=head1 SYNOPSIS
-B<fileserver> [B<-d> <I<debug level>>] [-p <I<number of processes>>]
-[B<-spare> <I<number of spare blocks>>]
- [B<-pctspare> <I<percentage spare>>] [-b <I<buffers>>]
- [B<-l> <I<large vnodes>>] [-s <I<small nodes>>]
- [B<-vc> <I<volume cachesize>>] [-w <I<call back wait interval>>]
- [-cb <I<number of call backs>>]
- [-banner (print banner every 10 minutes)]
- [-novbc (whole volume cbs disabled)]
- [-implicit <I<admin mode bits: rlidwka>>]
- [-hr <I<number of hours between refreshing the host cps>>]
- [-busyat <I<redirect clients when queue > n>>]
- [-rxpck <I<number of rx extra packets>>]
- [-rxdbg (enable rx debugging)]
- [-rxdbge (enable rxevent debugging)]
- [-m <I<min percentage spare in partition>>]
- [-lock (keep fileserver from swapping)]
- [B<-L> (large server conf)] [-S (small server conf)]
- [B<-k> <I<stack size>>] [-realm <I<Kerberos realm name>>]
- [-udpsize <I<size of socket buffer in bytes>>]
- [B<-enable_peer_stats>] [-enable_process_stats]
- [-help]
-
-This command does not use the syntax conventions of the AFS command
-suites. Provide the command name and all option names in full.
+B<fileserver> [B<-d> <I<debug level>>] [B<-p> <I<number of processes>>]
+ [B<-spare> <I<number of spare blocks>>]
+ [B<-pctspare> <I<percentage spare>>] [B<-b> <I<buffers>>]
+ [B<-l> <I<large vnodes>>] [B<-s> <I<small nodes>>]
+ [B<-vc> <I<volume cachesize>>] [B<-w> <I<call back wait interval>>]
+ [B<-cb> <I<number of call backs>>] [B<-banner>] [B<-novbc>]
+ [B<-implicit> <I<admin mode bits: rlidwka>>]
+ [B<-hr> <I<number of hours between refreshing the host cps>>]
+ [B<-busyat> <I<< redirect clients when queue > n >>>]
+ [B<-rxpck> <I<number of rx extra packets>>]
+ [B<-rxdbg>] [B<-rxdbge>] [B<-m> <I<min percentage spare in partition>>]
+ [B<-lock>] [B<-L>] [B<-S>] [B<-k> <I<stack size>>]
+ [B<-realm> <I<Kerberos realm name>>]
+ [B<-udpsize> <I<size of socket buffer in bytes>>]
+ [B<-enable_peer_stats>] [B<-enable_process_stats>] [B<-help>]
=head1 DESCRIPTION
-The fileserver command initializes the File Server component of
-the B<fs> process. In the conventional configuration, its
-binary file is located in the B</usr/afs/bin> directory on a file
-server machine.
+The B<fileserver> command initializes the File Server component of the
+C<fs> process. In the conventional configuration, its binary file is
+located in the F</usr/afs/bin> directory on a file server machine.
-The fileserver command is not normally issued at the command
-shell prompt, but rather placed into a database server machine's
-B</usr/afs/local/BosConfig> file with the B<bos create>
-command. If it is ever issued at the command shell prompt, the issuer
-must be logged onto a file server machine as the local superuser
-B<root>.
+The B<fileserver> command is not normally issued at the command shell
+prompt, but rather placed into a database server machine's
+F</usr/afs/local/BosConfig> file with the B<bos create> command. If it is
+ever issued at the command shell prompt, the issuer must be logged onto a
+file server machine as the local superuser C<root>.
-The File Server creates the /usr/afs/logs/FileLog log file as it
+The File Server creates the F</usr/afs/logs/FileLog> log file as it
initializes, if the file does not already exist. It does not write a
-detailed trace by default, but use the B<-d> option to increase the
-amount of detail. Use the B<bos getlog> command to display the
-contents of the log file.
-
-The command's arguments enable the administrator to control many
-aspects of the File Server's performance, as detailed in the
-B<Options> section. By default the B<fileserver>
-command sets values for many arguments that are suitable for a medium-sized
-file server machine. To set values suitable for a small or large file
-server machine, use the B<-S> or B<-L> flag
+detailed trace by default, but use the B<-d> option to increase the amount
+of detail. Use the B<bos getlog> command to display the contents of the
+log file.
