brought them there. Idempotency does not apply if the command issuer
explicitly interrupts the operation with the Ctrl-C command or another
interrupt signal. In that case, the volume is left locked and the
-administrator must use the B<vos unlock> command to unlock it before
-proceeding.
+administrator must use the L<B<vos unlock>|vos_unlock(1)> command to
+unlock it before proceeding.
It is important that the VLDB accurately indicate the status of the
volumes on file server machines at all times. L<vldb.DB0(5)> and
it automatically records the change in the corresponding VLDB entry. The
most common cause of discrepancies between the VLDB and volume status on
file server machines is interrupted operations; to restore consistency,
-use the B<vos syncserv> and B<vos syncvldb> commands.
+use the L<B<vos syncserv>|vos_syncserv(1)> and
+L<B<vos syncvldb>|vos_syncvldb(1)> commands.
There are several categories of commands in the vos command suite:
=item *
-Commands to create, move, and rename volumes: B<vos backup>, B<vos
-backupsys>, B<vos changeloc>, B<vos create>, B<vos move>, and B<vos
-rename>.
+Commands to create, move, and rename volumes:
+L<B<vos backup>|vos_backup(1)>,
+L<B<vos backupsys>|vos_backupsys(1)>,
+L<B<vos changeloc>|vos_changeloc(1)>,
+L<B<vos create>|vos_create(1)>,
+L<B<vos move>|vos_move(1)>,
+and L<B<vos rename>|vos_rename(1)>.
=item *
-Commands to remove VLDB volume records or volumes or both: B<vos
-delentry>, B<vos remove>, and B<vos zap>.
+Commands to remove VLDB volume records or volumes or both:
+L<B<vos delentry>|vos_delentry(1)>,
+L<B<vos remove>|vos_remove(1)>,
+and L<B<vos zap>|vos_zap(1)>.
=item *
-Commands to edit or display VLDB server entries: B<vos changeaddr> and
-B<vos listaddrs>.
+Commands to edit or display VLDB server entries:
+L<B<vos changeaddr>|vos_changeaddr(1)>
+and L<B<vos listaddrs>|vos_listaddrs(1)>.
=item *
-Commands to create, size, and restore dump files: B<vos dump>, B<vos
-restore>, and B<vos size>.
+Commands to create, size, and restore dump files:
+L<B<vos dump>|vos_dump(1)>,
+L<B<vos restore>|vos_restore(1)>,
+and L<B<vos size>|vos_size(1)>.
=item *
-Commands to administer replicated volumes: B<vos addsite>, B<vos release>,
-and B<vos remsite>.
+Commands to administer replicated volumes:
+L<B<vos addsite>|vos_addsite(1)>,
+L<B<vos release>|vos_release(1)>,
+and L<B<vos remsite>|vos_remsite(1)>.
=item *
-Commands to display VLDB records, volume headers, or both: B<vos examine>,
-B<vos listvldb>, and B<vos listvol>.
+Commands to display VLDB records, volume headers, or both:
+L<B<vos examine>|vos_examine(1)>,
+L<B<vos listvldb>|vos_listvldb(1)>,
+and L<B<vos listvol>|vos_listvol(1)>.
=item *
-Commands to display information about partitions that house volumes: B<vos
-listpart> and B<vos partinfo>.
+Commands to display information about partitions that house volumes:
+L<B<vos listpart>|vos_listpart(1)>
+and L<B<vos partinfo>|vos_partinfo(1)>.
=item *
-Commands to restore consistency between the VLDB and volume headers: B<vos
-syncserv> and B<vos syncvldb>.
+Commands to restore consistency between the VLDB and volume headers:
+L<B<vos syncserv>|vos_syncserv(1)>
+and L<B<vos syncvldb>|vos_syncvldb(1)>.
=item *
-Commands to lock and unlock VLDB entries: B<vos lock>, B<vos unlock>, and
-B<vos unlockvldb>.
+Commands to lock and unlock VLDB entries:
+L<B<vos lock>|vos_lock(1)>,
+L<B<vos unlock>|vos_unlock(1)>,
+and L<B<vos unlockvldb>|vos_unlockvldb(1)>.
=item *
-A command to report Volume Server status: B<vos status>.
+A command to report Volume Server status:
+L<B<vos status>|vos_status(1)>.
=item *
-A command to change volume fields: B<vos setfields>.
+A command to change volume fields:
+L<B<vos setfields>|vos_setfields(1)>.
=item *
-Commands to obtain help: B<vos apropos> and B<vos help>.
+Commands to obtain help:
+L<B<vos apropos>|vos_apropos(1)>
+and L<B<vos help>|vos_help(1)>.
=back
Server, in which the servers treat the issuer as the unprivileged user
C<anonymous>. It is useful only when authorization checking is disabled on
the server machine (during the installation of a file server machine or
-when the B<bos setauth> command has been used during other unusual
-circumstances). In normal circumstances, the servers allow only privileged
-users to issue commands that change the status of a volume or VLDB record,
-and refuses to perform such an action even if the B<-noauth> flag is
-provided. Do not combine the B<-noauth> and B<-localauth> flags.
+when the L<B<bos setauth>|bos_setauth(8)> command has been used during
+other unusual circumstances). In normal circumstances, the servers allow
+only privileged users to issue commands that change the status of a volume
+or VLDB record, and refuses to perform such an action even if the
+B<-noauth> flag is provided. Do not combine the B<-noauth> and
+B<-localauth> flags.
=item B<-partition> <I<partition name>>
/vicepiv = vicepiv = iv = 255
-The B<-frompartition> and B<-topartition> arguments to the B<vos move>
-command also accept this notation.
+The B<-frompartition> and B<-topartition> arguments to the
+L<B<vos move>|vos_move(1)> command also accept this notation.
=item B<-server> <I<machine name>>
(such as the Domain Name Service or a local host table) at the time the
command is issued.
-The B<-fromserver> and B<-toserver> arguments to the B<vos move> command
-also accept these name formats.
+The B<-fromserver> and B<-toserver> arguments to the
+L<B<vos move>|vos_move(1)> command also accept these name formats.
=item B<-noresolve>
S<<< [B<-roid> <I<readonly volume name or ID>>] >>>
[B<-valid>] S<<< [B<-cell> <I<cell name>>] >>>
[B<-noauth>] [B<-localauth>]
- [B<-verbose>] [B<-help>]
+ [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
B<vos ad> S<<< B<-s> <I<machine name for new site>> >>>
S<<< B<-p> <I<partition name for new site>> >>>
S<<< B<-i> <I<volume name or ID>> >>>
S<<< [B<-r> <I<readonly volume name or ID>>] >>>
- [B<-va>] [B<-c> <I<cell name>>] >>> [B<-n>] [B<-l>] [B<-v>] [B<-h>]
+ [B<-va>] [B<-c> <I<cell name>>] >>> [B<-noa>] [B<-l>]
+ [B<-ve>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
allocated for it when the B<vos release> command is run.
The automatically allocated readonly volume IDs should be fine for almost
-all cases, so you should almost never need to specify this option.
+all cases, so you should almost never need to specify them explicitly.
+This option is available in OpenAFS versions 1.5.61 or later.
=item B<-valid>
some reason it is not in the VLDB as a replica site. This is useful when
an existing read-only volume is dumped and restored with the B<-readonly>
flag at the new site. This option is available in OpenAFS clients 1.4.7 or
-later and 1.5.31 and later. This option can be used with OpenAFS server
+later and 1.5.31 or later. This option can be used with OpenAFS server
versions later than 1.4.1 or 1.5.0.
=item B<-cell> <I<cell name>>
execution. If this argument is omitted, only warnings and error messages
appear.
