Windows: Add cm_SyncOp to cm_ReadMountPoint()

Add a cm_SyncOp(CM_SCACHESYNC_FETCHDATA) call to cm_ReadMountPoint()
to prevent multiple FetchData RPCs being issued for the same
mount point at the same time.

Change-Id: I7651f4505727289d800af060cc3ff5a5f449f447
Reviewed-on: http://gerrit.openafs.org/8235
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>

Windows: AFSInitFcb assign pFcb->ObjectInformation

In AFSInitFcb() assign pFcb->ObjectInformation before the
InterlockedExchangePointer call and not afterwards.  Assigning
it afterwards leaves a small race where the ObjectInformation
value will be invalid.

Change-Id: Ie79587e0b2f161b7ff612fc4fb283135bafd1085
Reviewed-on: http://gerrit.openafs.org/8222
Reviewed-by: Rod Widdowson <rdw@steadingsoftware.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>

Windows: OpenTargetDirectory AFSInitFcb Reparse Test

In AFSOpenTargetDirectory the test to determine if AFSInitFcb
allocated a FCB or returned an existing one (STATUS_REPARSE)
was reversed.  If AFSInitFcb was called and AFSOpenTargetDirectory
eventually failed, an in use FCB would be freed.

Change-Id: Ie5974fee5202685575f286fe4fef43dfdc0698cb
Reviewed-on: http://gerrit.openafs.org/8244
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Rod Widdowson <rdw@steadingsoftware.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>

Windows: ObjectInformationCB indentation

Fix indentation within ObjectInformationCB structure

Change-Id: I004ca5a16fceb63522e3f244177e60e4459e507b
Reviewed-on: http://gerrit.openafs.org/8219
Reviewed-by: Rod Widdowson <rdw@steadingsoftware.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>

Windows: Do not call buf_ClearRDRFlag unlink/rmdir

When processing unlink and remdir operations initiated by the
SMB stack do not call  buf_ClearRDRFlag.  The redirector upon
receiving the AFS_INVALIDATE_DELETE call will cancel outstanding
extent operations, mark the FCB deleted, and tear down any held
extents.

Change-Id: I5203dbe5489fcfd0a1c871c3e7aa6aa1a7d65e9a
Reviewed-on: http://gerrit.openafs.org/8218
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>

Windows: Correct alloc size SetFileExtents result

AFSFileExtentCB objects not AFSSetFileExtentsCB objects.
The latter are too large.  Just wastes memory.

Change-Id: I2ffd1bfd639acc37e2d06bc61749d4ac93376668
Reviewed-on: http://gerrit.openafs.org/8217
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>

Windows: AFS_INVALIDATE_DELETE must cancel IO

When processing an AFS_INVALIDATE_DELETE the redirector
must cancel any outstanding extent requests on the file
prior to tearing down the extents.

This code path is triggered either when VNOVNODE is received
from a file server or when an alternate cache manager interface
(SMB) unlinks the file.

Change-Id: I16c08c2469228b33ae4ece0e45a9890a057ab257
Reviewed-on: http://gerrit.openafs.org/8206
Reviewed-by: Rod Widdowson <rdw@steadingsoftware.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>

salvager: fix formatting in the rest of the Log messages

right now some not-commonly-defined code fails to compile with warnings.
fix it so it uses a format string like everything else.

Change-Id: Ib35445db9800444f3ee74a43f17aeb6f2959645a
Reviewed-on: http://gerrit.openafs.org/8236
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>

rx: Use opr queues

Modify RX so that it uses opr queues throughout, rather than the older,
non-type-safe rx_queue structure and macros. Attempt to clarify which
items in a structure are queue headers, and which are linkage pointers.

This has the knock on effect that including an RX header doesn't
automatically give you rx_queue.h in your application's namespace.

Change-Id: I1b3fbcd8c03f8153a557bd4532710bcebfe45818
Reviewed-on: http://gerrit.openafs.org/8232
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

rx: Move server queue entry structure out of rx.h

Hide the server queue management structure in its own header file,
rather than exposing it globally in rx.h. This structure has always
been private - applications have no business knowing about it!

Change-Id: I97ac31e0e77dbe1c10b2804f33901d933a8f0627
Reviewed-on: http://gerrit.openafs.org/8231
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

libafs: Fix second pass in ShakeLooseVCaches

Commit 3105c7ff introduced a two phase process for reclaiming
vcache entries.  First go through the list and do what's possible
without sleeping (skipping aliased dentries on Linux), then do
a second pass only if necessary, allowing sleeping.

Unfortunately the test for the end of the VLRU scan is incorrect
and can never trigger, so this second pass was effectively disabled
and any code that is conditional on defersleep=1 was never
exercised.  The code to start the second scan also has issues.

Fix the end of VLRU test, and also correctly set the variables
needed to restart the scan.