+
+The command's arguments enable the administrator to control many aspects
+of the File Server's performance, as detailed in L<OPTIONS>. By default
+the B<fileserver> command sets values for many arguments that are suitable
+for a medium-sized file server machine. To set values suitable for a small
+or large file server machine, use the B<-S> or B<-L> flag
respectively. The following list describes the parameters and
-corresponding argument for which the B<fileserver> command sets
-default values, and L<Table_1(1)> summarizes the setting for each of the three machine
-sizes.
+corresponding argument for which the B<fileserver> command sets default
+values, and the table below summarizes the setting for each of the three
+machine sizes.
=over 4
=item *
The maximum number of lightweight processes (LWPs) the File Server uses to
-handle requests for data; corresponds to the B<-p>
-argument. The File Server always uses a minimum of 32 KB for these
-processes.
-
+handle requests for data; corresponds to the B<-p> argument. The File
+Server always uses a minimum of 32 KB for these processes.
=item *
-The maximum number of directory blocks the File Server caches in
-memory; corresponds to the B<-b> argument. Each cached
-directory block (buffer) consumes 2,092 bytes of memory.
-
+The maximum number of directory blocks the File Server caches in memory;
+corresponds to the B<-b> argument. Each cached directory block (buffer)
+consumes 2,092 bytes of memory.
=item *
The maximum number of large vnodes the File Server caches in memory for
-tracking directory elements; corresponds to the B<-l>
-argument. Each large vnode consumes 292 bytes of memory.
-
+tracking directory elements; corresponds to the B<-l> argument. Each large
+vnode consumes 292 bytes of memory.
=item *
The maximum number of small vnodes the File Server caches in memory for
-tracking file elements; corresponds to the B<-s> argument.
-Each small vnode consumes 100 bytes of memory.
-
+tracking file elements; corresponds to the B<-s> argument. Each small
+vnode consumes 100 bytes of memory.
=item *
Server can cache in memory before having to retrieve data from disk;
corresponds to the B<-vc> argument.
-
=item *
The maximum number of callback structures the File Server caches in
-memory; corresponds to the B<-cb> argument. Each callback
-structure consumes 16 bytes of memory.
-
+memory; corresponds to the B<-cb> argument. Each callback structure
+consumes 16 bytes of memory.
=item *
-The maximum number of Rx packets the File Server uses;
-corresponds to the B<-rxpck> argument. Each packet consumes
-1544 bytes of memory.
-
+The maximum number of Rx packets the File Server uses; corresponds to the
+B<-rxpck> argument. Each packet consumes 1544 bytes of memory.
=back
-L<Table 1. File Server configuration parameters(1)>
+The default values are:
-To override any of the values, provide the indicated argument (which can be
-combined with the B<-S> or B<-L> flag).
+ Parameter (Argument) Small (-S) Medium Large (-L)
+ ---------------------------------------------------------------------
+ Number of LWPs (-p) 6 9 12
+ Number of cached dir blocks (-b) 70 90 120
+ Number of cached large vnodes (-l) 200 400 600
+ Number of cached small vnodes (-s) 200 400 600
+ Maximum volume cache size (-vc) 200 400 600
+ Number of callbacks (-cb) 20,000 60,000 64,000
+ Number of Rx packets (-rxpck) 100 150 200
-The amount of memory required for the File Server varies. The
-approximate default memory usage is 751 KB when the B<-S> flag is used
-(small configuration), 1.1 MB when all defaults are used (medium
-configuration), and 1.4 MB when the B<-L> flag is used (large
-configuration). If additional memory is available, increasing the value
-of the B<-cb> and B<-vc> arguments can improve File Server
-performance most directly.
+To override any of the values, provide the indicated argument (which can
+be combined with the B<-S> or B<-L> flag).
+
+The amount of memory required for the File Server varies. The approximate
+default memory usage is 751 KB when the B<-S> flag is used (small
+configuration), 1.1 MB when all defaults are used (medium configuration),
+and 1.4 MB when the B<-L> flag is used (large configuration). If
+additional memory is available, increasing the value of the B<-cb> and
+B<-vc> arguments can improve File Server performance most directly.