+=item B<-encrypt>
+
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
+
=item B<-help>
Prints the online help for this command. All other valid options are
=for html
<div class="synopsis">
-B<vos backup> S<<< B<-id> <I<volume name or ID>> >>> S<<< [B<-cell> <I<cell name>>] >>>
- [B<-noauth>] [B<-localauth>] [B<-verbose>] [B<-help>]
+B<vos backup> S<<< B<-id> <I<volume name or ID>> >>>
+ S<<< [B<-cell> <I<cell name>>] >>>
+ [B<-noauth>] [B<-localauth>] [B<-verbose>]
+ [B<-encrypt>] [B<-noresolve>] [B<-help>]
-B<vos backup> S<<< B<-i> <I<volume name or ID>> >>> [B<-c><I<cell name>>]
- [B<-n>] [B<-l>] [B<-v>] [B<-h>]
+B<vos backup> S<<< B<-i> <I<volume name or ID>> >>> [B<-c> <I<cell name>>]
+ [B<-noa>] [B<-l>] [B<-v>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
execution. If this argument is omitted, only warnings and error messages
appear.
+=item B<-encrypt>
+
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
+
=item B<-help>
Prints the online help for this command. All other valid options are
<div class="synopsis">
B<vos backupsys> S<<< [B<-prefix> <I<common prefix on volume(s)>>+] >>>
- S<<< [B<-server> <I<machine name>>] >>> S<<< [B<-partition> <I<partition name>>] >>>
+ S<<< [B<-server> <I<machine name>>] >>>
+ S<<< [B<-partition> <I<partition name>>] >>>
[B<-exclude>] S<<< [B<-xprefix> <I<negative prefix on volume(s)>>+] >>>
- [B<-dryrun>] S<<< [B<-cell> <I<cell name>>] >>> [B<-noauth>] [B<-localauth>]
- [B<-verbose>] [B<-help>]
+ [B<-dryrun>] S<<< [B<-cell> <I<cell name>>] >>>
+ [B<-noauth>] [B<-localauth>]
+ [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
B<vos backups> S<<< [B<-pr> <I<common prefix on volume(s)>>+] >>>
- S<<< [B<-s> <I<machine name>>] >>> S<<< [B<-pa> <I<partition name>>] >>> [B<-e>]
- S<<< [B<-x> <I<negative prefix on volume(s)>>+] >>> [B<-d>]
- S<<< [B<-c> <I<cell name>>] >>> [B<-n>] [B<-l>] [B<-v>] [B<-h>]
+ S<<< [B<-s> <I<machine name>>] >>> S<<< [B<-pa> <I<partition name>>] >>>
+ [B<-ex>] S<<< [B<-x> <I<negative prefix on volume(s)>>+] >>> [B<-d>]
+ S<<< [B<-c> <I<cell name>>] >>> [B<-noa>] [B<-l>] [B<-v>]
+ [B<-en>] [B<-nor>] [B<-h>]
=for html
</div>
execution. If this argument is omitted, only warnings and error messages
appear.
+=item B<-encrypt>
+
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
+
=item B<-help>
Prints the online help for this command. All other valid options are
B<vos changeaddr> S<<< B<-oldaddr> <I<original IP address>> >>>
S<<< [B<-newaddr> <I<new IP address>>] >>> [B<-remove>]
S<<< [B<-cell> <I<cell name>>] >>> [B<-noauth>] [B<-localauth>]
- [B<-verbose>] [B<-help>]
+ [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
-B<vos ch> S<<< B<-o> <I<original IP address>> >>> S<<< [B<-ne> <I<new IP address>>] >>>
- [B<-r>] S<<< [B<-c> <I<cell name>>] >>> [B<-no>] [B<-l>] [B<-v>] [B<-h>]
+B<vos changea> S<<< B<-o> <I<original IP address>> >>>
+ S<<< [B<-ne> <I<new IP address>>] >>> [B<-r>]
+ S<<< [B<-c> <I<cell name>>] >>>
+ [B<-noa>] [B<-l>] [B<-v>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
execution. If this argument is omitted, only warnings and error messages
appear.
+=item B<-encrypt>
+
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
+
=item B<-help>
Prints the online help for this command. All other valid options are
S<<< [B<-partition>] <I<new partition location>> >>>
S<<< [B<-id>] <I<volume name or ID>> >>>
S<<< [B<-cell> <I<cell name>>] >>> [B<-noauth>] [B<-localauth>]
- [B<-verbose>] [B<-encrypt>] [B<-help>]
+ [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
B<vos changel> S<<< [B<-s>] <I<new server name>> >>>
S<<< [B<-p>] <I<new partition location>> >>>
S<<< [B<-i>] <I<volume name or ID>> >>>
- S<<< [B<-c> <I<cell name>>] >>> [B<-n>] [B<-l>] [B<-v>] [B<-e>] [B<-h>]
+ S<<< [B<-c> <I<cell name>>] >>>
+ [B<-noa>] [B<-l>] [B<-v>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
=item B<-encrypt>
-Encrypts the commands that are sent to the server.
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
=item B<-help>
S<<< [B<-server>] <I<server name>> >>>
S<<< [B<-partition>] <I<partition name>> >>>
S<<< [B<-toname> <I<volume name on destination>>] >>>
- S<<< [B<-toid> <I<volume ID on destination>>] >>> [B<-offline>] [B<-readonly>]
- S<<< [B<-cell> <I<cell name>>] >>> [B<-noauth>]
- [B<-localauth>] [B<-verbose>] [B<-encrypt>] [B<-help>]
+ S<<< [B<-toid> <I<volume ID on destination>>] >>>
+ [B<-offline>] [B<-readonly>]
+ S<<< [B<-cell> <I<cell name>>] >>> [B<-noauth>] [B<-localauth>]
+ [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
+
+B<vos cl> S<<< [B<-i>] <I<volume name or ID>> >>>
+ S<<< [B<-s>] <I<server name>> >>>
+ S<<< [B<-p>] <I<partition name>> >>>
+ S<<< [B<-ton> <I<volume name on destination>>] >>>
+ S<<< [B<-toi> <I<volume ID on destination>>] >>> [B<-o>] [B<-r>]
+ S<<< [B<-c> <I<cell name>>] >>> [B<-noa>]
+ [B<-l>] [B<-v>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
=item B<-encrypt>
Encrypts the command so that the operation's results are not transmitted
-across the network in clear text.
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
=item B<-help>
S<<< [B<-partition>] <I<partition name>> >>>
S<<< [B<-id>] <I<volume name or ID>> >>> [B<-force>]
S<<< [B<-cell> <I<cell name>>] >>> [B<-noauth>] [B<-localauth>]
- [B<-verbose>] [B<-encrypt>] [B<-help>]
+ [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
+
+B<vos con> S<<< [B<-s>] <I<machine name>> >>>
+ S<<< [B<-p>] <I<partition name>> >>>
+ S<<< [B<-i>] <I<volume name or ID>> >>> [B<-f>]
+ S<<< [B<-c> <I<cell name>>] >>> [B<-noa>] [B<-l>]
+ [B<-v>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
=item B<-encrypt>
Encrypts the command so that the operation's results are not transmitted
-across the network in clear text.
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
=item B<-help>
S<<< [B<-toserver>] <I<machine name for destination>> >>>
S<<< [B<-topartition>] <I<partition name for destination>> >>>
[B<-offline>] [B<-readonly>] [B<-live>] S<<< [B<-cell> <I<cell name>>] >>>
- [B<-noauth>] [B<-localauth>] [B<-verbose>] [B<-encrypt>] [B<-help>]
+ [B<-noauth>] [B<-localauth>] [B<-verbose>] [B<-encrypt>] [B<-noresolve>]
+ [B<-help>]
+
+B<vos cop> S<<< [B<-i>] <I<volume name or ID of source>> >>>
+ S<<< [B<-froms>] <I<machine name for source>> >>>
+ S<<< [B<-fromp>] <I<partition name for source>> >>>
+ S<<< [B<-ton>] <I<volume name for new copy>> >>>
+ S<<< [B<-tos>] <I<machine name for destination>> >>>
+ S<<< [B<-top>] <I<partition name for destination>> >>>
+ [B<-o>] [B<-r>] [B<-li>] S<<< [B<-c> <I<cell name>>] >>>
+ [B<-noa>] [B<-lo>] [B<-v>] [B<-e>] [B<-nor>]
+ [B<-h>]
=for html
</div>
=item B<-encrypt>
Encrypts the command so that the operation's results are not transmitted
-across the network in clear text.