Change-Id: I8034cd3b79aab4f2976ab2559c13c102126480d7
Reviewed-on: http://gerrit.openafs.org/8234
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

Linux 3.7: putname is no longer exported

putname is unexported in kernel 3.7.  Add a compatibility inline
afs_putname function and open code it if necessary.

Change-Id: I5416067566f6332d77e5d91ce2b9cf7bc0c96dce
Reviewed-on: http://gerrit.openafs.org/8237
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

rxperf: Use libtool RX library

Use the libtool built liboafs_rx.la, rather than using libafsrpc
for OpenAFS

Change-Id: Iffc32e512b6f8dd2a89bbc9774b0477236087b0c
Reviewed-on: http://gerrit.openafs.org/8243
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>

rx: Export some more functions

Export some symbols that are required by rxperf

Change-Id: I12d99a9ed1c025c838a4f80ecd61aadd19d20c4c
Reviewed-on: http://gerrit.openafs.org/8245
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

rx: Skip rxi_CheckPeerDead if we are DALLY

DALLY connections don't need to be marked dead, so just skip the whole
function if we are DALLY.

Change-Id: I8a70c93edb54be28cfda499bc8ce3b7b5b7db600
Reviewed-on: http://gerrit.openafs.org/8120
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

LINUX: Ignore 'offender' in error queue processing

The 'offender' is who generated the error, possibly who sent us an
icmp packet (the given 'port' will be 0). What we want is the peer
that is actually unavailable, which is already in the 'addr' variable
we received from the recvmsg itself.

Change-Id: I930293ca14f0e13ba09ee94b5a5d9cdc0f321743
Reviewed-on: http://gerrit.openafs.org/8119
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

rx: Check for peer deadness in rxi_Resend

If we need to resend something, the peer we're sending to may be dead.
Check if the peer is dead in rxi_Resend, so we don't have to wait
(possibly several seconds) for the next rxi_CheckCall.

Change-Id: I0ecc0b1fc23bb4194ebadcea97dd58c938af8154
Reviewed-on: http://gerrit.openafs.org/8118
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

rx: Process all errors received

When we receive a buffer of errors from the error queue, loop through
all of them, and do not stop at the first applicable one we find.

Change-Id: Iad928e0489041b360fe705ac397836650b30091e
Reviewed-on: http://gerrit.openafs.org/8116
Reviewed-by: Simon Wilkinson <simonxwilkinson@gmail.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Reviewed-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Tested-by: BuildBot <buildbot@rampaginggeek.com>

linux: always define do_handlesocketerror

even if we are not handling socket errors, have a stub function

Change-Id: I1f3c1631c5ddcf10e74612e13aafbae833bd5eaa
Reviewed-on: http://gerrit.openafs.org/8240
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

rx: pthread sendmsg should return success, not a bytecount

thanks to Marc Dionne for noticing the error

Change-Id: I6e5d8b6e3aa30cb0722aff1a9e538f23f40de441
Reviewed-on: http://gerrit.openafs.org/8246
Tested-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Reviewed-by: Marc Dionne <marc.c.dionne@gmail.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

LINUX: Allocate error queue buffer once

We call osi_HandleSocketError in a loop, so make sure we process all
of the errors. We were allocating a buffer to process the errors in
osi_HandleSocketError itself, but we can reuse the same buffer on
subsequent invocations, to reduce allocation/free pressure if we need
to call osi_HandleSocketError more than once. So, do that.

Change-Id: Idca2b9d21a48a868574ce6cfc5efe2efba3570a1
Reviewed-on: http://gerrit.openafs.org/8115
Reviewed-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

rx: Process error queue after noticing errors

If errors exist in the socket error queue, we will notice by a sendmsg
or recvmsg returning an error. If we never get an error, we don't need
to check the error queue. So, only call osi_HandleSocketError after
such an error has been returned, so we can avoid unnecessarily
checking the error queue when there are no errors.

Change-Id: I7c8aaaac42728dac7fb0634538b8cc317f0e7212
Reviewed-on: http://gerrit.openafs.org/8114
Reviewed-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Reviewed-by: Simon Wilkinson <simonxwilkinson@gmail.com>

Turn on Linux rx error queue and PMTU handling

Change-Id: I17822e9463b5e34bd43e96926a168a19773b2b21
Reviewed-on: http://gerrit.openafs.org/7928
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

Revert "Add some basic tests to check out fuse"

This reverts commit 94bf003a720c9a883ba7ebf43ab3053d3072d3dd.

