to be the value of
41 * the parameter. The default value is set to 5.
43 * (3) Make sure the sizes of the struct prentry and
44 * struct prentryg are equal. If they aren't equal
45 * the pt database will be corrupted.
46 * The error is reported with an fprintf statement,
47 * but this doesn't print when ptserver is started by
48 * bos, so all you see is an error message in the
49 * /usr/afs/logs/BosLog file. If you start the
50 * ptserver without bos the fprintf will print
52 * The program will terminate with a PT_EXIT(1).
55 * Transarc does not currently use opcodes past 520, but
56 * they *could* decide at any time to use more opcodes.
57 * If they did, then one part of our local mods,
58 * ListSupergroups, would break. I've therefore
59 * renumbered it to 530, and put logic in to enable the
60 * old opcode to work (for now).
62 * 2/1/98 jjm Add mdw's changes for bit mapping for supergroups
64 * Before fetching a supergroup, this version of ptserver
65 * checks to see if it was marked "found" and "not a
66 * member". If and only if so, it doesn't fetch the group.
67 * Since this should be the case with most groups, this
68 * should save a significant amount of CPU in redundant
69 * fetches of the same group. After fetching the group,
70 * it sets "found", and either sets or clears "not a
71 * member", depending on if the group was a member of
72 * other groups. When it writes group entries to the
73 * database, it clears the "found" flag.
76 #if defined(SUPERGROUPS)
78 * A general description of the supergroup changes
81 * In AFS users can be members of groups. When you add a user, u1,
82 * to a group, g1, you add the user id for u1 to an entries list
83 * in g1. This is a list of all the members of g1. You also add
84 * the id for g1 to an entries list in u1. This is a list of all
85 * the groups this user is a member of. The list has room for 10
86 * entries. If more are required, a continuation record is created.
88 * With UMICH mods, u1 can be a group. When u1 is a group a new
89 * field is required to list the groups this group is a member of
90 * (since the entries field is used to list it's members). This
91 * new field is supergroups and has two entries. If more are
92 * required, a continuation record is formed.
94 * There are two additional fields required, nextsg is an address
95 * of the next continuation record for this group, and countsg is
96 * the count for the number of groups this group is a member of.
98 * Bit mapping support for supergroups:
100 * Before fetching a supergroup, this version of ptserver checks to
101 * see if it was marked "found" and "not a member". If and only if
102 * so, it doesn't fetch the group. Since this should be the case
103 * with most groups, this should save a significant amount of CPU in
104 * redundant fetches of the same group. After fetching the group, it
105 * sets "found", and either sets or clears "not a member", depending
106 * on if the group was a member of other groups. When it writes
107 * group entries to the database, it clears the "found" flag.
111 #include <afsconfig.h>
112 #include <afs/param.h>
113 #include <afs/stds.h>
118 #include <WINNT/afsevent.h>
123 #include <rx/rx_globals.h>
124 #include <rx/rxstat.h>
127 #include <afs/cellconfig.h>
128 #include <afs/auth.h>
129 #include <afs/keys.h>
130 #include <afs/afsutil.h>
131 #include <afs/audit.h>
132 #include <afs/com_err.h>
134 #include "ptserver.h"
135 #include "ptprototypes.h"
136 #include "error_macros.h"
138 /* make all of these into a structure if you want */
139 struct prheader cheader;
140 struct ubik_dbase *dbase;
141 struct afsconf_dir *prdir;
143 #if defined(SUPERGROUPS)
144 extern afs_int32 depthsg;
153 int rxkadDisableDotCheck = 0;
155 #define ADDRSPERSITE 16 /* Same global is in rx/rx_user.c */
156 afs_uint32 SHostAddrs[ADDRSPERSITE];
158 static struct afsconf_cell info;
160 extern int prp_group_default;
161 extern int prp_user_default;
163 #include "AFS_component_version_number.c"
166 prp_access_mask(char *s)
169 if (*s >= '0' && *s <= '9') {
170 return strtol(s, NULL, 0);
173 while (*s) switch(*s++)
175 case 'S': r |= PRP_STATUS_ANY; break;
176 case 's': r |= PRP_STATUS_MEM; break;
177 case 'O': r |= PRP_OWNED_ANY; break;
178 case 'M': r |= PRP_MEMBER_ANY; break;
179 case 'm': r |= PRP_MEMBER_MEM; break;
180 case 'A': r |= PRP_ADD_ANY; break;
181 case 'a': r |= PRP_ADD_MEM; break;
182 case 'r': r |= PRP_REMOVE_MEM; break;
187 /* check whether caller is authorized to manage RX statistics */
189 pr_rxstat_userok(struct rx_call *call)
191 return afsconf_SuperUser(prdir, call, NULL);
195 main(int argc, char **argv)
201 struct rx_service *tservice;
202 struct rx_securityClass **securityClasses;
203 afs_int32 numClasses;
205 char clones[MAXHOSTSPERCELL];
206 afs_uint32 host = htonl(INADDR_ANY);
208 const char *pr_dbaseName;
209 char *whoami = "ptserver";
214 char *auditFileName = NULL;
218 * The following signal action for AIX is necessary so that in case of a
219 * crash (i.e. core is generated) we can include the user's data section
220 * in the core dump. Unfortunately, by default, only a partial core is
221 * generated which, in many cases, isn't too useful.
