![[Return to Library]](../books.gif)
![[Contents]](../toc.gif)
![[Previous Topic]](../prev.gif)
![[Bottom of Topic]](../bot.gif)
![[Next Topic]](../next.gif)
![[Index]](../index.gif)
Defines client machine interfaces to register with the File Server
Description
The NetInfo file lists the IP addresses of one or more of the local machine's network interfaces. If it exists in the /usr/vice/etc directory when the Cache Manager initializes, the Cache Manager uses its contents as the basis for a list of local interfaces. Otherwise, the Cache Manager uses the list of interfaces configured with the operating system. It then removes from the list any addresses that appear in the /usr/vice/etc/NetRestrict file, if it exists. The Cache Manager records the resulting list in kernel memory. The first time it establishes a connection to a File Server, it registers the list with the File Server.
The File Server uses the addresses when it initiates a remote procedure call (RPC) to the Cache Manager (as opposed to responding to an RPC sent by the Cache Manager). There are two common circumstances in which the File Server initiates RPCs: when it breaks callbacks and when it pings the client machine to verify that the Cache Manager is still accessible.
The NetInfo file is in ASCII format. One of the machine's IP addresses appears on each line, in dotted decimal format. The File Server initially uses the address that appears first in the list. The order of the remaining addresses is not significant: if an RPC to the first interface fails, the File Server simultaneously sends RPCs to all of the other interfaces in the list. Whichever interface replies first is the one to which the File Server then sends pings and RPCs to break callbacks.
To prohibit the Cache Manager absolutely from using one or more addresses, list them in the NetRestrict file. To display the addresses the Cache Manager is currently registering with File Servers, use the fs getclientaddrs command. To replace the current list of interfaces with a new one between reboots of the client machine, use the fs setclientaddrs command.
Related Information
![[Top of Topic]](../top.gif)