By default, the File Server allows a volume to exceed its quota by 1 MB
-when an application is writing data to an existing file in a volume that is
-full. The File Server still does not allow users to create new files in
-a full volume. To change the default, use one of the following
-arguments:
-L<(1)>
+when an application is writing data to an existing file in a volume that
+is full. The File Server still does not allow users to create new files in
+a full volume. To change the default, use one of the following arguments:
=over 4
=item *
-Set the -spare argument to the number of extra kilobytes that
-the File Server allows as overage. A value of B<0> allows no
-overage.
-
+Set the B<-spare> argument to the number of extra kilobytes that the File
+Server allows as overage. A value of C<0> allows no overage.
=item *
-Set the -pctspare argument to the percentage of the
-volume's quota the File Server allows as overage.
-
+Set the B<-pctspare> argument to the percentage of the volume's quota the
+File Server allows as overage.
=back
-By default, the File Server implicitly grants the a
-(B<administer>) and B<l> (B<lookup>) permissions to
-the B<system:administrators> on the access control list (ACL) of
-every directory in the volumes stored on its file server machine. In
-other words, the group's members can exercise those two permissions even
-when an entry for the group does not appear on an ACL. To change the
-set of default permissions, use the B<-implicit> argument.
-
-The File Server maintains a I<host current protection subgroup>
-(I<host CPS>) for each client machine from which it has received a
-data access request. Like the CPS for a user, a host CPS lists all of
-the Protection Database groups to which the machine belongs, and the File
-Server compares the host CPS to a directory's ACL to determine in what
-manner users on the machine are authorized to access the directory's
-contents. When the B<pts adduser> or B<pts removeuser>
-command is used to change the groups to which a machine belongs, the File
-Server must recompute the machine's host CPS in order to notice the
-change. By default, the File Server contacts the Protection Server
-every two hours to recompute host CPSs, implying that it can take that long
-for changed group memberships to become effective. To change this
-frequency, use the B<-hr> argument.
+By default, the File Server implicitly grants the C<a> (administer) and
+C<l> (lookup) permissions to system:administrators on the access control
+list (ACL) of every directory in the volumes stored on its file server
+machine. In other words, the group's members can exercise those two
+permissions even when an entry for the group does not appear on an ACL. To
+change the set of default permissions, use the B<-implicit> argument.
+
+The File Server maintains a I<host current protection subgroup> (I<host
+CPS>) for each client machine from which it has received a data access
+request. Like the CPS for a user, a host CPS lists all of the Protection
+Database groups to which the machine belongs, and the File Server compares
+the host CPS to a directory's ACL to determine in what manner users on the
+machine are authorized to access the directory's contents. When the B<pts
+adduser> or B<pts removeuser> command is used to change the groups to
+which a machine belongs, the File Server must recompute the machine's host
+CPS in order to notice the change. By default, the File Server contacts
+the Protection Server every two hours to recompute host CPSs, implying
+that it can take that long for changed group memberships to become
+effective. To change this frequency, use the B<-hr> argument.
The File Server generates the following message when a partition is nearly
full:
No space left on device
+This command does not use the syntax conventions of the AFS command
+suites. Provide the command name and all option names in full.
+
=head1 CAUTIONS
-Do not use the B<-k> and -w arguments, which are
-intended for use by the AFS Development group only. Changing them from
-their default values can result in unpredictable File Server behavior.
-In any case, on many operating systems the File Server uses native threads
-rather than the LWP threads, so using the B<-k> argument to set the
-number of LWP threads has no effect.
+Do not use the B<-k> and -w arguments, which are intended for use by the
+AFS Development group only. Changing them from their default values can
+result in unpredictable File Server behavior. In any case, on many
+operating systems the File Server uses native threads rather than the LWP
+threads, so using the B<-k> argument to set the number of LWP threads has
+no effect.
-Do not specify both the B<-spare> and -pctspare
-arguments. Doing so causes the File Server to exit, leaving an error
-message in the B</usr/afs/logs/FileLog> file.