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
=item B<-help>
=for html
<div class="synopsis">
-B<vos create> S<<< B<-server> <I<machine name>> >>> S<<< B<-partition> <I<partition name>> >>>
- S<<< B<-name> <I<volume name>> >>> S<<< [B<-maxquota> <I<initial quota>>] >>>
- S<<< [B<-id> <I<volume ID>>] >>> S<<< [B<-roid> <I<readonly volume ID>>] >>>
- S<<< [B<-cell> <I<cell name>>] >>> [B<-noauth>] [B<-localauth>] [B<-verbose>]
- [B<-help>]
+B<vos create> S<<< B<-server> <I<machine name>> >>>
+ S<<< B<-partition> <I<partition name>> >>>
+ S<<< B<-name> <I<volume name>> >>>
+ S<<< [B<-maxquota> <I<initial quota (KB)>>] >>>
+ S<<< [B<-cell> <I<cell name>>] >>>
+ [B<-noauth>] [B<-localauth>] [B<-verbose>]
+ [B<-encrypt>] [B<-noresolve>] [B<-help>]
B<vos cr> S<<< B<-s> <I<machine name>> >>> S<<< B<-p> <I<partition name>> >>>
S<<< B<-na> <I<volume name>> >>> S<<< [B<-m> <I<initial quota>>] >>>
- S<<< [B<-i> <I<volume ID>>] >>> S<<< [B<-r> <I<readonly volume ID>>] >>>
- S<<< [B<-c> <I<cell name>>] >>> [B<-no>] [B<-l>] [B<-v>] [B<-h>]
+ S<<< [B<-c> <I<cell name>>] >>> [B<-noa>] [B<-l>] [B<-v>]
+ [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
As with the B<-id> option, the default allocated volume IDs should be
sufficient for almost all cases, so you should almost never need to
-specify this option.
+specify them explicitly. This option is available in OpenAFS
+versions 1.5.61 or later.
=item B<-cell> <I<cell name>>
execution. If this argument is omitted, only warnings and error messages
appear.
+=item B<-encrypt>
+
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
+
=item B<-help>
Prints the online help for this command. All other valid options are
<div class="synopsis">
B<vos delentry> S<<< [B<-id> <I<volume name or ID>>+] >>>
- S<<< [B<-prefix> <I<prefix of volume whose VLDB entry is to be deleted>>] >>>
- S<<< [B<-server> <I<machine name>>] >>> S<<< [B<-partition> <I<partition name>>] >>>
- S<<< [B<-cell> <I<cell name>>] >>> [B<-noauth>] [B<-localauth>] [B<-verbose>]
- [B<-help>]
+ S<<< [B<-prefix> <I<prefix of volume whose VLDB entry is to be deleted>>] >>>
+ S<<< [B<-server> <I<machine name>>] >>>
+ S<<< [B<-partition> <I<partition name>>] >>>
+ S<<< [B<-cell> <I<cell name>>] >>> [B<-noauth>] [B<-localauth>]
+ [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
B<vos de> S<<< [B<-i> <I<volume name or ID>>+] >>>
S<<< [B<-pr> <I<prefix of volume whose VLDB entry is to be deleted>>] >>>
S<<< [B<-s> <I<machine name>>] >>> S<<< [B<-pa> <I<partition name>>] >>>
- S<<< [B<-c> <I<cell name>>] >>> [B<-n>] [B<-l>] [B<-v>] [B<-h>]
+ S<<< [B<-c> <I<cell name>>] >>> [B<-noa>] [B<-l>]
+ [B<-v>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
execution. If this argument is omitted, only warnings and error messages
appear.
+=item B<-encrypt>
+
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
+
=item B<-help>
Prints the online help for this command. All other valid options are
=for html
<div class="synopsis">
-B<vos dump> S<<< B<-id> <I<volume name or ID>> >>> S<<< [B<-time> <I<dump from time>>] >>>
+B<vos dump> S<<< B<-id> <I<volume name or ID>> >>>
+ S<<< [B<-time> <I<dump from time>>] >>>
S<<< [B<-file> <I<dump file>>] >>> S<<< [B<-server> <I<server>>] >>>
S<<< [B<-partition> <I<partition>>] >>> [B<-clone>] [B<-omitdirs>]
S<<< [B<-cell> <I<cell name>>] >>> [B<-noauth>] [B<-localauth>]
- [B<-verbose>] [B<-help>]
+ [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
-B<vos du> S<<< B<-i> <I<volume name or ID>> >>> S<<< [B<-t> <I<dump from time>>] >>>
- S<<< [B<-f> <I<dump file>>] >>> S<<< [B<-s> <I<server>>] >>> S<<< [B<-p> <I<partition>>] >>>
- [B<-cl>] [B<-o>] S<<< [B<-ce> <I<cell name>>] >>> [B<-n>] [B<-l>]
- [B<-v>] [B<-h>]
+B<vos du> S<<< B<-i> <I<volume name or ID>> >>>
+ S<<< [B<-t> <I<dump from time>>] >>>
+ S<<< [B<-f> <I<dump file>>] >>> S<<< [B<-s> <I<server>>] >>>
+ S<<< [B<-p> <I<partition>>] >>>
+ [B<-cl>] [B<-o>] S<<< [B<-ce> <I<cell name>>] >>> [B<-noa>] [B<-l>]
+ [B<-v>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
execution. If this argument is omitted, only warnings and error messages
appear.
+=item B<-encrypt>
+
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
+
=item B<-help>
Prints the online help for this command. All other valid options are
<div class="synopsis">
B<vos examine> S<<< B<-id> <I<volume name or ID>> >>> [B<-extended>]
- S<<< [B<-cell> <I<cell name>>] >>> [B<-noauth>] [B<-localauth>] [B<-verbose>]
- [B<-help>]
+ [B<-format>] S<<< [B<-cell> <I<cell name>>] >>>
+ [B<-noauth>] [B<-localauth>] [B<-verbose>]
+ [B<-encrypt>] [B<-noresolve>] [B<-help>]
-B<vos e> S<<< B<-i> <I<volume name or ID>> >>> [B<-e>] S<<< [B<-c> <I<cell name>>] >>>
- [B<-n>] [B<-l>] [B<-v>] [B<-h>]
+B<vos e> S<<< B<-i> <I<volume name or ID>> >>> [B<-ex>] [B<-f>]
+ S<<< [B<-c> <I<cell name>>] >>>
+ [B<-noa>] [B<-l>] [B<-v>] [B<-e>] [B<-nor>] [B<-h>]
-B<vos volinfo> S<<< B<-i> <I<volume name or ID>> >>> [B<-e>] [-c <I<cell name>>]
- [B<-n>] [B<-l>] [B<-v>] [B<-h>]
+B<vos volinfo> S<<< B<-id> <I<volume name or ID>> >>> [B<-extended>]
+ [B<-format>] S<<< [B<-cell> <I<cell name>>] >>>
+ [B<-noauth>] [B<-localauth>] [B<-verbose>]
+ [B<-encrypt>] [B<-noresolve>] [B<-help>]
-B<vos v> S<<< B<-i> <I<volume name or ID>> >>> [B<-e>] S<<< [B<-c> <I<cell name>>] >>>
- [B<-n>] [B<-l>] [B<-v>] [B<-h>]
+B<vos v> S<<< B<-i> <I<volume name or ID>> >>> [B<-ex>] [B<-f>]
+ S<<< [B<-c> <I<cell name>>] >>>
+ [B<-noa>] [B<-l>] [B<-v>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
Display statistics about read and write operations on files and
directories in the volume.