The fuse tests are fundamentally broken as they stand:

*) They rely on files that have not been committed to the tree. To
   function correctly the file fuse/conf/CellServDB must be present
*) They always run, regardless of whether the fuse helper binaries are
   installed on the developers system, or even on whether the tree was
   built with fuse support enabled.
*) They pass, even if fuse fails to start up
*) The file fuse.sh is committed, despite being unused. This is
   particularly confusing, as it looks like this is where the tests
   are performed from (its not, testing is done in dynroot-t)
*) fuse-log should be either cleaned up, or flagged as ignored in
   .gitignore

Revert the commit until such time as all these issues can be fixed

Change-Id: I5ff9a95f33c0a5d0614bb47c521a8770d92fe2eb
Reviewed-on: http://gerrit.openafs.org/8230
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

tests: Reformat loopback tests

Reformat the loopback tests to match our house style - 4 spaces for
first indent, a tab for the second, and so on, opening brace of a
function on a newline, spaces around assignments, and so on.

Change-Id: I54f168ca143e7ff46c9d82289331b8314849f848
Reviewed-on: http://gerrit.openafs.org/8229
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>

tests: Tidy up loopback adapter tests

Remove the unused h_errno extern, which in turn removes the need
for disabling strict prototype warnings in the Makefile

Use roken.h, instead of hardcoding system libraries

Change-Id: Ie654c77ff60ed14fc3b659fa3eb527535be71164
Reviewed-on: http://gerrit.openafs.org/8228
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>

Linux: osi_vcache: Fix loop for the hlist case

An hlist is not circular, and the end is marked by a NULL next
pointer.

Change-Id: Iec7ad7e3e7ee989d548233b045aa8def1ebfb1dc
Reviewed-on: http://gerrit.openafs.org/8233
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

DAFS: VRS_r with VOL_SALVAGE_NO_OFFLINE in attach2

One caller of VRequestSalvage_r in attach2 was not passing the
VOL_SALVAGE_NO_OFFLINE flag. This really should be passed for every
place that manually sets vp->nUsers = 0, since then the VPutVolume_r
handlers will never fire.

Change-Id: I088d93a6c598a4d636224f4cf4c0d89454efcca8
Reviewed-on: http://gerrit.openafs.org/8203
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

sys: Split up syscall.lo 'echo's

Currently we echo a string to syscall.lo to generate it. However,
'echo' is often a shell builtin, and some shells (such as bash) do not
interpret escape codes like \n unless the -e option is given. So, this
results in syscall.lo containing a single commented line, which
results in .libs/libafsrpc_sys.a not getting created, which later on
causes errors.

Instead, just split the syscall.lo generation into separate echo
invocations, to make sure we work everywhere.

Change-Id: I8a6ed42a0837086de604be0936d830f0f4558ebf
Reviewed-on: http://gerrit.openafs.org/8202
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>

afsd: consolidate macos event handling code

in order that this can potentially be extracted entirely
to a platform-specific file, (and possibly dbus-equivalents
inserted also) consolidate the macos system events handling code

Change-Id: I8fc4a96dc2590778a13f27610b383ee35626871e
Reviewed-on: http://gerrit.openafs.org/8201
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>

afs: Avoid tracking file locks for RO volumes

Advisory file locks for RO volumes don't make a lot of sense, since
there are no possible writes to worry about. The fileserver already
does not track these, so don't even bother processing them in the
client.

Change-Id: Ie2a20d2f7af67799cfb8d30e72aa3e52a1ecc2d5
Reviewed-on: http://gerrit.openafs.org/8197
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

comerr: no need to libl on macos

libl is obsolete on macos; stop linking it

Change-Id: If6e184b6a13ccd3f6b175e9dfbfae9a595322159
Reviewed-on: http://gerrit.openafs.org/8200
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: Derrick Brashear <shadow@your-file-system.com>

configure: make use of native build assist tools possible

provide a way to run native rxgen, config and compile_et

Change-Id: I9d1a2b4a1d4100fdc4a042005586e8fc40f39f7b
Reviewed-on: http://gerrit.openafs.org/8199
Tested-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

Add some basic tests to check out fuse

Update makefiles to have 'make test' and 'make check' use the
_nolibafs build version, since there are no tests that (currently)
require the AFS kernel module to be built.

Clean up fuse test copyright notice, Alphabetize configure.ac

Change-Id: Icc95dd3393cd66f0d04fa5f6e8f806db60ca031e
Reviewed-on: http://gerrit.openafs.org/8135
Reviewed-by: Troy Benjegerdes <hozer-gerrit@hozed.org>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>

config: make makefile builder be a config tool also

all of our helper tools should be configured in one place,
so a cross compile can override them

Change-Id: I35044832257fa3389504f79207aa423e39d1ad4a
Reviewed-on: http://gerrit.openafs.org/8198
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

afs: Use common cleanup code for lockctl EINVAL

afs_lockctl has common cleanup code in the 'done' label. Use it here,
instead of trying to duplicate it.

Currently this code path appears to not be dropping the discon lock,
which this rectifies.

Change-Id: I136a78bc3235454db7e3d69bb79b0061cfcab265
Reviewed-on: http://gerrit.openafs.org/8196
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>

bos: convert struct bnode to use opr

Convert struct bnode to use the common linked list code from opr.
bnode_Deactivate() was converted but is unused by the code and isn't
tested.