+Do not specify both the B<-spare> and B<-pctspare> arguments. Doing so
+causes the File Server to exit, leaving an error message in the
+F</usr/afs/logs/FileLog> file.
-Options that are available only on some system types, such as the
-B<-m> and B<-lock> options, appear in the output generated by
-the B<-help> option only on the relevant system type.
+Options that are available only on some system types, such as the B<-m>
+and B<-lock> options, appear in the output generated by the B<-help>
+option only on the relevant system type.
=head1 OPTIONS
=over 4
-=item -d
+=item B<-d> <I<debug level>>
Sets the detail level for the debugging trace written to the
-B</usr/afs/logs/FileLog> file. Provide one of the following
-values, each of which produces an increasingly detailed trace:
-B<0>, B<1>, B<5>, B<25>, and
-B<125>. The default value of B<0> produces only a few
-messages.
+F</usr/afs/logs/FileLog> file. Provide one of the following values, each
+of which produces an increasingly detailed trace: C<0>, C<1>, C<5>, C<25>,
+and C<125>. The default value of C<0> produces only a few messages.
-=item -p
+=item B<-p> <I<number of processes>>
-Sets the number of threads to run. Provide a positive
-integer. The File Server creates and uses five threads for special
-purposes, in addition to the number specified (but if this argument specifies
-the maximum possible number, the File Server automatically uses five of the
-threads for its own purposes).
+Sets the number of threads to run. Provide a positive integer. The File
+Server creates and uses five threads for special purposes, in addition to
+the number specified (but if this argument specifies the maximum possible
+number, the File Server automatically uses five of the threads for its own
+purposes).
-The maximum number of threads can differ in each release of AFS.
-Consult the I<IBM AFS Release Notes> for the current release.
+The maximum number of threads can differ in each release of AFS. Consult
+the I<IBM AFS Release Notes> for the current release.
-=item -spare
+=item B<-spare> <I<number of spare blocks>>
Specifies the number of additional kilobytes an application can store in a
-volume after the quota is exceeded. Provide a positive integer; a
-value of B<0> prevents the volume from ever exceeding its
-quota. Do not combine this argument with the B<-pctspare>
-argument.
+volume after the quota is exceeded. Provide a positive integer; a value of
+C<0> prevents the volume from ever exceeding its quota. Do not combine
+this argument with the B<-pctspare> argument.
-=item -pctspare
+=item B<-pctspare> <I<percentage spare>>
Specifies the amount by which the File Server allows a volume to exceed
-its quota, as a percentage of the quota. Provide an integer between
-B<0> and B<99>. A value of B<0> prevents the
-volume from ever exceeding its quota. Do not combine this argument with
-the B<-spare> argument.
+its quota, as a percentage of the quota. Provide an integer between C<0>
+and C<99>. A value of C<0> prevents the volume from ever exceeding its
+quota. Do not combine this argument with the B<-spare> argument.
-=item -b
+=item B<-b> <I<buffers>>
-Sets the number of directory buffers. Provide a positive
-integer.
+Sets the number of directory buffers. Provide a positive integer.
-=item -l
+=item B<-l> <I<large vnodes>>
Sets the number of large vnodes available in memory for caching directory
elements. Provide a positive integer.
-=item -s
+=item B<-s> <I<small nodes>>
Sets the number of small vnodes available in memory for caching file
elements. Provide a positive integer.
-=item -vc
+=item B<-vc> <I<volume cachesize>>
-Sets the number of volumes the File Server can cache in memory.
-Provide a positive integer.
+Sets the number of volumes the File Server can cache in memory. Provide a
+positive integer.
-=item -w
+=item B<-w> <I<call back wait interval>>
Sets the interval at which the daemon spawned by the File Server performs
-its maintenance tasks. Do not use this argument; changing the
-default value can cause unpredictable behavior.
+its maintenance tasks. Do not use this argument; changing the default
+value can cause unpredictable behavior.
-=item -cb
+=item B<-cb> <I<number of callbacks>>
-Sets the number of callbacks the File Server can track. Provide a
-positive integer.
+Sets the number of callbacks the File Server can track. Provide a positive
+integer.
-=item -banner
+=item B<-banner>
-Prints the following banner to /dev/console about every 10
-minutes.