+=item B<-format>
+
+Show information in a format suitable for machine parsing.
+
=item B<-cell> <I<cell name>>
Names the cell in which to run the command. Do not combine this argument
execution. If this argument is omitted, only warnings and error messages
appear.
+=item B<-encrypt>
+
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
+
=item B<-help>
Prints the online help for this command. All other valid options are
=for html
<div class="synopsis">
-B<vos listaddrs> S<<< [B<-cell> <I<cell name>>] >>> [B<-noauth>]
- [B<-localauth>] [B<-verbose>] [B<-help>]
+B<vos listaddrs> S<<< [B<-uuid> <I<uuid of server>>] >>>
+ S<<< [B<-host> <I<address of host>>] >>> [B<-printuuid>]
+ S<<< [B<-cell> <I<cell name>>] >>> [B<-noauth>] [B<-localauth>]
+ [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
-B<vos lista> S<<< [B<-c> <I<cell name>>] >>> [B<-n>] [B<-l>] [B<-v>] [B<-h>]
+B<vos lista> [B<-u> <I<uuid of server>>] >>>
+ S<<< [B<-h> <I<address of host>>] >>> [B<-p>]
+ S<<< [B<-c> <I<cell name>>] >>> [B<-noa>] [B<-l>]
+ [B<-v>] [B<-e>] [B<-nor>] [B<-he>]
=for html
</div>
=over 4
+=item B<-printuuid>
+
+Prints UUID of hosts. The B<-printuuid> option is available in OpenAFS
+versions 1.4.5 or later and 1.5.8 or later.
+
=item B<-cell> <I<cell name>>
Names the cell in which to run the command. Do not combine this argument
execution. If this argument is omitted, only warnings and error messages
appear.
+=item B<-encrypt>
+
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
+
=item B<-help>
Prints the online help for this command. All other valid options are
sv2.abc.com afs2.abc.com
sv6.abc.com
+The following command displays the VLDB server entry and uuid for
+host sv5.abc.com in the ABC Corporation cell:
+
+ % vos listaddrs -p -ho sv5.abc.com
+ UUID: 000c5aff-8246-1699-96-c4-437b5a45aa77
+ sv5.abc.com
+
=head1 PRIVILEGE REQUIRED
None
=head1 SEE ALSO
+L<fs_uuid(1)>,
L<sysid(5)>,
L<vos(1)>,
L<vos_changeaddr(1)>,
=for html
<div class="synopsis">
-B<vos listpart> S<<< B<-server> <I<machine name>> >>> S<<< [B<-cell> <I<cell name>>] >>>
- [B<-noauth>] [B<-localauth>] [B<-verbose>] [B<-help>]
+B<vos listpart> S<<< B<-server> <I<machine name>> >>>
+ S<<< [B<-cell> <I<cell name>>] >>>
+ [B<-noauth>] [B<-localauth>]
+ [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
-B<vos listp> S<<< B<-s> <I<machine name>> >>> S<<< [B<-c> <I<cell name>>] >>> [B<-n>]
- [B<-l>] [B<-v>] [B<-h>]
+B<vos listp> S<<< B<-s> <I<machine name>> >>> S<<< [B<-c> <I<cell name>>] >>>
+ [B<-noa>] [B<-l>] [B<-v>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
execution. If this argument is omitted, only warnings and error messages
appear.
+=item B<-encrypt>
+
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
+
=item B<-help>
Prints the online help for this command. All other valid options are
<div class="synopsis">
B<vos listvldb> S<<< [B<-name> <I<volume name or ID>>] >>>
- S<<< [B<-server> <I<machine name>>] >>> S<<< [B<-partition> <I<partition name>>] >>>
- [B<-locked>] [B<-quiet>] [B<-nosort>] S<<< [B<-cell> <I<cell name>>] >>>
- [B<-noauth>] [B<-localauth>] [B<-verbose>] [B<-help>]
-
-B<vos listvl> S<<< [B<-na> <I<volume name or ID>>] >>> S<<< [B<-s> <I<machine name>>] >>>
- S<<< [B<-p> <I<partition name>>] >>> [B<-lock>] [B<-q>] [B<-nos>]
- S<<< [B<-c> <I<cell name>>] >>> [B<-noa>] [B<-loca>] [B<-v>] [B<-h>]
+ S<<< [B<-server> <I<machine name>>] >>>
+ S<<< [B<-partition> <I<partition name>>] >>>
+ [B<-locked>] [B<-quiet>] [B<-nosort>]
+ S<<< [B<-cell> <I<cell name>>] >>> [B<-noauth>] [B<-localauth>]
+ [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
+
+B<vos listvl> S<<< [B<-na> <I<volume name or ID>>] >>>
+ S<<< [B<-s> <I<machine name>>] >>>
+ S<<< [B<-p> <I<partition name>>] >>>
+ [B<-lock>] [B<-q>] [B<-nos>] S<<< [B<-c> <I<cell name>>] >>>
+ [B<-noa>] [B<-loca>] [B<-v>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
execution. If this argument is omitted, only warnings and error messages
appear.
+=item B<-encrypt>
+
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
+
=item B<-help>
Prints the online help for this command. All other valid options are
<div class="synopsis">
B<vos listvol> S<<< B<-server> <I<machine name>> >>>
- S<<< [B<-partition> <I<partition name>>] >>> [B<-fast>] [B<-long>] [B<-quiet>]
- [B<-extended>] S<<< [B<-cell> <I<cell name>>] >>> [B<-noauth>] [B<-localauth>]
- [B<-verbose>] [B<-help>]
-
-B<vos listvo> S<<< B<-s> <I<machine name>> >>> S<<< [B<-p> <I<partition name>>] >>> [B<-f>]
- [-lon] [B<-q>] [B<-e>] S<<< [B<-c> <I<cell name>>] >>> [B<-n>] [B<-loc>]
- [B<-v>] [B<-h>]
+ S<<< [B<-partition> <I<partition name>>] >>>
+ [B<-fast>] [B<-long>] [B<-quiet>]
+ [B<-extended>] [B<-format>]
+ S<<< [B<-cell> <I<cell name>>] >>> [B<-noauth>] [B<-localauth>]
+ [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
+
+B<vos listvo> S<<< B<-s> <I<machine name>> >>>
+ S<<< [B<-p> <I<partition name>>] >>>
+ [B<-fa>] [-lon] [B<-q>] [B<-ex>] [B<-fo>]
+ S<<< [B<-c> <I<cell name>>] >>>
+ [B<-noa>] [B<-loc>] [B<-v>] [B<-en>] [B<-nor>] [B<-h>]
=for html
</div>
their owners or other users. Do not combine this flag with the B<-fast>
flag.
+=item B<-format>
+
+Show information in a format suitable for machine parsing.
+
=item B<-cell> <I<cell name>>
Names the cell in which to run the command. Do not combine this argument
execution. If this argument is omitted, only warnings and error messages
appear.
+=item B<-encrypt>
+
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
+
=item B<-help>
Prints the online help for this command. All other valid options are
=for html
<div class="synopsis">
-B<vos lock> S<<< B<-id> <I<volume name or ID>> >>> S<<< [B<-cell> <I<cell name>>] >>>
- [B<-noauth>] [B<-localauth>] [B<-verbose>] [B<-help>]
+B<vos lock> S<<< B<-id> <I<volume name or ID>> >>>
+ S<<< [B<-cell> <I<cell name>>] >>>
+ [B<-noauth>] [B<-localauth>]
+ [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
-B<vos lo> S<<< B<-i> <I<volume name or ID>> >>> S<<< [B<-c> <I<cell name>>] >>> [B<-n>]
- [B<-l>] [B<-v>] [B<-h>]
+B<vos lo> S<<< B<-i> <I<volume name or ID>> >>>
+ S<<< [B<-c> <I<cell name>>] >>>
+ [B<-noa>] [B<-l>] [B<-v>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
execution. If this argument is omitted, only warnings and error messages
appear.
