-This file is a rough list of known issues with the 1.3.72 release of OpenAFS
+This file is a rough list of known issues with the 1.3.87 release of OpenAFS
on Windows. This list is not complete. There are probably other issues
which can be found in the RT database or on the mailing list.
(3a) IP address changes cause the service to terminate due to an assertion
in smb_Listener() thread.
-(3b) New IP addresses do not get bound
+(3b) New IP addresses do not get bound to the SMB server
(3c) Loopback adapter hack:
(i) prevents use of AFS Gateway
(iii) the list of hack adapters is incomplete (VMWare, MS TV/Video, ...)
(iv) incompatible with Windows 2000 and earlier
-(4) Performance of the AFS Client Service code simply sucks. The average
-read, write, and delete times for AFS are more than ten times slower than
-the equivalent Windows File Share operations. The Window File Share operations
-are not all that fast. It has been claimed that the Windows AFS functions are
-one hundred times slower than the equivalent operations on Linux. I would not
-be at all surprised. The best we can do without rewriting AFS as a IFS would
-be to match the Windows File Share performance. I believe the threading model
-is imposing significant delays in the movement of data from between the SMB
-and RX protocol operations. There was also an issue with large numbers of
-page faults which have since been fixed.
-
-(7) File termination differences between Win9x and nt/w2k/xp (Jim Peterson)
-
-(8) How to silence "Explorer" when the mapped drive is not available?
-
(9) Convert to IFS!!!!!!
(10) Kerberos 5 integration:
(12c) If network is not available must store the username and password
somewhere until such time as the network starts.
-(13) Loopback adapter is not always installed with bindings to "File and
- Printer Sharing for Microsoft Networks" or "Client for Microsoft
- Networks". If these are not bound then SMB names will successfully
+(13) Loopback adapter is not always installed without bindings to "File and
+ Printer Sharing for Microsoft Networks" and with bindings to "Client for Microsoft
+ Networks". If these are not bound correct then SMB names will successfully
be published to a list of zero which causes the AFS not to function.
We need a way to test whether the Loopback adapter is properly bound
so we know if it is safe to use. Actually, it is worse. Even with
[Actually, an end user should not be able to modify the submount list]
-(15) Drive mappings are lost on WinXP after return from Standby. (This could
- be because the AFS Client Service fails OR because the RX protocol is
- temporarily unable to access the Cell due to network restore timing
- issues.)
-
(16) No support for Unicode CIFS/SMB data structures. OEM Code Pages prevent
the use of interoperable file names; force the use of paths no longer
than 256 characters; force share names to be no longer than 13
and per-machine settings. All of the new registry items need to
be added to the UI
-(25) Thread initialization versus Global Drive Mapping. There is no
- mechanism in the afsd_init.c to ensure that all of the threads
- complete initializing in the correct sequence. In the case of
- Global Drive Maps this is a problem because the Global Drive Maps
- can be executed prior to the completion of the SMB registration
- and service thread initialization.
-
-(26) CIFS Remote Administration Protocol implementation is incomplete.
+(25) CIFS Remote Administration Protocol implementation is incomplete.
Notifications are not made to requestors when the view of a file
or folder changes due to token acquisition; token expiration; or
token destruction
-(27) The Cache Manager Flush routines do not return or check error
- codes.
-
-(28) Remove submount creation as a side effect of AFS drive mapping.
+(26) Remove submount creation as a side effect of AFS drive mapping.
The AFS Submount is effectively a server side alias for a path
located in the AFS space. This alias is exported by the AFS
or by the new AFS Client Service Administration tool when executed
by an authorized user.
-(29) Add support for multi-homed servers
-
+(27) No support for byte range locking (or locking at all)
-------------------------------------------------------------------------
List of unfunded projects:
1. No longer use AFS Client Service "cell" as the default cell for individual users
- 2. Re-write afsd_service.exe to perform synchronized thread startup and shutdown.
- Currently there is no synchronization of thread creation which results in timing
- conflicts; and there is no attempt to cleanly shutdown the service which causes
- problems when restarting and prevents the implementation of a persistent cache
- 3. Implement a persistent cache (requires item 2)
- 4. Prevent panic situation when the root.afs volume is not reachable and
+ 2. Prevent panic situation when the root.afs volume is not reachable and
the AFS Client Server is not using Freelance mode
- 5. Prevent panic situation when the IP address to which the SMB server is bound is removed
+ 3. Prevent panic situation when the IP address to which the SMB server is bound is removed
from the local machine's network configuration
- 6. Add support for Named Pipes within the afs filesystem
+ 4. Add support for Named Pipes within the afs filesystem
(This is not currently a supported feature of AFS; it will require
changes to the servers as well as the clients.)