Change-Id: I0edec453f15cf19e82088e3d361483cc5833f897
Reviewed-on: http://gerrit.openafs.org/8168
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>

bos: convert struct bnode_proc to use opr

Convert struct bnode_proc to use the common linked list code from opr.

Change-Id: I30753ad10387b23509be0831d378772049f4be9d
Reviewed-on: http://gerrit.openafs.org/8167
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>

bos: convert struct bnode_type to use opr

Convert struct bnode_type to use the common linked list code from opr.

Change-Id: I21329aff81a91a79a1fcf525f4fdd3a22b33ec92
Reviewed-on: http://gerrit.openafs.org/8166
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

bos: split part of bnode.p.h into bnode_internal.h

Move the bosserver specific parts of bnode.p.h into bnode_internal.h
so that inclusion of bnode.h doesn't expose bosserver's internals.

Change-Id: Id58714507211331a57c36eb71c1c3937fff0dd2a
Reviewed-on: http://gerrit.openafs.org/8169
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>

generated target updates

tweak what's needed to build helper binaries for cross-compile

Change-Id: Ib476716e1e32444f0b2aeb8cb8a1e91ab49471de
Reviewed-on: http://gerrit.openafs.org/8173
Tested-by: Derrick Brashear <shadow@your-file-system.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

Windows: File Info Query Symlinks

For Symlinks, always set the Reparse Point attribute and
set the Directory attribute if the target is a directory.
Do not return the file attributes of the target.

Change-Id: I72dcde912c998e1ab3eea45426d019314e10e740
Reviewed-on: http://gerrit.openafs.org/8171
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>

Windows: Dir Enum behavior for Symlinks / MPs

Comparisons of the behavior of cmd.exe, powershell.exe, and tcc.exe
with regards to directory enumeration show that when Symlink file
information is returned that the "reparse point" data should be
reported along with whether or not the target is a directory.

For mount points, the reparse point file information should always
be returned and the type should always be directory.

The target timestamps, file sizes, etc. should never be returned.

Change-Id: I0f899229061a282d0d218155407ffc4ab62ad377
Reviewed-on: http://gerrit.openafs.org/8170
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>

Windows: Move afsredir process type check

The process type check in afsredir.sys was performed during the
Process Creation callback which is processed in the context of the
parent process which might not be the same type (32-bit or 64-bit)
as the process being created.

Change-Id: I6ae79a6dacf434a986c7bb0135b2238fcfeeb0cd
Reviewed-on: http://gerrit.openafs.org/8165
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>

Windows: Fix memory leak SRXAFSCB_GetCellServ

In commit 19f1e0f7cf40c3da1d49c789358bd814f7e3b3eb strdup()
was replaced by xdr_alloc() and memcpy().  Unfortunately,
the patch was wrong and the pointer to which the result of
xdr_alloc() was assigned was overwritten with zero.

Change-Id: I0a9e6c03d67e2a1c811e84808fbbdd39f782ba87
Reviewed-on: http://gerrit.openafs.org/8162
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>

Windows: duplicate ExtentsResource hold

All callers to AFSDoExtentsMapRegion() hold the ExtentsResource
so there is no need to obtain it again within the function.  Instead
add an ASSERT to confirm that the resource is held.

Change-Id: Id34a3d650062d6e519a66732d248c136a92e4be3
Reviewed-on: http://gerrit.openafs.org/8161
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>

Windows: make static RDR_ParseIoctlPath[Parent]

The RDR_ParseIoctlPath and RDR_ParseIoctlPathParent functions
are helper functions within RDRIoctl.cpp.   Make them static
and remove them from the header.

Change-Id: I5f3b68f87701e2d8423a01c236c7cb598c3ff743
Reviewed-on: http://gerrit.openafs.org/8160
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>

Windows: remove reqp param RDR_IoctlWrite/Read

The RDR_IoctlWrite and RDR_IoctlRead functions no longer
use the cm_req_t parameter so remove it.

Change-Id: I1c6f09da9e4a386f79dae1c15b0b2ccdce944d51
Reviewed-on: http://gerrit.openafs.org/8159
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>

Windows: add cm_req_t to RDR_ioctl_t

The cm_req_t structure flags store information related to
the source of the request and whether the process is WOW64 or not.
This information is required for proper pioctl processing.  Add
a cm_req_t structure to the RDR_ioctl_t structure and initialize
it in RDR_SetupIoctl() which is called from RDR_PioctlOpen().

Change-Id: I351101f036f63bbb1f0d7b19e9b092b18a3e070e
Reviewed-on: http://gerrit.openafs.org/8158
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>

Windows: Add bWow64 param to RDR_InitReq

Instead of using the pattern

  RDR_InitReq(&req);
  if (bWow64)
     req.flags |= CM_REQ_WOW64;

add bWow64 as a parameter to RDR_InitReq().