+=item B<-encrypt>
+
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
+
=item B<-help>
Prints the online help for this command. All other valid options are
S<<< B<-frompartition> <I<partition name on source>> >>>
S<<< B<-toserver> <I<machine name on destination>> >>>
S<<< B<-topartition> <I<partition name on destination>> >>>
- [B<-live>] S<<< [B<-cell> <I<cell name>>] >>> [B<-noauth>]
- [B<-localauth>] [B<-verbose>] [B<-help>]
+ [B<-live>] S<<< [B<-cell> <I<cell name>>] >>> [B<-noauth>] [B<-localauth>]
+ [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
B<vos m> S<<< B<-i> <I<volume name or ID>> >>>
S<<< B<-froms> <I<machine name on source>> >>>
S<<< B<-fromp> <I<partition name on source>> >>>
S<<< B<-tos> <I<machine name on destination>> >>>
- S<<< B<-top> <I<partition name on destination>> >>> [B<-li>]
- S<<< [B<-c> <I<cell name>>] >>> [B<-n>] [B<-l>] [B<-v>] [B<-h>]
+ S<<< B<-top> <I<partition name on destination>> >>>
+ [B<-li>] S<<< [B<-c> <I<cell name>>] >>> [B<-noa>]
+ [B<-lo>] [B<-v>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
execution. If this argument is omitted, only warnings and error messages
appear.
+=item B<-encrypt>
+
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
+
=item B<-help>
Prints the online help for this command. All other valid options are
=for html
<div class="synopsis">
-B<vos offline> S<<< B<-server> <I<machine name>> >>> S<<< B<-partition> <I<partition name>> >>>
- S<<< B<-id> <I<volume name or ID>> >>> S<<< [B<-unbless>] >>> S<<< [B<-cell> <I<cell name>>] >>>
- S<<< [B<-noauth>] | B<-localauth>] >>> S<<< [B<-verbose>] >>> S<<< [B<-encrypt>] >>> S<<< [B<-help>] >>>
+B<vos offline> S<<< B<-server> <I<machine name>> >>>
+ S<<< B<-partition> <I<partition name>> >>>
+ S<<< B<-id> <I<volume name or ID>> >>>
+ S<<< [B<-sleep> <I<seconds to sleep>>] >>>
+ [B<-busy>] S<<< [B<-cell> <I<cell name>>] >>>
+ [B<-noauth>] B<-localauth>]
+ [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
+
+B<vos of> S<<< B<-se> <I<machine name>> >>>
+ S<<< B<-p> <I<partition name>> >>>
+ S<<< B<-i> <I<volume name or ID>> >>>
+ S<<< [B<-sl> <I<seconds to sleep>>] >>>
+ [B<-b>] S<<< [B<-c> <I<cell name>>] >>>
+ [B<-noa>] B<-l>]
+ [B<-v>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
=item B<-encrypt>
-Encrypts the command so that the operation's results are
-not transmitted across the network in clear text.
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
=item B<-help>
so that a B<vos online> without B<-bless> will not bring it online:
% vos offline -server sv7.stateu.edu -partition /vicepb -id root.afs \
- -unbless
+ -unbless
=head1 PRIVILEGE REQUIRED
=for html
<div class="synopsis">
-B<vos online> S<<< B<-server> <I<machine name>> >>> S<<< B<-partition> <I<partition name>> >>>
- S<<< B<-id> <I<volume name or ID>> >>> S<<< [B<-bless>] >>> S<<< [B<-cell> <I<cell name>>] >>>
- S<<< [B<-noauth>] | B<-localauth>] >>> S<<< [B<-verbose>] >>> S<<< [B<-encrypt>] >>> S<<< [B<-help>] >>>
+B<vos online> S<<< B<-server> <I<machine name>> >>>
+ S<<< B<-partition> <I<partition name>> >>>
+ S<<< B<-id> <I<volume name or ID>> >>>
+ [B<-bless>] S<<< [B<-cell> <I<cell name>>] >>>
+ [B<-noauth>] B<-localauth>]
+ [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
+
+B<vos on> S<<< B<-s> <I<machine name>> >>>
+ S<<< B<-p> <I<partition name>> >>>
+ S<<< B<-i> <I<volume name or ID>> >>>
+ [B<-b>] S<<< [B<-c> <I<cell name>>] >>>
+ [B<-noa>] B<-l>] [B<-v>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
=item B<-encrypt>
-Encrypts the command so that the operation's results are
-not transmitted across the network in clear text.
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
=item B<-help>
<div class="synopsis">
B<vos partinfo> S<<< B<-server> <I<machine name>> >>>
- S<<< [B<-partition> <I<partition name>>] >>> S<<< [B<-cell> <I<cell name>>] >>>
- [B<-noauth>] [B<-localauth>] [B<-verbose>] [B<-help>]
+ S<<< [B<-partition> <I<partition name>>] >>> [B<-summary>]
+ S<<< [B<-cell> <I<cell name>>] >>>
+ [B<-noauth>] [B<-localauth>]
+ [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
-B<vos p> S<<< B<-s> <I<machine name>> >>> S<<< [B<-p> <I<partition name>>] >>>
- S<<< [B<-c> <I<cell name>>] >>> [B<-n>] [B<-l>] [B<-v>] [B<-h>]
+B<vos p> S<<< B<-se> <I<machine name>> >>>
+ S<<< [B<-p> <I<partition name>>] >>> [B<-su>]
+ S<<< [B<-c> <I<cell name>>] >>>
+ [B<-noa>] [B<-l>] [B<-v>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
or use one of the three acceptable abbreviated forms. For details, see
L<vos(1)>.
+=item B<-summary>
+
+Prints storage summary.
+
=item B<-cell> <I<cell name>>
Names the cell in which to run the command. Do not combine this argument
execution. If this argument is omitted, only warnings and error messages
appear.
+=item B<-encrypt>
+
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
+
=item B<-help>
Prints the online help for this command. All other valid options are
=for html
<div class="synopsis">
-B<vos release> S<<< B<-id> <I<volume name or ID>> >>> [B<-f>]
- S<<< [B<-cell> <I<cell name>>] >>> [B<-noauth>] [B<-localauth>] [B<-verbose>]
- [B<-help>]
+B<vos release> S<<< B<-id> <I<volume name or ID>> >>> [B<-force>]
+ S<<< [B<-cell> <I<cell name>>] >>>
+ [B<-noauth>] [B<-localauth>]
+ [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
-B<vos rel> S<<< B<-i> <I<volume name or ID>> >>> [B<-f>] S<<< [B<-c> <I<cell name>>] >>>
- [B<-n>] [B<-l>] [B<-v>] [B<-h>]
+B<vos rel> S<<< B<-i> <I<volume name or ID>> >>>
+ [B<-f>] S<<< [B<-c> <I<cell name>>] >>>
+ [B<-noa>] [B<-l>] [B<-v>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
=back
To override the default behavior, forcing the Volume Server to create and
-release a new ReleaseClone to the read-only sites, include the B<-f>
+release a new ReleaseClone to the read-only sites, include the B<-force>
flag. This is appropriate if, for example, the data at the read/write site
has changed since the existing ReleaseClone was created during the
previous release operation.
Specifies either the complete name or volume ID number of a read/write
volume.
-=item B<-f>
+=item B<-force>
Creates a new ReleaseClone and distributes it all read-only sites
regardless of whether or not any site definitions in the VLDB entry are
execution. If this argument is omitted, only warnings and error messages
appear.