223 struct sigaction nsa;
225 sigemptyset(&nsa.sa_mask);
226 nsa.sa_handler = SIG_DFL;
227 nsa.sa_flags = SA_FULLDUMP;
228 sigaction(SIGABRT, &nsa, NULL);
229 sigaction(SIGSEGV, &nsa, NULL);
232 osi_audit(PTS_StartEvent, 0, AUD_END);
234 /* Initialize dirpaths */
235 if (!(initAFSDirPath() & AFSDIR_SERVER_PATHS_OK)) {
237 ReportErrorEventAlt(AFSEVT_SVR_NO_INSTALL_DIR, 0, argv[0], 0);
239 fprintf(stderr, "%s: Unable to obtain AFS server directory.\n",
244 pr_dbaseName = AFSDIR_SERVER_PRDB_FILEPATH;
246 #if defined(SUPERGROUPS)
247 /* make sure the structures for database records are the same size */
248 if ((sizeof(struct prentry) != ENTRYSIZE)
249 || (sizeof(struct prentryg) != ENTRYSIZE)) {
251 "The structures for the database records are different"
252 " sizes\n" "struct prentry = %" AFS_SIZET_FMT "\n"
253 "struct prentryg = %" AFS_SIZET_FMT "\n"
254 "ENTRYSIZE = %d\n", sizeof(struct prentry),
255 sizeof(struct prentryg), ENTRYSIZE);
260 for (a = 1; a < argc; a++) {
262 lcstring(arg, argv[a], sizeof(arg));
264 if (strcmp(argv[a], "-d") == 0) {
265 if ((a + 1) >= argc) {
266 fprintf(stderr, "missing argument for -d\n");
269 debuglevel = atoi(argv[++a]);
270 LogLevel = debuglevel;
271 } else if ((strncmp(arg, "-database", alen) == 0)
272 || (strncmp(arg, "-db", alen) == 0)) {
273 pr_dbaseName = argv[++a]; /* specify a database */
274 } else if (strncmp(arg, "-p", alen) == 0) {
275 lwps = atoi(argv[++a]);
276 if (lwps > 16) { /* maximum of 16 */
277 printf("Warning: '-p %d' is too big; using %d instead\n",
280 } else if (lwps < 3) { /* minimum of 3 */
281 printf("Warning: '-p %d' is too small; using %d instead\n",
285 #if defined(SUPERGROUPS)
286 } else if ((strncmp(arg, "-groupdepth", alen) == 0)
287 || (strncmp(arg, "-depth", alen) == 0)) {
288 depthsg = atoi(argv[++a]); /* Max search depth for supergroups */
290 } else if (strncmp(arg, "-default_access", alen) == 0) {
291 prp_user_default = prp_access_mask(argv[++a]);
292 prp_group_default = prp_access_mask(argv[++a]);
294 else if (strncmp(arg, "-restricted", alen) == 0) {
297 else if (strncmp(arg, "-rxbind", alen) == 0) {
300 else if (strncmp(arg, "-allow-dotted-principals", alen) == 0) {
301 rxkadDisableDotCheck = 1;
303 else if (strncmp(arg, "-enable_peer_stats", alen) == 0) {
304 rx_enablePeerRPCStats();
305 } else if (strncmp(arg, "-enable_process_stats", alen) == 0) {
306 rx_enableProcessRPCStats();
309 else if (strncmp(arg, "-syslog", alen) == 0) {
310 /* set syslog logging flag */
312 } else if (strncmp(arg, "-syslog=", MIN(8, alen)) == 0) {
314 serverLogSyslogFacility = atoi(arg + 8);
317 else if (strncmp(arg, "-auditlog", alen) == 0) {
318 auditFileName = argv[++a];
320 } else if (strncmp(arg, "-audit-interface", alen) == 0) {
321 char *interface = argv[++a];
322 if (osi_audit_interface(interface)) {
323 printf("Invalid audit interface '%s'\n", interface);
327 else if (!strncmp(arg, "-rxmaxmtu", alen)) {