Change-Id: I2c02683ab857c6743b46e83dc3f9defa660263d0
Reviewed-on: http://gerrit.openafs.org/8157
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>

Windows: cm_ExpandSysName for 64-bit processes

on 64-bit Windows, only 32-bit processes have the WOW64 request
type flag set.   Reverse the conditional to permit proper evaluation
of the 64-bit sysname list.

Change-Id: I0bbad7b275b836ecaff73c69afdde08e17f310a7
Reviewed-on: http://gerrit.openafs.org/8147
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>

RedHat: Avoid the DKMS escaping silliness

Depending on the version of DKMS, the current MAKE[0] variable in the
dkms.conf needs different numbers of backslashes. Commit 81a9a33e
tried to address this by changing the contents of dkms.conf depending
on whether or not we were on Fedora. However, the change occurred in
DKMS 2.2, so if someone running RHEL tries to use a newer DKMS, this
will fail.

So instead of trying to guess at the level of escaping we need, just
avoid needing to escape anything with backslashes. We can quote the
heredoc marker to avoid variable expansion inside the heredoc, we can
use a case statement instead of using backticks and local variables
and such, and we can use single quotes for the outer MAKE assignment.
With this, we should not need any backslashes when writing dkms.conf,
so we should work with any DKMS version.

Change-Id: I5484826c37da13ee383e08bbfeb473aa993e245e
Reviewed-on: http://gerrit.openafs.org/8156
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Tested-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

afs: casting NULL is generally unnecessary

Casting NULL shouldn't be necessary in most cases.  Eliminate this
in favor of shorter lines and consistency.  Function pointers, variadic
arguments should still be cast.

Change-Id: Ibcd67378556e45c2b24f7aa85a4d73c72cd88e02
Reviewed-on: http://gerrit.openafs.org/8151
Reviewed-by: Garrett Wollman <wollman@csail.mit.edu>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

viced: Remove unused gettimeofday calls

StartTime and EndTime are set with gettimeofday(), but are not
used for any calcualtions or statistics, and appear to never have
been used.  There are platforms where gettimeofday is expensive,
so remove the variables and the calls.

Change-Id: I9ff8035377227cb07383ffea15b7e04f155e307f
Reviewed-on: http://gerrit.openafs.org/8164
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>

TESTS: Skip the volser tests if current hostname maps to the loopback network

Change-Id: I35d16ba418d0ecd67ffbd54d564a515bf551fe8d
Reviewed-on: http://gerrit.openafs.org/8146
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>

auth: token jar handling should realloc correctly

instead of reallocing n+1 tokens, we would realloc 1 token
plus N bytes

Change-Id: Idb5a20b5b9becc9d48cb645bbc0bd26459220ccd
Reviewed-on: http://gerrit.openafs.org/8163
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>

afsio: add -clear and -crypt option

Allow the user to optionally not use encryption (and also allow
user to ensure that encryption is being used).

Change-Id: I3ad590e21f5139654b22c8284ea2634ce902a1b5
Reviewed-on: http://gerrit.openafs.org/8138
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

DOXYGEN: Move the protocol and architecture docs into their own modules

Change-Id: I1021d99c2479f9157e5c5b1fef10e5d975b35f86
Reviewed-on: http://gerrit.openafs.org/8130
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

DOXYGEN: Add a simple index page

Change-Id: I26dde9ae732841f04799f7b6ff79a994c450400b
Reviewed-on: http://gerrit.openafs.org/8129
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

Windows: Export a few more functions to afsauthent and afsrpc

The following exports are added:

libafsauthent:
    afsconf_SetExtendedCellInfo
    afsconf_PickClientSecObj
    afsconf_SawCell
    ka_PrintBytes
    ka_KeyIsZero

libafsrpc:
    initialize_RXK_error_table

Those functions are referenced by the bos code.

Change-Id: I26898070c8e9dc7cac53f13c49dadf28d58457f4
Reviewed-on: http://gerrit.openafs.org/8154
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

TESTS: Add a library to check for the default loopback network

Change-Id: Id7bb92345e97309363fa5ddbff9147edf30ccd96
Reviewed-on: http://gerrit.openafs.org/8145
Reviewed-by: Marc Dionne <marc.c.dionne@gmail.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

bozo: fix typo in help text

Fix a typo for "interface" in the help text for bosserver.

Change-Id: I042fc52e46f50dd00be9fc9bf62525a0f2755dda
Reviewed-on: http://gerrit.openafs.org/8144
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jason Edgecombe <jason@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Reviewed-by: Michael Meffie <mmeffie@sinenomine.net>

LINUX: Avoid 'wakeup' define

Make 'wakeup' a static inline function instead of redefining 'wakeup',
so we can use the keyword 'wakeup' elsewhere.