- 7. Re-write afscreds.exe to support:
+ 5. Re-write afscreds.exe to support:
1. choosing between Kerberos 5 and Kerberos 4 on a per principal basis
2. providing users with the ability to map multiple cells to a single principal
3. providing change password functionality on a per principal basis
4. no longer include drive mapping
5. configuration of afscreds startup options in shortcut
- 8. Re-write afs_config.exe to be only "per user" functionality which does not require admin
+ 6. Re-write afs_config.exe to be only "per user" functionality which does not require admin
privileges
1. default cell and principal for the user
2. drive mappings but no submounts
3. visibility of afs creds and setting of afs creds startup options
- 9. Create new afs_admin.exe tool to be installed in the administrator folder (or use MMS)
+ 7. Create new afs_admin.exe tool to be installed in the administrator folder (or use MMS)
which contains
1. afs client service cell name
2. integrated logon configuration
11. network configuration
12. miscellaneous
13. need to add support for all of the new registry values since 1.2.8
- 10. Identify why 16-bit DOS applications executed out of AFS fail
- 11. Add support for configurable Icon file representing AFS folders within the Explorer Shell
- 12. Documentation Documentation Documentation
- 13. Large File support (> 2GB) in SMB/CIFS client
- 14. Integrate KFW installation into the NSIS and MSI installers
- 15. Add support for record locking to AFS (requires changes to the servers)
- 16. Unicode enable the SMB/CIFS server. OEM Code Pages:
+ 8. Identify why 16-bit DOS applications executed out of AFS fail
+ 9. Add support for configurable Icon file representing AFS folders within the Explorer Shell
+ 10. Documentation Documentation Documentation
+ 11. Large File support (> 2GB) in SMB/CIFS client
+ 12. Integrate KFW installation into the NSIS and MSI installers
+ 13. Add support for byte range locking to AFS (requires changes to the servers)
+ 13a. Simulate support for byte range locking at the client; use full locks
+ on the server.
+ 14. Unicode enable the SMB/CIFS server. OEM Code Pages:
1. prevent the use of interoperable file names
2. force the use of paths no longer than 256 characters
3. force share names to be no longer than 13 characters
4. restrict authentication to ASCII only names and passwords
- 17. Complete implementation of CIFS Remote Administration Protocol
- 19. Add support for SMB/CIFS Digital Signatures
- 19. Development of afsmap.exe tool to provide AFS aware NET USE functionality
+ 15. Complete implementation of CIFS Remote Administration Protocol
+ 16. Add support for SMB/CIFS Digital Signatures
+ 17. Development of afsmap.exe tool to provide AFS aware NET USE functionality
afsmap.exe <drive> <afs-path> [/PERSISTENT]
afsmap.exe <drive> <unc-path> [/PERSISTENT]
afsmap.exe <drive> /DELETE
- 20. Missing SMB/CIFS functions:
+ 18. Missing SMB/CIFS functions:
Find
FindUnique
FindClose
WriteBulk
WriteBulkData
Tran2::SessionSetup
- 21. StoreBehind mode is not implemented. Or more correctly, all data is
+ 19. StoreBehind mode is not implemented. Or more correctly, all data is
written directly to the server and is not cached. Writes invalidate
the local cache entries which are then read back from the server.
- 22. The Power Management Flush Cache code does not work on Terminal
- Server nor does it always successfully flush all of the dirty buffers
- to the AFS servers before suspend/hibernate operations occur.
- 23. Develop an optional Installable File System replacement for the SMB/CIFS
+ 20. Develop an optional Installable File System replacement for the SMB/CIFS
Server.
- 24. Add support for storing Extended Attributes on files
- 25. Add support for storing Windows ACLs on files
- 26. Remove submount creation as a side effect of drive creation
- 27. Finish conversion from string.h to strsafe.h for VS.NET 2005
- 28. Add support for multi-homed servers
+ 21. Add support for storing Extended Attributes on files
+ 22. Add support for storing Windows ACLs on files
+ 23. Remove submount creation as a side effect of drive creation
+ 24. Finish conversion from string.h to strsafe.h for VS.NET 2005
git://git.openafs.org / openafs.git / blobdiff