328 if ((a + 1) >= argc) {
329 fprintf(stderr, "missing argument for -rxmaxmtu\n");
332 rxMaxMTU = atoi(argv[++a]);
333 if ((rxMaxMTU < RX_MIN_PACKET_SIZE) ||
334 (rxMaxMTU > RX_MAX_PACKET_DATA_SIZE)) {
335 printf("rxMaxMTU %d invalid; must be between %d-%" AFS_SIZET_FMT "\n",
336 rxMaxMTU, RX_MIN_PACKET_SIZE,
337 RX_MAX_PACKET_DATA_SIZE);
341 else if (*arg == '-') {
342 /* hack in help flag support */
344 #if defined(SUPERGROUPS)
346 printf("Usage: ptserver [-database <db path>] "
347 "[-auditlog <log path>] "
348 "[-audit-interface <file|sysvmq> (default is file)] "
349 "[-syslog[=FACILITY]] [-d <debug level>] "
350 "[-p <number of processes>] [-rebuild] "
351 "[-groupdepth <depth>] "
352 "[-restricted] [-rxmaxmtu <bytes>] [-rxbind] "
353 "[-allow-dotted-principals] "
354 "[-enable_peer_stats] [-enable_process_stats] "
355 "[-default_access default_user_access default_group_access] "
357 #else /* AFS_NT40_ENV */
358 printf("Usage: ptserver [-database <db path>] "
359 "[-auditlog <log path>] "
360 "[-audit-interface <file|sysvmq> (default is file)] "
361 "[-d <debug level>] "
362 "[-p <number of processes>] [-rebuild] [-rxbind] "
363 "[-allow-dotted-principals] "
364 "[-default_access default_user_access default_group_access] "
365 "[-restricted] [-rxmaxmtu <bytes>] [-rxbind] "
366 "[-groupdepth <depth>] " "[-help]\n");
370 printf("Usage: ptserver [-database <db path>] "
371 "[-auditlog <log path>] "
372 "[-audit-interface <file|sysvmq> (default is file)] "
373 "[-d <debug level>] "
374 "[-syslog[=FACILITY]] "
375 "[-p <number of processes>] [-rebuild] "
376 "[-enable_peer_stats] [-enable_process_stats] "
377 "[-default_access default_user_access default_group_access] "
378 "[-restricted] [-rxmaxmtu <bytes>] [-rxbind] "
379 "[-allow-dotted-principals] "
381 #else /* AFS_NT40_ENV */
382 printf("Usage: ptserver [-database <db path>] "
383 "[-auditlog <log path>] [-d <debug level>] "
384 "[-default_access default_user_access default_group_access] "
385 "[-restricted] [-rxmaxmtu <bytes>] [-rxbind] "
386 "[-allow-dotted-principals] "
387 "[-p <number of processes>] [-rebuild] " "[-help]\n");
394 #if defined(SUPERGROUPS)
396 fprintf(stderr, "Unrecognized arg: '%s' ignored!\n", arg);
402 osi_audit_file(auditFileName);
403 osi_audit(PTS_StartEvent, 0, AUD_END);
407 serverLogSyslogTag = "ptserver";
409 OpenLog(AFSDIR_SERVER_PTLOG_FILEPATH); /* set up logging */
412 prdir = afsconf_Open(AFSDIR_SERVER_ETC_DIRPATH);
414 fprintf(stderr, "ptserver: can't open configuration directory.\n");
417 if (afsconf_GetNoAuthFlag(prdir))
418 printf("ptserver: running unauthenticated\n");
421 /* initialize winsock */
422 if (afs_winsockInit() < 0) {
423 ReportErrorEventAlt(AFSEVT_SVR_WINSOCK_INIT_FAILED, 0, argv[0], 0);
425 fprintf(stderr, "ptserver: couldn't initialize winsock. \n");
430 gethostname(hostname, sizeof(hostname));
431 th = gethostbyname(hostname);