Specifically, 'wakeup' is used in some Linux kernel structures, so
redefining it can confuse some things.

Change-Id: I462903099426b4d2e940e749dd958e03a04f7eb1
Reviewed-on: http://gerrit.openafs.org/8149
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>

LINUX: Define printf/uprintf as variadic macros

Instead of defining the string 'printf' itself, make printf (and
uprintf) variadic macros. This avoids renaming printf to printk for
things like '__attribute__((format(printf,X,Y)))'.

Note that this is Linux-specific; compilers on other platforms may not
support variadic macros.

This avoids many warnings in the Linux kernel module build if we
include Linux headers after AFS headers.

Change-Id: I2b8ed67f25e93f559535e40680ecab6fe7579e9c
Reviewed-on: http://gerrit.openafs.org/8150
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Reviewed-by: Marc Dionne <marc.c.dionne@gmail.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>

rx: More afspag-specific objects

For Linux, each object in the kernel module needs to be in only one
module for KBUILD_MODNAME. For AFS_RXERRQ_ENV, we pull in some
additional headers that require KBUILD_MODNAME in rx. So, just add a
few more afspag-specific rx objects.

Change-Id: I80b4a8648141856dffce6e26d5c034dffd8dd5cf
Reviewed-on: http://gerrit.openafs.org/8113
Reviewed-by: Marc Dionne <marc.c.dionne@gmail.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: Andrew Deason <adeason@sinenomine.net>

rx: Do not include linux/module.h

This isn't available in userspace; we don't need it, so just don't
include it at all.

This was introduced in 9cd98379. I had thought it fixed a build
failure, but I believe now I just made a mistake during build.

Change-Id: If97d8e3204b27acd053ec021ddd8cd1527dad3c5
Reviewed-on: http://gerrit.openafs.org/8112
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: Andrew Deason <adeason@sinenomine.net>
Tested-by: Derrick Brashear <shadow@your-file-system.com>

rx: Save errno in LWP rxi_Sendmsg

Much of this code examines errno or WSAGetLastError to determine what
to do. However, some other operations between the actual sendmsg call
and code that examines errno may modify errno. So, save the value of
errno to ensure errno reflects the actual error we got from sendmsg;
this also slightly simplifies some of the logic.

Change-Id: I5a8643fce5d2e29131069743b14805bbc2428805
Reviewed-on: http://gerrit.openafs.org/8110
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>

rx: Split out rxi_NetSendError

This logic is duplicated in a couple of places. Just extract it into
its own little function for easier modification.

Change-Id: Iebcc460698beaee6f1cee4b4fb633b9a10e37213
Reviewed-on: http://gerrit.openafs.org/8109
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: Derrick Brashear <shadow@your-file-system.com>

doc: Fix Solaris 11 kernel module path

For Solaris 11, the module goes in drv, not fs.

Change-Id: Ib297239b845977eaf7e4cdb3edaba32db6733e12
Reviewed-on: http://gerrit.openafs.org/8152
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>

doc: solaris x86 kernel module path

Add instructions for solaris x86 kernel module installation.

Change-Id: Ib6756f609c21867f964a4ab03af322ee4eb1526d
Reviewed-on: http://gerrit.openafs.org/8143
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

doc: fix kindle builds of documentation

Use kindlegen located by the configure stage and test for
kindlegen and dbtoepub before building in all cases.

Change-Id: Ieb46023ddf0725a2c93f96e29f942b71343d53dd
Reviewed-on: http://gerrit.openafs.org/8148
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>

Pretty make output for tsalvaged, lib[u]afs

Change-Id: I852f862c029cad60dc7871ab22367fb266314244
Reviewed-on: http://gerrit.openafs.org/8108
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>

doc: Add quotes to bos create in DAFS QSG section

In appendix C in the QSG, we give an example 'bos create'. The given
-cmd arguments should have quotes, or they will be interpreted as
individual arguments to 'bos create'.

Change-Id: Ie8b0a69908b3419af303716acce51e8d1e97837b
Reviewed-on: http://gerrit.openafs.org/7930
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>

butc: clean xbsa shutdown on control C

when we catch a control-c, do a clean shutdown

Change-Id: I8da28c28d0a238d3642f65c381c399a883d6d4b1
Reviewed-on: http://gerrit.openafs.org/8141
Reviewed-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

quiet build: Define NOQ version of LT_LDLIB_lwp

When the command is invoked within a case statement, we need the
"NOQ" version of RUN_LD.  Add the LT_LDLIB_lwp_NOQ variant and use
it under src/sys where LT_LDLIB_lwp causes a build error.

Change-Id: I5af9c6cbbe9c3cf284d8e9aabb63d53bf5b056ea
Reviewed-on: http://gerrit.openafs.org/8140
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

libuafs: enable 64 bit mode on linux

already safe and being used on other platforms; might as well
here too.