+=item B<-encrypt>
+
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
+
=item B<-help>
Prints the online help for this command. All other valid options are
B<vos remove> S<<< [B<-server> <I<machine name>>] >>>
S<<< [B<-partition> <I<partition name>>] >>>
- S<<< B<-id> <I<volume name or ID>> >>> S<<< [B<-cell> <I<cell name>>] >>>
- [B<-noauth>] [B<-localauth>] [B<-verbose>] [B<-help>]
+ S<<< B<-id> <I<volume name or ID>> >>>
+ S<<< [B<-cell> <I<cell name>>] >>>
+ [B<-noauth>] [B<-localauth>]
+ [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
-B<vos remo> S<<< [B<-s> <I<machine name>>] >>> S<<< [B<-p> <I<partition name>>] >>>
- S<<< B<-i> <I<volume name or ID>> >>> S<<< [B<-c> <I<cell name>>] >>> [B<-n>] [B<-l>]
- [B<-v>] [B<-h>]
+B<vos remo> S<<< [B<-s> <I<machine name>>] >>>
+ S<<< [B<-p> <I<partition name>>] >>>
+ S<<< B<-i> <I<volume name or ID>> >>>
+ S<<< [B<-c> <I<cell name>>] >>>
+ [B<-noa>] [B<-l>] [B<-v>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
execution. If this argument is omitted, only warnings and error messages
appear.
+=item B<-encrypt>
+
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
+
=item B<-help>
Prints the online help for this command. All other valid options are
-=head1 NAME
+head1 NAME
vos_remsite - Removes a read-only site definition from a VLDB entry
<div class="synopsis">
B<vos remsite> S<<< B<-server> <I<machine name>> >>>
- S<<< B<-partition> <I<partition name>> >>> S<<< B<-id> <I<volume name or ID>> >>>
- S<<< [B<-cell> <I<cell name>>] >>> [B<-noauth>] [B<-localauth>] [B<-verbose>]
- [B<-help>]
-
-B<vos rems> S<<< B<-s> <I<machine name>> >>> S<<< B<-p> <I<partition name>> >>>
- S<<< B<-i> <I<volume name or ID>> >>> S<<< [B<-c> <I<cell name>>] >>> [B<-n>] [B<-l>]
- [B<-v>] [B<-h>]
+ S<<< B<-partition> <I<partition name>> >>>
+ S<<< B<-id> <I<volume name or ID>> >>>
+ S<<< [B<-cell> <I<cell name>>] >>>
+ [B<-noauth>] [B<-localauth>]
+ [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
+
+B<vos rems> S<<< B<-s> <I<machine name>> >>>
+ S<<< B<-p> <I<partition name>> >>>
+ S<<< B<-i> <I<volume name or ID>> >>>
+ S<<< [B<-c> <I<cell name>>] >>>
+ [B<-noa>] [B<-l>] [B<-v>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
execution. If this argument is omitted, only warnings and error messages
appear.
+=item B<-encrypt>
+
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
+
=item B<-help>
Prints the online help for this command. All other valid options are
<div class="synopsis">
B<vos rename> S<<< B<-oldname> <I<old volume name>> >>>
- S<<< B<-newname> <I<new volume name>> >>> S<<< [B<-cell> <I<cell name>>] >>>
- [B<-noauth>] [B<-localauth>] [B<-verbose>] [B<-help>]
+ S<<< B<-newname> <I<new volume name>> >>>
+ S<<< [B<-cell> <I<cell name>>] >>>
+ [B<-noauth>] [B<-localauth>]
+ [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
-B<vos ren> S<<< B<-o> <I<old volume name>> >>> S<<< B<-ne> <I<new volume name>> >>>
- [-c <I<cell name>>] [B<-no>] [B<-l>] [B<-v>] [B<-h>]
+B<vos ren> S<<< B<-o> <I<old volume name>> >>>
+ S<<< B<-ne> <I<new volume name>> >>>
+ [-c <I<cell name>>] [B<-noa>] [B<-l>] [B<-v>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
execution. If this argument is omitted, only warnings and error messages
appear.
+=item B<-encrypt>
+
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
+
=item B<-help>
Prints the online help for this command. All other valid options are
=for html
<div class="synopsis">
-B<vos restore> S<<< B<-server> <I<machine name>> >>> S<<< B<-partition> <I<partition name>> >>>
- S<<< B<-name> <I<name of volume to be restored>> >>> S<<< [B<-file> <I<dump file>>] >>>
- S<<< [B<-id> <I<volume ID>>] >>> S<<< [B<-overwrite> (abort | full | incremental)] >>>
- S<<< [B<-cell> <I<cell name>>] >>> [B<-noauth>] [B<-localauth>] [-verbose]
- [B<-help>]
-
-B<vos res> S<<< B<-s> <I<machine name>> >>> S<<< B<-p> <I<partition name>> >>>
- S<<< B<-na> <I<name of volume to be restored>> >>> S<<< [B<-f> <I<dump file>>] >>>
- S<<< [B<-i> <I<volume ID>>] >>> S<<< [B<-o> (a | f | i)] >>> S<<< [B<-c> <I<cell name>>] >>>
- [B<-no>] [B<-l>] [B<-v>] [B<-h>]
+B<vos restore> S<<< B<-server> <I<machine name>> >>>
+ S<<< B<-partition> <I<partition name>> >>>
+ S<<< B<-name> <I<name of volume to be restored>> >>>
+ S<<< [B<-file> <I<dump file>>] >>>
+ S<<< [B<-id> <I<volume ID>>] >>>
+ S<<< [B<-overwrite> (abort | full | incremental)] >>>
+ [B<-offline>] [B<-readonly>]
+ S<<< [B<-creation> (dump | keep | new)] >>>
+ S<<< [B<-lastupdate> (dump | keep | new)] >>>
+ [B<-nodelete>] S<<< [B<-cell> <I<cell name>>] >>>
+ [B<-noauth>] [B<-localauth>]
+ [-verbose] [B<-encrypt>] [B<-noresolve>] [B<-help>]
+
+B<vos res> S<<< B<-s> <I<machine name>> >>>
+ S<<< B<-p> <I<partition name>> >>>
+ S<<< B<-na> <I<name of volume to be restored>> >>>
+ S<<< [B<-f> <I<dump file>>] >>>
+ S<<< [B<-i> <I<volume ID>>] >>>
+ S<<< [B<-ov> (a | f | i)] >>>
+ [B<-of>] [B<-r>]
+ S<<< [B<-cr> (d | k | n)] >>>
+ S<<< [B<-la> (d | k | n)] >>>
+ [B<-nod>] S<<< [B<-c> <I<cell name>>] >>>
+ [B<-noa>] [B<-lo>] [B<-v>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
This argument is mandatory if the B<-file> argument is not provided.
+=item B<-offline>
+
+Leaves the new volume flagged as off-line in the volume database.
+
+=item B<-readonly>
+
+Flags the new volume as read-only in the volume database.
+
+=item B<-nodelete>
+
+This option is available in OpenAFS clients 1.4.7 or
+later and 1.5.31 or later. This option can be used with OpenAFS server
+versions 1.4.1 or later and 1.5.0 or later.
+
=item B<-cell> <I<cell name>>
Names the cell in which to run the command. Do not combine this argument
execution. If this argument is omitted, only warnings and error messages
appear.
+=item B<-encrypt>
+
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
+
=item B<-help>
Prints the online help for this command. All other valid options are
<div class="synopsis">
B<vos setfields> S<<< B<-id> <I<volume name or ID>> >>>
- S<<< B<-maxquota> <I<quota>> >>> [B<-clearuse>]
- S<<< [B<-cell> <I<cell name>>] >>> [B<-noauth>] [B<-localauth>]
+ S<<< B<-maxquota> <I<quota (KB)>> >>>
+ [B<-clearuse>] [B<-clearVolUpCounter>]
+ S<<< [B<-cell> <I<cell name>>] >>>
+ [B<-noauth>] [B<-localauth>]
[B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
B<vos se> S<<< B<-id> <I<volume name or ID>> >>>
- S<<< B<-maxquota> <I<quota>> >>> [B<-clearuse>]
- S<<< [B<-cell> <I<cell name>>] >>> [B<-noauth>] [B<-localauth>]
- [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
+ S<<< B<-m> <I<quota (KB)>> >>> [B<-cl>]
+ S<<< [B<-ce> <I<cell name>>] >>>
+ [B<-noa>] [B<-l>] [B<-v>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
=item B<-clearuse>
-Clears the access counter on a volumes, which is shown as C<X accesses in
+Clears the access counter on a volume, which is shown as C<X accesses in
the past day (i.e., vnode references)> in the B<vos examine> output.