433 fprintf(stderr, "ptserver: couldn't get address of this host.\n");
436 memcpy(&myHost, th->h_addr, sizeof(afs_uint32));
438 /* get list of servers */
440 afsconf_GetExtendedCellInfo(prdir, NULL, "afsprot", &info, clones);
442 afs_com_err(whoami, code, "Couldn't get server list");
445 pr_realmName = info.name;
447 /* initialize ubik */
448 ubik_SetClientSecurityProcs(afsconf_ClientAuth, afsconf_UpToDate, prdir);
449 ubik_SetServerSecurityProcs(afsconf_BuildServerSecurityObjects,
450 afsconf_CheckAuth, prdir);
452 /* The max needed is when deleting an entry. A full CoEntry deletion
453 * required removal from 39 entries. Each of which may refers to the entry
454 * being deleted in one of its CoEntries. If a CoEntry is freed its
455 * predecessor CoEntry will be modified as well. Any freed blocks also
456 * modifies the database header. Counting the entry being deleted and its
457 * CoEntry this adds up to as much as 1+1+39*3 = 119. If all these entries
458 * and the header are in separate Ubik buffers then 120 buffers may be
460 ubik_nBuffers = 120 + /*fudge */ 40;
464 if (AFSDIR_SERVER_NETRESTRICT_FILEPATH ||
465 AFSDIR_SERVER_NETINFO_FILEPATH) {
467 ccode = parseNetFiles(SHostAddrs, NULL, NULL,
468 ADDRSPERSITE, reason,
469 AFSDIR_SERVER_NETINFO_FILEPATH,
470 AFSDIR_SERVER_NETRESTRICT_FILEPATH);
473 ccode = rx_getAllAddr(SHostAddrs, ADDRSPERSITE);
476 host = SHostAddrs[0];
477 /* the following call is idempotent so if/when it gets called
478 * again by the ubik init stuff, it doesn't really matter
481 rx_InitHost(host, htons(AFSCONF_PROTPORT));
486 ubik_ServerInitByInfo(myHost, htons(AFSCONF_PROTPORT), &info, clones,
487 pr_dbaseName, &dbase);
489 afs_com_err(whoami, code, "Ubik init failed");
492 #if defined(SUPERGROUPS)
496 afsconf_BuildServerSecurityObjects(prdir, &securityClasses, &numClasses);
498 /* Disable jumbograms */
501 if (rxMaxMTU != -1) {
502 rx_SetMaxMTU(rxMaxMTU);
506 rx_NewServiceHost(host, 0, PRSRV, "Protection Server", securityClasses,
507 numClasses, PR_ExecuteRequest);
508 if (tservice == (struct rx_service *)0) {
509 fprintf(stderr, "ptserver: Could not create new rx service.\n");
512 rx_SetMinProcs(tservice, 2);
513 rx_SetMaxProcs(tservice, lwps);
514 if (rxkadDisableDotCheck) {
515 rx_SetSecurityConfiguration(tservice, RXS_CONFIG_FLAGS,
516 (void *)RXS_CONFIG_FLAGS_DISABLE_DOTCHECK);
520 rx_NewServiceHost(host, 0, RX_STATS_SERVICE_ID, "rpcstats",
521 securityClasses, numClasses, RXSTATS_ExecuteRequest);
522 if (tservice == (struct rx_service *)0) {
523 fprintf(stderr, "ptserver: Could not create new rx service.\n");
526 rx_SetMinProcs(tservice, 2);
527 rx_SetMaxProcs(tservice, 4);
529 /* allow super users to manage RX statistics */
530 rx_SetRxStatUserOk(pr_rxstat_userok);
532 LogCommandLine(argc, argv, "ptserver",
533 #if defined(SUPERGROUPS)
538 "Starting AFS", FSLog);
541 osi_audit(PTS_FinishEvent, -1, AUD_END);