Change-Id: I1fe4c2459caaea873e5618d0b097a142dd935791
Reviewed-on: http://gerrit.openafs.org/8139
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: Derrick Brashear <shadow@your-file-system.com>

libuafs: honor debug vs optimize setting from configure

OPTF should not be forced on if the user specified debugging.
side effect: use the OPTMZ setting for the platform instead
of hardcoding here.

Change-Id: Ib1cd4afebbd037938e2ee18e3bfc347b3690277b
Reviewed-on: http://gerrit.openafs.org/8136
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

afsd: roken.h includes dirent.h; get valid dirent defines on osx

our workaround for #define KERNEL didn't work on OSX because
roken.h included dirent.h before we got the chance. cope with
it.

Change-Id: I5e580aa934cec4e99d62ba105873f71b11326e2f
Reviewed-on: http://gerrit.openafs.org/8132
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Simon Wilkinson <simonxwilkinson@gmail.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

libuafs: use the pic version of opr for perluafs

perluafs is a shared library, therefore we need to use the PIC version
of the opr library (just like any of the other libraries that have two
flavors and get linked with perluafs).

Change-Id: I597f4f40010524d94341d343d3f54648a139f760
Reviewed-on: http://gerrit.openafs.org/8131
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Simon Wilkinson <simonxwilkinson@gmail.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>

make install fixes for libraries

Don't install several libraries that have dependencies that are
not currently installed, but install static libraries.

Fix rule for libafsauthent_pic.a to get the library from .libs

Change-Id: I746b111edf8a6d94ad98fcf235e34b4dac1eb050
Reviewed-on: http://gerrit.openafs.org/8123
Reviewed-by: Simon Wilkinson <simonxwilkinson@gmail.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>

rxkad: silence unused variable warnings in v5gen.c

Sprinkle AFS_UNUSED attributes where the compiler complains
about unused variables.

Note that this file is assembled from code generated by the heimdal
source.  A similar fix exists in the generator code upstream, so
when the file is re-generated in the future it should not be
necessary to re-apply this.

Change-Id: I2ef407428d90157050481d5630f6f22510d65ca3
Reviewed-on: http://gerrit.openafs.org/8122
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>

tests: Convert opr tests to use libtool

Avoid the problems with libopr's dependencies by just converting
the tests to use the libtool version of the opr library. While we're
at it, make the tests pthreaded too.

Change-Id: I4e570b288ea57c758c848be1d545e5ee59771ab9
Reviewed-on: http://gerrit.openafs.org/8127
Reviewed-by: Jason Edgecombe <jason@rampaginggeek.com>
Tested-by: Jason Edgecombe <jason@rampaginggeek.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

Split up libtool support into LWP and pthread

Currently, the type of library you build is determined by whether
the library is build in a pthread, or an lwp build directory. However,
this prevents building an LWP library in a directory that builds
pthreaded clients and servers.

As we want to continue to provide LWP libraries for backwards
compatibility, but move over to pthreaded binaries, this causes
some issues.

So, split up the libtool logic, so we have Makefile.libtool, which
you include if you want to build a pthreaded libtool library, and
Makefile.lwptool, for building a library which supports LWP and
pthreaded use. These only affect how .lo files are built - so the
.o files used for non-library objects are managed with the
Makefile.pthread and Makefile.lwp includes as before.

Change-Id: Ib1af48342253230abab9056eb15a3f79bd77a6de
Reviewed-on: http://gerrit.openafs.org/8126
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

tests: Fix volser Makefile

The volser Makefile had a bad path for liboafs_util, and was still
directly pulling in some objects from the fileserver build. Fix it
so that it uses proper libraries.

Change-Id: Ic36c6a0f93c299bd04d48fa4238c4da5cbc571d4
Reviewed-on: http://gerrit.openafs.org/8125
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jason Edgecombe <jason@rampaginggeek.com>
Tested-by: Jason Edgecombe <jason@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

libafsauthent: fix parallel build

Same logic as ee18ccbe - we have to avoid building libafsauthent.la
and libafsauthent_pic.la at the same time.  Add a dependency to
force make to build them in sequence.

Change-Id: I4b341d7688a249e0067c3917909259c813f26717
Reviewed-on: http://gerrit.openafs.org/8121
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>

FreeBSD major version numbers are multi-character

Do not assume that there is only a single character before the dot.

Change-Id: I45169a6faa5dbeafc4f9c57deaaad96bef8de613
Reviewed-on: http://gerrit.openafs.org/8106
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

opr: Libtool archive should depend on symbol file

There should be a dependency between the libtool archive
liboafs_opr.la and the symbol map for the archive
(liboafs_opr.la.sym) so the archive is rebuilt if symbols are added
to, or removed from, the map file.