+=item B<-clearVolUpCounter>
+
+Clears the modification counter on a volume. The modification counter
+will increment with time and stop updating when it reaches the maximum
+value. This option will reset it to 0. This option is available in OpenAFS
+version 1.5.0 or later.
+
=item B<-cell> <I<cell name>>
Names the cell in which to run the command. Do not combine this argument
authentication. Do not combine this flag with the B<-cell> argument or
B<-noauth> flag. For more details, see L<vos(1)>.
+=item B<-verbose>
+
+Produces on the standard output stream a detailed trace of the command's
+execution. If this argument is omitted, only warnings and error messages
+appear.
+
=item B<-encrypt>
Encrypts the command so that the operation's results are not transmitted
-across the network in clear text.
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
=item B<-noresolve>
Shows all servers as IP addresses instead of the DNS name. This is very
useful when the server address is registered as 127.0.0.1 or when dealing
-with multi-homed servers. The B<-noresolve> option is available in OpenAFS
+with multi-homed servers. This option is available in OpenAFS
versions 1.4.8 or later and 1.5.35 or later.
-=item B<-verbose>
-
-Produces on the standard output stream a detailed trace of the command's
-execution. If this argument is omitted, only warnings and error messages
-appear.
-
=item B<-help>
Prints the online help for this command. All other valid options are
S<<< [B<-toserver>] <I<machine name on destination>> >>>
S<<< [B<-topartition>] <I<partition name on destination>> >>>
S<<< [B<-toname> <I<volume name on destination>>] >>>
- S<<< [B<-toid> <I<volume ID on destination>>] >>> [B<-offline>] [B<-readonly>]
- [B<-live>] [B<-incremental>] S<<< [B<-cell> <I<cell name>>] >>> [B<-noauth>]
- [B<-localauth>] [B<-verbose>] [B<-encrypt>] [B<-help>]
+ S<<< [B<-toid> <I<volume ID on destination>>] >>>
+ [B<-offline>] [B<-readonly>] [B<-live>] [B<-incremental>]
+ S<<< [B<-cell> <I<cell name>>] >>>
+ [B<-noauth>] [B<-localauth>]
+ [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
+
+B<vos sh> S<<< [B<-id>] <I<volume name or ID on source>> >>>
+ S<<< [B<-froms>] <I<machine name on source>> >>>
+ S<<< [B<-fromp>] <I<partition name on source>> >>>
+ S<<< [B<-tos>] <I<machine name on destination>> >>>
+ S<<< [B<-top>] <I<partition name on destination>> >>>
+ S<<< [B<-ton> <I<volume name on destination>>] >>>
+ S<<< [B<-toi> <I<volume ID on destination>>] >>>
+ [B<-o>] [B<-r>] [B<-l>] [B<-in>]
+ S<<< [B<-c> <I<cell name>>] >>>
+ [B<-noa>] [B<-lo>] [B<-v>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
=item B<-encrypt>
Encrypts the command so that the operation's results are not transmitted
-across the network in clear text.
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
=item B<-help>
=for html
<div class="synopsis">
-B<vos size> S<<< [B<-cell> <I<cell name>>] >>> [B<-dump>]
- [B<-encrypt>] [B<-help>] [B<-id>] <I<volume name or id>>
- [B<-localauth>] [B<-noauth>]
+B<vos size> S<<< [B<-id>] <I<volume name or id>> >>>
S<<< [B<-partition> <I<partition name>>] >>>
S<<< [B<-server> <I<machine name>>] >>>
- S<<< [B<-time> <I<dump from time>>] >>> [B<-verbose>]
+ [B<-dump>] S<<< [B<-time> <I<dump from time>>] >>>
+ S<<< [B<-cell> <I<cell name>>] >>>
+ [B<-noauth>] [B<-localauth>]
+ [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
+
+B<vos si> S<<< [B<-i>] <I<volume name or id>> >>>
+ S<<< [B<-p> <I<partition name>>] >>>
+ S<<< [B<-s> <I<machine name>>] >>>
+ [B<-d>] S<<< [B<-t> <I<dump from time>>] >>>
+ S<<< [B<-c> <I<cell name>>] >>>
+ [B<-no>] [B<-l>]
+ [B<-v>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
=over 4
-=item B<-cell> <I<cell name>>
+=item B<-id> <I<volume name or id>>
-The cell in which the volume resides, if it's not in the current cell.
+Specifies either the complete name or volume ID number of the read/write,
+read-only, or backup volume to size.
+
+=item B<-partition> <I<partition name>>
+
+Specifies the partition on which the volume resides. Provide the
+B<-server> argument along with this one.
+
+=item B<-server> <I<machine name>>
+
+Specifies the file server machine on which the volume resides. Provide
+the B<-partition> argument along with this one.
=item B<-dump>
It is present to allow this command to provide other size estimates in the
future.
-=item B<-encrypt>
+=item B<-time> <I<dump from time>>
-Encrypt the command.
+Specifies whether the dump is full or incremental. Omit this argument to
+size a full dump. See L<vos_dump(1)> for the valid values for this
+option.
-=item B<-help>
+=item B<-cell> <I<cell name>>
-Prints the online help for this command. All other valid options are
-ignored.
+The cell in which the volume resides, if it's not in the current cell.
-=item B<-id> <I<volume name or id>>
+=item B<-noauth>
-Specifies either the complete name or volume ID number of the read/write,
-read-only, or backup volume to size.
+Assigns the unprivileged identity anonymous to the issuer. Do not combine
+this flag with the B<-localauth> flag. For more details, see L<vos(1)>.
=item B<-localauth>
authentication. Do not combine this flag with the B<-cell> argument or
B<-noauth> flag. For more details, see L<vos(1)>.
-=item B<-noauth>
-
-Assigns the unprivileged identity anonymous to the issuer. Do not combine
-this flag with the B<-localauth> flag. For more details, see L<vos(1)>.
-
-=item B<-partition> <I<partition name>>
+=item B<-verbose>
-Specifies the partition on which the volume resides. Provide the
-B<-server> argument along with this one.
+Show more output about what's going on.
-=item B<-server> <I<machine name>>
+=item B<-encrypt>
-Specifies the file server machine on which the volume resides. Provide
-the B<-partition> argument along with this one.
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
-=item B<-time> <I<dump from time>>
+=item B<-noresolve>
-Specifies whether the dump is full or incremental. Omit this argument to
-size a full dump. See L<vos_dump(1)> for the valid values for this
-option.
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
-=item B<-verbose>
+=item B<-help>
-Show more output about what's going on.
+Prints the online help for this command. All other valid options are
+ignored.
=back
=for html
<div class="synopsis">
-B<vos status> S<<< B<-server> <I<machine name>> >>> S<<< [B<-cell> <I<cell name>>] >>>
- [B<-noauth>] [B<-localauth>] [B<-verbose>] [B<-help>]
+B<vos status> S<<< B<-server> <I<machine name>> >>>
+ S<<< [B<-cell> <I<cell name>>] >>>
+ [B<-noauth>] [B<-localauth>]
+ [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
-B<vos st> S<<< B<-s> <I<machine name>> >>> S<<< [B<-c> <I<cell name>>] >>> [B<-n>] [B<-l>]
- [B<-v>] [B<-h>]
+B<vos st> S<<< B<-s> <I<machine name>> >>>
+ S<<< [B<-c> <I<cell name>>] >>>
+ [B<-noa>] [B<-l>] [B<-v>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
execution. If this argument is omitted, only warnings and error messages
appear.