+Prints the following banner to F</dev/console> about every 10 minutes.
File Server is running at I<time>.
-=item -novbc
+=item B<-novbc>
Prevents the File Server from breaking the callbacks that Cache Managers
hold on a volume that the File Server is reattaching after the volume was
-offline (as a result of the B<vos restore> command, for
-example). Use of this flag is strongly discouraged.
+offline (as a result of the B<vos restore> command, for example). Use of
+this flag is strongly discouraged.
-=item -implicit
+=item B<-implicit> <I<admin mode bits>>
Defines the set of permissions granted by default to the
-B<system:administrators> group on the ACL of every directory in
-a volume stored on the file server machine. Provide one or more of the
-standard permission letters (B<rlidwka>) and auxiliary permission
-letters (B<ABCDEFGH>), or one of the shorthand notations for groups of
-permissions (B<all>, B<none>, B<read>, and
-B<write>). To review the meaning of the permissions, see the
-B<fs setacl> reference page.
+system:administrators group on the ACL of every directory in a volume
+stored on the file server machine. Provide one or more of the standard
+permission letters (C<rlidwka>) and auxiliary permission letters
+(C<ABCDEFGH>), or one of the shorthand notations for groups of permissions
+(C<all>, C<none>, C<read>, and C<write>). To review the meaning of the
+permissions, see the B<fs setacl> reference page.
-=item -hr
->
+=item B<-hr> <I<number of hours between refreshing the host cps>>
Specifies how often the File Server refreshes its knowledge of the
machines that belong to protection groups (refreshes the host CPSs for
from machines recently added to protection groups to access data for which
those machines now have the necessary ACL permissions.
-=item -busyat
+=item B<-busyat> <I<< redirect clients when queue > n >>>
Defines the number of incoming RPCs that can be waiting for a response
from the File Server before the File Server returns the error code
-B<VBUSY> to the Cache Manager that sent the latest RPC. In
-response, the Cache Manager retransmits the RPC after a delay. This
-argument prevents the accumulation of so many waiting RPCs that the File
-Server can never process them all. Provide a positive integer.
-The default value is 600.
+C<VBUSY> to the Cache Manager that sent the latest RPC. In response, the
+Cache Manager retransmits the RPC after a delay. This argument prevents
+the accumulation of so many waiting RPCs that the File Server can never
+process them all. Provide a positive integer. The default value is
+C<600>.
-=item -rxpck
+=item B<-rxpck> <I<number of rx extra packets>>
Controls the number of Rx packets the File Server uses to store data for
-incoming RPCs that it is currently handling, that are waiting for a response,
-and for replies that are not yet complete. Provide a positive
+incoming RPCs that it is currently handling, that are waiting for a
+response, and for replies that are not yet complete. Provide a positive
integer.
-=item -rxdbg
+=item B<-rxdbg>
-Writes a trace of the File Server's operations on Rx packets to the
-file B</usr/afs/logs/rx_dbg>.
+Writes a trace of the File Server's operations on Rx packets to the file
+F</usr/afs/logs/rx_dbg>.
-=item -rxdbge
+=item F<-rxdbge>
Writes a trace of the File Server's operations on Rx events (such as
-retransmissions) to the file B</usr/afs/logs/rx_dbg>.
+retransmissions) to the file F</usr/afs/logs/rx_dbg>.
-=item -m
+=item F<-m> <I<min percentage spare in partition>>
Specifies the percentage of each AFS server partition that the AIX version
-of the File Server creates as a reserve. Specify an integer value
-between B<0> and B<30>; the default is 8%. A value
-of B<0> means that the partition can become completely full, which can
-have serious negative consequences.
+of the File Server creates as a reserve. Specify an integer value between
+C<0> and C<30>; the default is 8%. A value of C<0> means that the
+partition can become completely full, which can have serious negative
+consequences.
-=item -lock
+=item B<-lock>
-Prevents any portion of the fileserver binary from being paged
-(swapped) out of memory on a file server machine running the IRIX operating
-system.
+Prevents any portion of the fileserver binary from being paged (swapped)
+out of memory on a file server machine running the IRIX operating system.