Change-Id: Ifb0cd0a8abaa4c9b476c53cf186458ec0b8f8778
Reviewed-on: http://gerrit.openafs.org/8107
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

afsd: Add missing variable for Solaris

The Solaris 11 syscall code was missing a definition for the
'error' variable

Change-Id: Ia9a678435203994e1791824954d8c28c3cdefe17
Reviewed-on: http://gerrit.openafs.org/8103
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: Derrick Brashear <shadow@your-file-system.com>

libafs*: Don't re-export opr/util functions

On Solaris, a library can't re-export functions which come from one
of its dependencies - so libafsrpc can't easily republish the 5 opr
functions that are currently in the libafsrpc map file.
Including the bits of the opr library that define these functions
causes problems with then linking libafsrpc against libopr, which
we do in a number of places.

libafsauthent has exactly the same problem, with a few symbols that
it pulls in from util.

The affected symbols were all added relatively recently, and have
limited uses outside of the OpenAFS tree, so just remove them from
the export list so we are one step closer to building on Solaris
again.

Change-Id: If0a1105320e416ebc013ff670dddd5d247b06f6b
Reviewed-on: http://gerrit.openafs.org/8102
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: Derrick Brashear <shadow@your-file-system.com>

Stop using libafsauthent

Change-Id: Ieead3704e3210a1d88500ad1efa15bd2cad93bf6
Reviewed-on: http://gerrit.openafs.org/8098
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: Derrick Brashear <shadow@your-file-system.com>

libafsauthent: Build with libtool

Construct the libafsauthent library with libtool. All libraries
contributing to libafsauthent provide a libauthent_<library>.la
convenience library, which we use libtool to combine into shared
and static versions of libafsauthent.

Change-Id: I76fa61eb027862eab730c4c86ab74a7b7e03c13b
Reviewed-on: http://gerrit.openafs.org/8097
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: Derrick Brashear <shadow@your-file-system.com>

opr: Add hcrypto to the library list

uuid needs hc_RAND_bytes, which means that liboafs_opr has a dependency
on hcrypto (and, until hcrypto is libtooled, on libroken as well). Make
this dependency explicit.

Change-Id: I748a43f7a2125c12b566502580e149ad1d9c1164
Reviewed-on: http://gerrit.openafs.org/8101
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

ptserver: Fix parallel builds

It's not safe to have libtool building a blah.lo at the same time as
gcc is building blah.o. A Makefile must exclusively use either the .lo
or the .o form.

Fix ptserver so that ptint.xdr.lo is the only one referenced, and just
explicitly pull in the LWP object for the ptserver.

Change-Id: I2e868d2d318c84e20bcccc0ffc462c87e4b7a2f2
Reviewed-on: http://gerrit.openafs.org/8100
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

kauth: Use libtool

Modify the kauth directory so that we use libtool to build its library.
Unlike most of our other directories, kauth has few pthreaded consumers
within the tree, so the libtool library itself is currently unused. The
libtool conversion is done as a stepping point for libafsauthent, which
does include kauth objects.

At the same time, we take the opportunity to modify kaserver so that it
uses libkauth, rather than referencing the library objects directly

Change-Id: I9d261686753b30c415f767603d44c7ce6e10eed1
Reviewed-on: http://gerrit.openafs.org/8095
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

volser: Use libtool

Change-Id: Ic70476aa7258d12aafa7b06ae380012f040c65b6
Reviewed-on: http://gerrit.openafs.org/8094
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

vlserver: Use libtool

Change-Id: I030ec62db64b6dab856d520e68d5d727cd7b8bb3
Reviewed-on: http://gerrit.openafs.org/8093
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

acl: Use libtool

Change-Id: I589fc4d9b12bb23a34ef9145cd699e9ea2c4f496
Reviewed-on: http://gerrit.openafs.org/8092
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

ptserver: Use libtool to build a pthreaded libprot

Use libtool to build a pthreaded version of libprot in src/ptserver.
Make the tptserver directory just build pthreaded versions of the
client and server, and link these against libprot

Change-Id: Idc43de8c548f38584e78b35f9f1ecba3eb4b74d2
Reviewed-on: http://gerrit.openafs.org/8091
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

ubik: Use libtool

Use libtool to build LWP and pthreaded versions of the ubik library.
Both versions are built in the src/ubik directory. src/tubik is modified
to only build pthreaded versions of the ubik test commands.

Replace use of libubik_pthread.a with the libtool generated library.

Change-Id: Id441fe00dbe801e38a108600bfbe06c292383872
Reviewed-on: http://gerrit.openafs.org/8090
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>

libafsrpc: avoid concurrent libtool

libtool gets confused if it is running two instances in the same
directory, so make sure we build libafsrpc.la and libafsrpc_pic.la
one after the other.

Change-Id: Idfd16b1f4e1efe07822a300df798bf05e2df6bcd
Reviewed-on: http://gerrit.openafs.org/8086
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: Derrick Brashear <shadow@your-file-system.com>