+=item B<-encrypt>
+
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
+
=item B<-help>
Prints the online help for this command. All other valid options are
<div class="synopsis">
B<vos syncserv> S<<< B<-server> <I<machine name>> >>>
- S<<< [B<-partition> <I<partition name>>] >>> S<<< [B<-cell> <I<cell name>>] >>>
- [B<-dryrun>] [B<-noauth>] [B<-localauth>] [B<-verbose>] [B<-help>]
+ S<<< [B<-partition> <I<partition name>>] >>>
+ S<<< [B<-cell> <I<cell name>>] >>>
+ [B<-dryrun>]
+ [B<-noauth>] [B<-localauth>]
+ [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
-B<vos syncs> S<<< B<-s> <I<machine name>> >>> S<<< [B<-p> <I<partition name>>] >>>
- S<<< [B<-c> <I<cell name>>] >>> [B<-d>] [B<-n>] [B<-l>] [B<-v>] [B<-h>]
+B<vos syncs> S<<< B<-s> <I<machine name>> >>>
+ S<<< [B<-p> <I<partition name>>] >>>
+ S<<< [B<-c> <I<cell name>>] >>> [B<-d>]
+ [B<-noa>] [B<-l>] [B<-v>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
execution. If this argument is omitted, only warnings and error messages
appear.
+=item B<-encrypt>
+
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
+
=item B<-help>
Prints the online help for this command. All other valid options are
<div class="synopsis">
B<vos syncvldb> S<<< [B<-server> <I<machine name>>] >>>
- S<<< [B<-partition> <I<partition name>>] >>> S<<< [B<-volume> <I<volume name or ID>>] >>>
- S<<< [B<-cell> <I<cell name>>] >>> [B<-dryrun>] [B<-noauth>] [B<-localauth>] [B<-verbose>]
- [B<-help>]
-
-B<vos syncv> S<<< [B<-s> <I<machine name>>] >>> S<<< [B<-p> <I<partition name>>] >>>
- S<<< [B<-vo> <I<volume name or ID>>] >>> S<<< [B<-c> <I<cell name>>] >>> [B<-d>] [B<-n>] [B<-l>]
- [B<-ve>] [B<-h>]
+ S<<< [B<-partition> <I<partition name>>] >>>
+ S<<< [B<-volume> <I<volume name or ID>>] >>>
+ [B<-dryrun>] S<<< [B<-cell> <I<cell name>>] >>>
+ [B<-noauth>] [B<-localauth>]
+ [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
+
+B<vos syncv> S<<< [B<-s> <I<machine name>>] >>>
+ S<<< [B<-p> <I<partition name>>] >>>
+ S<<< [B<-vo> <I<volume name or ID>>] >>>
+ [B<-d>] S<<< [B<-c> <I<cell name>>] >>>
+ [B<-noa>] [B<-l>] [B<-ve>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
execution. If this argument is omitted, only warnings and error messages
appear.
+=item B<-encrypt>
+
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
+
=item B<-help>
Prints the online help for this command. All other valid options are
=for html
<div class="synopsis">
-B<vos unlock> S<<< B<-id> <I<volume name or ID>> >>> S<<< [B<-cell> <I<cell name>>] >>>
- [B<-noauth>] [B<-localauth>] [B<-verbose>] [B<-help>]
+B<vos unlock> S<<< B<-id> <I<volume name or ID>> >>>
+ S<<< [B<-cell> <I<cell name>>] >>>
+ [B<-noauth>] [B<-localauth>]
+ [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
-B<vos unlock> S<<< B<-i> <I<volume name or ID>> >>> S<<< [B<-c> <I<cell name>>] >>> [B<-n>]
- [B<-l>] [B<-v>] [B<-h>]
+B<vos unlock> S<<< B<-i> <I<volume name or ID>> >>>
+ S<<< [B<-c> <I<cell name>>] >>>
+ [B<-noa>] [B<-l>] [B<-v>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
execution. If this argument is omitted, only warnings and error messages
appear.
+=item B<-encrypt>
+
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
+
=item B<-help>
Prints the online help for this command. All other valid options are
<div class="synopsis">
B<vos unlockvldb> S<<< [B<-server> <I<machine name>>] >>>
- S<<< [B<-partition> <I<partition name>>] >>> S<<< [B<-cell> <I<cell name>>] >>>
- [B<-noauth>] [B<-localauth>] [B<-verbose>] [B<-help>]
+ S<<< [B<-partition> <I<partition name>>] >>>
+ S<<< [B<-cell> <I<cell name>>] >>>
+ [B<-noauth>] [B<-localauth>]
+ [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
-B<vos unlockv> S<<< [B<-s> <I<machine name>>] >>> S<<< [B<-p> <I<partition name>>] >>>
- S<<< [B<-c> <I<cell name>>] >>> [B<-n>] [B<-l>] [B<-v>] [B<-h>]
+B<vos unlockv> S<<< [B<-s> <I<machine name>>] >>>
+ S<<< [B<-p> <I<partition name>>] >>>
+ S<<< [B<-c> <I<cell name>>] >>>
+ [B<-noa>] [B<-l>] [B<-v>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
execution. If this argument is omitted, only warnings and error messages
appear.
+=item B<-encrypt>
+
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
+
=item B<-help>
Prints the online help for this command. All other valid options are
=for html
<div class="synopsis">
-B<vos zap> S<<< B<-server> <I<machine name>> >>> S<<< B<-partition> <I<partition name>> >>>
- S<<< B<-id> <I<volume ID>> >>> [B<-force>] [B<-backup>]
- S<<< [B<-cell> <I<cell name>>] >>> [B<-noauth>] [B<-localauth>] [B<-verbose>]
- [B<-help>]
-
-B<vos z> S<<< B<-s> <I<machine name>> >>> S<<< B<-p> <I<partition name>> >>>
- S<<< B<-i> <I<volume ID>> >>> [B<-f>] [B<-b>] S<<< [B<-c> <I<cell name>>] >>> [B<-n>]
- [B<-l>] [B<-v>] [B<-h>]
+B<vos zap> S<<< B<-server> <I<machine name>> >>>
+ S<<< B<-partition> <I<partition name>> >>>
+ S<<< B<-id> <I<volume ID>> >>>
+ [B<-force>] [B<-backup>]
+ S<<< [B<-cell> <I<cell name>>] >>>
+ [B<-noauth>] [B<-localauth>]
+ [B<-verbose>] [B<-encrypt>] [B<-noresolve>] [B<-help>]
+
+B<vos z> S<<< B<-s> <I<machine name>> >>>
+ S<<< B<-p> <I<partition name>> >>>
+ S<<< B<-i> <I<volume ID>> >>>
+ [B<-f>] [B<-b>] S<<< [B<-c> <I<cell name>>] >>>
+ [B<-noa>] [B<-l>] [B<-v>] [B<-e>] [B<-nor>] [B<-h>]
=for html
</div>
execution. If this argument is omitted, only warnings and error messages
appear.
+=item B<-encrypt>
+
+Encrypts the command so that the operation's results are not transmitted
+across the network in clear text. This option is available in OpenAFS
+versions 1.4.11 or later and 1.5.60 or later.
+
+=item B<-noresolve>
+
+Shows all servers as IP addresses instead of the DNS name. This is very
+useful when the server address is registered as 127.0.0.1 or when dealing
+with multi-homed servers. This option is available in OpenAFS
+versions 1.4.8 or later and 1.5.35 or later.
+
=item B<-help>
Prints the online help for this command. All other valid options are
git://git.openafs.org / openafs.git / commitdiff