Variable: smb_LogoffTokenTransfer
If enabled (set to 1), activates functionality where the user's
- tokens are kept intact until smb_LogofTokenTransferTimeout seconds
+ tokens are kept intact until smb_LogoffTokenTransferTimeout seconds
elapse after user logs off. If roaming profiles are used and the
roaming profile takes a long time to be written back, this ensures
that the tokens remain valid until the profile save is complete.
Default : "\AFSCache"
Variable: cm_CachePath
- Location of on-disk cache file.
+ Location of on-disk cache file. The default implies the root
+ directory of the boot disk
Value : TrapOnPanic
Type : DWORD {1,0}
Issues a breakpoint in the event of a panic. (breakpoint: _asm int 3).
+Value : NetbiosName
+Type : REG_EXPAND_SZ
+Default : "AFS"
+Variable: cm_NetbiosName
+
+ Specifies the NetBIOS name to be used when binding to a Loopback
+ adapter. To provide the old behavior specify a value of
+ "%COMPUTERNAME%-AFS"
+
Value : IsGateway
Type : DWORD {1,0}
Default : 0
Select whether or not this AFS client should act as a gateway. If
set and the NetBIOS name hostname-AFS is bound to a physical NIC,
other machines in the subnet can access AFS via SMB connections to
- hostname-AFS .
+ hostname-AFS.
+
+ When IsGateway is non-zero, the LAN adapter detection code will
+ avoid binding to a loopback adapter. This will ensure that the
+ NetBIOS name will be of the form hostname-AFS instead of the value
+ set by the "NetbiosName" registry value.
Value : ReportSessionStartups
Type : DWORD {1,0}
Variable: reportSessionStartups
If enabled, all SMB sessions created are recorded in the Application
- event log.
+ event log. This also enables other events such as drive mappings
+ or various error types to be logged.
Value : TraceBufferSize
Type : QWORD
Variable: cm_dnsEnabled
Enables resolving volservers using AFSDB DNS queries. (see
- afsdb-freelance-notes)
+ afsdb-freelance-notes).
+
+ As of 1.3.60, this value is ignored as the DNS query support
+ utilizes the Win32 DNSQuery API which is available on Win2000
+ and above.
Value : FreelanceClient
Type : DWORD {1,0}
If set to anything other than -1, uses that value as the maximum MTU
supported by the RX interface.
+ In order to enable OpenAFS to operate across the Cisco IPSec VPN
+ client, this value must be set to 1264 or smaller.
+
+Value : AllSubmount
+Type : DWORD {0, 1}
+Default : 1
+Variable: allSubmount (smb.c)
+
+ By setting this value to 0, the "\\NetbiosName\all" mount point
+ will not be created. This allows the read-write versions of
+ root.afs to be hidden.
+
+
+Regkey:
+[HKLM\SYSTEM\CurrentControlSet\Services\TransarcAFSDaemon\NetworkProvider]
+
+
2. Network provider parameters
------------------------------
Affects the network provider (aklogon.dll).
Type : DWORD
Default : 0
-Do not display message boxes if the login fails.
+ Do not display message boxes if the login fails.
Regkey:
[HKLM\SYSTEM\CurrentControlSet\Services\TransarcAFSDaemon\NetworkProvider]
Type : DWORD
Default : 0
-Disables visible warnings during logon.
+ Disables visible warnings during logon.
+
+Value : AuthentProviderPath
+Type : REG_SZ
+NSIS : <install path>\afslogon.dll
+
+ Specifies the install location of the authentication provider dll.
+
+Value : Class
+Type : DWORD
+NSIS : 0x02
+
+ Specifies the class of network provider
+
+Value : DependOnGroup
+Type : REG_MULTI_SZ
+NSIS : PNP_TDI
+
+ Specifies the service groups upon which the AFS Client Service
+ depends. Windows should not attempt to start the AFS Client Service
+ until all of the services within these groups have successfully
+ started.
+
+Value : DependOnService
+Type : REG_MULTI_SZ
+NSIS : Tcpip NETBIOS RpcSs
+
+ Specifies a list of services upon which the AFS Client Service
+ depends. Windows should not attempt to start the AFS Client Service
+ until all of the specified services have successfully started.
+
+Value : LogonOptions
+Type : DWORD
+NSIS : depends on user configuration
+
+ 0x00 - Integrated Logon is not used
+ 0x01 - Integrated Logon is used
+ 0x02 - High Security Mode is used
+ 0x03 - Integrated Logon with High Security Mode is used
+
+ High Security Mode generates random SMB names for the creation of
+ Drive Mappings. This mode should not be used without Integrated Logon.
+
+Value : LogonScript
+Type : REG_SZ
+NSIS : <install path>\afscreds.exe -:%s -x
+
+ Specifies the command to be executed at the end of successful logon.
+
+Value : Name
+Type : REG_SZ
+NSIS : "OpenAFSDaemon"
+
+ Specifies the display name of the AFS Client Service
+
+Value : ProviderPath
+Type : REG_SZ
+NSIS : <install path>\afslogon.dll
+
+ Specifies the DLL to use for the network provider
+
+Value : VerboseLogging
+Type : DWORD
+NSIS : 0x0a
+
+ Determines the level of logging to be enabled
+
+
+3. AFS Credentials System Tray Tool parameters
+----------------------------------------------
+Affects the behavior of afscreds.exe
+
+Regkey:
+[HKLM\SYSTEM\CurrentControlSet\Services\TransarcAFSDaemon\Parameters]
+
+Value : Gateway
+Type : REG_SZ
+Default : ""
+Function: GetGatewayName()
+
+ If the AFS client is utilizing a gateway to obtain AFS access,
+ the name of the gateway is specified by this value.
+
+Value : Cell
+Type : REG_SZ
+Default : <none>
+Variable: IsServiceConfigured()
+
+ The value Cell is used to determine if the AFS Client Service has
+ been properly configured or not.
+
+
+Regkey:
+[HKLM\SOFTWARE\OpenAFS\Client]
+[HKCU\SOFTWARE\OpenAFS\Client]
+
+Value : ShowTrayIcon
+Type : DWORD {0, 1}
+Default : 1
+Function: InitApp(), Main_OnCheckTerminate()
+
+ This value is used to determine whether or not a shortcut should be
+ maintained in the user's Start Menu->Programs->Startup folder.
+
+ This value used to be stored at
+ [HKLM\Software\TransarcCorporation\AFS Client\AfsCreds].
+
+Value : EnableKFW
+Type : DWORD {0, 1}
+Default : 1
+Function: KFW_is_available()
+
+ When MIT Kerberos for Windows can be loaded, Kerberos 5 will be used
+ to obtain AFS credentials. By setting this value to 0, the internal
+ Kerberos 4 implementation will be used instead.
+
+Value : AfscredsShortcutParams
+Type : REG_SZ
+Default : "-A -M -N -Q"
+Function: Shortcut_FixStartup
+
+ This value specifies the command line options which should be set
+ as part of the shortcut to afscreds.exe.
+
+
+Regkey:
+[HKCU\SOFTWARE\OpenAFS\Client\Reminders]
+
+Value : "afs cell name"
+Type : DWORD {0, 1}
+Default : <none>
+Function: LoadRemind(), SaveRemind()
+
+ These values are used to save and restore the state of the reminder
+ flag for each cell for which the user has obtained tokens.
+
+ This value used to be stored at
+ [HKLM\Software\TransarcCorporation\AFS Client\AfsCreds].
+
git://git.openafs.org / openafs.git / blobdiff