-=item -L
->
+=item B<-L>
Sets values for many arguments in a manner suitable for a large file
-server machine. Combine this flag with any option except the
-B<-S> flag; omit both flags to set values suitable for a
-medium-sized file server machine.
+server machine. Combine this flag with any option except the B<-S> flag;
+omit both flags to set values suitable for a medium-sized file server
+machine.
-=item -S
->
+=item B<-S>
Sets values for many arguments in a manner suitable for a small file
-server machine. Combine this flag with any option except the
-B<-L> flag; omit both flags to set values suitable for a
-medium-sized file server machine.
+server machine. Combine this flag with any option except the B<-L> flag;
+omit both flags to set values suitable for a medium-sized file server
+machine.
-=item -k
+=item B<-k> <I<stack size>>
-Sets the LWP stack size in units of 1 kilobyte. Do not use this
-argument, and in particular do not specify a value less than the default of
-24.
+Sets the LWP stack size in units of 1 kilobyte. Do not use this argument,
+and in particular do not specify a value less than the default of C<24>.
-=item -realm
+=item B<-realm> <I<Kerberos realm name>>
Defines the Kerberos realm name for the File Server to use. If this
argument is not provided, it uses the realm name corresponding to the cell
-listed in the local B</usr/afs/etc/ThisCell> file.
+listed in the local F</usr/afs/etc/ThisCell> file.
-=item -udpsize
+=item B<-udpsize> <I<size of socket buffer in bytes>>
-Sets the size of the UDP buffer, which is 64 KB by default. Provide
-a positive integer, preferably larger than the default.
+Sets the size of the UDP buffer, which is 64 KB by default. Provide a
+positive integer, preferably larger than the default.
-=item -enable_peer_stats
+=item B<-enable_peer_stats>
Activates the collection of Rx statistics and allocates memory for their
-storage. For each connection with a specific UDP port on another
-machine, a separate record is kept for each type of RPC (FetchFile, GetStatus,
-and so on) sent or received. To display or otherwise access the
-records, use the Rx Monitoring API.
+storage. For each connection with a specific UDP port on another machine,
+a separate record is kept for each type of RPC (FetchFile, GetStatus, and
+so on) sent or received. To display or otherwise access the records, use
+the Rx Monitoring API.
-=item -enable_process_stats
+=item B<-enable_process_stats>
Activates the collection of Rx statistics and allocates memory for their
storage. A separate record is kept for each type of RPC (FetchFile,
other machines. To display or otherwise access the records, use the Rx
Monitoring API.
-=item -help
+=item B<-help>
-Prints the online help for this command. All other valid options
-are ignored.
+Prints the online help for this command. All other valid options are
+ignored.
=back
=head1 EXAMPLES
-The following B<bos create> command creates an fs
-process on the file server machine B<fs2.abc.com> that
-uses the large configuration size, and allows volumes to exceed their quota by
-10%. Type the command on a single line:
+The following B<bos create> command creates an fs process on the file
+server machine C<fs2.abc.com> that uses the large configuration size, and
+allows volumes to exceed their quota by 10%. Type the command on a single
+line:
- % bos create -server fs2.abc.com -instance fs -type fs \
+ % bos create -server fs2.abc.com -instance fs -type fs \
-cmd "/usr/afs/bin/fileserver -pctspare 10 \
-L" /usr/afs/bin/volserver /usr/afs/bin/salvager
=head1 PRIVILEGE REQUIRED
-The issuer must be logged in as the superuser root on a file
-server machine to issue the command at a command shell prompt. It is
-conventional instead to create and start the process by issuing the B<bos
-create> command.
+The issuer must be logged in as the superuser C<root> on a file server
+machine to issue the command at a command shell prompt. It is conventional
+instead to create and start the process by issuing the B<bos create>
+command.
=head1 SEE ALSO
-L<BosConfig(1)>,
-L<FileLog(1)>,
-L<bos_create(1)>,
-L<bos_getlog(1)>,
+L<BosConfig(5)>,
+L<FileLog(5)>,
+L<bos_create(8)>,
+L<bos_getlog(8)>,
L<fs_setacl(1)>,
-L<salvager(1)>,
-L<volserver(1)>
+L<salvager(8)>,
+L<volserver(8)>
=head1 COPYRIGHT